[ 1.808442] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.808446] [drm] features: -context_init [ 1.824351] [drm] number of scanouts: 1 [ 1.825422] [drm] number of cap sets: 0 [ 1.827730] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:06.0 on minor 0 [ 1.837527] virtio-pci 0000:00:06.0: [drm] drm_plane_enable_fb_damage_clips() not called [ 1.847175] Console: switching to colour frame buffer device 160x50 [ 1.903308] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.905296] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.911891] brd: module loaded [ 1.915233] virtio_blk virtio2: 4/0/0 default/read/poll queues [ 1.918885] virtio_blk virtio2: [vda] 896192 512-byte logical blocks (459 MB/438 MiB) [ 1.933273] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 1.934672] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 1.937103] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 1.940263] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 1.941549] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 1.943149] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed [ 1.945140] hub 1-0:1.0: USB hub found [ 1.946076] hub 1-0:1.0: 4 ports detected [ 1.947371] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.949500] hub 2-0:1.0: USB hub found [ 1.950439] hub 2-0:1.0: 4 ports detected [ 1.952442] rtc-pl031 9010000.pl031: registered as rtc0 [ 1.953752] rtc-pl031 9010000.pl031: setting system clock to 2023-04-23T01:23:01 UTC (1682212981) [ 1.956274] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 1.958732] usbcore: registered new interface driver usbhid [ 1.959976] usbhid: USB HID core driver [ 1.960933] u32 classifier [ 1.961701] input device check on [ 1.962547] Actions configured [ 1.963674] NET: Registered PF_INET6 protocol family [ 1.965891] Segment Routing with IPv6 [ 1.966851] In-situ OAM (IOAM) with IPv6 [ 1.967763] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.969750] NET: Registered PF_PACKET protocol family [ 1.971080] Bridge firewalling registered [ 1.972025] Key type dns_resolver registered [ 1.973327] NET: Registered PF_VSOCK protocol family [ 1.974839] registered taskstats version 1 [ 1.976033] Key type .fscrypt registered [ 1.976895] Key type fscrypt-provisioning registered [ 1.979928] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no [ 1.982868] Key type encrypted registered [ 1.987370] printk: console [netcon0] enabled [ 1.988561] netconsole: network logging started [ 2.009396] IP-Config: Complete: [ 2.010352] device=eth0, hwaddr=52:54:00:12:34:12, ipaddr=192.168.7.18, mask=255.255.255.0, gw=192.168.7.17 [ 2.012382] host=192.168.7.18, domain=, nis-domain=(none) [ 2.013724] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.013733] nameserver0=8.8.8.8 [ 2.016576] md: Waiting for all devices to be available before autodetect [ 2.018148] md: If you don't use raid, use raid=noautodetect [ 2.019273] md: Autodetecting RAID arrays. [ 2.020151] md: autorun ... [ 2.020787] md: ... autorun DONE. [ 2.046071] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled. [ 2.047933] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 2.049935] devtmpfs: mounted [ 2.054924] Freeing unused kernel memory: 3840K [ 2.066081] Run /sbin/init as init process INIT: version 3.04 booting [ 2.217464] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.376678] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 2.379937] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0 [ 2.517438] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 2.669460] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 Starting udev [ 2.729711] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0 [ 2.950792] udevd[138]: starting version 3.2.11 [ 2.961534] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2.973135] udevd[139]: starting eudev-3.2.11 [ 3.251527] EXT4-fs (vda): re-mounted. Quota mode: disabled. Configuring packages on first boot.... (This may take several minutes. Please do not power off the machine.) Running postinst /etc/rpm-postinsts/100-sysvinit-inittab... update-rc.d: /etc/init.d/run-postinsts exists during rc.d purge (continuing) Removing any system startup links for run-postinsts ... /etc/rcS.d/S99run-postinsts INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.2 qemuarm64 /dev/hvc0 qemuarm64 login: [ 28.461594] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 28.487547] scsi host0: scsi_debug: version 0191 [20210520] [ 28.487547] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 28.514884] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 28.517240] sd 0:0:0:0: Power-on or device reset occurred [ 28.528128] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 28.534289] sd 0:0:0:0: [sda] Write Protect is off [ 28.543824] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 28.558438] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 28.560160] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 28.600440] sd 0:0:0:0: [sda] Attached SCSI disk [ 29.033693] sda: sda1 [ 30.361565] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 30.632884] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 30.635770] scsi host0: scsi_debug: version 0191 [20210520] [ 30.635770] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 30.639130] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 