[    0.000000] Linux version 6.5.5-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20230926) #1 SMP PREEMPT_DYNAMIC Wed Oct  4 18:08:28 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.24::192.168.7.23:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000003] kvm-clock: using sched offset of 518459301 cycles
[    0.000006] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000010] tsc: Detected 2599.996 MHz processor
[    0.001783] last_pfn = 0x3ffd8 max_arch_pfn = 0x400000000
[    0.001815] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001820] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006802] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.006980] ACPI: Early table checksum verification disabled
[    0.006986] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS )
[    0.007009] ACPI: RSDT 0x000000003FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007018] ACPI: FACP 0x000000003FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007026] ACPI: DSDT 0x000000003FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007031] ACPI: FACS 0x000000003FFE0000 000040
[    0.007035] ACPI: APIC 0x000000003FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007040] ACPI: HPET 0x000000003FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007045] ACPI: MCFG 0x000000003FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007049] ACPI: WAET 0x000000003FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.007053] ACPI: Reserving FACP table memory at [mem 0x3ffe2217-0x3ffe230a]
[    0.007055] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2216]
[    0.007057] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]
[    0.007059] ACPI: Reserving APIC table memory at [mem 0x3ffe230b-0x3ffe239a]
[    0.007060] ACPI: Reserving HPET table memory at [mem 0x3ffe239b-0x3ffe23d2]
[    0.007062] ACPI: Reserving MCFG table memory at [mem 0x3ffe23d3-0x3ffe240e]
[    0.007063] ACPI: Reserving WAET table memory at [mem 0x3ffe240f-0x3ffe2436]
[    0.007131] Zone ranges:
[    0.007133]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.007136]   DMA32    [mem 0x0000000001000000-0x000000003ffd7fff]
[    0.007139]   Normal   empty
[    0.007140] Movable zone start for each node
[    0.007141] Early memory node ranges
[    0.007142]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.007144]   node   0: [mem 0x0000000000100000-0x000000003ffd7fff]
[    0.007146] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]
[    0.007630] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.007656] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.012364] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.012783] ACPI: PM-Timer IO Port: 0x608
[    0.012798] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.012845] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.012850] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.012853] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.012855] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.012857] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.012859] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.012864] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.012866] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.012872] TSC deadline timer available
[    0.012873] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.012899] [mem 0x40000000-0xafffffff] available for PCI devices
[    0.012901] Booting paravirtualized kernel on KVM
[    0.012904] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.012911] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.013643] percpu: Embedded 56 pages/cpu s189928 r8192 d31256 u524288
[    0.013685] Kernel command line: root=/dev/vda rw  ip=192.168.7.24::192.168.7.23:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.013773] random: crng init done
[    0.013927] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.014006] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.014085] Built 1 zonelists, mobility grouping on.  Total pages: 257752
[    0.014371] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.017812] Memory: 993356K/1048024K available (18432K kernel code, 2306K rwdata, 5176K rodata, 3376K init, 2336K bss, 54408K reserved, 0K cma-reserved)
[    0.017905] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.017919] Kernel/User page tables isolation: enabled
[    0.017959] ftrace: allocating 50643 entries in 198 pages
[    0.030404] ftrace: allocated 198 pages with 4 groups
[    0.030488] Dynamic Preempt: full
[    0.031006] rcu: Preemptible hierarchical RCU implementation.
[    0.031008] rcu: 	RCU event tracing is enabled.
[    0.031009] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.031011] 	All grace periods are expedited (rcu_expedited).
[    0.031012] 	Trampoline variant of Tasks RCU enabled.
[    0.031013] 	Rude variant of Tasks RCU enabled.
[    0.031014] 	Tracing variant of Tasks RCU enabled.
[    0.031015] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.031017] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.036779] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.037011] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.037118] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.042374] Console: colour VGA+ 80x25
[    0.042428] printk: console [ttyS0] enabled
[    0.126442] ACPI: Core revision 20230331
[    0.127146] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.128329] APIC: Switch to symmetric I/O mode setup
[    0.129129] x2apic enabled
[    0.129732] Switched APIC routing to physical x2apic.
