[ 0.000000] Linux version 5.15.103-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Sat Mar 18 03:05:03 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU) [ 0.000000] FPU revision is: 007f0000 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000090000000-0x00000000afffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff] [ 0.000000] percpu: Embedded 24 pages/cpu s61216 r8192 d28896 u98304 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 185343 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 720484K/786428K available (12663K kernel code, 1894K rwdata, 2864K rodata, 412K init, 350K bss, 65944K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU frequency 333.34 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467301409 ns [ 0.000135] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884607997ns [ 0.012529] Console: colour dummy device 80x25 [ 0.013167] printk: console [tty0] enabled [ 0.013952] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 5.15.103-yocto-standard (oe-user@oe-host) (mips64-poky-linux-gcc (GCC) 11.3.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Sat Mar 18 03:05:03 UTC 2023 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00010000 (MIPS GENERIC QEMU) [ 0.000000] FPU revision is: 007f0000 [ 0.000000] OF: fdt: No chosen node found, continuing without [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] node 0: [mem 0x0000000090000000-0x00000000afffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000afffefff] [ 0.000000] percpu: Embedded 24 pages/cpu s61216 r8192 d28896 u98304 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 185343 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 720484K/786428K available (12663K kernel code, 1894K rwdata, 2864K rodata, 412K init, 350K bss, 65944K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU frequency 333.34 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467301409 ns [ 0.000135] sched_clock: 32 bits at 166MHz, resolution 5ns, wraps every 12884607997ns [ 0.012529] Console: colour dummy device 80x25 [ 0.013167] printk: console [tty0] enabled [ 0.013952] printk: bootconsole [uart8250] disabled [ 0.016054] Calibrating delay loop... 801.17 BogoMIPS (lpj=4005888) [ 0.051944] pid_max: default: 32768 minimum: 301 [ 0.053110] LSM: Security Framework initializing [ 0.054434] landlock: Up and running. [ 0.057094] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.057268] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.101386] Performance counters: Either hardware does not support performance counters, or not yet implemented. [ 0.102924] rcu: Hierarchical SRCU implementation. [ 0.110485] smp: Bringing up secondary CPUs ... [ 0.110658] smp: Brought up 1 node, 1 CPU [ 0.126979] devtmpfs: initialized [ 0.136190] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.136458] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.147989] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.423689] raid6: int64x8 gen() 328 MB/s [ 0.595297] raid6: int64x8 xor() 291 MB/s [ 0.772636] raid6: int64x4 gen() 867 MB/s [ 0.951161] raid6: int64x4 xor() 499 MB/s [ 1.123174] raid6: int64x2 gen() 1009 MB/s [ 1.301776] raid6: int64x2 xor() 591 MB/s [ 1.496200] raid6: int64x1 gen() 875 MB/s [ 1.668012] raid6: int64x1 xor() 465 MB/s [ 1.668199] raid6: using algorithm int64x2 gen() 1009 MB/s [ 1.668286] raid6: .... xor() 591 MB/s, rmw enabled [ 1.668448] raid6: using intx1 recovery algorithm [ 1.675741] vgaarb: loaded [ 1.677569] SCSI subsystem initialized [ 1.678464] usbcore: registered new interface driver usbfs [ 1.678893] usbcore: registered new interface driver hub [ 1.679188] usbcore: registered new device driver usb [ 1.679705] pps_core: LinuxPPS API ver. 1 registered [ 1.679780] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.679974] PTP clock support registered [ 1.700711] PCI host bridge to bus 0000:00 [ 1.701147] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.701834] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.702073] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.704325] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 [ 1.705252] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.705369] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.705567] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.705666] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.705778] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.708632] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.709433] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.709759] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.709938] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.710033] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.710152] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.710241] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.710701] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.710829] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.711562] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.712128] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.712321] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.712935] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.713037] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.713211] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.713307] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.713832] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.714272] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.714386] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.714571] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.714745] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.715151] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.715255] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.715357] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.715933] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.716038] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.716140] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.716942] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.718666] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.719081] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.719248] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.719486] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.719675] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.719794] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.719929] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.720061] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.720166] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.720243] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.720326] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.720401] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.723319] clocksource: Switched to clocksource MIPS [ 1.885623] NET: Registered PF_INET protocol family [ 1.887061] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.911038] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 1.911264] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.911496] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.911832] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 1.912189] TCP: Hash tables configured (established 8192 bind 8192) [ 1.914081] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.914451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.916461] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.925605] RPC: Registered named UNIX socket transport module. [ 1.925743] RPC: Registered udp transport module. [ 1.925810] RPC: Registered tcp transport module. [ 1.925870] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.927163] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 1.928134] PCI: CLS 0 bytes, default 32 [ 2.497415] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 2.516133] NFS: Registering the id_resolver key type [ 2.517715] Key type id_resolver registered [ 2.517820] Key type id_legacy registered [ 2.520956] Key type cifs.idmap registered [ 2.567493] xor: measuring software checksum speed [ 2.575610] 8regs : 1331 MB/sec [ 2.583702] 8regs_prefetch : 1289 MB/sec [ 2.591191] 32regs : 1352 MB/sec [ 2.599554] 32regs_prefetch : 1255 MB/sec [ 2.599715] xor: using function: 32regs (1352 MB/sec) [ 2.600302] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.600562] io scheduler mq-deadline registered [ 2.600717] io scheduler kyber registered [ 2.606619] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.609918] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.611129] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.614233] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.620922] printk: console [ttyS0] disabled [ 2.645622] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.645822] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.674353] printk: console [ttyS0] enabled [ 2.697247] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.697641] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 2.698405] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 2.708568] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 2.709748] [drm] Found bochs VGA, ID 0xb0c5. [ 2.710011] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 2.713885] random: crng init done [ 2.715780] [drm] Found EDID data blob. [ 2.722314] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 2.805003] Console: switching to colour frame buffer device 128x48 [ 2.821270] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.857782] brd: module loaded [ 2.864708] virtio_blk virtio2: [vda] 4748884 512-byte logical blocks (2.43 GB/2.26 GiB) [ 2.890838] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.891677] ehci-pci: EHCI PCI platform driver [ 2.895771] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.896430] ohci-pci: OHCI PCI platform driver [ 2.901168] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.902564] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.908176] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 2.912090] usbcore: registered new interface driver usbhid [ 2.912646] usbhid: USB HID core driver [ 2.913894] u32 classifier [ 2.914220] input device check on [ 2.914573] Actions configured [ 2.917106] NET: Registered PF_INET6 protocol family [ 2.927360] Segment Routing with IPv6 [ 2.928901] In-situ OAM (IOAM) with IPv6 [ 2.930178] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.934332] NET: Registered PF_PACKET protocol family [ 2.935913] Bridge firewalling registered [ 2.937560] Key type dns_resolver registered [ 2.938736] NET: Registered PF_VSOCK protocol family [ 2.950783] Key type .fscrypt registered [ 2.965734] Key type fscrypt-provisioning registered [ 2.980556] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 3.018376] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.050268] Key type encrypted registered [ 3.061282] printk: console [netcon0] enabled [ 3.076770] netconsole: network logging started [ 3.674854] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.774144] IP-Config: Complete: [ 3.792405] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 3.806430] host=192.168.7.2, domain=, nis-domain=(none) [ 3.806513] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.806668] nameserver0=8.8.8.8 [ 3.857817] md: Waiting for all devices to be available before autodetect [ 3.870659] md: If you don't use raid, use raid=noautodetect [ 3.889589] md: Autodetecting RAID arrays. [ 3.900912] md: autorun ... [ 3.911240] md: ... autorun DONE. [ 3.928316] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.991918] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled. [ 4.001934] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.016357] devtmpfs: mounted [ 4.073090] Freeing unused kernel image (initmem) memory: 412K [ 4.082171] This architecture does not have kernel memory protection. [ 4.095306] Run /sbin/init as init process [ 4.129969] process '/sbin/init.sysvinit' started with executable stack [ 7.330568] udevd[118]: starting version 3.2.10 [ 7.459905] udevd[119]: starting eudev-3.2.10 [ 21.341777] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled. hwclock: Cannot access the Hardware Clock via any known method. hwclock: Use the --verbose option to see the details of our search for an access method. ALSA: Restoring mixer settings... INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting OpenBSD Secure Shell server: sshd done. Starting Xserver Starting rpcbind daemon... done. X.Org X Server 1.21.1.7 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips64 5.15.103-yocto-standard #1 SMP PREEMPT Sat Mar 18 03:05:03 UTC 2023 mips64 Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty printk.time=1 Current version of pixman: 0.40.0 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 12 20:44:42 2023 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting bluetooth: bluetoothd. hwclock: Cannot access the Hardware Clock via any known method. hwclock: Use the --verbose option to see the details of our search for an access method. Starting syslogd/klogd: done The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86EmojiPicker * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-PipFJsO0r7,guid=28ac5291db4aa3ed83fae65764371841 [A[122G[ ok ] Starting Telephony daemon Using calibration data stored in /etc/pointercal.xinput No makedumpfile found. Starting crond: OK Using calibration data stored in /etc/pointercal.xinput Poky (Yocto Project Reference Distro) 4.0.9 qemumips64 ttyS0 qemumips64 login: [ 3359.457575] hellomod: loading out-of-tree module taints kernel. [ 3359.501727] Hello world! [ 3366.129432] Cleaning up hellomod.