[    0.000000] Linux version 6.5.5-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20230926) #1 SMP PREEMPT_DYNAMIC Fri Sep 29 00:16:28 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000002] kvm-clock: using sched offset of 1067705498 cycles
[    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000010] tsc: Detected 2299.988 MHz processor
[    0.002142] last_pfn = 0x3ffd8 max_arch_pfn = 0x400000000
[    0.002187] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.002192] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.013231] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.013462] ACPI: Early table checksum verification disabled
[    0.013469] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS )
[    0.013490] ACPI: RSDT 0x000000003FFE246C 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.013501] ACPI: FACP 0x000000003FFE224C 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.013512] ACPI: DSDT 0x000000003FFE0040 00220C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.013519] ACPI: FACS 0x000000003FFE0000 000040
[    0.013525] ACPI: APIC 0x000000003FFE2340 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.013532] ACPI: HPET 0x000000003FFE23D0 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.013539] ACPI: MCFG 0x000000003FFE2408 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.013546] ACPI: WAET 0x000000003FFE2444 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.013551] ACPI: Reserving FACP table memory at [mem 0x3ffe224c-0x3ffe233f]
[    0.013554] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe224b]
[    0.013556] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]
[    0.013558] ACPI: Reserving APIC table memory at [mem 0x3ffe2340-0x3ffe23cf]
[    0.013560] ACPI: Reserving HPET table memory at [mem 0x3ffe23d0-0x3ffe2407]
[    0.013561] ACPI: Reserving MCFG table memory at [mem 0x3ffe2408-0x3ffe2443]
[    0.013563] ACPI: Reserving WAET table memory at [mem 0x3ffe2444-0x3ffe246b]
[    0.026830] Zone ranges:
[    0.026836]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.026843]   DMA32    [mem 0x0000000001000000-0x000000003ffd7fff]
[    0.026846]   Normal   empty
[    0.026848] Movable zone start for each node
[    0.026850] Early memory node ranges
[    0.026851]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.026854]   node   0: [mem 0x0000000000100000-0x000000003ffd7fff]
[    0.026857] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]
[    0.026876] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.027055] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.033639] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.034451] ACPI: PM-Timer IO Port: 0x608
[    0.034470] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.034534] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.034540] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.034543] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.034546] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.034548] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.034550] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.034558] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.034560] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.034567] TSC deadline timer available
[    0.034569] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.034599] [mem 0x40000000-0xafffffff] available for PCI devices
[    0.034601] Booting paravirtualized kernel on KVM
[    0.034605] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.034612] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.035442] percpu: Embedded 56 pages/cpu s189928 r8192 d31256 u524288
[    0.035489] Kernel command line: root=/dev/vda rw  ip=192.168.7.8::192.168.7.7:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.035605] random: crng init done
[    0.035754] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.035833] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.035952] Built 1 zonelists, mobility grouping on.  Total pages: 257752
[    0.036723] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.040248] Memory: 993360K/1048024K available (18432K kernel code, 2306K rwdata, 5176K rodata, 3376K init, 2336K bss, 54404K reserved, 0K cma-reserved)
[    0.040341] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.040357] Kernel/User page tables isolation: enabled
[    0.040403] ftrace: allocating 50642 entries in 198 pages
[    0.054648] ftrace: allocated 198 pages with 4 groups
[    0.054745] Dynamic Preempt: full
[    0.055394] rcu: Preemptible hierarchical RCU implementation.
[    0.055397] rcu: 	RCU event tracing is enabled.
[    0.055398] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.055400] 	All grace periods are expedited (rcu_expedited).
[    0.055401] 	Trampoline variant of Tasks RCU enabled.
[    0.055402] 	Rude variant of Tasks RCU enabled.
[    0.055403] 	Tracing variant of Tasks RCU enabled.
[    0.055404] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.055406] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.061758] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.062046] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.062232] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.073171] Console: colour VGA+ 80x25
[    0.073246] printk: console [ttyS0] enabled
[    0.518730] ACPI: Core revision 20230331
[    0.519894] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.546305] APIC: Switch to symmetric I/O mode setup
[    0.554260] x2apic enabled
[    0.558338] Switched APIC routing to physical x2apic.
[    0.563929] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.568362] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212729dd067, max_idle_ns: 440795299996 ns
[    0.588116] Calibrating delay loop (skipped) preset value.. 4599.97 BogoMIPS (lpj=2299988)
[    0.589286] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.590119] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.591124] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.592128] Spectre V2 : Mitigation: Retpolines
[    0.593122] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.594125] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.595124] Speculative Store Bypass: Vulnerable
[    0.597122] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.598123] MMIO Stale Data: Unknown: No mitigations
[    0.599119] SRBDS: Unknown: Dependent on hypervisor status
[    0.600135] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.601129] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.602126] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.603125] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.604124] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.645707] Freeing SMP alternatives memory: 52K
[    0.646124] pid_max: default: 32768 minimum: 301
[    0.647168] LSM: initializing lsm=capability,landlock,integrity
[    0.648141] landlock: Up and running.
