[ 1.057130] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.057133] [drm] features: -context_init [ 1.060259] [drm] number of scanouts: 1 [ 1.061170] [drm] number of cap sets: 0 [ 1.062719] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:06.0 on minor 0 [ 1.072180] virtio-pci 0000:00:06.0: [drm] drm_plane_enable_fb_damage_clips() not called [ 1.102773] Console: switching to colour frame buffer device 160x50 [ 1.121345] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.123221] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.129306] brd: module loaded [ 1.130305] virtio_blk virtio2: 4/0/0 default/read/poll queues [ 1.133100] virtio_blk virtio2: [vda] 878520 512-byte logical blocks (450 MB/429 MiB) [ 1.140234] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 1.141401] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 1.143564] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 1.146425] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 1.147573] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 1.149129] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed [ 1.151024] hub 1-0:1.0: USB hub found [ 1.151931] hub 1-0:1.0: 4 ports detected [ 1.153108] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.155125] hub 2-0:1.0: USB hub found [ 1.156011] hub 2-0:1.0: 4 ports detected [ 1.157686] rtc-pl031 9010000.pl031: registered as rtc0 [ 1.158860] rtc-pl031 9010000.pl031: setting system clock to 2023-04-11T09:40:03 UTC (1681206003) [ 1.161234] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.163264] usbcore: registered new interface driver usbhid [ 1.164474] usbhid: USB HID core driver [ 1.165319] u32 classifier [ 1.165926] input device check on [ 1.166731] Actions configured [ 1.167774] NET: Registered PF_INET6 protocol family [ 1.169534] Segment Routing with IPv6 [ 1.170529] In-situ OAM (IOAM) with IPv6 [ 1.171502] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.173206] NET: Registered PF_PACKET protocol family [ 1.174440] Bridge firewalling registered [ 1.175432] Key type dns_resolver registered [ 1.176995] NET: Registered PF_VSOCK protocol family [ 1.178522] registered taskstats version 1 [ 1.179851] Key type .fscrypt registered [ 1.180757] Key type fscrypt-provisioning registered [ 1.183521] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.186506] Key type encrypted registered [ 1.190680] printk: console [netcon0] enabled [ 1.191633] netconsole: network logging started [ 1.211997] IP-Config: Complete: [ 1.212813] device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7 [ 1.214940] host=192.168.7.8, domain=, nis-domain=(none) [ 1.216230] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.216235] nameserver0=8.8.8.8 [ 1.218764] md: Waiting for all devices to be available before autodetect [ 1.220173] md: If you don't use raid, use raid=noautodetect [ 1.221358] md: Autodetecting RAID arrays. [ 1.222212] md: autorun ... [ 1.222829] md: ... autorun DONE. [ 1.243408] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 1.245356] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.247655] devtmpfs: mounted [ 1.250606] Freeing unused kernel memory: 3840K [ 1.265379] Run /sbin/init as init process [ 1.439910] usb 1-1: new high-speed USB device number 2 using xhci_hcd INIT: version 3.04 booting [ 1.598749] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 1.602146] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0 [ 1.735937] usb 1-2: new high-speed USB device number 3 using xhci_hcd Starting udev [ 1.890132] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 1.951669] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0 [ 2.017594] udevd[137]: starting version 3.2.11 [ 2.061727] udevd[138]: starting eudev-3.2.11 [ 2.143951] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2.328532] EXT4-fs (vda): re-mounted. Quota mode: disabled. Configuring packages on first boot.... (This may take several minutes. Please do not power off the machine.) Running postinst /etc/rpm-postinsts/100-sysvinit-inittab... update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-postinsts INIT: Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.2 qemuarm64 hvc0 qemuarm64 login: [ 19.342873] loop: module loaded [ 20.288069] loop0: detected capacity change from 0 to 20480 [ 34.562608] loop0: detected capacity change from 0 to 102400 [ 34.622407] loop1: detected capacity change from 0 to 102400 [ 35.231405] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 35.233953] scsi host0: scsi_debug: version 0191 [20210520] [ 35.233953] dev_size_mb=51, opts=0x0, submit_queues=1, statistics=0 [ 35.251945] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 35.254246] sd 0:0:0:0: Power-on or device reset occurred [ 35.278578] sd 0:0:0:0: [sda] 104448 512-byte logical blocks: (53.5 MB/51.0 MiB) [ 35.284500] sd 0:0:0:0: [sda] Write Protect is off [ 35.293706] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 35.307762] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 35.309262] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 35.347570] sd 0:0:0:0: [sda] Attached SCSI disk [ 35.775125] sda: sda1 sda2 [ 36.011104] sda: sda1 sda2 [ 36.624094] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 36.842646] loop0: detected capacity change from 0 to 102400 [ 36.857292] loop1: detected capacity change from 0 to 102400 [ 