30.641754] sd 0:0:0:0: Power-on or device reset occurred [ 30.676483] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 30.682569] sd 0:0:0:0: [sda] Write Protect is off [ 30.692124] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 30.706637] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 30.708276] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 30.747542] sd 0:0:0:0: [sda] Attached SCSI disk [ 31.060731] sda: [ 32.233637] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 32.605456] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 32.608402] scsi host0: scsi_debug: version 0191 [20210520] [ 32.608402] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 32.611992] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 32.614687] sd 0:0:0:0: Power-on or device reset occurred [ 32.624102] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 32.630167] sd 0:0:0:0: [sda] Write Protect is off [ 32.639567] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.678546] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 32.680189] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 32.719537] sd 0:0:0:0: [sda] Attached SCSI disk [ 33.739587] EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem [ 33.755012] EXT4-fs (sda): mounted filesystem without journal. Quota mode: disabled. [ 33.907836] EXT4-fs (sda): unmounting filesystem. [ 34.162117] sda: sda1 [ 35.319944] udevd[2466]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 35.319950] udevd[2459]: inotify_add_watch(6, /dev/sda2, 10) failed: No such file or directory [ 35.320509] udevd[2459]: inotify_add_watch(6, /dev/sda2, 10) failed: No such file or directory [ 35.321572] udevd[2466]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 35.323829] udevd[2459]: inotify_add_watch(6, /dev/sda2, 10) failed: No such file or directory [ 35.325892] udevd[2466]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 35.441545] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 35.649982] loop: module loaded [ 35.685124] loop0: detected capacity change from 0 to 2048000 [ 35.841694] I/O error, dev loop0, sector 20352 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 35.846680] I/O error, dev loop0, sector 20352 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [ 35.850097] Buffer I/O error on dev loop0p1, logical block 2288, async page read [ 36.612748] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 36.622419] scsi host0: scsi_debug: version 0191 [20210520] [ 36.622419] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 36.626110] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 36.628645] sd 0:0:0:0: Power-on or device reset occurred [ 36.638393] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 36.644364] sd 0:0:0:0: [sda] Write Protect is off [ 36.653805] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 36.668259] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 36.691485] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 36.730237] sd 0:0:0:0: [sda] Attached SCSI disk [ 37.909972] sda: [ 40.397530] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 42.108873] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 42.593462] scsi host0: scsi_debug: version 0191 [20210520] [ 42.593462] dev_size_mb=1, opts=0x0, submit_queues=1, statistics=0 [ 42.733795] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 42.736435] sd 0:0:0:0: Power-on or device reset occurred [ 42.789022] sd 0:0:0:0: [sda] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) [ 42.795238] sd 0:0:0:0: [sda] Write Protect is off [ 42.804650] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 42.818920] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 42.820447] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 42.861361] sd 0:0:0:0: [sda] Attached SCSI disk [ 43.356340] sda: [ 43.489089] sda: sda1 < > [ 43.709533] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 43.953265] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 43.955752] scsi host0: scsi_debug: version 0191 [20210520] [ 43.955752] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 43.977043] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 43.980298] sd 0:0:0:0: Power-on or device reset occurred [ 43.990351] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 44.013438] sd 0:0:0:0: [sda] Write Protect is off [ 44.023209] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 44.037809] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 44.039552] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 44.080346] sd 0:0:0:0: [sda] Attached SCSI disk [ 44.395960] sda: [ 44.805517] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 45.786983] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 45.792236] scsi host0: scsi_debug: version 0191 [20210520] [ 45.792236] dev_size_mb=267, opts=0x0, submit_queues=1, statistics=0 [ 45.795591] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 45.797859] sd 0:0:0:0: Power-on or device reset occurred [ 45.826245] sd 0:0:0:0: [sda] 546816 512-byte logical blocks: (280 MB/267 MiB) [ 45.832172] sd 0:0:0:0: [sda] Write Protect is off [ 45.841642] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 45.855864] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 45.857509] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 