[    0.131290] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.132290] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.133607] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.134755] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.135610] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.136059] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.136611] Spectre V2 : Mitigation: Retpolines
[    0.136936] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.137609] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.138168] Speculative Store Bypass: Vulnerable
[    0.138610] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.139174] MMIO Stale Data: Unknown: No mitigations
[    0.139610] SRBDS: Unknown: Dependent on hypervisor status
[    0.140064] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.140610] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.141610] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.142358] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.142610] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.173882] Freeing SMP alternatives memory: 52K
[    0.174599] pid_max: default: 32768 minimum: 301
[    0.174648] LSM: initializing lsm=capability,landlock,integrity
[    0.175620] landlock: Up and running.
[    0.176090] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.176614] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.178737] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.179848] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.180648] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.181602] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.181652] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.182636] signal: max sigframe size: 1776
[    0.183190] rcu: Hierarchical SRCU implementation.
[    0.183616] rcu: 	Max phase no-delay instances is 400.
[    0.184589] smp: Bringing up secondary CPUs ...
[    0.184793] smpboot: x86: Booting SMP configuration:
[    0.185399] .... node  #0, CPUs:      #1 #2 #3
[    0.186662] smp: Brought up 1 node, 4 CPUs
[    0.187624] smpboot: Max logical packages: 1
[    0.188090] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.189151] devtmpfs: initialized
[    0.189867] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.190616] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.191526] pinctrl core: initialized pinctrl subsystem
[    0.192857] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.193896] thermal_sys: Registered thermal governor 'step_wise'
[    0.193899] thermal_sys: Registered thermal governor 'user_space'
[    0.194636] cpuidle: using governor menu
[    0.195805] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.196615] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.197561] PCI: Using configuration type 1 for base access
[    0.197904] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.214680] raid6: sse2x4   gen() 13094 MB/s
[    0.231678] raid6: sse2x2   gen() 11752 MB/s
[    0.248719] raid6: sse2x1   gen()  7274 MB/s
[    0.249178] raid6: using algorithm sse2x4 gen() 13094 MB/s
[    0.267027] raid6: .... xor() 6583 MB/s, rmw enabled
[    0.267612] raid6: using ssse3x2 recovery algorithm
[    0.268427] ACPI: Added _OSI(Module Device)
[    0.270613] ACPI: Added _OSI(Processor Device)
[    0.271295] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.271612] ACPI: Added _OSI(Processor Aggregator Device)
[    0.274189] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.277857] ACPI: Interpreter enabled
[    0.277857] ACPI: PM: (supports S0 S3 S5)
[    0.278125] ACPI: Using IOAPIC for interrupt routing
[    0.279655] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.280612] PCI: Using E820 reservations for host bridge windows
[    0.281570] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.284961] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.285618] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.286679] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.287500] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.288748] PCI host bridge to bus 0000:00
[    0.289363] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.289613] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.290431] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.291612] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]
[    0.292494] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.293613] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.294614] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.295393] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.296170] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.299613] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.304613] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.312617] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.316617] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.318369] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.321541] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.323618] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.333535] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.336357] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.365614] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.369625] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.384632] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.407642] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.408546] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.410248] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.466624] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.469614] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.505560] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.554034] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.559614] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.561791] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.566196] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.568156] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.572599] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.576181] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.577237] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.581880] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.582998] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.583918] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.593177] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.594613] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.600001] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.603502] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.610727] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.611620] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.612448] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.612709] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.613424] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.613700] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.614389] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.615705] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.616424] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.617637] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.618348] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.619629] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.620355] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.620629] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.621340] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.622629] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.623940] iommu: Default domain type: Translated
[    0.624544] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.624718] SCSI subsystem initialized
[    0.625696] ACPI: bus type USB registered
[    0.626639] usbcore: registered new interface driver usbfs
[    0.627305] usbcore: registered new interface driver hub
[    0.627626] usbcore: registered new device driver usb
[    0.628247] pps_core: LinuxPPS API ver. 1 registered
[    0.628612] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.629622] PTP clock support registered
[    0.630705] Bluetooth: Core ver 2.22
[    0.631158] NET: Registered PF_BLUETOOTH protocol family
[    0.631612] Bluetooth: HCI device and connection manager initialized
[    0.632351] Bluetooth: HCI socket layer initialized
[    0.633619] Bluetooth: L2CAP socket layer initialized
[    0.634208] Bluetooth: SCO socket layer initialized
[    0.634683] PCI: Using ACPI for IRQ routing
[    0.683662] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.684454] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.684606] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.685618] vgaarb: loaded
[    0.686044] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.686611] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.692727] clocksource: Switched to clocksource kvm-clock
[    0.713413] pnp: PnP ACPI init
[    0.714264] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.715521] pnp: PnP ACPI: found 5 devices
[    0.724899] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.726048] NET: Registered PF_INET protocol family
[    0.727206] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.728557] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.729646] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.730561] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.731482] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.732429] TCP: Hash tables configured (established 8192 bind 8192)
[    0.733261] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.734063] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.734974] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.736056] RPC: Registered named UNIX socket transport module.
