[    0.000000] Linux version 6.1.25-rt7-yocto-preempt-rt (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.40.20230119) #1 SMP PREEMPT_RT Fri Apr 21 14:44:57 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] random: crng init done
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000000a8ba3f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000a8ba40-0x0000000000a8ba4f] usable
[    0.000000] reserve setup_data: [mem 0x0000000000a8ba50-0x000000000ffd7fff] usable
[    0.000000] reserve setup_data: [mem 0x000000000ffd8000-0x000000000fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000003] kvm-clock: using sched offset of 623859818 cycles
[    0.000009] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000014] tsc: Detected 2599.996 MHz processor
[    0.001244] last_pfn = 0xffd8 max_arch_pfn = 0x400000000
[    0.001284] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.011786] found SMP MP-table at [mem 0x000f5bc0-0x000f5bcf]
[    0.012048] ACPI: Early table checksum verification disabled
[    0.012066] ACPI: RSDP 0x00000000000F59F0 000014 (v00 BOCHS )
[    0.012076] ACPI: RSDT 0x000000000FFE240C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012090] ACPI: FACP 0x000000000FFE21EC 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012099] ACPI: DSDT 0x000000000FFE0040 0021AC (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012103] ACPI: FACS 0x000000000FFE0000 000040
[    0.012107] ACPI: APIC 0x000000000FFE22E0 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012111] ACPI: HPET 0x000000000FFE2370 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012114] ACPI: MCFG 0x000000000FFE23A8 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012118] ACPI: WAET 0x000000000FFE23E4 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.012121] ACPI: Reserving FACP table memory at [mem 0xffe21ec-0xffe22df]
[    0.012122] ACPI: Reserving DSDT table memory at [mem 0xffe0040-0xffe21eb]
[    0.012123] ACPI: Reserving FACS table memory at [mem 0xffe0000-0xffe003f]
[    0.012124] ACPI: Reserving APIC table memory at [mem 0xffe22e0-0xffe236f]
[    0.012125] ACPI: Reserving HPET table memory at [mem 0xffe2370-0xffe23a7]
[    0.012125] ACPI: Reserving MCFG table memory at [mem 0xffe23a8-0xffe23e3]
[    0.012126] ACPI: Reserving WAET table memory at [mem 0xffe23e4-0xffe240b]
[    0.012199] Zone ranges:
[    0.012199]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.012202]   DMA32    [mem 0x0000000001000000-0x000000000ffd7fff]
[    0.012203]   Normal   empty
[    0.012204] Movable zone start for each node
[    0.012204] Early memory node ranges
[    0.012205]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.012208]   node   0: [mem 0x0000000000100000-0x000000000ffd7fff]
[    0.012209] Initmem setup node 0 [mem 0x0000000000001000-0x000000000ffd7fff]
[    0.012710] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012730] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.013513] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.018616] ACPI: PM-Timer IO Port: 0x608
[    0.018634] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.018683] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.018687] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.018691] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.018692] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.018695] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.018696] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.018702] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.018704] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.018708] TSC deadline timer available
[    0.018709] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.018750] [mem 0x10000000-0xafffffff] available for PCI devices
[    0.018752] Booting paravirtualized kernel on KVM
[    0.018760] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.018767] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.019437] percpu: Embedded 53 pages/cpu s177664 r8192 d31232 u524288
[    0.019479] Built 1 zonelists, mobility grouping on.  Total pages: 64215
[    0.019481] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.019597] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.019625] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.019726] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.020754] Memory: 224532K/261592K available (16394K kernel code, 2171K rwdata, 4180K rodata, 1892K init, 1924K bss, 36800K reserved, 0K cma-reserved)
[    0.020830] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.020845] Kernel/User page tables isolation: enabled
[    0.020864] ftrace: allocating 44717 entries in 175 pages
[    0.032406] ftrace: allocated 175 pages with 6 groups
[    0.032995] rcu: Preemptible hierarchical RCU implementation.
[    0.032996] rcu: 	RCU event tracing is enabled.
[    0.032996] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.032997] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.032998] rcu: 	RCU_SOFTIRQ processing moved to rcuc kthreads.
[    0.032999] 	No expedited grace period (rcu_normal_after_boot).
[    0.032999] 	Trampoline variant of Tasks RCU enabled.
[    0.033000] 	Rude variant of Tasks RCU enabled.
