[ 0.000000] Linux version 6.5.5-yocto-standard (oe-user@oe-host) (i686-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20230926) #1 SMP PREEMPT_DYNAMIC Fri Sep 29 00:16:28 UTC 2023 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000002ffd8000-0x000000002fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000002] kvm-clock: using sched offset of 591922499 cycles [ 0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000009] tsc: Detected 2599.996 MHz processor [ 0.000934] last_pfn = 0x2ffd8 max_arch_pfn = 0x100000 [ 0.000960] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000963] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004766] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f] [ 0.004805] ACPI: Early table checksum verification disabled [ 0.004807] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS ) [ 0.004815] ACPI: RSDT 0x000000002FFE246C 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004822] ACPI: FACP 0x000000002FFE224C 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004828] ACPI: DSDT 0x000000002FFE0040 00220C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004833] ACPI: FACS 0x000000002FFE0000 000040 [ 0.004837] ACPI: APIC 0x000000002FFE2340 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004841] ACPI: HPET 0x000000002FFE23D0 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004846] ACPI: MCFG 0x000000002FFE2408 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004850] ACPI: WAET 0x000000002FFE2444 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004853] ACPI: Reserving FACP table memory at [mem 0x2ffe224c-0x2ffe233f] [ 0.004855] ACPI: Reserving DSDT table memory at [mem 0x2ffe0040-0x2ffe224b] [ 0.004856] ACPI: Reserving FACS table memory at [mem 0x2ffe0000-0x2ffe003f] [ 0.004857] ACPI: Reserving APIC table memory at [mem 0x2ffe2340-0x2ffe23cf] [ 0.004858] ACPI: Reserving HPET table memory at [mem 0x2ffe23d0-0x2ffe2407] [ 0.004859] ACPI: Reserving MCFG table memory at [mem 0x2ffe2408-0x2ffe2443] [ 0.004860] ACPI: Reserving WAET table memory at [mem 0x2ffe2444-0x2ffe246b] [ 0.004877] 0MB HIGHMEM available. [ 0.004878] 767MB LOWMEM available. [ 0.004879] mapped low ram: 0 - 2ffd8000 [ 0.004880] low ram: 0 - 2ffd8000 [ 0.004882] Zone ranges: [ 0.004882] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004885] Normal [mem 0x0000000001000000-0x000000002ffd7fff] [ 0.004887] HighMem empty [ 0.004888] Movable zone start for each node [ 0.004888] Early memory node ranges [ 0.004889] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004890] node 0: [mem 0x0000000000100000-0x000000002ffd7fff] [ 0.004892] Initmem setup node 0 [mem 0x0000000000001000-0x000000002ffd7fff] [ 0.005284] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005346] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.009067] Using APIC driver default [ 0.009581] ACPI: PM-Timer IO Port: 0x608 [ 0.009590] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.009628] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.009632] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.009634] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.009635] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.009636] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.009638] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.009642] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.009644] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.009647] TSC deadline timer available [ 0.009649] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.009663] [mem 0x30000000-0xafffffff] available for PCI devices [ 0.009665] Booting paravirtualized kernel on KVM [ 0.009666] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.009670] setup_percpu: NR_CPUS:8 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.010113] percpu: Embedded 33 pages/cpu s104724 r0 d30444 u135168 [ 0.010136] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 [ 0.010347] random: crng init done [ 0.010373] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.010388] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.010438] Built 1 zonelists, mobility grouping on. Total pages: 194550 [ 0.010930] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.010932] Initializing HighMem for node 0 (00000000:00000000) [ 0.011750] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.011755] Memory: 753344K/785880K available (13320K kernel code, 1700K rwdata, 3536K rodata, 1036K init, 624K bss, 32536K reserved, 0K cma-reserved, 0K highmem) [ 0.012189] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.012203] ftrace: allocating 49229 entries in 97 pages [ 0.020492] ftrace: allocated 97 pages with 3 groups [ 0.020521] trace event string verifier disabled [ 0.020535] Dynamic Preempt: full [ 0.020946] rcu: Preemptible hierarchical RCU implementation. [ 0.020947] rcu: RCU event tracing is enabled. [ 0.020948] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.020949] All grace periods are expedited (rcu_expedited). [ 0.020950] Trampoline variant of Tasks RCU enabled. [ 0.020951] Rude variant of Tasks RCU enabled. [ 0.020951] Tracing variant of Tasks RCU enabled. [ 0.020952] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.020953] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.030279] NR_IRQS: 2304, nr_irqs: 456, preallocated irqs: 16 [ 0.030455] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.030573] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.037375] Console: colour VGA+ 80x25 [ 0.037417] printk: console [ttyS0] enabled [ 0.147478] ACPI: Core revision 20230331 [ 0.149709] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.151326] APIC: Switch to symmetric I/O mode setup [ 0.152137] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.154281] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.155300] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.157081] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.158207] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.159084] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.160084] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.161084] Spectre V2 : Mitigation: Retpolines [ 0.162083] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.163083] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.164083] Speculative Store Bypass: Vulnerable [ 0.164874] L1TF: Kernel not compiled for PAE. No mitigation for L1TF [ 0.165083] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.166083] MMIO Stale Data: Unknown: No mitigations [ 0.167083] SRBDS: Unknown: Dependent on hypervisor status [ 0.168092] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.169083] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.170083] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.171084] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.172083] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.173569] Freeing SMP alternatives memory: 52K [ 0.174084] pid_max: default: 32768 minimum: 301 [ 0.175104] LSM: initializing lsm=capability,landlock,integrity [ 0.176090] landlock: Up and running. [ 0.176736] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.177085] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.178388] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.179655] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.180105] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.181104] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.182103] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.183104] signal: max sigframe size: 1760 [ 0.183896] rcu: Hierarchical SRCU implementation. [ 0.184085] rcu: Max phase no-delay instances is 400. [ 0.185153] smp: Bringing up secondary CPUs ... [ 0.186055] smpboot: x86: Booting SMP configuration: [ 0.186087] .... node #0, CPUs: #1 #2 #3 [ 0.187289] smp: Brought up 1 node, 4 CPUs [ 0.188803] smpboot: Max logical packages: 1 [ 0.189091] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.190502] devtmpfs: initialized [ 0.191390] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.192088] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.193123] pinctrl core: initialized pinctrl subsystem [ 0.194219] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.195377] thermal_sys: Registered thermal governor 'step_wise' [ 0.195379] thermal_sys: Registered thermal governor 'user_space' [ 0.196099] cpuidle: using governor menu [ 0.198045] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.198087] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.199085] PCI: Using MMCONFIG for extended config space [ 0.200016] PCI: Using configuration type 1 for base access [ 0.200379] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.218083] raid6: sse2x2 gen() 13072 MB/s [ 0.235085] raid6: sse2x1 gen() 11021 MB/s [ 0.252086] raid6: sse1x2 gen() 6609 MB/s [ 0.270083] raid6: sse1x1 gen() 5499 MB/s [ 0.270861] raid6: using algorithm sse2x2 gen() 13072 MB/s [ 0.288083] raid6: .... xor() 7357 MB/s, rmw enabled [ 0.288985] raid6: using ssse3x1 recovery algorithm [ 0.289658] ACPI: Added _OSI(Module Device) [ 0.290086] ACPI: Added _OSI(Processor Device) [ 0.290819] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.291085] ACPI: Added _OSI(Processor Aggregator Device) [ 0.293016] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.294274] ACPI: Interpreter enabled [ 0.294912] ACPI: PM: (supports S0 S3 S5) [ 0.295086] ACPI: Using IOAPIC for interrupt routing [ 0.295921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.296084] PCI: Using E820 reservations for host bridge windows [ 0.297156] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.300311] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.301090] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.302133] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.303146] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.304098] acpi resource window ([0x100000000-0x8ffffffff] ignored, not CPU addressable) [ 0.305159] PCI host bridge to bus 0000:00 [ 0.306087] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.307085] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.308084] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.309084] pci_bus 0000:00: root bus resource [mem 0x30000000-0xafffffff window] [ 