[    0.000000] Linux version 6.5.5-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20230926) #1 SMP PREEMPT_DYNAMIC Wed Oct  4 18:08:28 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.26::192.168.7.25:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000002] kvm-clock: using sched offset of 604260167 cycles
[    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000009] tsc: Detected 2599.996 MHz processor
[    0.001774] last_pfn = 0x3ffd8 max_arch_pfn = 0x400000000
[    0.001807] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001811] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006874] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.007048] ACPI: Early table checksum verification disabled
[    0.007055] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS )
[    0.007077] ACPI: RSDT 0x000000003FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007085] ACPI: FACP 0x000000003FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007093] ACPI: DSDT 0x000000003FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007098] ACPI: FACS 0x000000003FFE0000 000040
[    0.007102] ACPI: APIC 0x000000003FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007106] ACPI: HPET 0x000000003FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007110] ACPI: MCFG 0x000000003FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007115] ACPI: WAET 0x000000003FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007118] ACPI: Reserving FACP table memory at [mem 0x3ffe2217-0x3ffe230a]
[    0.007121] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2216]
[    0.007123] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]
[    0.007124] ACPI: Reserving APIC table memory at [mem 0x3ffe230b-0x3ffe239a]
[    0.007126] ACPI: Reserving HPET table memory at [mem 0x3ffe239b-0x3ffe23d2]
[    0.007127] ACPI: Reserving MCFG table memory at [mem 0x3ffe23d3-0x3ffe240e]
[    0.007129] ACPI: Reserving WAET table memory at [mem 0x3ffe240f-0x3ffe2436]
[    0.007203] Zone ranges:
[    0.007205]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007209]   DMA32    [mem 0x0000000001000000-0x000000003ffd7fff]
[    0.007212]   Normal   empty
[    0.007214] Movable zone start for each node
[    0.007215] Early memory node ranges
[    0.007215]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.007218]   node   0: [mem 0x0000000000100000-0x000000003ffd7fff]
[    0.007220] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]
[    0.007233] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.007280] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.012183] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.012658] ACPI: PM-Timer IO Port: 0x608
[    0.012674] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.012719] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.012724] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.012727] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.012729] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.012731] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.012733] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.012738] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.012740] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.012746] TSC deadline timer available
[    0.012749] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.012775] [mem 0x40000000-0xafffffff] available for PCI devices
[    0.012778] Booting paravirtualized kernel on KVM
[    0.012781] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.012788] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.013528] percpu: Embedded 56 pages/cpu s189928 r8192 d31256 u524288
[    0.013573] Kernel command line: root=/dev/vda rw  ip=192.168.7.26::192.168.7.25:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.013664] random: crng init done
[    0.013843] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.013938] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.014032] Built 1 zonelists, mobility grouping on.  Total pages: 257752
[    0.014652] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.018113] Memory: 993360K/1048024K available (18432K kernel code, 2306K rwdata, 5176K rodata, 3376K init, 2336K bss, 54404K reserved, 0K cma-reserved)
[    0.018195] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.018209] Kernel/User page tables isolation: enabled
[    0.018247] ftrace: allocating 50643 entries in 198 pages
[    0.030698] ftrace: allocated 198 pages with 4 groups
[    0.030783] Dynamic Preempt: full
[    0.031291] rcu: Preemptible hierarchical RCU implementation.
[    0.031293] rcu: 	RCU event tracing is enabled.
[    0.031294] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.031297] 	All grace periods are expedited (rcu_expedited).
[    0.031298] 	Trampoline variant of Tasks RCU enabled.
[    0.031299] 	Rude variant of Tasks RCU enabled.
[    0.031300] 	Tracing variant of Tasks RCU enabled.
[    0.031301] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.031302] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.037105] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.037341] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.037453] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.042807] Console: colour VGA+ 80x25
[    0.042856] printk: console [ttyS0] enabled
[    0.126006] ACPI: Core revision 20230331
[    0.126695] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.128041] APIC: Switch to symmetric I/O mode setup
[    0.130510] x2apic enabled
[    0.131075] Switched APIC routing to physical x2apic.
