[    0.000000] Linux version 6.5.5-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20230926) #1 SMP PREEMPT_DYNAMIC Wed Oct  4 18:08:28 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000002] kvm-clock: using sched offset of 632875335 cycles
[    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000009] tsc: Detected 2599.996 MHz processor
[    0.001603] last_pfn = 0x3ffd8 max_arch_pfn = 0x400000000
[    0.001632] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001636] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006658] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.006829] ACPI: Early table checksum verification disabled
[    0.006834] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS )
[    0.006851] ACPI: RSDT 0x000000003FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006858] ACPI: FACP 0x000000003FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006866] ACPI: DSDT 0x000000003FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006872] ACPI: FACS 0x000000003FFE0000 000040
[    0.006876] ACPI: APIC 0x000000003FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006880] ACPI: HPET 0x000000003FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006885] ACPI: MCFG 0x000000003FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006889] ACPI: WAET 0x000000003FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006893] ACPI: Reserving FACP table memory at [mem 0x3ffe2217-0x3ffe230a]
[    0.006895] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2216]
[    0.006897] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]
[    0.006898] ACPI: Reserving APIC table memory at [mem 0x3ffe230b-0x3ffe239a]
[    0.006900] ACPI: Reserving HPET table memory at [mem 0x3ffe239b-0x3ffe23d2]
[    0.006901] ACPI: Reserving MCFG table memory at [mem 0x3ffe23d3-0x3ffe240e]
[    0.006903] ACPI: Reserving WAET table memory at [mem 0x3ffe240f-0x3ffe2436]
[    0.006968] Zone ranges:
[    0.006970]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006973]   DMA32    [mem 0x0000000001000000-0x000000003ffd7fff]
[    0.006976]   Normal   empty
[    0.006977] Movable zone start for each node
[    0.006978] Early memory node ranges
[    0.006979]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.006981]   node   0: [mem 0x0000000000100000-0x000000003ffd7fff]
[    0.006984] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]
[    0.006995] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.007037] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.011865] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.012300] ACPI: PM-Timer IO Port: 0x608
[    0.012313] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.012346] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.012351] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.012354] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.012356] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.012357] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.012359] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.012364] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.012366] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.012371] TSC deadline timer available
[    0.012373] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.012399] [mem 0x40000000-0xafffffff] available for PCI devices
[    0.012401] Booting paravirtualized kernel on KVM
[    0.012404] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.012410] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.013140] percpu: Embedded 56 pages/cpu s189928 r8192 d31256 u524288
[    0.013184] Kernel command line: root=/dev/vda rw  ip=192.168.7.18::192.168.7.17:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.013274] random: crng init done
[    0.013501] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.013620] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.013708] Built 1 zonelists, mobility grouping on.  Total pages: 257752
[    0.014346] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.017687] Memory: 993360K/1048024K available (18432K kernel code, 2306K rwdata, 5176K rodata, 3376K init, 2336K bss, 54404K reserved, 0K cma-reserved)
[    0.017767] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.017779] Kernel/User page tables isolation: enabled
[    0.017817] ftrace: allocating 50643 entries in 198 pages
[    0.030553] ftrace: allocated 198 pages with 4 groups
[    0.030641] Dynamic Preempt: full
[    0.031157] rcu: Preemptible hierarchical RCU implementation.
[    0.031158] rcu: 	RCU event tracing is enabled.
[    0.031159] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.031161] 	All grace periods are expedited (rcu_expedited).
[    0.031162] 	Trampoline variant of Tasks RCU enabled.
[    0.031163] 	Rude variant of Tasks RCU enabled.
[    0.031164] 	Tracing variant of Tasks RCU enabled.
[    0.031166] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.031167] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.036857] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.037096] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.037206] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.043456] Console: colour VGA+ 80x25
[    0.043506] printk: console [ttyS0] enabled
[    0.125113] ACPI: Core revision 20230331
[    0.125799] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.127043] APIC: Switch to symmetric I/O mode setup
[    0.127828] x2apic enabled
[    0.128549] Switched APIC routing to physical x2apic.