0.310085] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.311085] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.312059] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.312725] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.314990] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.316085] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.323086] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.325086] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.326865] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.328085] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.330086] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.334085] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.336866] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.340105] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.343119] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.345111] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.348724] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.349208] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.350963] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.352086] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.354814] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.358086] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.360941] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.363053] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.364169] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.367065] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.368888] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.370988] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.372106] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.373557] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.377959] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.378590] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.379377] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.383085] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.384451] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.386227] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.388993] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.390438] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.391173] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.392186] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.393170] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.394168] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.395171] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.396167] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.397167] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.398123] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.399096] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.400089] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.401062] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.401096] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.402077] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.402099] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.403093] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.404586] iommu: Default domain type: Translated [ 0.405086] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.406233] SCSI subsystem initialized [ 0.407130] ACPI: bus type USB registered [ 0.407857] usbcore: registered new interface driver usbfs [ 0.408098] usbcore: registered new interface driver hub [ 0.408974] usbcore: registered new device driver usb [ 0.409118] pps_core: LinuxPPS API ver. 1 registered [ 0.409936] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.410089] PTP clock support registered [ 0.411378] Bluetooth: Core ver 2.22 [ 0.412004] NET: Registered PF_BLUETOOTH protocol family [ 0.412085] Bluetooth: HCI device and connection manager initialized [ 0.413089] Bluetooth: HCI socket layer initialized [ 0.413892] Bluetooth: L2CAP socket layer initialized [ 0.414090] Bluetooth: SCO socket layer initialized [ 0.414927] PCI: Using ACPI for IRQ routing [ 0.480603] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.481081] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.481081] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.481089] vgaarb: loaded [ 0.481878] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.482085] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.485228] clocksource: Switched to clocksource kvm-clock [ 0.486230] pnp: PnP ACPI init [ 0.487031] system 00:05: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.491100] pnp: PnP ACPI: found 6 devices [ 0.530783] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.532341] NET: Registered PF_INET protocol family [ 0.533226] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.534956] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.536342] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.537587] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.538837] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.540044] TCP: Hash tables configured (established 8192 bind 8192) [ 0.541111] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.544005] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.545215] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.546603] RPC: Registered named UNIX socket transport module. [ 0.547586] RPC: Registered udp transport module. [ 0.548334] RPC: Registered tcp transport module. [ 0.549093] RPC: Registered tcp-with-tls transport module. [ 0.549968] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.554644] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.555663] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.556680] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.557783] pci_bus 0000:00: resource 7 [mem 0x30000000-0xafffffff window] [ 0.558905] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.560583] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.562767] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.564423] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.566095] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.567760] PCI: CLS 0 bytes, default 64 [ 0.568863] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.570136] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.573035] Initialise system trusted keyrings [ 0.573815] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.574984] NFS: Registering the id_resolver key type [ 0.575698] Key type id_resolver registered [ 0.576282] Key type id_legacy registered [ 0.577303] Key type cifs.idmap registered [ 0.594346] xor: automatically using best checksumming function avx [ 0.595338] Key type asymmetric registered [ 0.595921] Asymmetric key parser 'x509' registered [ 0.596600] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.597602] io scheduler mq-deadline registered [ 0.598227] io scheduler kyber registered [ 0.598794] io scheduler bfq registered [ 0.599814] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.601857] ACPI: button: Power Button [PWRF] [ 0.604764] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.609688] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.614705] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.625435] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.629688] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.632414] 00:01: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A [ 0.635542] 00:02: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.638606] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.644076] Linux agpgart interface v0.103 [ 0.645785] ACPI: bus type drm_connector registered [ 0.649314] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.651323] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.658942] Console: switching to colour dummy device 80x25 [ 0.661288] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.661293] [drm] features: -context_init [ 0.666441] [drm] number of scanouts: 1 [ 0.667733] [drm] number of cap sets: 0 [ 0.669822] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 0.691875] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.720016] Console: switching to colour frame buffer device 160x50 [ 0.751553] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.760037] brd: module loaded [ 0.764701] loop: module loaded [ 0.766296] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.771340] virtio_blk virtio3: [vda] 6049028 512-byte logical blocks (3.10 GB/2.88 GiB) [ 0.778545] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.782091] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.786426] scsi host0: ahci [ 0.788478] scsi host1: ahci [ 0.790285] scsi host2: ahci [ 0.792106] scsi host3: ahci [ 0.794601] scsi host4: ahci [ 0.796824] scsi host5: ahci [ 0.798670] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.802519] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.806020] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.809320] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.812498] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.815468] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.821000] e100: Intel(R) PRO/100 Network Driver [ 0.822837] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.824967] e1000: Intel(R) PRO/1000 Network Driver [ 0.826865] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.829108] e1000e: Intel(R) PRO/1000 Network Driver [ 0.831016] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.833304] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.835247] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.838708] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.841311] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.844026] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.846516] hub 1-0:1.0: USB hub found [ 0.848009] hub 1-0:1.0: 2 ports detected [ 0.850258] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.852963] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.856188] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.864771] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.867401] hub 2-0:1.0: USB hub found [ 0.868883] hub 2-0:1.0: 6 ports detected [ 0.892792] hub 1-0:1.0: USB hub found [ 0.894535] hub 1-0:1.0: 2 ports detected [ 0.896405] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.897452] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.898947] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.900319] hub 3-0:1.0: USB hub found [ 0.901060] hub 3-0:1.0: 2 ports detected [ 0.902757] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.903748] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.905320] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.906717] hub 4-0:1.0: USB hub found [ 0.907523] hub 4-0:1.0: 2 ports detected [ 0.908436] usbcore: registered new interface driver usb-storage [ 0.909735] usbcore: registered new interface driver usbserial_generic [ 0.911086] usbserial: USB Serial support registered for generic [ 0.912201] usbcore: registered new interface driver ftdi_sio [ 0.913256] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.914639] usbcore: registered new interface driver pl2303 [ 0.915682] usbserial: USB Serial support registered for pl2303 [ 0.916858] i8042: PNP: No PS/2 controller found. [ 0.917896] mousedev: PS/2 mouse device common for all mice [ 0.919132] rtc_cmos 00:04: RTC can wake from S4 [ 0.920677] rtc_cmos 00:04: registered as rtc0 [ 