[    0.033001] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.033001] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.038557] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.038732] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.045498] Console: colour VGA+ 80x25
[    0.227908] printk: console [ttyS0] enabled
[    0.227917] ACPI: Core revision 20220331
[    0.228071] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.228191] APIC: Switch to symmetric I/O mode setup
[    0.228470] x2apic enabled
[    0.228764] Switched APIC routing to physical x2apic.
[    0.230005] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.230036] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.230040] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.230043] pid_max: default: 32768 minimum: 301
[    0.230067] LSM: Security Framework initializing
[    0.230092] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.230095] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.231510] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.231518] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.231524] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.231530] Spectre V2 : Mitigation: Retpolines
[    0.231530] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.231531] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.231532] Speculative Store Bypass: Vulnerable
[    0.231536] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.231537] MMIO Stale Data: Unknown: No mitigations
[    0.231539] SRBDS: Unknown: Dependent on hypervisor status
[    0.243200] Freeing SMP alternatives memory: 44K
[    0.243379] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.279608] cblist_init_generic: Setting adjustable number of callback queues.
[    0.279610] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.282816] cblist_init_generic: Setting shift to 2 and lim to 1.
[    0.284312] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.286479] rcu: Hierarchical SRCU implementation.
[    0.286480] rcu: 	Max phase no-delay instances is 400.
[    0.286495] printk: console [ttyS0] printing thread started
[    0.290542] smp: Bringing up secondary CPUs ...
[    0.290689] x86: Booting SMP configuration:
[    0.290690] .... node  #0, CPUs:      #1 #2 #3
[    0.295085] smp: Brought up 1 node, 4 CPUs
[    0.295085] smpboot: Max logical packages: 1
[    0.295085] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.295487] devtmpfs: initialized
[    0.298062] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.298068] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.298619] pinctrl core: initialized pinctrl subsystem
[    0.298837] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.300050] thermal_sys: Registered thermal governor 'step_wise'
[    0.300053] thermal_sys: Registered thermal governor 'user_space'
[    0.301908] cpuidle: using governor menu
[    0.302274] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.302278] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.302293] PCI: Using configuration type 1 for base access
[    0.309348] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.328880] raid6: sse2x4   gen()  5797 MB/s
[    0.345823] raid6: sse2x2   gen()  5982 MB/s
[    0.362798] raid6: sse2x1   gen()  5134 MB/s
[    0.362801] raid6: using algorithm sse2x2 gen() 5982 MB/s
[    0.379574] raid6: .... xor() 5420 MB/s, rmw enabled
[    0.379576] raid6: using ssse3x2 recovery algorithm
[    0.381970] ACPI: Added _OSI(Module Device)
[    0.381972] ACPI: Added _OSI(Processor Device)
[    0.381973] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.381974] ACPI: Added _OSI(Processor Aggregator Device)
[    0.384168] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.387231] ACPI: Interpreter enabled
[    0.387247] ACPI: PM: (supports S0 S3 S5)
[    0.387248] ACPI: Using IOAPIC for interrupt routing
[    0.387278] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.387279] PCI: Using E820 reservations for host bridge windows
[    0.388066] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.391236] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.391242] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.391309] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.391409] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.391485] PCI host bridge to bus 0000:00
[    0.391486] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.391489] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.391490] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.391492] pci_bus 0000:00: root bus resource [mem 0x10000000-0xafffffff window]
[    0.391493] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.391495] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.391497] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.391585] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.392732] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.394045] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.396044] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.402045] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.404045] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.406455] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.407673] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.408605] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.411797] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.416187] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.417866] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.419735] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.420833] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.423672] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.423860] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.425308] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.426808] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.427738] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.431045] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.437607] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.439930] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.441142] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.443321] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.444572] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.446738] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.447906] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.448446] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.451408] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.453377] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.453920] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.457388] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.458045] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.460835] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.463295] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.465176] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.465368] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.465530] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.465694] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.465835] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.465984] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.466144] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.466317] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.466385] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.466399] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.466412] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.466425] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.466437] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.466450] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.466462] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.466474] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.467209] iommu: Default domain type: Translated 
[    0.467211] iommu: DMA domain TLB invalidation policy: lazy mode 
[    0.467376] SCSI subsystem initialized
[    0.467401] ACPI: bus type USB registered
[    0.467401] usbcore: registered new interface driver usbfs
[    0.467401] usbcore: registered new interface driver hub
[    0.467401] usbcore: registered new device driver usb
[    0.467401] pps_core: LinuxPPS API ver. 1 registered
[    0.467401] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.467401] PTP clock support registered
[    0.468425] Bluetooth: Core ver 2.22
[    0.468437] NET: Registered PF_BLUETOOTH protocol family
[    0.468438] Bluetooth: HCI device and connection manager initialized
[    0.468443] Bluetooth: HCI socket layer initialized
[    0.468446] Bluetooth: L2CAP socket layer initialized
[    0.468453] Bluetooth: SCO socket layer initialized
[    0.468503] PCI: Using ACPI for IRQ routing
[    0.630596] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.630596] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.630596] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.630596] vgaarb: loaded
[    0.630596] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.630596] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.634184] clocksource: Switched to clocksource kvm-clock
[    0.634408] pnp: PnP ACPI init
[    0.634734] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.635158] pnp: PnP ACPI: found 6 devices
[    0.644715] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.644768] NET: Registered PF_INET protocol family
[    0.644826] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.645260] tcp_listen_portaddr_hash hash table entries: 128 (order: 0, 5120 bytes, linear)
[    0.645267] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.645272] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.645284] TCP bind hash table entries: 2048 (order: 5, 163840 bytes, linear)
[    0.645867] TCP: Hash tables configured (established 2048 bind 2048)
[    0.645907] UDP hash table entries: 256 (order: 2, 24576 bytes, linear)
[    0.645920] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes, linear)
[    0.645996] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.646331] RPC: Registered named UNIX socket transport module.