[    0.736931] RPC: Registered udp transport module.
[    0.737463] RPC: Registered tcp transport module.
[    0.738016] RPC: Registered tcp-with-tls transport module.
[    0.738647] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.739387] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.740127] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.740857] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.742875] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]
[    0.743704] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.744511] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.745806] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.747659] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.749363] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.751069] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.752745] PCI: CLS 0 bytes, default 64
[    0.753502] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.754560] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.757026] Initialise system trusted keyrings
[    0.757725] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.759097] NFS: Registering the id_resolver key type
[    0.759751] Key type id_resolver registered
[    0.760253] Key type id_legacy registered
[    0.761223] Key type cifs.idmap registered
[    0.782776] xor: automatically using best checksumming function   avx       
[    0.783774] Key type asymmetric registered
[    0.784307] Asymmetric key parser 'x509' registered
[    0.784965] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.785871] io scheduler mq-deadline registered
[    0.786390] io scheduler kyber registered
[    0.786914] io scheduler bfq registered
[    0.787800] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.789736] ACPI: button: Power Button [PWRF]
[    0.790952] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.792911] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.794770] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.799879] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.826119] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.827196] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.828445] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.837258] Linux agpgart interface v0.103
[    0.838030] ACPI: bus type drm_connector registered
[    0.838870] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.839660] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.842771] Console: switching to colour dummy device 80x25
[    0.843709] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.843713] [drm] features: -context_init
[    0.845843] [drm] number of scanouts: 1
[    0.846364] [drm] number of cap sets: 0
[    0.847386] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.852187] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.885959] Console: switching to colour frame buffer device 160x50
[    0.900562] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.905693] brd: module loaded
[    0.909479] loop: module loaded
[    0.910250] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.912726] virtio_blk virtio3: [vda] 730632 512-byte logical blocks (374 MB/357 MiB)
[    0.941811] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.942818] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.945455] scsi host0: ahci
[    0.946234] scsi host1: ahci
[    0.946930] scsi host2: ahci
[    0.947675] scsi host3: ahci
[    0.948348] scsi host4: ahci
[    0.949102] scsi host5: ahci
[    0.949645] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.950631] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.951712] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.952539] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.953412] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.954303] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.971817] e100: Intel(R) PRO/100 Network Driver
[    0.972541] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.973245] e1000: Intel(R) PRO/1000 Network Driver
[    0.973836] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.974535] e1000e: Intel(R) PRO/1000 Network Driver
[    0.975101] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.975824] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.976483] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.978177] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.979440] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.980499] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.982501] hub 1-0:1.0: USB hub found
[    0.983022] hub 1-0:1.0: 2 ports detected
[    0.983923] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.985221] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.999951] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    1.007716] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.008791] hub 2-0:1.0: USB hub found
[    1.009268] hub 2-0:1.0: 6 ports detected
[    1.031749] hub 1-0:1.0: USB hub found
[    1.032285] hub 1-0:1.0: 2 ports detected
[    1.033039] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.033819] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.034909] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    1.035968] hub 3-0:1.0: USB hub found
[    1.036447] hub 3-0:1.0: 2 ports detected
[    1.038022] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.038714] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.039815] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    1.040809] hub 4-0:1.0: USB hub found
[    1.041316] hub 4-0:1.0: 2 ports detected
[    1.042075] usbcore: registered new interface driver usb-storage
[    1.042901] usbcore: registered new interface driver usbserial_generic
[    1.043770] usbserial: USB Serial support registered for generic
[    1.044535] usbcore: registered new interface driver ftdi_sio
[    1.045363] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.046285] usbcore: registered new interface driver pl2303
[    1.046928] usbserial: USB Serial support registered for pl2303
[    1.047656] i8042: PNP: No PS/2 controller found.