46.628147] loop0: detected capacity change from 0 to 8 [ 54.505511] loop0: detected capacity change from 0 to 120 [ 55.838189] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 55.841011] scsi host0: scsi_debug: version 0191 [20210520] [ 55.841011] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 55.859116] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 55.861546] sd 0:0:0:0: Power-on or device reset occurred [ 55.870990] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 55.900146] sd 0:0:0:0: [sda] Write Protect is off [ 55.909395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 55.923341] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 55.924904] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 55.963828] sd 0:0:0:0: [sda] Attached SCSI disk [ 57.011480] sd 0:0:0:0: [sda] Spinning up disk... [ 58.047850] .ready [ 58.219935] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 58.482863] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 58.499779] scsi host0: scsi_debug: version 0191 [20210520] [ 58.499779] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 58.502889] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 58.505327] sd 0:0:0:0: Power-on or device reset occurred [ 58.514815] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 58.520662] sd 0:0:0:0: [sda] Write Protect is off [ 58.529970] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 58.543963] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 58.545387] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 58.584352] sd 0:0:0:0: [sda] Attached SCSI disk [ 59.314456] EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem [ 59.357056] EXT4-fs (sda): mounted filesystem without journal. Quota mode: disabled. [ 59.421530] EXT4-fs (sda): unmounting filesystem. [ 60.444403] sd 0:0:0:0: [sda] Spinning up disk... [ 61.467909] .ready [ 61.576022] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 61.829744] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 61.847644] scsi host0: scsi_debug: version 0191 [20210520] [ 61.847644] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 61.850535] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 61.852829] sd 0:0:0:0: Power-on or device reset occurred [ 61.862108] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 61.876184] sd 0:0:0:0: [sda] Write Protect is off [ 61.885378] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 61.899357] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 61.900974] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 61.939504] sd 0:0:0:0: [sda] Attached SCSI disk [ 62.366083] sda: sda1 sda2 [ 63.344764] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 63.359699] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 63.452211] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 63.466764] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 63.529315] EXT4-fs (sda2): unmounting filesystem. [ 63.587950] EXT4-fs (sda1): unmounting filesystem. [ 64.610822] sd 0:0:0:0: [sda] Spinning up disk... [ 65.627849] .ready [ 65.665734] sda: sda1 sda2 [ 65.747979] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 66.014008] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 66.016523] scsi host0: scsi_debug: version 0191 [20210520] [ 66.016523] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 66.051233] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 66.720125] sd 0:0:0:0: Power-on or device reset occurred [ 66.729919] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 66.786064] sd 0:0:0:0: [sda] Write Protect is off [ 66.795485] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 66.809611] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 66.811002] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 66.857430] sd 0:0:0:0: [sda] Attached SCSI disk [ 67.969290] sda: sda1 sda2 [ 70.073805] sd 0:0:0:0: [sda] Spinning up disk... [ 71.099844] .ready [ 71.137562] sda: sda1 sda2 [ 71.195954] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 71.431790] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 71.435323] scsi host0: scsi_debug: version 0191 [20210520] [ 71.435323] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 71.438166] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 71.440184] sd 0:0:0:0: Power-on or device reset occurred [ 71.449402] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 71.455082] sd 0:0:0:0: [sda] Write Protect is off [ 71.464309] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 71.478284] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 71.479709] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 71.517976] sd 0:0:0:0: [sda] Attached SCSI disk [ 71.907356] sda: sda1 sda2 [ 72.876520] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 72.923359] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 73.015545] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 73.030011] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 73.105250] EXT4-fs (sda2): unmounting filesystem. [ 73.163557] EXT4-fs (sda1): unmounting filesystem. [ 74.186635] sd 0:0:0:0: [sda] Spinning up disk... [ 75.195843] .ready [ 75.235277] sda: sda1 sda2 [ 75.367998] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 75.721762] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 75.727711] scsi host0: scsi_debug: version 0191 [20210520] [ 75.727711] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 75.730727] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 75.732704] sd 0:0:0:0: Power-on or device reset occurred [ 75.757525] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 75.759107] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 75.764239] sd 0:0:0:0: [sda] Write Protect is off [ 75.773305] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 75.787118] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 75.788445] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 75.826658] sd 0:0:0:0: [sda] Attached SCSI disk [ 76.768600] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 76.919948] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 77.179947] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 77.182261] scsi host0: scsi_debug: version 0191 [20210520] [ 77.182261] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 77.200742] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 77.202886] sd 0:0:0:0: Power-on or device reset occurred [ 77.212348] sd 0:0:0:0: [sda] physical block alignment offset: 3584 [ 77.213652] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 77.215107] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 77.220279] sd 0:0:0:0: [sda] Write Protect is off [ 77.229365] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 77.243139] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 77.244591] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 77.282750] sd 0:0:0:0: [sda] Attached SCSI disk [ 78.241531] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 78.403961] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 78.637777] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 78.655249] scsi host0: scsi_debug: version 0191 [20210520] [ 78.655249] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 78.658004] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 78.660110] sd 0:0:0:0: Power-on or device reset occurred [ 78.669334] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 78.670869] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 78.676056] sd 0:0:0:0: [sda] Write Protect is off [ 78.685159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 78.703194] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 78.704724] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 78.742997] sd 0:0:0:0: [sda] Attached SCSI disk [ 79.170035] sda: sda1 sda2 [ 79.411938] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 79.666933] loop0: detected capacity change from 0 to 102400 [ 79.950203] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 79.952672] scsi host0: scsi_debug: version 0191 [20210520] [ 79.952672] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 79.971168] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 79.973507] sd 0:0:0:0: Power-on or device reset occurred [ 79.982851] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 79.990712] sd 0:0:0:0: [sda] Write Protect is off [ 79.999943] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 80.029443] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 80.030802] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 80.069690] sd 0:0:0:0: [sda] Attached SCSI disk [ 81.018843] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 81.212131] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 82.453718] loop0: detected capacity change from 0 to 20480 [ 82.564671] loop0: detected capacity change from 20480 to 40960 [ 89.684931] loop0: detected capacity change from 0 to 10240 [ 89.708981] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 89.712819] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 89.724036] EXT4-fs (loop0): unmounting filesystem. [ 91.733516] NET: Registered PF_ALG protocol family [ 98.753293] loop0: detected capacity change from 0 to 20480 [ 98.805844] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 98.809291] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 98.830315] EXT4-fs (loop0): unmounting filesystem. [ 98.866958] loop0: detected capacity change from 0 to 20480 [ 98.870228] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 98.873586] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 98.878577] EXT4-fs (loop0): unmounting filesystem. [ 98.922511] loop0: detected capacity change from 0 to 20480 [ 98.929578] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 98.933094] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 99.004675] EXT4-fs (loop0): unmounting filesystem. [ 99.069229] loop0: detected capacity change from 0 to 20480 [ 99.072727] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 99.075968] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 99.085984] EXT4-fs (loop0): unmounting filesystem. [ 99.122334] loop0: detected capacity change from 0 to 20480 [ 99.129594] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 99.132822] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 99.142478] EXT4-fs (loop0): unmounting filesystem. [ 99.208809] loop0: detected capacity change from 0 to 20478 [ 99.268413] loop0: detected capacity change from 0 to 20480 [ 99.352605] loop0: detected capacity change from 0 to 20480 [ 99.574270] loop0: detected capacity change from 0 to 20480 [ 99.577762] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 99.588195] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 