[    0.646333] RPC: Registered udp transport module.
[    0.646334] RPC: Registered tcp transport module.
[    0.646335] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.646350] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.646354] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.646356] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.646358] pci_bus 0000:00: resource 7 [mem 0x10000000-0xafffffff window]
[    0.646360] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.646361] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.647081] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.648783] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.650426] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.652068] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.653468] PCI: CLS 0 bytes, default 64
[    0.654161] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.654174] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.667210] Initialise system trusted keyrings
[    0.667451] workingset: timestamp_bits=46 max_order=16 bucket_order=0
[    0.671442] NFS: Registering the id_resolver key type
[    0.671454] Key type id_resolver registered
[    0.671456] Key type id_legacy registered
[    0.685942] xor: automatically using best checksumming function   avx       
[    0.685945] Key type asymmetric registered
[    0.685950] Asymmetric key parser 'x509' registered
[    0.685967] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.685973] io scheduler mq-deadline registered
[    0.685974] io scheduler kyber registered
[    0.686897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.690143] ACPI: button: Power Button [PWRF]
[    0.691249] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.694397] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.721941] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.725432] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.728613] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.729029] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.729592] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.731360] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.736159] Linux agpgart interface v0.103
[    0.736357] ACPI: bus type drm_connector registered
[    0.736664] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.736671] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.753903] Console: switching to colour dummy device 80x25
[    0.754320] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.754323] [drm] features: -context_init
[    0.757357] [drm] number of scanouts: 1
[    0.757391] [drm] number of cap sets: 0
[    0.758364] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.765364] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.765597] virtio-pci 0000:00:03.0: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.807881] Console: switching to colour frame buffer device 160x50
[    0.814067] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.839155] brd: module loaded
[    0.843290] loop: module loaded
[    0.843733] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.850119] virtio_blk virtio3: [vda] 276422 512-byte logical blocks (142 MB/135 MiB)
[    0.857282] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.857291] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.861568] scsi host0: ahci
[    0.862265] scsi host1: ahci
[    0.862709] scsi host2: ahci
[    0.863149] scsi host3: ahci
[    0.863530] scsi host4: ahci
[    0.863949] scsi host5: ahci
[    0.864157] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.864178] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.864193] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.864227] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.864279] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.864296] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.870661] e100: Intel(R) PRO/100 Network Driver
[    0.870664] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.870694] e1000: Intel(R) PRO/1000 Network Driver
[    0.870695] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.870726] e1000e: Intel(R) PRO/1000 Network Driver
[    0.870727] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.870757] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.870759] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.872995] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.873019] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.874088] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.881224] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.881750] hub 1-0:1.0: USB hub found
[    0.881769] hub 1-0:1.0: 6 ports detected
[    0.884676] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.884692] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.885416] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.885989] hub 2-0:1.0: USB hub found
[    0.886003] hub 2-0:1.0: 2 ports detected
[    0.888673] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.888688] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.889301] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.889930] hub 3-0:1.0: USB hub found
[    0.889943] hub 3-0:1.0: 2 ports detected
[    0.893003] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.893018] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.894269] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.894863] hub 4-0:1.0: USB hub found
[    0.894877] hub 4-0:1.0: 2 ports detected
[    0.895377] usbcore: registered new interface driver usb-storage
[    0.895426] usbcore: registered new interface driver usbserial_generic
[    0.895444] usbserial: USB Serial support registered for generic
[    0.895464] usbcore: registered new interface driver ftdi_sio
[    0.895474] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.895515] usbcore: registered new interface driver pl2303
[    0.895524] usbserial: USB Serial support registered for pl2303
[    0.895585] i8042: PNP: No PS/2 controller found.