45.896045] sd 0:0:0:0: [sda] Attached SCSI disk [ 46.278493] sda: [ 46.537131] sda: sda1 [ 83.374528] sda: [ 83.649608] sda: sda1 [ 123.146738] sda: [ 123.517481] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 123.808305] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 123.811245] scsi host0: scsi_debug: version 0191 [20210520] [ 123.811245] dev_size_mb=5, opts=0x0, submit_queues=1, statistics=0 [ 123.842320] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 123.844783] sd 0:0:0:0: Power-on or device reset occurred [ 123.854353] sd 0:0:0:0: [sda] 10240 512-byte logical blocks: (5.24 MB/5.00 MiB) [ 123.918397] sd 0:0:0:0: [sda] Write Protect is off [ 123.927851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 123.983388] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 123.985602] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 124.025559] sd 0:0:0:0: [sda] Attached SCSI disk [ 124.328445] sda: [ 126.165132] EXT4-fs (sda1): mounted filesystem without journal. Quota mode: disabled. [ 126.431889] EXT4-fs (sda1): unmounting filesystem. [ 126.729850] sda: [ 127.077631] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 127.434784] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 127.457592] scsi host0: scsi_debug: version 0191 [20210520] [ 127.457592] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 127.462492] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 127.466361] sd 0:0:0:0: Power-on or device reset occurred [ 127.482499] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 127.501925] sd 0:0:0:0: [sda] Write Protect is off [ 127.519427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 127.560427] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 127.562407] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 127.602055] sd 0:0:0:0: [sda] Attached SCSI disk [ 129.385546] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 130.283750] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 130.287415] scsi host0: scsi_debug: version 0191 [20210520] [ 130.287415] dev_size_mb=25, opts=0x0, submit_queues=1, statistics=0 [ 130.291475] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 130.295059] sd 0:0:0:0: Power-on or device reset occurred [ 130.305460] sd 0:0:0:0: [sda] 51200 512-byte logical blocks: (26.2 MB/25.0 MiB) [ 130.328265] sd 0:0:0:0: [sda] Write Protect is off [ 130.362553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 130.377726] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 130.379562] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 130.443867] sd 0:0:0:0: [sda] Attached SCSI disk [ 130.906483] sda: sda1 [ 132.107491] udevd[4474]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 134.421619] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 143.953521] loop0: detected capacity change from 0 to 2048000 [ 144.448101] loop0: detected capacity change from 0 to 2048000 [ 144.962612] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 144.964989] scsi host0: scsi_debug: version 0191 [20210520] [ 144.964989] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 [ 144.982601] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 144.989756] sd 0:0:0:0: Power-on or device reset occurred [ 145.133460] sd 0:0:0:0: [sda] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB) [ 145.139413] sd 0:0:0:0: [sda] Write Protect is off [ 145.148829] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 145.162901] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 145.164528] sd 0:0:0:0: [sda] Optimal transfer size 262144 bytes [ 145.203271] sd 0:0:0:0: [sda] Attached SCSI disk [ 145.550624] sda: [ 145.877501] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 146.100127] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 146.103582] scsi host0: scsi_debug: version 0191 [20210520] [ 146.103582] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 [ 146.122739] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 146.125552] sd 0:0:0:0: Power-on or device reset occurred [ 146.134973] sd 0:0:0:0: [sda] physical block alignment offset: 3584 [ 146.136586] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB) [ 146.138288] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 146.143558] sd 0:0:0:0: [sda] Write Protect is off [ 146.152904] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 146.167126] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 146.168759] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 146.207034] sda: sda1 sda2 sda3 sda4 [ 146.208599] sd 0:0:0:0: [sda] Attached SCSI disk [ 146.595381] sda: sda1 sda2 sda3 sda4 [ 146.881485] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 148.954103] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 148.987072] scsi host0: scsi_debug: version 0191 [20210520] [ 148.987072] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 [ 148.990630] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 148.992840] sd 0:0:0:0: Power-on or device reset occurred [ 149.002417] sd 0:0:0:0: [sda] physical block alignment offset: 3584 [ 149.003936] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB) [ 149.005616] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 149.010837] sd 0:0:0:0: [sda] Write Protect is off [ 149.020111] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 