[    0.132623] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.133513] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.134830] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.136852] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.137512] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.137835] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.138835] Spectre V2 : Mitigation: Retpolines
[    0.139833] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.140833] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.141616] Speculative Store Bypass: Vulnerable
[    0.141834] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.142834] MMIO Stale Data: Unknown: No mitigations
[    0.143444] SRBDS: Unknown: Dependent on hypervisor status
[    0.143848] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.144833] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.145833] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.146834] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.147833] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.179264] Freeing SMP alternatives memory: 52K
[    0.179836] pid_max: default: 32768 minimum: 301
[    0.180874] LSM: initializing lsm=capability,landlock,integrity
[    0.181842] landlock: Up and running.
[    0.182373] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.182837] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.184271] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.185090] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.185873] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.186778] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.186871] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.187860] signal: max sigframe size: 1776
[    0.188485] rcu: Hierarchical SRCU implementation.
[    0.188837] rcu: 	Max phase no-delay instances is 400.
[    0.189737] smp: Bringing up secondary CPUs ...
[    0.189954] smpboot: x86: Booting SMP configuration:
[    0.190556] .... node  #0, CPUs:      #1 #2 #3
[    0.190990] smp: Brought up 1 node, 4 CPUs
[    0.192326] smpboot: Max logical packages: 1
[    0.192806] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.194835] devtmpfs: initialized
[    0.195889] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.196848] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.197452] pinctrl core: initialized pinctrl subsystem
[    0.198853] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.199551] thermal_sys: Registered thermal governor 'step_wise'
[    0.199553] thermal_sys: Registered thermal governor 'user_space'
[    0.199851] cpuidle: using governor menu
[    0.200741] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.200836] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.201388] PCI: Using configuration type 1 for base access
[    0.202067] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.231830] raid6: sse2x4   gen()  8496 MB/s
[    0.249207] raid6: sse2x2   gen()  8449 MB/s
[    0.267114] raid6: sse2x1   gen()  6955 MB/s
[    0.267767] raid6: using algorithm sse2x4 gen() 8496 MB/s
[    0.285527] raid6: .... xor() 4480 MB/s, rmw enabled
[    0.285836] raid6: using ssse3x2 recovery algorithm
[    0.286718] ACPI: Added _OSI(Module Device)
[    0.286836] ACPI: Added _OSI(Processor Device)
[    0.287430] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.287836] ACPI: Added _OSI(Processor Aggregator Device)
[    0.289994] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.293232] ACPI: Interpreter enabled
[    0.293858] ACPI: PM: (supports S0 S3 S5)
[    0.294312] ACPI: Using IOAPIC for interrupt routing
[    0.294901] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.295838] PCI: Using E820 reservations for host bridge windows
[    0.296708] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.300916] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.301681] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.301921] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.302763] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.302985] PCI host bridge to bus 0000:00
[    0.303568] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.303837] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.304618] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.304837] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]
[    0.305748] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.305837] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.306754] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.306943] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.308330] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.310839] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.312839] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.319839] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.321839] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.323421] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.324837] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.326763] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.331841] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.334598] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.337858] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.340739] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.342708] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.346753] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.346911] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.348647] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.350844] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.352802] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.357845] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.362588] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.365370] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.367115] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.370374] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.372659] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.375385] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.377144] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.378443] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.384131] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.385226] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.386140] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.391840] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.393394] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.395290] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.398663] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.400490] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.400940] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.401943] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.402689] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.402928] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.403852] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.404650] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.404974] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.405779] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.405852] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.406589] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.406852] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.407631] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.407852] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.408662] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.408853] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.410287] iommu: Default domain type: Translated
[    0.410835] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.411802] SCSI subsystem initialized
[    0.411906] ACPI: bus type USB registered
[    0.412425] usbcore: registered new interface driver usbfs
[    0.412855] usbcore: registered new interface driver hub
[    0.413527] usbcore: registered new device driver usb
[    0.413867] pps_core: LinuxPPS API ver. 1 registered
[    0.414510] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.414845] PTP clock support registered
[    0.416254] Bluetooth: Core ver 2.22
[    0.416749] NET: Registered PF_BLUETOOTH protocol family
[    0.416836] Bluetooth: HCI device and connection manager initialized
[    0.417570] Bluetooth: HCI socket layer initialized
[    0.417840] Bluetooth: L2CAP socket layer initialized
[    0.418468] Bluetooth: SCO socket layer initialized
[    0.418920] PCI: Using ACPI for IRQ routing
[    0.460203] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.460439] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.460830] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.460842] vgaarb: loaded
[    0.461131] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.461499] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.467967] clocksource: Switched to clocksource kvm-clock
[    0.488105] pnp: PnP ACPI init
[    0.488920] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.490066] pnp: PnP ACPI: found 5 devices
[    0.500090] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.501285] NET: Registered PF_INET protocol family
[    0.501972] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.503454] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.504108] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.504697] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.505587] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.506522] TCP: Hash tables configured (established 8192 bind 8192)
[    0.507381] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.508210] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.509126] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.511021] RPC: Registered named UNIX socket transport module.
