[    0.665656] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.666021] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.670264] Serial: AMBA PL011 UART driver
[    0.785443] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1
[    0.813742] printk: console [ttyAMA0] enabled
[    0.967034] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.992206] cryptd: max_cpu_qlen set to 1000
[    1.208794] raid6: neonx8   gen()   178 MB/s
[    1.414678] raid6: neonx4   gen()   408 MB/s
[    1.592567] raid6: neonx2   gen()   468 MB/s
[    1.792718] raid6: neonx1   gen()   543 MB/s
[    2.009878] raid6: int32x8  gen()    37 MB/s
[    2.211890] raid6: int32x4  gen()    66 MB/s
[    2.483929] raid6: int32x2  gen()   190 MB/s
[    2.681068] raid6: int32x1  gen()   211 MB/s
[    2.681590] raid6: using algorithm neonx1 gen() 543 MB/s
[    2.878466] raid6: .... xor() 259 MB/s, rmw enabled
[    2.879290] raid6: using neon recovery algorithm
[    2.889951] SCSI subsystem initialized
[    2.892495] usbcore: registered new interface driver usbfs
[    2.893869] usbcore: registered new interface driver hub
[    2.894660] usbcore: registered new device driver usb
[    2.896157] pps_core: LinuxPPS API ver. 1 registered
[    2.896439] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.896988] PTP clock support registered
[    2.940225] vgaarb: loaded
[    2.989866] clocksource: Switched to clocksource arch_sys_counter
[    3.134765] NET: Registered PF_INET protocol family
[    3.139018] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    3.173675] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    3.174379] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    3.174913] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    3.175638] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    3.176385] TCP: Hash tables configured (established 4096 bind 4096)
[    3.184982] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.185885] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    3.191121] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    3.205750] RPC: Registered named UNIX socket transport module.
[    3.206213] RPC: Registered udp transport module.
[    3.206454] RPC: Registered tcp transport module.
[    3.206679] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    3.207230] PCI: CLS 0 bytes, default 64
[    3.933589] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    4.040962] NFS: Registering the id_resolver key type
[    4.044475] Key type id_resolver registered
[    4.044937] Key type id_legacy registered
[    4.061734] Key type cifs.idmap registered
[    4.342409] xor: measuring software checksum speed
[    4.372926]    arm4regs        :   360 MB/sec
[    4.406017]    8regs           :   452 MB/sec
[    4.434270]    32regs          :   444 MB/sec
[    4.456779]    neon            :   704 MB/sec
[    4.457443] xor: using function: neon (704 MB/sec)
[    4.457884] async_tx: api initialized (async)
[    4.465974] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    4.466618] io scheduler mq-deadline registered
[    4.467002] io scheduler kyber registered
[    4.488409] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges:
[    4.491803] pci-host-generic 3f000000.pcie:       IO 0x003eff0000..0x003effffff -> 0x0000000000
[    4.494381] pci-host-generic 3f000000.pcie:      MEM 0x0010000000..0x003efeffff -> 0x0010000000
[    4.497214] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f]
[    4.504128] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00
[    4.505401] pci_bus 0000:00: root bus resource [bus 00-0f]
[    4.505831] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    4.506156] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
[    4.513807] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
[    4.528195] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00
[    4.543957] pci 0000:00:01.0: reg 0x10: [io  0x0000-0x001f]
[    4.545952] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    4.546464] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    4.550430] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330
[    4.551329] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[    4.555234] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000
[    4.555885] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff]
[    4.556250] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    4.564549] PCI: bus0: Fast back to back transfers disabled
[    4.572504] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref]
[    4.573604] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit]
[    4.574133] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref]
[    4.574583] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff]
[    4.574930] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff]
[    4.575306] pci 0000:00:01.0: BAR 0: assigned [io  0x1000-0x101f]
[    4.578883] pci 0000:00:02.0: enabling device (0100 -> 0102)
[    4.610454] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103)
[    4.619839] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102)
[    4.745676] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0
[    4.753931] [drm] features: -virgl +edid -resource_blob -host_visible
[    4.754112] [drm] features: -context_init
[    4.760997] [drm] number of scanouts: 1