0.921610] rtc_cmos 00:04: setting system clock to 2023-10-02T12:50:09 UTC (1696251009) [ 0.923139] rtc_cmos 00:04: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.925047] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.925562] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.926848] intel_pstate: CPU model not supported [ 0.929101] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.929678] sdhci: Secure Digital Host Controller Interface driver [ 0.931756] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.932874] sdhci: Copyright(c) Pierre Ossman [ 0.932910] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.937868] usbcore: registered new interface driver usbhid [ 0.947939] usbhid: USB HID core driver [ 0.948965] u32 classifier [ 0.949647] input device check on [ 0.950542] Actions configured [ 0.951562] NET: Registered PF_INET6 protocol family [ 0.953576] Segment Routing with IPv6 [ 0.954609] In-situ OAM (IOAM) with IPv6 [ 0.955694] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.957419] NET: Registered PF_PACKET protocol family [ 0.958739] Bridge firewalling registered [ 0.959758] Key type dns_resolver registered [ 0.961009] NET: Registered PF_VSOCK protocol family [ 0.963180] IPI shorthand broadcast: enabled [ 0.967159] sched_clock: Marking stable (843003808, 123620057)->(1078214151, -111590286) [ 0.969215] registered taskstats version 1 [ 0.970281] Loading compiled-in X.509 certificates [ 0.974496] Key type .fscrypt registered [ 0.975428] Key type fscrypt-provisioning registered [ 0.977054] Btrfs loaded, zoned=no, fsverity=no [ 0.979024] Key type encrypted registered [ 0.980103] printk: console [netcon0] enabled [ 0.981122] netconsole: network logging started [ 1.107722] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.128874] ata5: SATA link down (SStatus 0 SControl 300) [ 1.131489] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.134320] ata2: SATA link down (SStatus 0 SControl 300) [ 1.136490] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.138601] ata3.00: applying bridge limits [ 1.140465] ata4: SATA link down (SStatus 0 SControl 300) [ 1.142814] ata1: SATA link down (SStatus 0 SControl 300) [ 1.144999] ata3.00: configured for UDMA/100 [ 1.147090] ata6: SATA link down (SStatus 0 SControl 300) [ 1.149659] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.155403] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.157852] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.160399] sr 2:0:0:0: [sr0] Hmm, seems the drive doesn't support multisession CD's [ 1.179651] IP-Config: Complete: [ 1.180221] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.181977] host=192.168.7.2, domain=, nis-domain=(none) [ 1.183186] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.183188] nameserver0=8.8.8.8 [ 1.185046] clk: Disabling unused clocks [ 1.186101] md: Waiting for all devices to be available before autodetect [ 1.186932] md: If you don't use raid, use raid=noautodetect [ 1.187627] md: Autodetecting RAID arrays. [ 1.188127] md: autorun ... [ 1.188465] md: ... autorun DONE. [ 1.215776] EXT4-fs (vda): mounted filesystem b5fcd71e-039e-42ee-bcd7-9d1a439adafc r/w with ordered data mode. Quota mode: disabled. [ 1.218665] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.220267] devtmpfs: mounted [ 1.224042] Freeing unused kernel image (initmem) memory: 1036K [ 1.225948] Write protecting kernel text and read-only data: 16860k [ 1.227450] Run /sbin/init as init process INIT: version 3.04 booting [ 1.247532] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.251308] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.368688] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.390734] udevd[138]: starting version 3.2.12 [ 1.411008] udevd[139]: starting eudev-3.2.12 [ 1.505067] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.558844] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.629411] EXT4-fs (vda): re-mounted b5fcd71e-039e-42ee-bcd7-9d1a439adafc r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting OpenBSD Secure Shell server: sshd done. Starting Xserver Starting rpcbind daemon... done. Starting bluetooth: bluetoothd. X.Org X Server 1.21.1.8 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86 6.5.5-yocto-standard #1 SMP PREEMPT_DYNAMIC Fri Sep 29 00:16:28 UTC 2023 i686 Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. Starting syslogd/klogd: [ 3.310365] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.313278] Bluetooth: BNEP filters: protocol multicast (==) Log file: "[ 3.315401] Bluetooth: BNEP socket layer initialized /var/log/Xorg.0.log", Time: Mon Oct 2 12:50:12 2023 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [A[74G[ ok ] Starting Telephony daemon Starting crond: OK Starting tcf-agent: OK D-BUS per-session daemon address is: unix:path=/tmp/dbus-ggCnUIfxo4,guid=fc4964542a0670f23f920cc8651abc84 Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput [ 4.002393] pactl[661]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop dbus-daemon[672]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=649 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[672]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry Poky (Yocto Project Reference Distro) 4.2+snapshot-b2d7ba9ec6df7a55ff5b22b16337f722bf44757f qemux86 ttyS0 qemux86 login: [ 148.016678] hellomod: loading out-of-tree module taints kernel. [ 148.019069] Hello world! [ 149.517002] Cleaning up hellomod.