[    0.130142] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.130917] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.134137] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.135292] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.136139] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.136891] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.137142] Spectre V2 : Mitigation: Retpolines
[    0.137701] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.138140] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.138985] Speculative Store Bypass: Vulnerable
[    0.139141] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.140139] MMIO Stale Data: Unknown: No mitigations
[    0.141140] SRBDS: Unknown: Dependent on hypervisor status
[    0.142155] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.143139] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.144140] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.145140] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.146139] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.177700] Freeing SMP alternatives memory: 52K
[    0.178143] pid_max: default: 32768 minimum: 301
[    0.179187] LSM: initializing lsm=capability,landlock,integrity
[    0.180151] landlock: Up and running.
[    0.180658] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.181144] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.183325] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.184433] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.185181] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.186178] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.187192] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.188176] signal: max sigframe size: 1776
[    0.188745] rcu: Hierarchical SRCU implementation.
[    0.189142] rcu: 	Max phase no-delay instances is 400.
[    0.190543] smp: Bringing up secondary CPUs ...
[    0.191365] smpboot: x86: Booting SMP configuration:
[    0.191985] .... node  #0, CPUs:      #1 #2 #3
[    0.193167] smp: Brought up 1 node, 4 CPUs
[    0.194156] smpboot: Max logical packages: 1
[    0.194690] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.196141] devtmpfs: initialized
[    0.196949] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.197147] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.198078] pinctrl core: initialized pinctrl subsystem
[    0.199574] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.200535] thermal_sys: Registered thermal governor 'step_wise'
[    0.200539] thermal_sys: Registered thermal governor 'user_space'
[    0.201172] cpuidle: using governor menu
[    0.202393] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.203145] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.203928] PCI: Using configuration type 1 for base access
[    0.204389] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.221420] raid6: sse2x4   gen()  7965 MB/s
[    0.239142] raid6: sse2x2   gen()  7708 MB/s
[    0.256168] raid6: sse2x1   gen()  6082 MB/s
[    0.256842] raid6: using algorithm sse2x4 gen() 7965 MB/s
[    0.274844] raid6: .... xor() 4522 MB/s, rmw enabled
[    0.275142] raid6: using ssse3x2 recovery algorithm
[    0.275923] ACPI: Added _OSI(Module Device)
[    0.276141] ACPI: Added _OSI(Processor Device)
[    0.276640] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.278141] ACPI: Added _OSI(Processor Aggregator Device)
[    0.280699] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.283395] ACPI: Interpreter enabled
[    0.283936] ACPI: PM: (supports S0 S3 S5)
[    0.284143] ACPI: Using IOAPIC for interrupt routing
[    0.284802] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.286142] PCI: Using E820 reservations for host bridge windows
[    0.287038] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.289983] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.291153] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.292263] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.293250] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.294316] PCI host bridge to bus 0000:00
[    0.294819] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.296141] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.296965] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.298142] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]
[    0.299050] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.300142] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.301075] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.301238] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.302639] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.307144] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.310058] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.315985] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.318140] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.319163] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.322016] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.324145] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.332146] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.338367] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.363155] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.372154] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.375135] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.414159] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.415259] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.417867] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.420146] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.423096] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.479116] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.483026] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.486637] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.488109] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.490751] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.492276] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.495694] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.498174] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.499143] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.502376] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.503381] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.505466] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.513144] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.515675] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.517581] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.522937] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.525734] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.526255] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.527076] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.528242] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.529030] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.529259] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.530107] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.531766] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.532183] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.532876] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.534160] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.534967] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.535158] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.535860] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.536157] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.536812] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.539756] iommu: Default domain type: Translated
[    0.540141] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.540986] SCSI subsystem initialized
[    0.542184] ACPI: bus type USB registered
[    0.542731] usbcore: registered new interface driver usbfs
[    0.543157] usbcore: registered new interface driver hub
[    0.543832] usbcore: registered new device driver usb
[    0.544180] pps_core: LinuxPPS API ver. 1 registered
[    0.544773] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.546154] PTP clock support registered
[    0.547341] Bluetooth: Core ver 2.22
[    0.547799] NET: Registered PF_BLUETOOTH protocol family
[    0.548141] Bluetooth: HCI device and connection manager initialized
[    0.548884] Bluetooth: HCI socket layer initialized
[    0.549143] Bluetooth: L2CAP socket layer initialized
[    0.549752] Bluetooth: SCO socket layer initialized
[    0.551199] PCI: Using ACPI for IRQ routing
[    0.600964] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.600964] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.601135] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.603150] vgaarb: loaded
[    0.603643] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.604141] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.610259] clocksource: Switched to clocksource kvm-clock
[    0.630607] pnp: PnP ACPI init
[    0.631638] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.633276] pnp: PnP ACPI: found 5 devices
[    0.645230] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.646401] NET: Registered PF_INET protocol family
[    0.647110] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.648457] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.649497] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.650542] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.651468] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.652344] TCP: Hash tables configured (established 8192 bind 8192)
[    0.653138] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.653912] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.654792] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.662919] RPC: Registered named UNIX socket transport module.
