[    0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.32 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467982313 ns
[    0.000225] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12885372924ns
[    0.011892] Console: colour dummy device 80x25
[    0.012653] printk: console [tty0] enabled
[    0.013345] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.32 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467982313 ns
[    0.000225] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12885372924ns
[    0.011892] Console: colour dummy device 80x25
[    0.012653] printk: console [tty0] enabled
[    0.013345] printk: bootconsole [uart8250] disabled
[    0.015382] Calibrating delay loop... 1099.36 BogoMIPS (lpj=5496832)
[    0.082305] pid_max: default: 32768 minimum: 301
[    0.083370] LSM: Security Framework initializing
[    0.084402] landlock: Up and running.
[    0.087591] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.087739] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.136508] cblist_init_generic: Setting adjustable number of callback queues.
[    0.136755] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.137220] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.138018] Performance counters: No available PMU.
[    0.139038] rcu: Hierarchical SRCU implementation.
[    0.139107] rcu: 	Max phase no-delay instances is 1000.
[    0.145992] smp: Bringing up secondary CPUs ...
[    0.146148] smp: Brought up 1 node, 1 CPU
[    0.168248] devtmpfs: initialized
[    0.176244] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.176521] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.185191] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.671209] raid6: int32x8  gen()   261 MB/s
[    1.014200] raid6: int32x4  gen()   647 MB/s
[    1.317261] raid6: int32x2  gen()   719 MB/s
[    1.494684] raid6: int32x1  gen()   414 MB/s
[    1.494835] raid6: using algorithm int32x2 gen() 719 MB/s
[    1.672707] raid6: .... xor() 434 MB/s, rmw enabled
[    1.672822] raid6: using intx1 recovery algorithm
[    1.675990] SCSI subsystem initialized
[    1.676683] usbcore: registered new interface driver usbfs
[    1.677034] usbcore: registered new interface driver hub
[    1.677262] usbcore: registered new device driver usb
[    1.677712] pps_core: LinuxPPS API ver. 1 registered
[    1.677773] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.677940] PTP clock support registered
[    1.693099] PCI host bridge to bus 0000:00
[    1.693452] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.745161] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.745344] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.746802] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    1.747530] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    1.747635] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    1.747715] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    1.747788] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    1.747879] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    1.750259] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    1.750941] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    1.751229] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    1.751365] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.751445] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.751539] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.751613] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.752057] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    1.752169] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    1.752763] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    1.753243] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.753388] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.753947] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    1.754034] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    1.754166] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    1.754254] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.754725] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    1.754825] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    1.754987] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.755235] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    1.755612] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    1.755706] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    1.755796] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.756178] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    1.756270] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    1.756360] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.757174] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.758734] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    1.759089] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    1.759254] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    1.759356] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    1.759504] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    1.759599] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    1.759710] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    1.759822] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    1.759935] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    1.760007] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    1.760086] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    1.760186] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    1.762150] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.762296] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.762397] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.762513] vgaarb: loaded
[    1.764653] clocksource: Switched to clocksource MIPS
[    2.043686] NET: Registered PF_INET protocol family
[    2.045079] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.054005] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.054274] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.054415] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    2.054652] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    2.054873] TCP: Hash tables configured (established 2048 bind 2048)
[    2.056057] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.056317] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.057956] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.061003] RPC: Registered named UNIX socket transport module.
[    2.061110] RPC: Registered udp transport module.
[    2.061163] RPC: Registered tcp transport module.
[    2.061210] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.073712] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    2.074621] pci 0000:00:0a.2: quirk_usb_early_handoff+0x0/0x940 took 12765 usecs
[    2.075054] PCI: CLS 0 bytes, default 16
[    2.082903] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    2.100357] NFS: Registering the id_resolver key type
[    2.101643] Key type id_resolver registered
[    2.101736] Key type id_legacy registered
[    2.104616] Key type cifs.idmap registered
[    2.237243] xor: measuring software checksum speed
[    2.247604]    8regs           :  1002 MB/sec
[    2.258507]    8regs_prefetch  :   911 MB/sec
[    2.269050]    32regs          :   951 MB/sec
[    2.280095]    32regs_prefetch :   943 MB/sec
[    2.280182] xor: using function: 8regs (1002 MB/sec)
[    2.280678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.280884] io scheduler mq-deadline registered
[    2.281009] io scheduler kyber registered
[    2.287222] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    2.289981] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    2.291000] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    2.296552] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.302360] printk: console [ttyS0] disabled
[    2.337355] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.337480] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    2.363487] printk: console [ttyS0] enabled
[    2.384708] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.385002] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    2.385411] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    2.391924] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    2.393708] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    2.395688] [drm] Found bochs VGA, ID 0xb0c5.
[    2.395933] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    2.399540] [drm] Found EDID data blob.
[    2.405945] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    2.543903] Console: switching to colour frame buffer device 160x50
[    2.566650] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    2.608934] brd: module loaded
[    2.610039] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    2.615276] virtio_blk virtio2: [vda] 40092 512-byte logical blocks (20.5 MB/19.6 MiB)
[    2.668160] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    2.672001] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    2.673294] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    2.681582] hub 1-0:1.0: USB hub found
[    2.682530] hub 1-0:1.0: 2 ports detected
[    2.795414] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.796653] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.801503] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    2.805563] usbcore: registered new interface driver usbhid
[    2.806032] usbhid: USB HID core driver
[    2.806988] u32 classifier
[    2.807310]     input device check on
[    2.807660]     Actions configured
[    2.809998] NET: Registered PF_INET6 protocol family
[    2.818614] Segment Routing with IPv6
[    2.819289] In-situ OAM (IOAM) with IPv6
[    2.820523] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.828477] NET: Registered PF_PACKET protocol family
[    2.829510] Bridge firewalling registered
[    2.830716] Key type dns_resolver registered
[    2.831925] NET: Registered PF_VSOCK protocol family
[    2.844407] registered taskstats version 1
[    2.853374] Key type .fscrypt registered
[    2.869930] Key type fscrypt-provisioning registered
[    2.883546] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    2.906770] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.951455] Key type encrypted registered
[    2.990612] printk: console [netcon0] enabled
[    2.999442] netconsole: network logging started
[    3.054709] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    3.346635] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    3.361105] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    3.548223] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    3.705123] IP-Config: Complete:
[    3.729702] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    3.758253]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    3.771028]      host=192.168.7.2, domain=, nis-domain=(none)
[    3.794333]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.794475]      nameserver0=8.8.8.8
[    3.845399] md: Waiting for all devices to be available before autodetect
[    3.878773] md: If you don't use raid, use raid=noautodetect
[    3.897565] md: Autodetecting RAID arrays.
[    3.914323] md: autorun ...
[    3.920951] md: ... autorun DONE.
[    4.059132] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    4.078869] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    4.100498] devtmpfs: mounted
[    4.196130] Freeing unused kernel image (initmem) memory: 368K
[    4.204268] This architecture does not have kernel memory protection.
[    4.209995] Run /sbin/init as init process
[    4.266224] process '/sbin/init.sysvinit' started with executable stack
[    6.593610] udevd[111]: starting version 3.2.11
[    6.738721] udevd[112]: starting eudev-3.2.11
[    8.205026] EXT4-fs (vda): re-mounted. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.2 qemumips /dev/ttyS0

qemumips login: 