[    0.000000] Linux version 6.5.5-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20230926) #1 SMP PREEMPT_DYNAMIC Wed Oct  4 18:08:28 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000002] kvm-clock: using sched offset of 613577806 cycles
[    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000010] tsc: Detected 2599.996 MHz processor
[    0.001802] last_pfn = 0x3ffd8 max_arch_pfn = 0x400000000
[    0.001834] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001838] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006973] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.007156] ACPI: Early table checksum verification disabled
[    0.007162] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS )
[    0.007184] ACPI: RSDT 0x000000003FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007192] ACPI: FACP 0x000000003FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007201] ACPI: DSDT 0x000000003FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007206] ACPI: FACS 0x000000003FFE0000 000040
[    0.007210] ACPI: APIC 0x000000003FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007215] ACPI: HPET 0x000000003FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007220] ACPI: MCFG 0x000000003FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007224] ACPI: WAET 0x000000003FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007228] ACPI: Reserving FACP table memory at [mem 0x3ffe2217-0x3ffe230a]
[    0.007231] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2216]
[    0.007233] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]
[    0.007235] ACPI: Reserving APIC table memory at [mem 0x3ffe230b-0x3ffe239a]
[    0.007236] ACPI: Reserving HPET table memory at [mem 0x3ffe239b-0x3ffe23d2]
[    0.007238] ACPI: Reserving MCFG table memory at [mem 0x3ffe23d3-0x3ffe240e]
[    0.007240] ACPI: Reserving WAET table memory at [mem 0x3ffe240f-0x3ffe2436]
[    0.008002] Zone ranges:
[    0.008005]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008009]   DMA32    [mem 0x0000000001000000-0x000000003ffd7fff]
[    0.008012]   Normal   empty
[    0.008014] Movable zone start for each node
[    0.008015] Early memory node ranges
[    0.008016]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008018]   node   0: [mem 0x0000000000100000-0x000000003ffd7fff]
[    0.008021] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]
[    0.008035] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008079] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.012936] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.013422] ACPI: PM-Timer IO Port: 0x608
[    0.013438] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.013484] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.013489] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.013492] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.013494] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.013497] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.013499] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.013504] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.013506] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.013512] TSC deadline timer available
[    0.013514] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.013541] [mem 0x40000000-0xafffffff] available for PCI devices
[    0.013543] Booting paravirtualized kernel on KVM
[    0.013547] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.013554] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.014278] percpu: Embedded 56 pages/cpu s189928 r8192 d31256 u524288
[    0.014324] Kernel command line: root=/dev/vda rw  ip=192.168.7.14::192.168.7.13:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.014413] random: crng init done
[    0.014561] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.014640] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.014731] Built 1 zonelists, mobility grouping on.  Total pages: 257752
[    0.015349] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.018868] Memory: 993356K/1048024K available (18432K kernel code, 2306K rwdata, 5176K rodata, 3376K init, 2336K bss, 54408K reserved, 0K cma-reserved)
[    0.018948] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.018962] Kernel/User page tables isolation: enabled
[    0.019000] ftrace: allocating 50643 entries in 198 pages
[    0.031298] ftrace: allocated 198 pages with 4 groups
[    0.031382] Dynamic Preempt: full
[    0.031884] rcu: Preemptible hierarchical RCU implementation.
[    0.031886] rcu: 	RCU event tracing is enabled.
[    0.031887] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.031889] 	All grace periods are expedited (rcu_expedited).
[    0.031890] 	Trampoline variant of Tasks RCU enabled.
[    0.031891] 	Rude variant of Tasks RCU enabled.
[    0.031892] 	Tracing variant of Tasks RCU enabled.
[    0.031893] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.031894] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.037508] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.037749] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.037861] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.043521] Console: colour VGA+ 80x25
[    0.043573] printk: console [ttyS0] enabled
[    0.119652] ACPI: Core revision 20230331
[    0.120123] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.120889] APIC: Switch to symmetric I/O mode setup
[    0.121436] x2apic enabled
[    0.121807] Switched APIC routing to physical x2apic.