149.078258] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 149.079794] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 149.118151] sd 0:0:0:0: [sda] Attached SCSI disk [ 149.593759] sda: [ 150.090673] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 150.093796] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 150.096590] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 150.099284] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 150.683557] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 150.686710] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 150.869675] sda: sda1 [ 151.297313] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 151.430931] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 151.962222] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 151.974630] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 152.723606] sda: sda1 [ 153.781314] sda: sda1 [ 154.984689] sda: sda1 [ 155.369301] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 155.372244] udevd[6459]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 155.437478] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 155.621927] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 155.991016] scsi host0: scsi_debug: version 0191 [20210520] [ 155.991016] dev_size_mb=1, opts=0x0, submit_queues=1, statistics=0 [ 156.139554] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 156.141929] sd 0:0:0:0: Power-on or device reset occurred [ 156.325279] sd 0:0:0:0: [sda] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) [ 156.331081] sd 0:0:0:0: [sda] Write Protect is off [ 156.340161] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 156.354020] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 156.355295] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 156.402047] sd 0:0:0:0: [sda] Attached SCSI disk [ 168.956913] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36 sda37 sda38 sda39 sda40 sda41 sda42 sda43 sda44 sda45 sda46 sda47 sda48 sda49 sda50 sda51 sda52 sda53 sda54 sda55 sda56 sda57 sda58 sda59 sda60 sda61 sda62 sda63 sda64 sda65 sda66 sda67 sda68 sda69 sda70 sda71 sda72 sda73 sda74 sda75 sda76 sda77 sda78 sda79 sda80 sda81 sda82 sda83 sda84 sda85 sda86 sda87 sda88 sda89 sda90 sda91 sda92 sda93 sda94 sda95 sda96 sda97 sda98 sda99 sda100 sda101 sda102 sda103 sda104 sda105 sda106 sda107 sda108 sda109 sda110 sda111 sda112 sda113 sda114 sda115 sda116 sda117 sda118 sda119 sda120 sda121 sda122 sda123 sda124 sda125 sda126 sda127 sda128 [ 169.281462] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 169.594144] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 169.599458] scsi host0: scsi_debug: version 0191 [20210520] [ 169.599458] dev_size_mb=6, opts=0x0, submit_queues=1, statistics=0 [ 169.602646] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 169.604766] sd 0:0:0:0: Power-on or device reset occurred [ 169.633595] sd 0:0:0:0: [sda] 12288 512-byte logical blocks: (6.29 MB/6.00 MiB) [ 169.671627] sd 0:0:0:0: [sda] Write Protect is off [ 169.681109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 169.695240] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 169.696834] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 169.735677] sd 0:0:0:0: [sda] Attached SCSI disk [ 170.149731] sda: [ 175.341101] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 [ 176.744325] EXT4-fs (sda14): mounting ext2 file system using the ext4 subsystem [ 176.759151] EXT4-fs (sda14): mounted filesystem without journal. Quota mode: disabled. [ 177.262920] EXT4-fs (sda15): mounting ext2 file system using the ext4 subsystem [ 177.277648] EXT4-fs (sda15): mounted filesystem without journal. Quota mode: disabled. [ 177.738665] EXT4-fs (sda16): mounting ext2 file system using the ext4 subsystem [ 177.753295] EXT4-fs (sda16): mounted filesystem without journal. Quota mode: disabled. [ 178.203903] EXT4-fs (sda14): unmounting filesystem. [ 178.260411] EXT4-fs (sda15): unmounting filesystem. [ 178.320314] EXT4-fs (sda16): unmounting filesystem. [ 178.429834] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 178.722708] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 178.757252] scsi host0: scsi_debug: version 0191 [20210520] [ 178.757252] dev_size_mb=9, opts=0x0, submit_queues=1, statistics=0 [ 178.794459] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 178.796799] sd 0:0:0:0: Power-on or device reset occurred [ 178.858717] sd 0:0:0:0: [sda] 18432 512-byte logical blocks: (9.44 MB/9.00 MiB) [ 178.864672] sd 0:0:0:0: [sda] Write Protect is off [ 178.874165] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 178.888354] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 178.890089] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 178.928548] sd 0:0:0:0: [sda] Attached SCSI disk [ 221.944217] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36 sda37 sda38 sda39 sda40 sda41 sda42 sda43 sda44 sda45 sda46 sda47 sda48 sda49 sda50 sda51 sda52 sda53 sda54 sda55 sda56 sda57 sda58 sda59 sda60 sda61 sda62 sda63 sda64 > [ 224.458329] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36 sda37 sda38 sda39 sda40 sda41 sda42 sda43 sda44 sda45 sda46 sda47 sda48 sda49 sda50 sda51 sda52 sda53 sda54 sda55 sda56 sda57 sda58 sda59 sda60 sda61 sda62 sda63 sda64 > [ 225.081487] sd 0:0:0:0: [sda] Synchronizing SCSI cache