99.597737] EXT4-fs (loop0): unmounting filesystem. [ 99.603896] loop0: detected capacity change from 0 to 10240 [ 99.606327] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 99.609589] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 99.614931] loop1: detected capacity change from 0 to 10240 [ 99.617821] EXT4-fs (loop1): mounting ext2 file system using the ext4 subsystem [ 99.620968] EXT4-fs (loop1): mounted filesystem without journal. Quota mode: disabled. [ 99.626136] EXT4-fs (loop0): unmounting filesystem. [ 99.631963] EXT4-fs (loop1): unmounting filesystem. [ 99.637866] loop0: detected capacity change from 0 to 10240 [ 106.810823] loop0: detected capacity change from 0 to 20480 [ 106.900626] loop0: detected capacity change from 0 to 18432 [ 106.962548] loop0: detected capacity change from 0 to 6144 [ 107.066596] loop0: detected capacity change from 0 to 6144 [ 107.479159] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 107.481662] scsi host0: scsi_debug: version 0191 [20210520] [ 107.481662] dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0 [ 107.500950] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 107.503418] sd 0:0:0:0: Power-on or device reset occurred [ 107.512784] sd 0:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB) [ 107.518458] sd 0:0:0:0: [sda] Write Protect is off [ 107.527696] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 107.555264] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 107.556833] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 107.595012] sd 0:0:0:0: [sda] Attached SCSI disk [ 107.626056] loop0: detected capacity change from 0 to 22528 [ 107.730380] loop0: detected capacity change from 0 to 20480 [ 107.838379] loop0: detected capacity change from 0 to 6144 [ 107.941822] loop0: detected capacity change from 0 to 6144 [ 108.075949] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 108.340010] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 108.342334] scsi host0: scsi_debug: version 0191 [20210520] [ 108.342334] dev_size_mb=11, opts=0x0, submit_queues=1, statistics=0 [ 108.345480] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 108.347540] sd 0:0:0:0: Power-on or device reset occurred [ 108.373387] sd 0:0:0:0: [sda] 22528 512-byte logical blocks: (11.5 MB/11.0 MiB) [ 108.379273] sd 0:0:0:0: [sda] Write Protect is off [ 108.388585] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 108.402599] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 108.404046] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 108.442444] sd 0:0:0:0: [sda] Attached SCSI disk [ 108.472470] loop0: detected capacity change from 0 to 22528 [ 108.495955] loop0: detected capacity change from 0 to 22528 [ 108.588008] loop0: detected capacity change from 0 to 22528 [ 108.712941] loop0: detected capacity change from 0 to 2048 [ 108.718981] loop1: detected capacity change from 0 to 2048 [ 108.815500] loop0: detected capacity change from 0 to 4096 [ 108.899532] loop0: detected capacity change from 0 to 20480 [ 108.980527] loop0: detected capacity change from 0 to 22528 [ 109.064105] loop0: detected capacity change from 0 to 2048 [ 109.069748] loop1: detected capacity change from 0 to 18432 [ 109.203864] loop0: detected capacity change from 0 to 22528 [ 109.281852] loop0: detected capacity change from 0 to 22528 [ 109.403989] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 115.329306] loop0: detected capacity change from 0 to 10240 [ 123.655222] loop0: detected capacity change from 0 to 10240 [ 123.693838] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 123.697737] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 123.716438] EXT4-fs (loop0): unmounting filesystem. [ 123.986702] loop0: detected capacity change from 0 to 10240 [ 124.012424] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 124.016405] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 124.028908] EXT4-fs (loop0): unmounting filesystem. [ 124.066314] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 124.070070] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 124.083876] EXT4-fs (loop0): unmounting filesystem. [ 124.159596] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 124.162729] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 124.190233] EXT4-fs (loop0): unmounting filesystem. [ 124.241422] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 124.244669] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 124.257845] EXT4-fs (loop0): unmounting filesystem. [ 124.538529] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 124.550358] scsi host0: scsi_debug: version 0191 [20210520] [ 124.550358] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 124.553610] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 124.555878] sd 0:0:0:0: Power-on or device reset occurred [ 124.565309] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 124.586428] sd 0:0:0:0: [sda] Write Protect is off [ 124.595782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 124.625169] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 124.626740] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 124.665262] sd 0:0:0:0: [sda] Attached SCSI disk [ 125.548517] sda: sda1 sda2 sda3 sda4 [ 126.537549] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 127.333922] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 