[    0.649188] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.650132] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.651632] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.652394] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.653164] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.654166] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.655167] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.656171] signal: max sigframe size: 1776
[    0.657208] rcu: Hierarchical SRCU implementation.
[    0.658121] rcu: 	Max phase no-delay instances is 400.
[    0.659455] smp: Bringing up secondary CPUs ...
[    0.660298] smpboot: x86: Booting SMP configuration:
[    0.661131] .... node  #0, CPUs:      #1 #2 #3
[    0.664173] smp: Brought up 1 node, 4 CPUs
[    0.667133] smpboot: Max logical packages: 1
[    0.668122] smpboot: Total of 4 processors activated (18399.90 BogoMIPS)
[    0.670179] devtmpfs: initialized
[    0.671467] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.672130] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.673196] pinctrl core: initialized pinctrl subsystem
[    0.675630] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.676472] thermal_sys: Registered thermal governor 'step_wise'
[    0.676475] thermal_sys: Registered thermal governor 'user_space'
[    0.677162] cpuidle: using governor menu
[    0.679477] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.680134] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.681146] PCI: Using configuration type 1 for base access
[    0.682504] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.741761] raid6: sse2x4   gen()  6821 MB/s
[    0.764198] raid6: sse2x2   gen()  6793 MB/s
[    0.788123] raid6: sse2x1   gen()  4420 MB/s
[    0.793124] raid6: using algorithm sse2x4 gen() 6821 MB/s
[    0.811292] raid6: .... xor() 3952 MB/s, rmw enabled
[    0.822127] raid6: using ssse3x2 recovery algorithm
[    0.827271] ACPI: Added _OSI(Module Device)
[    0.828123] ACPI: Added _OSI(Processor Device)
[    0.829126] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.830122] ACPI: Added _OSI(Processor Aggregator Device)
[    0.833776] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.851439] ACPI: Interpreter enabled
[    0.852167] ACPI: PM: (supports S0 S3 S5)
[    0.853133] ACPI: Using IOAPIC for interrupt routing
[    0.854761] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.855123] PCI: Using E820 reservations for host bridge windows
[    0.856333] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.861064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.861150] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.862268] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.863322] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.864295] PCI host bridge to bus 0000:00
[    0.865130] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.866136] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.867125] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.868124] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]
[    0.869125] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.870124] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.871134] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.872281] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.874149] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.877128] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.880125] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.888125] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.891125] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.893411] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.896052] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.898124] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.904126] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.908261] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.911156] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.916231] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.919148] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.924206] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.925381] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.927562] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.930125] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.933596] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.941128] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.945506] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.950125] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.952853] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.956777] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.960191] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.965126] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.968075] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.968960] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.973162] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.974946] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.975663] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.981753] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.983123] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.985807] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.990781] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.993397] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.994285] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.995283] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.996280] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.997275] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.998278] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.999336] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    1.000282] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    1.001189] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    1.002160] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    1.003141] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    1.004141] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    1.005143] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    1.006142] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    1.007168] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    1.008142] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    1.010020] iommu: Default domain type: Translated
[    1.010129] iommu: DMA domain TLB invalidation policy: lazy mode
[    1.011359] SCSI subsystem initialized
[    1.012317] ACPI: bus type USB registered
[    1.013170] usbcore: registered new interface driver usbfs
[    1.014150] usbcore: registered new interface driver hub
[    1.015141] usbcore: registered new device driver usb
[    1.016164] pps_core: LinuxPPS API ver. 1 registered
[    1.017121] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.018149] PTP clock support registered
[    1.021434] Bluetooth: Core ver 2.22
[    1.022143] NET: Registered PF_BLUETOOTH protocol family
[    1.023121] Bluetooth: HCI device and connection manager initialized
[    1.024133] Bluetooth: HCI socket layer initialized
[    1.025123] Bluetooth: L2CAP socket layer initialized
[    1.026140] Bluetooth: SCO socket layer initialized
[    1.027860] PCI: Using ACPI for IRQ routing
[    1.127392] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    1.128115] pci 0000:00:03.0: vgaarb: bridge control possible
[    1.128115] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    1.128131] vgaarb: loaded
[    1.129098] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.129121] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    1.134387] clocksource: Switched to clocksource kvm-clock
[    1.136285] pnp: PnP ACPI init
[    1.139239] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved
[    1.143460] pnp: PnP ACPI: found 6 devices
[    1.180432] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.205944] NET: Registered PF_INET protocol family
[    1.207406] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.209980] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    1.212172] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    1.214171] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    1.216129] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    1.218124] TCP: Hash tables configured (established 8192 bind 8192)
[    1.219891] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.221715] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    1.223733] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    1.241529] RPC: Registered named UNIX socket transport module.