[    1.048328] mousedev: PS/2 mouse device common for all mice
[    1.049259] rtc_cmos 00:03: RTC can wake from S4
[    1.050657] rtc_cmos 00:03: registered as rtc0
[    1.051316] rtc_cmos 00:03: setting system clock to 2023-10-05T00:25:56 UTC (1696465556)
[    1.052395] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    1.053970] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.054151] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    1.054823] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    1.055868] intel_pstate: CPU model not supported
[    1.056407] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    1.057064] sdhci: Secure Digital Host Controller Interface driver
[    1.058697] sdhci: Copyright(c) Pierre Ossman
[    1.059287] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.060096] usbcore: registered new interface driver usbhid
[    1.060758] usbhid: USB HID core driver
[    1.061283] u32 classifier
[    1.061614]     input device check on
[    1.062035]     Actions configured
[    1.062545] NET: Registered PF_INET6 protocol family
[    1.063958] Segment Routing with IPv6
[    1.064608] In-situ OAM (IOAM) with IPv6
[    1.065102] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.066529] NET: Registered PF_PACKET protocol family
[    1.067216] Bridge firewalling registered
[    1.067764] Key type dns_resolver registered
[    1.068376] NET: Registered PF_VSOCK protocol family
[    1.069609] IPI shorthand broadcast: enabled
[    1.072991] sched_clock: Marking stable (980015760, 92584798)->(1090979867, -18379309)
[    1.074258] registered taskstats version 1
[    1.074906] Loading compiled-in X.509 certificates
[    1.078425] Key type .fscrypt registered
[    1.079018] Key type fscrypt-provisioning registered
[    1.080193] Btrfs loaded, zoned=no, fsverity=no
[    1.081531] Key type encrypted registered
[    1.082234] printk: console [netcon0] enabled
[    1.082848] netconsole: network logging started
[    1.252636] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.265835] ata2: SATA link down (SStatus 0 SControl 300)
[    1.281128] ata6: SATA link down (SStatus 0 SControl 300)
[    1.289822] ata1: SATA link down (SStatus 0 SControl 300)
[    1.290755] ata5: SATA link down (SStatus 0 SControl 300)
[    1.291581] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.292502] ata4: SATA link down (SStatus 0 SControl 300)
[    1.293210] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.293927] ata3.00: applying bridge limits
[    1.294511] ata3.00: configured for UDMA/100
[    1.295555] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.298145] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.299019] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.300199] sr 2:0:0:0: [sr0] Hmm, seems the drive doesn't support multisession CD's
[    1.315619] IP-Config: Complete:
[    1.316090]      device=eth0, hwaddr=52:54:00:12:34:18, ipaddr=192.168.7.24, mask=255.255.255.0, gw=192.168.7.23
[    1.317239]      host=192.168.7.24, domain=, nis-domain=(none)
[    1.318118]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.318124]      nameserver0=8.8.8.8
[    1.320126] clk: Disabling unused clocks
[    1.321171] md: Waiting for all devices to be available before autodetect
[    1.321740] md: If you don't use raid, use raid=noautodetect
[    1.322187] md: Autodetecting RAID arrays.
[    1.322487] md: autorun ...
[    1.322710] md: ... autorun DONE.
[    1.330779] EXT4-fs (vda): mounted filesystem 40af8ab5-4a82-4c48-aca7-2e1b1725d6ed r/w with ordered data mode. Quota mode: disabled.
[    1.332014] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.332754] devtmpfs: mounted
[    1.334912] Freeing unused kernel image (initmem) memory: 3376K
[    1.338670] Write protecting the kernel read-only data: 24576k
[    1.339734] Freeing unused kernel image (rodata/data gap) memory: 968K
[    1.340368] Run /sbin/init as init process
INIT: version 3.04 booting
[    1.403619] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.404715] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
Starting udev
[    1.435856] udevd[124]: starting version 3.2.12
[    1.443364] udevd[125]: starting eudev-3.2.12
[    1.520626] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.659555] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.711981] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.777445] EXT4-fs (vda): re-mounted 40af8ab5-4a82-4c48-aca7-2e1b1725d6ed r/w. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.2+snapshot-fc60772fa9e90bfb278d84f21c624df1fd812ed0 qemux86-64 /dev/ttyS0

qemux86-64 login: 