127.493983] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 127.508783] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 127.515131] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 127.525467] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 127.678767] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: disabled. [ 127.737878] EXT4-fs (sda1): unmounting filesystem. [ 127.791959] EXT4-fs (sda2): unmounting filesystem. [ 127.797764] EXT4-fs (sda3): unmounting filesystem. [ 127.847277] EXT4-fs (sda4): unmounting filesystem. [ 128.033353] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: disabled. [ 128.093169] EXT4-fs (sda4): unmounting filesystem. [ 128.135120] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 128.149500] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 128.423144] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 128.438800] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 128.445070] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 128.454902] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 128.582939] EXT4-fs (sda1): unmounting filesystem. [ 128.636817] EXT4-fs (sda2): unmounting filesystem. [ 128.642536] EXT4-fs (sda3): unmounting filesystem. [ 128.716291] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 128.726854] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 128.737370] EXT4-fs (sda3): unmounting filesystem. [ 128.771621] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 128.826222] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 128.834567] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 128.844623] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 128.850558] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 128.860594] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 129.009587] EXT4-fs (sda4): orphan cleanup on readonly fs [ 129.011161] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: disabled. [ 129.026243] EXT4-fs (sda1): unmounting filesystem. [ 129.027779] EXT4-fs (sda2): unmounting filesystem. [ 129.029183] EXT4-fs (sda3): unmounting filesystem. [ 129.030556] EXT4-fs (sda4): unmounting filesystem. [ 129.074913] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 129.089231] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 129.095526] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 129.109982] EXT4-fs (sda2): mounted filesystem without journal. Quota mode: disabled. [ 129.116432] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 129.130692] EXT4-fs (sda3): mounted filesystem without journal. Quota mode: disabled. [ 129.285433] EXT4-fs (sda4): mounted filesystem with ordered data mode. Quota mode: disabled. [ 129.343615] EXT4-fs (sda1): unmounting filesystem. [ 129.397714] EXT4-fs (sda2): unmounting filesystem. [ 129.451498] EXT4-fs (sda3): unmounting filesystem. [ 129.505471] EXT4-fs (sda4): unmounting filesystem. [ 129.771960] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 130.406387] loop0: detected capacity change from 0 to 102400 [ 130.522682] BTRFS: device fsid 18905ab6-00af-45dc-88d7-96858805a325 devid 1 transid 6 /dev/loop0 scanned by mkfs.btrfs (21002) [ 130.549606] loop1: detected capacity change from 0 to 102400 [ 130.555390] BTRFS info (device loop1): using crc32c (crc32c-generic) checksum algorithm [ 130.557197] BTRFS info (device loop1): using free space tree [ 130.560954] BTRFS info (device loop1): enabling ssd optimizations [ 130.562443] BTRFS info (device loop1): checking UUID tree [ 130.604548] BTRFS info (device loop1): setting incompat feature flag for DEFAULT_SUBVOL (0x2) [ 130.668222] BTRFS: device fsid 18905ab6-00af-45dc-88d7-96858805a325 devid 1 transid 11 /dev/loop0 scanned by mount (21048) [ 130.670774] BTRFS info (device loop0): using crc32c (crc32c-generic) checksum algorithm [ 130.672390] BTRFS info (device loop0): using free space tree [ 130.772440] BTRFS: device fsid 18905ab6-00af-45dc-88d7-96858805a325 devid 1 transid 12 /dev/loop0 scanned by mount (21092) [ 130.775074] BTRFS info (device loop0): using crc32c (crc32c-generic) checksum algorithm [ 130.776818] BTRFS info (device loop0): using free space tree [ 130.980209] loop0: detected capacity change from 0 to 10240 [ 131.195131] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 131.199184] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 131.213577] EXT4-fs (loop0): unmounting filesystem. [ 131.246915] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 131.250479] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 131.263987] EXT4-fs (loop0): unmounting filesystem. [ 131.429239] loop0: detected capacity change from 0 to 10240 [ 131.472277] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 131.475908] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 131.488484] EXT4-fs (loop0): unmounting filesystem. [ 131.727650] loop0: detected capacity change from 0 to 10240 [ 131.770654] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 131.774217] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 131.795110] EXT4-fs (loop0): unmounting filesystem. [ 131.939963] loop0: detected capacity change from 0 to 10240 [ 131.999601] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.003575] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.018415] EXT4-fs (loop0): unmounting filesystem. [ 