[    0.511755] RPC: Registered udp transport module.
[    0.512328] RPC: Registered tcp transport module.
[    0.512908] RPC: Registered tcp-with-tls transport module.
[    0.513567] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.514358] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.515126] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.515864] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.516719] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]
[    0.519185] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.520052] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.521296] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.523173] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.524904] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.526609] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.528178] PCI: CLS 0 bytes, default 64
[    0.545194] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.557796] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.560546] Initialise system trusted keyrings
[    0.561542] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.566583] NFS: Registering the id_resolver key type
[    0.567354] Key type id_resolver registered
[    0.567946] Key type id_legacy registered
[    0.569214] Key type cifs.idmap registered
[    0.586762] xor: automatically using best checksumming function   avx       
[    0.590230] Key type asymmetric registered
[    0.590671] Asymmetric key parser 'x509' registered
[    0.591389] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.592210] io scheduler mq-deadline registered
[    0.592552] io scheduler kyber registered
[    0.592866] io scheduler bfq registered
[    0.593535] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.597661] ACPI: button: Power Button [PWRF]
[    0.599230] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.601472] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.603705] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.608882] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.627628] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.628650] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.629860] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.637418] Linux agpgart interface v0.103
[    0.641507] ACPI: bus type drm_connector registered
[    0.642327] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.643011] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.646043] Console: switching to colour dummy device 80x25
[    0.647031] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.647035] [drm] features: -context_init
[    0.649113] [drm] number of scanouts: 1
[    0.649635] [drm] number of cap sets: 0
[    0.650696] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.665937] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.682959] Console: switching to colour frame buffer device 160x50
[    0.710790] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.715820] brd: module loaded
[    0.718619] loop: module loaded
[    0.719297] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.721706] virtio_blk virtio3: [vda] 735192 512-byte logical blocks (376 MB/359 MiB)
[    0.749303] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.750358] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.752433] scsi host0: ahci
[    0.753236] scsi host1: ahci
[    0.754405] scsi host2: ahci
[    0.755110] scsi host3: ahci
[    0.755854] scsi host4: ahci
[    0.756577] scsi host5: ahci
[    0.757125] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.758003] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.758788] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.759566] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.760379] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.761257] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.822702] e100: Intel(R) PRO/100 Network Driver
[    0.823363] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.824091] e1000: Intel(R) PRO/1000 Network Driver
[    0.824710] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.825470] e1000e: Intel(R) PRO/1000 Network Driver
[    0.826082] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.826814] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.827468] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.830514] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.831187] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.832180] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.833684] hub 1-0:1.0: USB hub found
[    0.834237] hub 1-0:1.0: 2 ports detected
[    0.835150] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.836509] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.837576] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.843598] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.844760] hub 2-0:1.0: USB hub found
[    0.845259] hub 2-0:1.0: 6 ports detected
[    0.866645] hub 1-0:1.0: USB hub found
[    0.870620] hub 1-0:1.0: 2 ports detected
[    0.871433] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.872217] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.873728] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.874914] hub 3-0:1.0: USB hub found
[    0.875388] hub 3-0:1.0: 2 ports detected
[    0.876970] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.877645] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.878658] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.879876] hub 4-0:1.0: USB hub found
[    0.880406] hub 4-0:1.0: 2 ports detected
[    0.881411] usbcore: registered new interface driver usb-storage
[    0.882231] usbcore: registered new interface driver usbserial_generic
[    0.883157] usbserial: USB Serial support registered for generic
[    0.884042] usbcore: registered new interface driver ftdi_sio
[    0.884795] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.885705] usbcore: registered new interface driver pl2303
[    0.886347] usbserial: USB Serial support registered for pl2303
[    0.887107] i8042: PNP: No PS/2 controller found.