[    0.895727] mousedev: PS/2 mouse device common for all mice
[    0.896057] rtc_cmos 00:04: RTC can wake from S4
[    0.898621] rtc_cmos 00:04: registered as rtc0
[    0.898940] rtc_cmos 00:04: setting system clock to 2023-04-26T12:07:47 UTC (1682510867)
[    0.899288] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.899721] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    0.899858] intel_pstate: CPU model not supported
[    0.899895] sdhci: Secure Digital Host Controller Interface driver
[    0.899897] sdhci: Copyright(c) Pierre Ossman
[    0.899938] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.900064] usbcore: registered new interface driver usbhid
[    0.900066] usbhid: USB HID core driver
[    0.900106] u32 classifier
[    0.900107]     input device check on
[    0.900108]     Actions configured
[    0.900529] NET: Registered PF_INET6 protocol family
[    0.900953] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.901169] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.901173] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.901363] Segment Routing with IPv6
[    0.901381] In-situ OAM (IOAM) with IPv6
[    0.901433] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.901742] NET: Registered PF_PACKET protocol family
[    0.901784] Key type dns_resolver registered
[    0.901969] NET: Registered PF_VSOCK protocol family
[    0.903581] IPI shorthand broadcast: enabled
[    0.903632] sched_clock: Marking stable (712767817, 190300058)->(958248125, -55180250)
[    0.904000] registered taskstats version 1
[    0.904005] Loading compiled-in X.509 certificates
[    0.904211] Key type .fscrypt registered
[    0.904214] Key type fscrypt-provisioning registered
[    0.905075] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.906181] Key type encrypted registered
[    0.910261] printk: console [netcon0] enabled
[    0.910264] netconsole: network logging started
[    0.910272] printk: console [netcon0] printing thread started
[    1.118120] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.173347] ata1: SATA link down (SStatus 0 SControl 300)
[    1.173677] ata2: SATA link down (SStatus 0 SControl 300)
[    1.181185] ata5: SATA link down (SStatus 0 SControl 300)
[    1.181476] ata6: SATA link down (SStatus 0 SControl 300)
[    1.181891] ata4: SATA link down (SStatus 0 SControl 300)
[    1.182567] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.183005] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.183013] ata3.00: applying bridge limits
[    1.183553] ata3.00: configured for UDMA/100
[    1.184670] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.224821] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.224840] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.260187] IP-Config: Complete:
[    1.260190]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.260196]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.260198]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.260201]      nameserver0=8.8.8.8
[    1.274428] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.274741] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.290506] md: Waiting for all devices to be available before autodetect
[    1.290510] md: If you don't use raid, use raid=noautodetect
[    1.290521] md: Autodetecting RAID arrays.
[    1.290523] md: autorun ...
[    1.290524] md: ... autorun DONE.
[    1.299371] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    1.299412] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.299884] devtmpfs: mounted
[    1.302442] Freeing unused kernel image (initmem) memory: 1892K
[    1.305189] Write protecting the kernel read-only data: 24576k
[    1.308292] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.309446] Freeing unused kernel image (rodata/data gap) memory: 1964K
[    1.309640] Run /sbin/init as init process
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
[    1.389073] usb 1-2: new high-speed USB device number 3 using ehci-pci
Starting udev
[    1.505654] udevd[200]: starting version 3.2.11
[    1.519595] udevd[201]: starting eudev-3.2.11
[    1.539141] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.592512] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.818057] EXT4-fs (vda): re-mounted. Quota mode: disabled.
[    1.924186] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
INIT: Entering runlevel: 5
Configuring network interfaces... RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting rpcbind daemon...done.
starting statd: done
Starting atd: OK
starting 8 nfsd kernel threads: [    5.204707] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
done[    5.205037] NFSD: Using legacy client tracking operations.
[    5.205107] NFSD: starting 90-second grace period (net f0000000)

starting mountd: done
Starting system log daemon...0
Starting crond: OK

Poky (Yocto Project Reference Distro) 4.2 qemux86-64 ttyS0

qemux86-64 login: 