[    0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.34 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467392505 ns
[    0.000193] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884710397ns
[    0.007989] Console: colour dummy device 80x25
[    0.011609] printk: console [tty0] enabled
[    0.012239] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.34 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467392505 ns
[    0.000193] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884710397ns
[    0.007989] Console: colour dummy device 80x25
[    0.011609] printk: console [tty0] enabled
[    0.012239] printk: bootconsole [uart8250] disabled
[    0.014158] Calibrating delay loop... 1036.28 BogoMIPS (lpj=5181440)
[    0.102530] pid_max: default: 32768 minimum: 301
[    0.103560] LSM: Security Framework initializing
[    0.104604] landlock: Up and running.
[    0.107773] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.107923] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.153755] cblist_init_generic: Setting adjustable number of callback queues.
[    0.153987] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.154423] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.155222] Performance counters: No available PMU.
[    0.156227] rcu: Hierarchical SRCU implementation.
[    0.156300] rcu: 	Max phase no-delay instances is 1000.
[    0.164278] smp: Bringing up secondary CPUs ...
[    0.164430] smp: Brought up 1 node, 1 CPU
[    0.177241] devtmpfs: initialized
[    0.185069] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.185334] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.193927] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.612766] raid6: int32x8  gen()   235 MB/s
[    0.969801] raid6: int32x4  gen()   590 MB/s
[    1.308738] raid6: int32x2  gen()   656 MB/s
[    1.478763] raid6: int32x1  gen()   386 MB/s
[    1.478910] raid6: using algorithm int32x2 gen() 656 MB/s
[    1.650707] raid6: .... xor() 372 MB/s, rmw enabled
[    1.650895] raid6: using intx1 recovery algorithm
[    1.654126] SCSI subsystem initialized
[    1.654898] usbcore: registered new interface driver usbfs
[    1.655287] usbcore: registered new interface driver hub
[    1.655530] usbcore: registered new device driver usb
[    1.656015] pps_core: LinuxPPS API ver. 1 registered
[    1.656081] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.656254] PTP clock support registered
[    1.672297] PCI host bridge to bus 0000:00
[    1.672677] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.673743] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.673921] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.675470] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    1.676242] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    1.676348] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    1.676435] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    1.676514] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    1.676604] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    1.679071] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    1.679768] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    1.680061] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    1.680205] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.680291] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.680391] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.680471] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.680918] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    1.681145] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    1.681797] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    1.682302] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.682462] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.683072] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    1.683166] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    1.683311] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    1.683402] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.683896] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    1.684002] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    1.684166] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.684328] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    1.684735] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    1.684835] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    1.684933] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.685347] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    1.685455] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    1.685556] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.686297] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.687695] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    1.688047] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    1.688216] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    1.688329] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    1.700064] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    1.700178] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    1.700305] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    1.700428] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    1.700521] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    1.700590] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    1.700667] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    1.700745] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    1.702686] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.702828] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.702937] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.703064] vgaarb: loaded
[    1.705214] clocksource: Switched to clocksource MIPS
[    1.862938] NET: Registered PF_INET protocol family
[    1.864232] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.873711] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.873876] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.874021] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.874268] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.874471] TCP: Hash tables configured (established 2048 bind 2048)
[    1.875752] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.876032] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.877713] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.880904] RPC: Registered named UNIX socket transport module.
[    1.881017] RPC: Registered udp transport module.
[    1.881075] RPC: Registered tcp transport module.
[    1.881126] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.882342] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.883212] PCI: CLS 0 bytes, default 16
[    1.891621] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.910384] NFS: Registering the id_resolver key type
[    1.911666] Key type id_resolver registered
[    1.911757] Key type id_legacy registered
[    1.914491] Key type cifs.idmap registered
[    2.056276] xor: measuring software checksum speed
[    2.068448]    8regs           :   857 MB/sec
[    2.080923]    8regs_prefetch  :   805 MB/sec
[    2.092834]    32regs          :   854 MB/sec
[    2.105884]    32regs_prefetch :   772 MB/sec
[    2.105987] xor: using function: 8regs (857 MB/sec)
[    2.106642] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.106869] io scheduler mq-deadline registered
[    2.107009] io scheduler kyber registered
[    2.113796] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    2.120750] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    2.121787] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    2.124044] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.130155] printk: console [ttyS0] disabled
[    2.154561] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.155622] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    2.178337] printk: console [ttyS0] enabled
[    2.200573] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.200843] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    2.201275] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    2.208453] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    2.219917] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    2.220882] [drm] Found bochs VGA, ID 0xb0c5.
[    2.221107] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    2.224951] [drm] Found EDID data blob.
[    2.231439] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    2.324394] Console: switching to colour frame buffer device 160x50
[    2.350827] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    2.393187] brd: module loaded
[    2.394362] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    2.400056] virtio_blk virtio2: [vda] 40092 512-byte logical blocks (20.5 MB/19.6 MiB)
[    2.428859] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    2.430586] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    2.431894] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    2.442988] hub 1-0:1.0: USB hub found
[    2.444100] hub 1-0:1.0: 2 ports detected
[    2.455781] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.457117] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.462010] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    2.467065] usbcore: registered new interface driver usbhid
[    2.467557] usbhid: USB HID core driver
[    2.468530] u32 classifier
[    2.468861]     input device check on
[    2.479628]     Actions configured
[    2.482157] NET: Registered PF_INET6 protocol family
[    2.493397] Segment Routing with IPv6
[    2.494096] In-situ OAM (IOAM) with IPv6
[    2.495369] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.499185] NET: Registered PF_PACKET protocol family
[    2.500335] Bridge firewalling registered
[    2.501683] Key type dns_resolver registered
[    2.502796] NET: Registered PF_VSOCK protocol family
[    2.515996] registered taskstats version 1
[    2.536642] Key type .fscrypt registered
[    2.544993] Key type fscrypt-provisioning registered
[    2.568231] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.575594] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    2.614213] Key type encrypted registered
[    2.643704] printk: console [netcon0] enabled
[    2.653957] netconsole: network logging started
[    2.755413] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    3.046603] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    3.061164] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    3.218641] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    3.345893] IP-Config: Complete:
[    3.369301]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    3.402480]      host=192.168.7.6, domain=, nis-domain=(none)
[    3.430641]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.430842]      nameserver0=8.8.8.8
[    3.478246] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    3.523900] md: Waiting for all devices to be available before autodetect
[    3.541510] md: If you don't use raid, use raid=noautodetect
[    3.563346] md: Autodetecting RAID arrays.
[    3.600028] md: autorun ...
[    3.621345] md: ... autorun DONE.
[    3.722025] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    3.739315] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    3.754192] devtmpfs: mounted
[    3.847348] Freeing unused kernel image (initmem) memory: 368K
[    3.854884] This architecture does not have kernel memory protection.
[    3.859824] Run /sbin/init as init process
[    3.897216] process '/sbin/init.sysvinit' started with executable stack
[    6.727498] udevd[112]: starting version 3.2.11
[    6.880178] udevd[113]: starting eudev-3.2.11
[    8.310342] EXT4-fs (vda): re-mounted. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.2 qemumips /dev/ttyS0

qemumips login: 