132.094491] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.097851] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.112238] EXT4-fs (loop0): unmounting filesystem. [ 132.145851] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.149330] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.163887] EXT4-fs (loop0): unmounting filesystem. [ 132.338937] loop0: detected capacity change from 0 to 10240 [ 132.410441] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.414296] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.437600] EXT4-fs (loop0): unmounting filesystem. [ 132.469801] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.473694] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.489874] EXT4-fs (loop0): unmounting filesystem. [ 132.665905] loop0: detected capacity change from 0 to 10240 [ 132.733069] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 132.736660] EXT4-fs (loop0): mounted filesystem without journal. Quota mode: disabled. [ 132.751426] EXT4-fs (loop0): unmounting filesystem. [ 132.782164] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 133.033343] loop0: detected capacity change from 0 to 10240 [ 133.038370] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 133.355594] loop0: detected capacity change from 0 to 10240 [ 133.397507] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 133.601857] loop0: detected capacity change from 0 to 10240 [ 133.664799] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 133.711727] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 133.765030] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 133.949186] loop0: detected capacity change from 0 to 10240 [ 134.008937] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 134.070909] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 134.249903] loop0: detected capacity change from 0 to 10240 [ 134.319896] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 134.366038] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 134.549541] loop0: detected capacity change from 0 to 10240 [ 134.594874] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 134.647059] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 135.080033] loop0: detected capacity change from 0 to 10240 [ 135.083331] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 135.228873] loop0: detected capacity change from 0 to 10240 [ 135.251284] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 135.265763] EXT4-fs (loop0): re-mounted. Quota mode: disabled. [ 135.679891] loop0: detected capacity change from 0 to 10240 [ 135.705863] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 135.745978] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 136.135716] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 136.151289] scsi host0: scsi_debug: version 0191 [20210520] [ 136.151289] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 136.154152] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 136.156167] sd 0:0:0:0: Power-on or device reset occurred [ 136.165442] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 136.171067] sd 0:0:0:0: [sda] Write Protect is off [ 136.180281] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 136.194371] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 136.195872] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 136.234399] sd 0:0:0:0: [sda] Attached SCSI disk [ 136.997833] sda: sda1 sda2 sda3 sda4 [ 138.303948] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 138.591101] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 138.867567] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 139.074580] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 139.382691] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 139.488459] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 140.003936] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 140.359435] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 140.361838] scsi host0: scsi_debug: version 0191 [20210520] [ 140.361838] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 140.405981] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 140.408340] sd 0:0:0:0: Power-on or device reset occurred [ 140.456209] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 140.484537] sd 0:0:0:0: [sda] Write Protect is off [ 140.493773] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 140.507774] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 140.509204] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 140.553524] sd 0:0:0:0: [sda] Attached SCSI disk [ 141.379592] sda: sda1 sda2 sda3 sda4 [ 142.482659] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem [ 142.635677] EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem [ 142.829613] EXT4-fs (sda3): mounting ext2 file system using the ext4 subsystem [ 142.935679] EXT4-fs (sda4): mounting ext2 file system using the ext4 subsystem [ 143.323971] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 143.601721] loop0: detected capacity change from 0 to 10240 [ 143.644896] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 143.693041] EXT4-fs (loop0): mounting ext2 file system using the ext4 subsystem [ 144.108965] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 144.126671] scsi host0: scsi_debug: version 0191 [20210520] [ 144.126671] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 