[    1.246315] RPC: Registered udp transport module.
[    1.247617] RPC: Registered tcp transport module.
[    1.248924] RPC: Registered tcp-with-tls transport module.
[    1.250404] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.252199] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.254126] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.255679] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.257885] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]
[    1.259595] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    1.261340] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    1.263692] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    1.289896] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 26007 usecs
[    1.316865] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    1.319567] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    1.322117] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    1.325019] PCI: CLS 0 bytes, default 64
[    1.352329] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    1.372265] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212729dd067, max_idle_ns: 440795299996 ns
[    1.418592] Initialise system trusted keyrings
[    1.420109] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    1.436746] NFS: Registering the id_resolver key type
[    1.440326] Key type id_resolver registered
[    1.441423] Key type id_legacy registered
[    1.453274] Key type cifs.idmap registered
[    1.482868] xor: automatically using best checksumming function   avx       
[    1.493709] Key type asymmetric registered
[    1.500121] Asymmetric key parser 'x509' registered
[    1.510333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.512161] io scheduler mq-deadline registered
[    1.513271] io scheduler kyber registered
[    1.514278] io scheduler bfq registered
[    1.515978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.525245] ACPI: button: Power Button [PWRF]
[    1.529048] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    1.536653] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    1.544927] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    1.552074] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    1.555467] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.562578] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    1.581903] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    1.584634] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.595560] Linux agpgart interface v0.103
[    1.598342] ACPI: bus type drm_connector registered
[    1.599763] [drm] pci: virtio-vga detected at 0000:00:03.0
[    1.601177] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    1.608357] Console: switching to colour dummy device 80x25
[    1.617757] [drm] features: -virgl +edid -resource_blob -host_visible
[    1.617762] [drm] features: -context_init
[    1.623699] [drm] number of scanouts: 1
[    1.624675] [drm] number of cap sets: 0
[    1.633194] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    1.645858] fbcon: virtio_gpudrmfb (fb0) is primary device
[    1.682678] Console: switching to colour frame buffer device 160x50
[    1.706390] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    1.713175] brd: module loaded
[    1.788517] loop: module loaded
[    1.789779] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    1.793736] virtio_blk virtio3: [vda] 759176 512-byte logical blocks (389 MB/371 MiB)
[    1.804918] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    1.807426] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    1.818377] scsi host0: ahci
[    1.837525] scsi host1: ahci
[    1.865435] scsi host2: ahci
[    1.870884] scsi host3: ahci
[    1.872373] scsi host4: ahci
[    1.874225] scsi host5: ahci
[    1.875189] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    1.877204] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    1.878919] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    1.880840] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    1.890557] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    1.892401] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    1.901012] e100: Intel(R) PRO/100 Network Driver
[    1.902124] e100: Copyright(c) 1999-2006 Intel Corporation
[    1.903281] e1000: Intel(R) PRO/1000 Network Driver
[    1.904295] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    1.905506] e1000e: Intel(R) PRO/1000 Network Driver
[    1.906530] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.907756] igb: Intel(R) Gigabit Ethernet Network Driver
[    1.908884] igb: Copyright (c) 2007-2014 Intel Corporation.
[    1.921817] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.923374] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    1.925717] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    1.932499] hub 1-0:1.0: USB hub found
[    1.948198] hub 1-0:1.0: 2 ports detected
[    1.959440] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.960831] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.963403] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    1.968143] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.970014] hub 2-0:1.0: USB hub found
[    1.971303] hub 2-0:1.0: 6 ports detected
[    1.994240] hub 1-0:1.0: USB hub found
[    1.995373] hub 1-0:1.0: 2 ports detected
[    1.997329] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.999001] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.001397] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    2.003994] hub 3-0:1.0: USB hub found
[    2.007329] hub 3-0:1.0: 2 ports detected
[    2.026983] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.028918] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.032272] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    2.046580] hub 4-0:1.0: USB hub found
[    2.047625] hub 4-0:1.0: 2 ports detected
[    2.049005] usbcore: registered new interface driver usb-storage
[    2.050573] usbcore: registered new interface driver usbserial_generic
[    2.052402] usbserial: USB Serial support registered for generic
[    2.053962] usbcore: registered new interface driver ftdi_sio
[    2.055412] usbserial: USB Serial support registered for FTDI USB Serial Device
[    2.061681] usbcore: registered new interface driver pl2303
[    2.072377] usbserial: USB Serial support registered for pl2303
[    2.080719] i8042: PNP: No PS/2 controller found.