[    0.123471] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.124318] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.125662] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.126803] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.127665] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.128666] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.129667] Spectre V2 : Mitigation: Retpolines
[    0.130669] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.131670] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.132666] Speculative Store Bypass: Vulnerable
[    0.133666] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.134665] MMIO Stale Data: Unknown: No mitigations
[    0.135252] SRBDS: Unknown: Dependent on hypervisor status
[    0.135688] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.136665] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.137665] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.138666] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.139665] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.170661] Freeing SMP alternatives memory: 52K
[    0.170668] pid_max: default: 32768 minimum: 301
[    0.171704] LSM: initializing lsm=capability,landlock,integrity
[    0.172559] landlock: Up and running.
[    0.172715] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.173670] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.175072] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.175942] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.176705] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.177667] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.178706] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.179691] signal: max sigframe size: 1776
[    0.180264] rcu: Hierarchical SRCU implementation.
[    0.180668] rcu: 	Max phase no-delay instances is 400.
[    0.181614] smp: Bringing up secondary CPUs ...
[    0.181861] smpboot: x86: Booting SMP configuration:
[    0.182504] .... node  #0, CPUs:      #1 #2 #3
[    0.183694] smp: Brought up 1 node, 4 CPUs
[    0.184677] smpboot: Max logical packages: 1
[    0.185291] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.186667] devtmpfs: initialized
[    0.187934] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.188672] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.189581] pinctrl core: initialized pinctrl subsystem
[    0.190905] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.191929] thermal_sys: Registered thermal governor 'step_wise'
[    0.191932] thermal_sys: Registered thermal governor 'user_space'
[    0.192695] cpuidle: using governor menu
[    0.193862] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.194669] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.195622] PCI: Using configuration type 1 for base access
[    0.195941] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.213260] raid6: sse2x4   gen()  8125 MB/s
[    0.231394] raid6: sse2x2   gen()  8315 MB/s
[    0.251505] raid6: sse2x1   gen()  6477 MB/s
[    0.251666] raid6: using algorithm sse2x2 gen() 8315 MB/s
[    0.269169] raid6: .... xor() 5178 MB/s, rmw enabled
[    0.269675] raid6: using ssse3x2 recovery algorithm
[    0.270371] ACPI: Added _OSI(Module Device)
[    0.270666] ACPI: Added _OSI(Processor Device)
[    0.271175] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.271666] ACPI: Added _OSI(Processor Aggregator Device)
[    0.274083] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.278247] ACPI: Interpreter enabled
[    0.281709] ACPI: PM: (supports S0 S3 S5)
[    0.282217] ACPI: Using IOAPIC for interrupt routing
[    0.282786] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.283666] PCI: Using E820 reservations for host bridge windows
[    0.284492] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.288210] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.289677] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.290792] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.291661] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.302708] PCI host bridge to bus 0000:00
[    0.303627] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.303677] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.304592] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.305676] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]
[    0.306670] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.307580] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.308672] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.311793] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.313185] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.316671] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.319671] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.329593] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.331675] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.333205] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.337549] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.340446] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.347677] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.353216] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.370674] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.395682] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.398554] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.450685] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.451639] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.452329] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.464670] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.467612] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.486256] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.497092] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.501569] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.503978] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.508538] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.512217] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.515584] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.517574] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.517574] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.517661] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.517661] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.520963] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.528670] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.530191] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.535094] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.538559] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.541290] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.541773] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.542497] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.543756] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.544509] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.544757] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.545565] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.547348] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.547698] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.548187] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.548684] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.549417] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.549685] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.550414] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.551688] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.552555] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.553323] iommu: Default domain type: Translated
[    0.554666] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.555473] SCSI subsystem initialized
[    0.555734] ACPI: bus type USB registered
[    0.556261] usbcore: registered new interface driver usbfs
[    0.556684] usbcore: registered new interface driver hub
[    0.557364] usbcore: registered new device driver usb
[    0.558708] pps_core: LinuxPPS API ver. 1 registered
[    0.559307] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.559678] PTP clock support registered
[    0.560996] Bluetooth: Core ver 2.22
[    0.561455] NET: Registered PF_BLUETOOTH protocol family
[    0.563669] Bluetooth: HCI device and connection manager initialized
[    0.564565] Bluetooth: HCI socket layer initialized
[    0.565670] Bluetooth: L2CAP socket layer initialized
[    0.566294] Bluetooth: SCO socket layer initialized
[    0.566765] PCI: Using ACPI for IRQ routing
[    0.611701] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.612264] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.612661] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.613675] vgaarb: loaded
[    0.614024] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.614425] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.630695] clocksource: Switched to clocksource kvm-clock
[    0.650704] pnp: PnP ACPI init
[    0.651418] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.652616] pnp: PnP ACPI: found 5 devices
[    0.664783] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.666460] NET: Registered PF_INET protocol family
[    0.667150] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.668488] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.669468] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.670351] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.671250] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.672126] TCP: Hash tables configured (established 8192 bind 8192)
[    0.672930] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.673697] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.674567] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.675963] RPC: Registered named UNIX socket transport module.
