[    0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.33 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467643641 ns
[    0.000247] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12884993020ns
[    0.014997] Console: colour dummy device 80x25
[    0.015860] printk: console [tty0] enabled
[    0.018407] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 6.1.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT Sat Mar 18 02:52:59 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239484K/262140K available (13584K kernel code, 1441K rwdata, 3220K rodata, 368K init, 403K bss, 22656K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.33 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467643641 ns
[    0.000247] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12884993020ns
[    0.014997] Console: colour dummy device 80x25
[    0.015860] printk: console [tty0] enabled
[    0.018407] printk: bootconsole [uart8250] disabled
[    0.020874] Calibrating delay loop... 852.78 BogoMIPS (lpj=4263936)
[    0.052920] pid_max: default: 32768 minimum: 301
[    0.054180] LSM: Security Framework initializing
[    0.055461] landlock: Up and running.
[    0.059851] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.060028] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.114569] cblist_init_generic: Setting adjustable number of callback queues.
[    0.114878] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.115380] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.116329] Performance counters: No available PMU.
[    0.117552] rcu: Hierarchical SRCU implementation.
[    0.117639] rcu: 	Max phase no-delay instances is 1000.
[    0.126043] smp: Bringing up secondary CPUs ...
[    0.126230] smp: Brought up 1 node, 1 CPU
[    0.143664] devtmpfs: initialized
[    0.153260] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.153576] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.163950] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.600034] raid6: int32x8  gen()   196 MB/s
[    0.958061] raid6: int32x4  gen()   576 MB/s
[    1.301448] raid6: int32x2  gen()   634 MB/s
[    1.489933] raid6: int32x1  gen()   377 MB/s
[    1.490095] raid6: using algorithm int32x2 gen() 634 MB/s
[    1.669090] raid6: .... xor() 379 MB/s, rmw enabled
[    1.669290] raid6: using intx1 recovery algorithm
[    1.672872] SCSI subsystem initialized
[    1.673667] usbcore: registered new interface driver usbfs
[    1.674028] usbcore: registered new interface driver hub
[    1.674299] usbcore: registered new device driver usb
[    1.674777] pps_core: LinuxPPS API ver. 1 registered
[    1.674845] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.675022] PTP clock support registered
[    1.692119] PCI host bridge to bus 0000:00
[    1.692500] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    1.693129] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    1.693314] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    1.694906] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    1.695687] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    1.695794] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    1.695882] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    1.695964] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    1.696058] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    1.698552] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    1.699274] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    1.699661] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    1.699813] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.699901] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.700003] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.700084] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.700557] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    1.700682] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    1.701347] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    1.701902] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    1.702056] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    1.702655] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    1.702751] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    1.702898] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    1.702992] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    1.703512] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    1.703624] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    1.703792] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.703940] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    1.704346] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    1.704450] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    1.704552] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.704981] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    1.705086] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    1.705197] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    1.705937] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    1.707438] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    1.707794] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    1.707930] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    1.708050] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    1.708233] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    1.708339] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    1.708485] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    1.708597] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    1.708706] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    1.708772] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    1.708858] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    1.708946] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    1.711007] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    1.711154] pci 0000:00:12.0: vgaarb: bridge control possible
[    1.711265] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    1.711391] vgaarb: loaded
[    1.713676] clocksource: Switched to clocksource MIPS
[    1.889465] NET: Registered PF_INET protocol family
[    1.891096] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    1.902679] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    1.902860] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.903010] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    1.903354] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    1.903568] TCP: Hash tables configured (established 2048 bind 2048)
[    1.904845] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.905138] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    1.906902] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.910288] RPC: Registered named UNIX socket transport module.
[    1.910403] RPC: Registered udp transport module.
[    1.910461] RPC: Registered tcp transport module.
[    1.910515] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.911682] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    1.912660] PCI: CLS 0 bytes, default 16
[    1.921620] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    1.940810] NFS: Registering the id_resolver key type
[    1.942134] Key type id_resolver registered
[    1.942230] Key type id_legacy registered
[    1.945213] Key type cifs.idmap registered
[    2.083593] xor: measuring software checksum speed
[    2.095568]    8regs           :   860 MB/sec
[    2.107818]    8regs_prefetch  :   821 MB/sec
[    2.119515]    32regs          :   860 MB/sec
[    2.131804]    32regs_prefetch :   821 MB/sec
[    2.131906] xor: using function: 32regs (860 MB/sec)
[    2.132595] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    2.132826] io scheduler mq-deadline registered
[    2.132969] io scheduler kyber registered
[    2.140001] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    2.147418] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    2.148838] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    2.151449] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    2.157896] printk: console [ttyS0] disabled
[    2.206692] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    2.206868] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    2.234845] printk: console [ttyS0] enabled
[    2.254152] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    2.254455] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    2.254940] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    2.262404] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console
[    2.264834] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    2.265858] [drm] Found bochs VGA, ID 0xb0c5.
[    2.266102] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    2.269945] [drm] Found EDID data blob.
[    2.276987] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    2.605013] Console: switching to colour frame buffer device 160x50
[    2.630647] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    2.729550] brd: module loaded
[    2.730915] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    2.739045] virtio_blk virtio2: [vda] 40260 512-byte logical blocks (20.6 MB/19.7 MiB)
[    2.816283] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    2.818202] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    2.819584] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    2.834816] hub 1-0:1.0: USB hub found
[    2.835946] hub 1-0:1.0: 2 ports detected
[    2.893231] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.894695] serio: i8042 AUX port at 0x60,0x64 irq 12
[    2.899809] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    2.904079] usbcore: registered new interface driver usbhid
[    2.904600] usbhid: USB HID core driver
[    2.905628] u32 classifier
[    2.905969]     input device check on
[    2.906358]     Actions configured
[    2.908801] NET: Registered PF_INET6 protocol family
[    2.917791] Segment Routing with IPv6
[    2.918468] In-situ OAM (IOAM) with IPv6
[    2.919696] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.927499] NET: Registered PF_PACKET protocol family
[    2.928723] Bridge firewalling registered
[    2.930184] Key type dns_resolver registered
[    2.931284] NET: Registered PF_VSOCK protocol family
[    2.944836] registered taskstats version 1
[    2.972482] Key type .fscrypt registered
[    2.982075] Key type fscrypt-provisioning registered
[    3.005806] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    3.013578] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    3.094894] Key type encrypted registered
[    3.125333] printk: console [netcon0] enabled
[    3.133342] netconsole: network logging started
[    3.149036] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    3.420302] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3
[    3.435975] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    3.657575] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
[    3.814274] IP-Config: Complete:
[    3.836087] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    3.855019]      device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5
[    3.866631]      host=192.168.7.6, domain=, nis-domain=(none)
[    3.883291]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    3.883408]      nameserver0=8.8.8.8
[    3.944599] md: Waiting for all devices to be available before autodetect
[    3.969525] md: If you don't use raid, use raid=noautodetect
[    3.991288] md: Autodetecting RAID arrays.
[    4.003343] md: autorun ...
[    4.046062] md: ... autorun DONE.
[    4.161244] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    4.183528] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    4.204529] devtmpfs: mounted
[    4.292315] Freeing unused kernel image (initmem) memory: 368K
[    4.305176] This architecture does not have kernel memory protection.
[    4.314247] Run /sbin/init as init process
[    4.397569] process '/sbin/init.sysvinit' started with executable stack
[    7.820192] udevd[112]: starting version 3.2.11
[    8.010913] udevd[113]: starting eudev-3.2.11
[   10.256152] EXT4-fs (vda): re-mounted. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.2 qemumips /dev/ttyS0

qemumips login: 