[    0.887827] mousedev: PS/2 mouse device common for all mice
[    0.888763] rtc_cmos 00:03: RTC can wake from S4
[    0.889862] rtc_cmos 00:03: registered as rtc0
[    0.890447] rtc_cmos 00:03: setting system clock to 2023-10-05T00:21:13 UTC (1696465273)
[    0.891487] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.892953] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.892987] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    0.893997] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.895058] intel_pstate: CPU model not supported
[    0.895622] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.896234] sdhci: Secure Digital Host Controller Interface driver
[    0.897840] sdhci: Copyright(c) Pierre Ossman
[    0.898359] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.899193] usbcore: registered new interface driver usbhid
[    0.899946] usbhid: USB HID core driver
[    0.900420] u32 classifier
[    0.900812]     input device check on
[    0.901257]     Actions configured
[    0.901774] NET: Registered PF_INET6 protocol family
[    0.902864] Segment Routing with IPv6
[    0.903317] In-situ OAM (IOAM) with IPv6
[    0.903824] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.904740] NET: Registered PF_PACKET protocol family
[    0.905428] Bridge firewalling registered
[    0.905936] Key type dns_resolver registered
[    0.906536] NET: Registered PF_VSOCK protocol family
[    0.907677] IPI shorthand broadcast: enabled
[    0.911609] sched_clock: Marking stable (818004905, 93477073)->(1076524049, -165042071)
[    0.913505] registered taskstats version 1
[    0.914147] Loading compiled-in X.509 certificates
[    0.918018] Key type .fscrypt registered
[    0.918643] Key type fscrypt-provisioning registered
[    0.919864] Btrfs loaded, zoned=no, fsverity=no
[    0.921089] Key type encrypted registered
[    0.921813] printk: console [netcon0] enabled
[    0.922371] netconsole: network logging started
[    1.083134] ata2: SATA link down (SStatus 0 SControl 300)
[    1.084519] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.127952] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.128952] ata5: SATA link down (SStatus 0 SControl 300)
[    1.129788] ata4: SATA link down (SStatus 0 SControl 300)
[    1.130548] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.131383] ata3.00: applying bridge limits
[    1.132110] ata1: SATA link down (SStatus 0 SControl 300)
[    1.133142] ata3.00: configured for UDMA/100
[    1.134062] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.136769] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.137630] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.138089] ata6: SATA link down (SStatus 0 SControl 300)
[    1.139814] sr 2:0:0:0: [sr0] Hmm, seems the drive doesn't support multisession CD's
[    1.154527] IP-Config: Complete:
[    1.155025]      device=eth0, hwaddr=52:54:00:12:34:1a, ipaddr=192.168.7.26, mask=255.255.255.0, gw=192.168.7.25
[    1.156189]      host=192.168.7.26, domain=, nis-domain=(none)
[    1.156933]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.156936]      nameserver0=8.8.8.8
[    1.158289] clk: Disabling unused clocks
[    1.159110] md: Waiting for all devices to be available before autodetect
[    1.159670] md: If you don't use raid, use raid=noautodetect
[    1.160104] md: Autodetecting RAID arrays.
[    1.160417] md: autorun ...
[    1.160634] md: ... autorun DONE.
[    1.168204] EXT4-fs (vda): mounted filesystem 9ea0a278-e687-45a4-a7e6-54b90fb1acaa r/w with ordered data mode. Quota mode: disabled.
[    1.169274] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.169891] devtmpfs: mounted
[    1.171761] Freeing unused kernel image (initmem) memory: 3376K
[    1.175510] Write protecting the kernel read-only data: 24576k
[    1.176601] Freeing unused kernel image (rodata/data gap) memory: 968K
[    1.177224] Run /sbin/init as init process
INIT: version 3.04 booting
[    1.252005] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.253170] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
Starting udev
[    1.316749] udevd[126]: starting version 3.2.12
[    1.328900] udevd[127]: starting eudev-3.2.12
[    1.371603] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.505068] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.557899] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.624727] EXT4-fs (vda): re-mounted 9ea0a278-e687-45a4-a7e6-54b90fb1acaa r/w. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.2+snapshot-fc60772fa9e90bfb278d84f21c624df1fd812ed0 qemux86-64 /dev/ttyS0

qemux86-64 login: 