[    0.676657] RPC: Registered udp transport module.
[    0.677191] RPC: Registered tcp transport module.
[    0.677727] RPC: Registered tcp-with-tls transport module.
[    0.678403] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.679165] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.679829] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.680542] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.681315] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]
[    0.682114] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.682963] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.684396] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.687048] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.688926] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.690637] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.692234] PCI: CLS 0 bytes, default 64
[    0.693007] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.694181] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.699323] Initialise system trusted keyrings
[    0.700098] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.701533] NFS: Registering the id_resolver key type
[    0.702197] Key type id_resolver registered
[    0.702723] Key type id_legacy registered
[    0.703723] Key type cifs.idmap registered
[    0.725214] xor: automatically using best checksumming function   avx       
[    0.726222] Key type asymmetric registered
[    0.726734] Asymmetric key parser 'x509' registered
[    0.727391] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.728298] io scheduler mq-deadline registered
[    0.728855] io scheduler kyber registered
[    0.729370] io scheduler bfq registered
[    0.730285] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.732060] ACPI: button: Power Button [PWRF]
[    0.733794] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.736135] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.738284] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.743655] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.760698] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.761779] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.763094] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.783039] Linux agpgart interface v0.103
[    0.783750] ACPI: bus type drm_connector registered
[    0.784457] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.785151] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.788118] Console: switching to colour dummy device 80x25
[    0.788996] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.788998] [drm] features: -context_init
[    0.791619] [drm] number of scanouts: 1
[    0.792125] [drm] number of cap sets: 0
[    0.793061] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.797840] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.823740] Console: switching to colour frame buffer device 160x50
[    0.850888] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.855430] brd: module loaded
[    0.858352] loop: module loaded
[    0.859061] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.861329] virtio_blk virtio3: [vda] 736240 512-byte logical blocks (377 MB/359 MiB)
[    0.888820] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.889876] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.892664] scsi host0: ahci
[    0.893362] scsi host1: ahci
[    0.894068] scsi host2: ahci
[    0.894781] scsi host3: ahci
[    0.895519] scsi host4: ahci
[    0.896265] scsi host5: ahci
[    0.896747] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.897634] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.898485] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.899317] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.900199] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.901126] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.923223] e100: Intel(R) PRO/100 Network Driver
[    0.923766] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.924298] e1000: Intel(R) PRO/1000 Network Driver
[    0.924749] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.925287] e1000e: Intel(R) PRO/1000 Network Driver
[    0.925743] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.926293] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.926807] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.928523] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.929501] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.930305] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.931137] hub 1-0:1.0: USB hub found
[    0.931507] hub 1-0:1.0: 2 ports detected
[    0.932188] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.933240] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.934563] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.941996] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.943086] hub 2-0:1.0: USB hub found
[    0.943575] hub 2-0:1.0: 6 ports detected
[    0.966202] hub 1-0:1.0: USB hub found
[    0.967228] hub 1-0:1.0: 2 ports detected
[    0.968638] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.969339] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.970345] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.971437] hub 3-0:1.0: USB hub found
[    0.971974] hub 3-0:1.0: 2 ports detected
[    0.973613] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.974248] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.978798] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.979879] hub 4-0:1.0: USB hub found
[    0.980414] hub 4-0:1.0: 2 ports detected
[    0.981194] usbcore: registered new interface driver usb-storage
[    0.981978] usbcore: registered new interface driver usbserial_generic
[    0.982912] usbserial: USB Serial support registered for generic
[    0.983619] usbcore: registered new interface driver ftdi_sio
[    0.984414] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.985338] usbcore: registered new interface driver pl2303
[    0.985978] usbserial: USB Serial support registered for pl2303
[    0.986730] i8042: PNP: No PS/2 controller found.