144.129914] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 144.132082] sd 0:0:0:0: Power-on or device reset occurred [ 144.141547] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 144.173270] sd 0:0:0:0: [sda] Write Protect is off [ 144.182640] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 144.196708] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 144.198107] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 144.236564] sd 0:0:0:0: [sda] Attached SCSI disk [ 145.104236] sda: sda1 sda2 sda3 [ 145.591979] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 178.761455] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 178.782769] scsi host0: scsi_debug: version 0191 [20210520] [ 178.782769] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 178.786095] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 178.788084] sd 0:0:0:0: Power-on or device reset occurred [ 178.797401] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 178.798923] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 178.804018] sd 0:0:0:0: [sda] Write Protect is off [ 178.813161] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 178.835660] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 178.837277] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 178.875920] sd 0:0:0:0: [sda] Attached SCSI disk [ 179.908380] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 180.453288] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 181.797181] sda: sda1 sda2 sda3 [ 182.891093] sda: sda1 [ 184.400664] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 186.019337] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 187.115976] sda: sda1 [ 187.589300] sda: sda1 [ 188.732208] sda: sda1 sda2 < > [ 189.592884] sda: sda1 sda2 < > [ 191.503482] sda: sda1 sda2 < > [ 192.019725] sda: sda1 sda2 < > [ 193.427992] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 193.916376] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 195.267883] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 195.753684] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > [ 196.862012] sda: sda1 [ 198.117356] sda: sda1 sda3 [ 199.417998] sda: sda1 sda2 [ 200.871135] sda: sda1 sda2 sda3 sda4 [ 202.120588] sda: sda1 sda2 sda3 [ 202.311958] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 202.568974] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 202.571423] scsi host0: scsi_debug: version 0191 [20210520] [ 202.571423] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 202.574486] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 202.576675] sd 0:0:0:0: Power-on or device reset occurred [ 202.596603] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 202.598199] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 202.616761] sd 0:0:0:0: [sda] Write Protect is off [ 202.625976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 202.639946] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 202.641431] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 202.679780] sd 0:0:0:0: [sda] Attached SCSI disk [ 204.040101] sda: sda1 sda2 sda3 sda4 [ 205.849546] sda: sda1 sda2 sda3 sda4 [ 207.837070] sda: sda1 sda2 sda3 sda4 [ 207.975915] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 208.308884] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 208.311289] scsi host0: scsi_debug: version 0191 [20210520] [ 208.311289] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 208.314076] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 208.316182] sd 0:0:0:0: Power-on or device reset occurred [ 208.354999] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 208.356906] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 208.376055] sd 0:0:0:0: [sda] Write Protect is off [ 208.385450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 208.399576] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 208.401085] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 208.449452] sd 0:0:0:0: [sda] Attached SCSI disk [ 209.809741] sda: sda1 sda2 sda3 sda4 sda5 [ 210.575046] sda: sda1 sda2 sda3 sda4 sda5 [ 211.293297] sda: sda1 sda2 sda3 sda4 sda5 [ 212.014087] sda: sda1 sda2 sda3 sda4 sda5 [ 212.732450] sda: sda1 sda2 sda3 sda4 sda5 [ 213.450823] sda: sda1 sda2 sda3 sda4 sda5 [ 214.350810] sda: sda1 sda2 sda3 sda4 sda5 [ 215.232293] sda: sda1 sda2 sda3 sda4 sda5 [ 216.115999] sda: sda1 sda2 sda3 sda4 sda5 [ 217.143849] sda: sda1 sda2 sda3 sda4 sda5 [ 218.165903] sda: sda1 sda2 sda3 sda4 sda5 [ 219.181774] sda: sda1 sda2 sda3 sda4 sda5 [ 221.735019] sda: sda1 sda2 sda3 sda4 [ 223.586949] sda: sda1 [ 224.314081] sda: sda1 [ 226.112893] sda: sda1 sda2 sda3 sda4 [ 226.837899] sda: sda1 sda2 sda3 sda4 [ 226.971943] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 227.259349] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 227.261853] scsi host0: scsi_debug: version 0191 [20210520] [ 227.261853] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 227.282648] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 227.284787] sd 0:0:0:0: Power-on or device reset occurred [ 227.294060] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 227.314832] sd 0:0:0:0: [sda] Write Protect is off [ 227.324109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 227.338087] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 