[    0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.35 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11466941105 ns
[    0.000345] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884203517ns
[    0.020071] Console: colour dummy device 80x25
[    0.024475] printk: console [tty0] enabled
[    0.025603] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.35 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11466941105 ns
[    0.000345] sched_clock: 32 bits at 167MHz, resolution 5ns, wraps every 12884203517ns
[    0.020071] Console: colour dummy device 80x25
[    0.024475] printk: console [tty0] enabled
[    0.025603] printk: bootconsole [uart8250] disabled
[    0.029058] Calibrating delay loop... 910.13 BogoMIPS (lpj=4550656)
[    0.066093] pid_max: default: 32768 minimum: 301
[    0.067931] LSM: Security Framework initializing
[    0.069830] landlock: Up and running.
[    0.075715] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.076037] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.145918] cblist_init_generic: Setting adjustable number of callback queues.
[    0.146356] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.147114] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.148496] Performance counters: No available PMU.
[    0.150340] rcu: Hierarchical SRCU implementation.
[    0.150469] rcu: 	Max phase no-delay instances is 1000.
[    0.165366] smp: Bringing up secondary CPUs ...
[    0.165693] smp: Brought up 1 node, 1 CPU
[    0.189619] devtmpfs: initialized
[    0.205023] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.205565] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.221573] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.705809] raid6: int32x8  gen()   122 MB/s
[    1.060127] raid6: int32x4  gen()   300 MB/s
[    1.409528] raid6: int32x2  gen()   415 MB/s
[    1.760660] raid6: int32x1  gen()   214 MB/s
[    1.760975] raid6: using algorithm int32x2 gen() 415 MB/s
[    2.121539] raid6: .... xor() 227 MB/s, rmw enabled
[    2.121862] raid6: using intx1 recovery algorithm
[    2.127916] SCSI subsystem initialized
[    2.129224] usbcore: registered new interface driver usbfs
[    2.129876] usbcore: registered new interface driver hub
[    2.130309] usbcore: registered new device driver usb
[    2.131118] pps_core: LinuxPPS API ver. 1 registered
[    2.131231] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.131528] PTP clock support registered
[    2.161521] PCI host bridge to bus 0000:00
[    2.162276] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    2.163883] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    2.164202] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.180923] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    2.182365] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    2.182567] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    2.182715] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    2.182856] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    2.183018] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    2.187716] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    2.189926] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    2.190497] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    2.190773] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    2.190923] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    2.191102] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    2.191246] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    2.192179] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    2.192403] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    2.193449] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    2.194342] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    2.194610] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    2.195727] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    2.195907] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    2.196163] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    2.196332] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.197264] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    2.197444] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    2.197726] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.197983] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    2.198729] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    2.198899] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    2.199070] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.200257] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    2.200433] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    2.200606] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.201963] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    2.204439] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    2.205069] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    2.205320] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    2.205512] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    2.205813] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    2.205992] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    2.206211] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    2.206418] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    2.206577] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    2.206695] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    2.206829] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    2.206965] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    2.210864] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    2.211157] pci 0000:00:12.0: vgaarb: bridge control possible
[    2.211341] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    2.211568] vgaarb: loaded
[    2.215531] clocksource: Switched to clocksource MIPS
[    2.545295] NET: Registered PF_INET protocol family
[    2.547680] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.565437] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.565804] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.566070] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    2.566520] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    2.566875] TCP: Hash tables configured (established 2048 bind 2048)
[    2.569091] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.569636] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.572873] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.579378] RPC: Registered named UNIX socket transport module.
[    2.579669] RPC: Registered udp transport module.
[    2.579788] RPC: Registered tcp transport module.
[    2.579880] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.581726] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    2.583174] PCI: CLS 0 bytes, default 16
[    2.600142] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    2.639783] NFS: Registering the id_resolver key type
[    2.642079] Key type id_resolver registered
[    2.642292] Key type id_legacy registered
[    2.647863] Key type cifs.idmap registered
[    2.952753] xor: measuring software checksum speed
[    2.982259]    8regs           :   468 MB/sec
[    3.005486]    8regs_prefetch  :   435 MB/sec
[    3.027297]    32regs          :   463 MB/sec
[    3.050379]    32regs_prefetch :   455 MB/sec
[    3.050712] xor: using function: 8regs (468 MB/sec)
[    3.051959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.052356] io scheduler mq-deadline registered
[    3.052592] io scheduler kyber registered
[    3.072401] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    3.078545] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    3.080338] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    3.084131] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    3.097159] printk: console [ttyS0] disabled
[    3.126055] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.126358] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    3.168574] printk: console [ttyS0] enabled
[    3.196004] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.196507] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    3.197582] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    3.219085] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    3.222583] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    3.224191] [drm] Found bochs VGA, ID 0xb0c5.
[    3.226534] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    3.233240] [drm] Found EDID data blob.
[    3.249329] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    3.384814] Console: switching to colour frame buffer device 160x50
[    3.420125] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    3.512218] brd: module loaded
[    3.514206] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    3.531401] virtio_blk virtio2: [vda] 40260 512-byte logical blocks (20.6 MB/19.7 MiB)
[    3.578877] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    3.582171] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    3.588345] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    3.609898] hub 1-0:1.0: USB hub found
[    3.611798] hub 1-0:1.0: 2 ports detected
[    3.625998] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.629797] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.642144] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    3.649250] usbcore: registered new interface driver usbhid
[    3.652321] usbhid: USB HID core driver
[    3.654377] u32 classifier
[    3.663570]     input device check on
[    3.664239]     Actions configured
[    3.669310] NET: Registered PF_INET6 protocol family
[    3.684859] Segment Routing with IPv6
[    3.686093] In-situ OAM (IOAM) with IPv6
[    3.688451] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.696315] NET: Registered PF_PACKET protocol family
[    3.698956] Bridge firewalling registered
[    3.701637] Key type dns_resolver registered
[    3.710590] NET: Registered PF_VSOCK protocol family
[    3.752217] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.766869] registered taskstats version 1
[    3.810239] Key type .fscrypt registered
[    3.820003] Key type fscrypt-provisioning registered
[    3.864987] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    3.929511] Key type encrypted registered
[    3.984221] printk: console [netcon0] enabled
[    4.023391] netconsole: network logging started
[    4.045355] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    4.349521] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    4.362051] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    4.487715] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    4.585570] IP-Config: Complete:
[    4.604385] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    4.615185]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    4.644849]      host=192.168.7.2, domain=, nis-domain=(none)
[    4.654042]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    4.654179]      nameserver0=8.8.8.8
[    4.736695] md: Waiting for all devices to be available before autodetect
[    4.768236] md: If you don't use raid, use raid=noautodetect
[    4.786897] md: Autodetecting RAID arrays.
[    4.822271] md: autorun ...
[    4.844994] md: ... autorun DONE.
[    4.959932] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    4.983328] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    5.015712] devtmpfs: mounted
[    5.150440] Freeing unused kernel image (initmem) memory: 368K
[    5.172646] This architecture does not have kernel memory protection.
[    5.191738] Run /sbin/init as init process
[    5.250107] process '/sbin/init.sysvinit' started with executable stack
[    7.034369] udevd[112]: starting version 3.2.11
[    7.149292] udevd[113]: starting eudev-3.2.11
[    8.398703] EXT4-fs (vda): re-mounted. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.2 qemumips /dev/ttyS0

qemumips login: 