[    0.987419] mousedev: PS/2 mouse device common for all mice
[    0.988269] rtc_cmos 00:03: RTC can wake from S4
[    0.989607] rtc_cmos 00:03: registered as rtc0
[    0.990227] rtc_cmos 00:03: setting system clock to 2023-10-05T00:26:15 UTC (1696465575)
[    0.991234] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.992542] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    0.992788] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.993752] intel_pstate: CPU model not supported
[    0.994441] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.995007] sdhci: Secure Digital Host Controller Interface driver
[    0.995696] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.996409] sdhci: Copyright(c) Pierre Ossman
[    0.998024] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.998922] usbcore: registered new interface driver usbhid
[    0.999660] usbhid: USB HID core driver
[    1.000151] u32 classifier
[    1.000465]     input device check on
[    1.000922]     Actions configured
[    1.001422] NET: Registered PF_INET6 protocol family
[    1.004192] Segment Routing with IPv6
[    1.005932] In-situ OAM (IOAM) with IPv6
[    1.006484] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.007440] NET: Registered PF_PACKET protocol family
[    1.008094] Bridge firewalling registered
[    1.008632] Key type dns_resolver registered
[    1.009320] NET: Registered PF_VSOCK protocol family
[    1.011031] IPI shorthand broadcast: enabled
[    1.014710] sched_clock: Marking stable (929006108, 84901340)->(1044755890, -30848442)
[    1.016001] registered taskstats version 1
[    1.016564] Loading compiled-in X.509 certificates
[    1.020179] Key type .fscrypt registered
[    1.020751] Key type fscrypt-provisioning registered
[    1.022017] Btrfs loaded, zoned=no, fsverity=no
[    1.023219] Key type encrypted registered
[    1.023928] printk: console [netcon0] enabled
[    1.024501] netconsole: network logging started
[    1.179952] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.208282] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.209375] ata1: SATA link down (SStatus 0 SControl 300)
[    1.210127] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.210834] ata3.00: applying bridge limits
[    1.211578] ata3.00: configured for UDMA/100
[    1.231978] ata4: SATA link down (SStatus 0 SControl 300)
[    1.232945] ata6: SATA link down (SStatus 0 SControl 300)
[    1.233821] ata5: SATA link down (SStatus 0 SControl 300)
[    1.234727] ata2: SATA link down (SStatus 0 SControl 300)
[    1.235845] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.238765] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.239648] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.240709] sr 2:0:0:0: [sr0] Hmm, seems the drive doesn't support multisession CD's
[    1.255987] IP-Config: Complete:
[    1.256934]      device=eth0, hwaddr=52:54:00:12:34:0e, ipaddr=192.168.7.14, mask=255.255.255.0, gw=192.168.7.13
[    1.258179]      host=192.168.7.14, domain=, nis-domain=(none)
[    1.258847]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.258851]      nameserver0=8.8.8.8
[    1.260288] clk: Disabling unused clocks
[    1.261313] md: Waiting for all devices to be available before autodetect
[    1.261933] md: If you don't use raid, use raid=noautodetect
[    1.262412] md: Autodetecting RAID arrays.
[    1.262785] md: autorun ...
[    1.263031] md: ... autorun DONE.
[    1.269273] EXT4-fs (vda): mounted filesystem 2193e7c3-bc31-4a5f-a8a1-0d071783bfdb r/w with ordered data mode. Quota mode: disabled.
[    1.270417] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.271114] devtmpfs: mounted
[    1.273095] Freeing unused kernel image (initmem) memory: 3376K
[    1.274931] Write protecting the kernel read-only data: 24576k
[    1.275971] Freeing unused kernel image (rodata/data gap) memory: 968K
[    1.276631] Run /sbin/init as init process
INIT: version 3.04 booting
[    1.316098] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.317943] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
Starting udev
[    1.357624] udevd[125]: starting version 3.2.12
[    1.365937] udevd[126]: starting eudev-3.2.12
[    1.433013] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.566985] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.620316] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.686272] EXT4-fs (vda): re-mounted 2193e7c3-bc31-4a5f-a8a1-0d071783bfdb r/w. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.2+snapshot-fc60772fa9e90bfb278d84f21c624df1fd812ed0 qemux86-64 /dev/ttyS0

qemux86-64 login: 