227.346664] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 227.385071] sd 0:0:0:0: [sda] Attached SCSI disk [ 227.961682] sda: sda1 [ 228.971178] sda: sda1 [ 229.629022] sda: sda1 [ 230.319942] sda: sda1 [ 231.171950] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 231.981247] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 232.005253] scsi host0: scsi_debug: version 0191 [20210520] [ 232.005253] dev_size_mb=100, opts=0x0, submit_queues=1, statistics=0 [ 232.009384] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 232.011470] sd 0:0:0:0: Power-on or device reset occurred [ 232.046203] sd 0:0:0:0: [sda] 204800 512-byte logical blocks: (105 MB/100 MiB) [ 232.076064] sd 0:0:0:0: [sda] Write Protect is off [ 232.085360] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 232.099274] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 232.100758] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 232.143505] sd 0:0:0:0: [sda] Attached SCSI disk [ 233.224200] sda: sda1 [ 233.735360] sda: sda1 [ 234.265825] sda: sda1 [ 234.886544] sda: sda1 [ 235.413076] sda: sda1 [ 236.039751] sda: sda1 [ 236.579431] sda: sda1 [ 237.117954] sda: sda1 [ 237.640375] sda: sda1 [ 238.170163] sda: sda1 [ 238.694867] sda: sda1 [ 239.317778] sda: sda1 [ 239.848093] sda: sda1 [ 240.495526] sda: sda1 sda2 [ 241.106865] sda: sda1 sda2 sda3 [ 241.605356] sda: sda1 sda2 sda3 [ 242.156932] sda: sda1 sda2 sda3 [ 243.596437] sda: sda1 [ 244.349452] sda: sda1 [ 245.129570] sda: sda1 [ 245.896474] sda: sda1 [ 246.669134] sda: sda1 [ 247.441917] sda: sda1 [ 248.282183] sda: sda1 [ 249.052811] sda: sda1 [ 249.901738] sda: sda1 [ 250.669975] sda: sda1 [ 251.493914] sda: sda1 [ 252.260376] sda: sda1 [ 253.019729] sda: sda1 [ 253.909375] sda: sda1 sda2 [ 254.786299] sda: sda1 sda2 sda3 [ 255.525565] sda: sda1 sda2 sda3 [ 256.316238] sda: sda1 sda2 sda3 [ 257.768456] sda: sda1 sda2 sda3 < sda5 sda6 > sda4 [ 258.270805] sda: sda1 sda2 sda3 < sda5 sda6 > sda4 [ 258.407917] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 258.629388] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 258.631456] scsi host0: scsi_debug: version 0191 [20210520] [ 258.631456] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 258.652937] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 258.661143] sd 0:0:0:0: Power-on or device reset occurred [ 258.685621] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 258.687498] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 258.692863] sd 0:0:0:0: [sda] Write Protect is off [ 258.702190] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 258.731428] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 258.733032] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 258.771342] sd 0:0:0:0: [sda] Attached SCSI disk [ 260.098998] sda: sda1 sda2 sda3 sda4 [ 261.902848] sda: sda1 sda2 sda3 sda4 [ 263.859732] sda: sda1 sda2 sda3 sda4 [ 265.919952] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 266.234347] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 266.298058] scsi host0: scsi_debug: version 0191 [20210520] [ 266.298058] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 266.340513] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 266.369949] sd 0:0:0:0: Power-on or device reset occurred [ 266.405435] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 266.406961] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 266.449163] sd 0:0:0:0: [sda] Write Protect is off [ 266.458278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 266.485125] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 266.486489] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 266.530003] sd 0:0:0:0: [sda] Attached SCSI disk [ 271.700162] sda: sda1 [ 273.436628] sda: sda1 [ 273.904346] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 274.328087] loop0: detected capacity change from 0 to 10240 [ 274.366791] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 274.648393] loop0: detected capacity change from 0 to 10240 [ 274.682818] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 274.881439] loop0: detected capacity change from 0 to 10240 [ 274.913798] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 275.097514] loop0: detected capacity change from 0 to 10240 [ 275.179859] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 275.408952] loop0: detected capacity change from 0 to 10240 [ 275.449251] Adding 5116k swap on /dev/loop0. Priority:-2 extents:1 across:5116k [ 277.874895] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 277.890780] scsi host0: scsi_debug: version 0191 [20210520] [ 277.890780] dev_size_mb=50, opts=0x0, submit_queues=1, statistics=0 [ 277.907019] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 277.909145] sd 0:0:0:0: Power-on or device reset occurred [ 277.933430] sd 0:0:0:0: [sda] 102400 512-byte logical blocks: (52.4 MB/50.0 MiB) [ 277.939107] sd 0:0:0:0: [sda] Write Protect is off [ 277.948268] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 277.962140] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 277.963710] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes [ 278.001745] sda: sda1 sda2 [ 278.002829] sd 0:0:0:0: [sda] Attached SCSI disk [ 279.047935] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 279.192026] udevd[29534]: starting version 3.2.11 [ 279.197106] udevd[29535]: starting eudev-3.2.11