[    2.085160] mousedev: PS/2 mouse device common for all mice
[    2.097520] rtc_cmos 00:04: RTC can wake from S4
[    2.105410] rtc_cmos 00:04: registered as rtc0
[    2.106786] rtc_cmos 00:04: setting system clock to 2023-10-01T08:09:02 UTC (1696147742)
[    2.109142] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    2.111877] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.113783] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    2.115604] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    2.116804] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    2.120118] intel_pstate: CPU model not supported
[    2.121231] sdhci: Secure Digital Host Controller Interface driver
[    2.122525] sdhci: Copyright(c) Pierre Ossman
[    2.123457] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.125048] usbcore: registered new interface driver usbhid
[    2.126657] usbhid: USB HID core driver
[    2.127758] u32 classifier
[    2.128549]     input device check on
[    2.156411]     Actions configured
[    2.172192] NET: Registered PF_INET6 protocol family
[    2.196584] Segment Routing with IPv6
[    2.205834] In-situ OAM (IOAM) with IPv6
[    2.209094] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.210985] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    2.220545] NET: Registered PF_PACKET protocol family
[    2.224608] Bridge firewalling registered
[    2.225590] Key type dns_resolver registered
[    2.230121] NET: Registered PF_VSOCK protocol family
[    2.231024] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.262370] IPI shorthand broadcast: enabled
[    2.263016] ata1: SATA link down (SStatus 0 SControl 300)
[    2.273287] sched_clock: Marking stable (1753005836, 520055303)->(2928994582, -655933443)
[    2.294216] ata5: SATA link down (SStatus 0 SControl 300)
[    2.298948] registered taskstats version 1
[    2.318710] ata4: SATA link down (SStatus 0 SControl 300)
[    2.318939] ata6: SATA link down (SStatus 0 SControl 300)
[    2.319227] ata2: SATA link down (SStatus 0 SControl 300)
[    2.319420] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    2.319427] ata3.00: applying bridge limits
[    2.330547] ata3.00: configured for UDMA/100
[    2.359581] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    2.367138] Loading compiled-in X.509 certificates
[    2.417676] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    2.441768] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.453082] Key type .fscrypt registered
[    2.453087] Key type fscrypt-provisioning registered
[    2.453912] Btrfs loaded, zoned=no, fsverity=no
[    2.466736] sr 2:0:0:0: [sr0] Hmm, seems the drive doesn't support multisession CD's
[    2.474154] Key type encrypted registered
[    2.475997] printk: console [netcon0] enabled
[    2.477222] netconsole: network logging started
[    2.484271] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    2.497422] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    2.520097] IP-Config: Complete:
[    2.521021]      device=eth0, hwaddr=52:54:00:12:34:08, ipaddr=192.168.7.8, mask=255.255.255.0, gw=192.168.7.7
[    2.523495]      host=192.168.7.8, domain=, nis-domain=(none)
[    2.524985]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    2.524989]      nameserver0=8.8.8.8
[    2.527879] clk: Disabling unused clocks
[    2.545007] md: Waiting for all devices to be available before autodetect
[    2.546368] md: If you don't use raid, use raid=noautodetect
[    2.547509] md: Autodetecting RAID arrays.
[    2.548336] md: autorun ...
[    2.548901] md: ... autorun DONE.
[    2.563645] EXT4-fs (vda): mounted filesystem 38c5393b-bb8a-435e-94b4-6a4e4af58e01 r/w with ordered data mode. Quota mode: disabled.
[    2.578691] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    2.580727] devtmpfs: mounted
[    2.602560] Freeing unused kernel image (initmem) memory: 3376K
[    2.612545] Write protecting the kernel read-only data: 24576k
[    2.617106] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    2.619434] Freeing unused kernel image (rodata/data gap) memory: 968K
[    2.623311] Run /sbin/init as init process
INIT: version 3.04 booting
Starting udev
[    2.778758] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    2.819177] udevd[126]: starting version 3.2.12
[    2.837122] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    2.845733] udevd[127]: starting eudev-3.2.12
[    3.044382] EXT4-fs (vda): re-mounted 38c5393b-bb8a-435e-94b4-6a4e4af58e01 r/w. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.2+snapshot-da3a446526ea17177c4438384e8ea40c027581c6 qemux86-64 /dev/ttyS0

qemux86-64 login: 