[ 0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 333.34 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467311181 ns [ 0.000190] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884619261ns [ 0.007888] Console: colour dummy device 80x25 [ 0.011444] printk: console [tty0] enabled [ 0.012163] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 333.34 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467311181 ns [ 0.000190] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884619261ns [ 0.007888] Console: colour dummy device 80x25 [ 0.011444] printk: console [tty0] enabled [ 0.012163] printk: bootconsole [uart8250] disabled [ 0.014054] Calibrating delay loop... 1059.22 BogoMIPS (lpj=5296128) [ 0.102288] pid_max: default: 32768 minimum: 301 [ 0.103339] LSM: Security Framework initializing [ 0.104362] landlock: Up and running. [ 0.107482] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107627] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.150980] cblist_init_generic: Setting adjustable number of callback queues. [ 0.151204] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.151619] cblist_init_generic: Setting shift to 0 and lim to 1. [ 0.152392] Performance counters: No available PMU. [ 0.153358] rcu: Hierarchical SRCU implementation. [ 0.153427] rcu: Max phase no-delay instances is 1000. [ 0.160050] smp: Bringing up secondary CPUs ... [ 0.160192] smp: Brought up 1 node, 1 CPU [ 0.180136] devtmpfs: initialized [ 0.187711] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.187963] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.196187] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.613557] raid6: int32x8 gen() 236 MB/s [ 0.974130] raid6: int32x4 gen() 636 MB/s [ 1.288631] raid6: int32x2 gen() 735 MB/s [ 1.453294] raid6: int32x1 gen() 390 MB/s [ 1.453430] raid6: using algorithm int32x2 gen() 735 MB/s [ 1.634302] raid6: .... xor() 425 MB/s, rmw enabled [ 1.634433] raid6: using intx1 recovery algorithm [ 1.637721] SCSI subsystem initialized [ 1.638434] usbcore: registered new interface driver usbfs [ 1.638795] usbcore: registered new interface driver hub [ 1.639030] usbcore: registered new device driver usb [ 1.639492] pps_core: LinuxPPS API ver. 1 registered [ 1.639555] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.639730] PTP clock support registered [ 1.655508] PCI host bridge to bus 0000:00 [ 1.655882] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.662401] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.662586] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.664123] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 [ 1.664972] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.665079] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.665162] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.665238] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.665326] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.667747] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.668442] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.668740] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.668883] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.668966] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.669063] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.669140] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.669595] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.669723] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.670396] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.670895] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.671044] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.671614] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.671714] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.671867] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.671957] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.672445] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.672553] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.672720] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.672873] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.673262] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.673360] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.673456] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.673860] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.673960] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.674056] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.675537] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.676920] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.677237] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.677376] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.677483] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.677637] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.677744] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.677861] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.677974] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.678061] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.678125] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.678196] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.678268] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.680052] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 1.680179] pci 0000:00:12.0: vgaarb: bridge control possible [ 1.680283] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.680401] vgaarb: loaded [ 1.682415] clocksource: Switched to clocksource MIPS [ 1.852343] NET: Registered PF_INET protocol family [ 1.853652] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.862863] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.863020] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.863158] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.863397] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.863588] TCP: Hash tables configured (established 2048 bind 2048) [ 1.864754] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.865019] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.866647] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.869739] RPC: Registered named UNIX socket transport module. [ 1.869848] RPC: Registered udp transport module. [ 1.869901] RPC: Registered tcp transport module. [ 1.869948] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.874028] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 1.874890] PCI: CLS 0 bytes, default 16 [ 1.883191] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.901525] NFS: Registering the id_resolver key type [ 1.902896] Key type id_resolver registered [ 1.902988] Key type id_legacy registered [ 1.905699] Key type cifs.idmap registered [ 2.041292] xor: measuring software checksum speed [ 2.061962] 8regs : 954 MB/sec [ 2.073128] 8regs_prefetch : 903 MB/sec [ 2.083801] 32regs : 947 MB/sec [ 2.095016] 32regs_prefetch : 896 MB/sec [ 2.095108] xor: using function: 8regs (954 MB/sec) [ 2.095756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.095973] io scheduler mq-deadline registered [ 2.096106] io scheduler kyber registered [ 2.106480] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.109404] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.110511] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.112991] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.118744] printk: console [ttyS0] disabled [ 2.146498] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.146657] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.174284] printk: console [ttyS0] enabled [ 2.196937] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.197259] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 2.197755] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 2.204868] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 2.206722] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 2.207719] [drm] Found bochs VGA, ID 0xb0c5. [ 2.207951] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 2.211557] [drm] Found EDID data blob. [ 2.218366] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 2.335383] Console: switching to colour frame buffer device 160x50 [ 2.359698] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.397501] brd: module loaded [ 2.398612] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 2.403972] virtio_blk virtio2: [vda] 5791660 512-byte logical blocks (2.97 GB/2.76 GiB) [ 2.434083] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 2.435739] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 2.437008] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 2.447605] hub 1-0:1.0: USB hub found [ 2.450768] hub 1-0:1.0: 2 ports detected [ 2.461791] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.463099] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.467680] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 2.471314] usbcore: registered new interface driver usbhid [ 2.471799] usbhid: USB HID core driver [ 2.473703] u32 classifier [ 2.474025] input device check on [ 2.474408] Actions configured [ 2.476693] NET: Registered PF_INET6 protocol family [ 2.486061] Segment Routing with IPv6 [ 2.486698] In-situ OAM (IOAM) with IPv6 [ 2.487804] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.491466] NET: Registered PF_PACKET protocol family [ 2.493816] Bridge firewalling registered [ 2.495140] Key type dns_resolver registered [ 2.496184] NET: Registered PF_VSOCK protocol family [ 2.504277] registered taskstats version 1 [ 2.522950] Key type .fscrypt registered [ 2.527147] Key type fscrypt-provisioning registered [ 2.543827] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 2.587343] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.604941] Key type encrypted registered [ 2.635618] printk: console [netcon0] enabled [ 2.640116] netconsole: network logging started [ 2.772623] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 3.058973] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 3.073705] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 3.245770] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.373024] IP-Config: Complete: [ 3.394812] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 3.425735] host=192.168.7.8, domain=, nis-domain=(none) [ 3.452078] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.452223] nameserver0=8.8.8.8 [ 3.466755] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.493844] [ 3.529799] md: Waiting for all devices to be available before autodetect [ 3.556606] md: If you don't use raid, use raid=noautodetect [ 3.564553] md: Autodetecting RAID arrays. [ 3.571834] md: autorun ... [ 3.595429] md: ... autorun DONE. [ 3.843100] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 3.852773] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.890202] devtmpfs: mounted [ 3.997774] Freeing unused kernel image (initmem) memory: 368K [ 4.007045] This architecture does not have kernel memory protection. [ 4.012235] Run /sbin/init as init process [ 4.054059] process '/sbin/init.sysvinit' started with executable stack [ 6.976042] udevd[123]: starting version 3.2.11 [ 7.126107] udevd[124]: starting eudev-3.2.11 [ 15.866692] EXT4-fs (vda): re-mounted. Quota mode: disabled. hwclock: Cannot access the Hardware Clock via any known method. hwclock: Use the --verbose option to see the details of our search for an access method. ALSA: Restoring mixer settings... hwclock: Cannot access the Hardware Clock via any known method. hwclock: Use the --verbose option to see the details of our search for an access method. INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting OpenBSD Secure Shell server: sshd done. Starting Xserver Starting rpcbind daemon... done. X.Org X Server 1.21.1.7 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.1.20-yocto-standard #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023 mips Kernel command line: root=/dev/vda rw ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 6 11:46:04 2023 Starting bluetooth: (==) Using system config directory "/usr/share/X11/xorg.conf.d" bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [A[154G[ ok ] Starting Telephony daemon Starting crond: OK Poky (Yocto Project Reference Distro) 4.2 qemumips ttyS0 qemumips login: [ 1633.095419] hellomod: loading out-of-tree module taints kernel. [ 1633.112729] Hello world! [ 1636.512865] Cleaning up hellomod.