[    4.761642] printk: console [hvc0] enabled
[    4.827392] [drm] number of cap sets: 0
[    4.858971] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    5.036375] virtio-pci 0000:00:03.0: [drm] drm_plane_enable_fb_damage_clips() not called
[    5.218866] Console: switching to colour frame buffer device 160x50
[    5.351741] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    5.619155] brd: module loaded
[    5.622001] virtio_blk virtio1: 1/0/0 default/read/poll queues
[    5.635231] virtio_blk virtio1: [vda] 887290 512-byte logical blocks (454 MB/433 MiB)
[    5.717915] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    5.730909] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[    5.747797] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010
[    5.770035] xhci_hcd 0000:00:02.0: xHCI Host Controller
[    5.771289] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    5.772249] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed
[    5.802176] hub 1-0:1.0: USB hub found
[    5.805125] hub 1-0:1.0: 4 ports detected
[    5.833281] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.841928] hub 2-0:1.0: USB hub found
[    5.843202] hub 2-0:1.0: 4 ports detected
[    5.927117] rtc-pl031 9010000.pl031: registered as rtc0
[    5.934088] rtc-pl031 9010000.pl031: setting system clock to 2023-04-18T18:29:56 UTC (1681842596)
[    5.955120] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    5.997375] usbcore: registered new interface driver usbhid
[    5.999356] usbhid: USB HID core driver
[    6.002781] u32 classifier
[    6.003929]     input device check on
[    6.004788]     Actions configured
[    6.013396] NET: Registered PF_INET6 protocol family
[    6.054558] Segment Routing with IPv6
[    6.056722] In-situ OAM (IOAM) with IPv6
[    6.059575] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    6.074056] NET: Registered PF_PACKET protocol family
[    6.084650] Bridge firewalling registered
[    6.113338] Key type dns_resolver registered
[    6.149789] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    6.155441] NET: Registered PF_VSOCK protocol family
[    6.160849] Registering SWP/SWPB emulation handler
[    6.300685] registered taskstats version 1
[    6.307435] Key type .fscrypt registered
[    6.308198] Key type fscrypt-provisioning registered
[    6.335256] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    6.344354] Key type encrypted registered
[    6.536036] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0
[    6.562799] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0
[    6.718108] printk: console [netcon0] enabled
[    6.719115] netconsole: network logging started
[    6.729418] usb 1-2: new high-speed USB device number 3 using xhci_hcd
[    6.831554] IP-Config: Complete:
[    6.832433]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    6.833630]      host=192.168.7.2, domain=, nis-domain=(none)
[    6.834062]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    6.834173]      nameserver0=8.8.8.8
[    6.863770] md: Waiting for all devices to be available before autodetect
[    6.866221] md: If you don't use raid, use raid=noautodetect
[    6.868069] md: Autodetecting RAID arrays.
[    6.899049] md: autorun ...
[    6.899754] md: ... autorun DONE.
[    7.013144] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1
[    7.081489] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0
[    7.178162] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    7.185324] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    7.194175] devtmpfs: mounted
[    7.650771] Freeing unused kernel image (initmem) memory: 2048K
[    8.176168] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[   13.912864] udevd[177]: starting version 3.2.11
[   14.315688] udevd[178]: starting eudev-3.2.11
[   24.939846] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[   26.823468] uart-pl011 9000000.pl011: no DMA platform data
ALSA: Restoring mixer settings...
Configuring packages on first boot....
 (This may take several minutes. Please do not power off the machine.)
Running postinst /etc/rpm-postinsts/100-sysvinit-inittab...
update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing)
 Removing any system startup links for run-postinsts ...
  /etc/rcS.d/S99run-postinsts
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.
Starting rpcbind daemon...
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemuarm 6.1.20-yocto-standard #1 SMP PREEMPT Sat Mar 18 02:48:26 UTC 2023 armv7l
Kernel command line: root=/dev/vda rw  mem=512M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyAMA0 console=hvc0 vmalloc=256  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 18 18:30:35 2023
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.2 qemuarm /dev/hvc0

qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-MtSOCgJ9TZ,guid=0f6ee7070cf7ad2e90e6aa0d643ee1d4
Using calibration data stored in /etc/pointercal.xinput
Using calibration data stored in /etc/pointercal.xinput
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

[settings daemon] Forking. run with -n to prevent fork
dbus-daemon[623]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=605 comm="connman-applet")
matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12)
dbus-daemon[623]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