[    0.663643] RPC: Registered udp transport module.
[    0.664133] RPC: Registered tcp transport module.
[    0.664626] RPC: Registered tcp-with-tls transport module.
[    0.665220] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.665899] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.666615] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.667258] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.667957] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]
[    0.668679] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.669375] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.670576] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.671880] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.672979] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.674419] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.675579] PCI: CLS 0 bytes, default 64
[    0.676200] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.676846] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.678990] Initialise system trusted keyrings
[    0.679810] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.681371] NFS: Registering the id_resolver key type
[    0.681978] Key type id_resolver registered
[    0.682441] Key type id_legacy registered
[    0.683415] Key type cifs.idmap registered
[    0.705524] xor: automatically using best checksumming function   avx       
[    0.706497] Key type asymmetric registered
[    0.706979] Asymmetric key parser 'x509' registered
[    0.707591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.708462] io scheduler mq-deadline registered
[    0.708972] io scheduler kyber registered
[    0.709584] io scheduler bfq registered
[    0.711399] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.713191] ACPI: button: Power Button [PWRF]
[    0.714616] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.716944] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.719181] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.725814] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.742979] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.743988] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.745155] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.747804] Linux agpgart interface v0.103
[    0.748528] ACPI: bus type drm_connector registered
[    0.749303] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.750068] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.754571] Console: switching to colour dummy device 80x25
[    0.755581] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.755586] [drm] features: -context_init
[    0.757601] [drm] number of scanouts: 1
[    0.758106] [drm] number of cap sets: 0
[    0.759091] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.763729] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.788941] Console: switching to colour frame buffer device 160x50
[    0.814685] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.819237] brd: module loaded
[    0.822274] loop: module loaded
[    0.822927] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.824891] virtio_blk virtio3: [vda] 739616 512-byte logical blocks (379 MB/361 MiB)
[    0.841345] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.842367] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.844885] scsi host0: ahci
[    0.845528] scsi host1: ahci
[    0.849219] scsi host2: ahci
[    0.850123] scsi host3: ahci
[    0.850803] scsi host4: ahci
[    0.851451] scsi host5: ahci
[    0.851846] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.852592] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.853314] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.854056] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.854844] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.855631] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.878787] e100: Intel(R) PRO/100 Network Driver
[    0.879448] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.880164] e1000: Intel(R) PRO/1000 Network Driver
[    0.880718] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.881399] e1000e: Intel(R) PRO/1000 Network Driver
[    0.881993] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.882776] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.883398] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.885469] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.886561] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.887574] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.888601] hub 1-0:1.0: USB hub found
[    0.889116] hub 1-0:1.0: 2 ports detected
[    0.889995] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.891264] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.892297] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.899131] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.900216] hub 2-0:1.0: USB hub found
[    0.900685] hub 2-0:1.0: 6 ports detected
[    0.923212] hub 1-0:1.0: USB hub found
[    0.923808] hub 1-0:1.0: 2 ports detected
[    0.924552] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.925296] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.926436] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.927560] hub 3-0:1.0: USB hub found
[    0.928079] hub 3-0:1.0: 2 ports detected
[    0.929796] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.930535] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.931697] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.932756] hub 4-0:1.0: USB hub found
[    0.933245] hub 4-0:1.0: 2 ports detected
[    0.934013] usbcore: registered new interface driver usb-storage
[    0.934856] usbcore: registered new interface driver usbserial_generic
[    0.935692] usbserial: USB Serial support registered for generic
[    0.936576] usbcore: registered new interface driver ftdi_sio
[    0.937289] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.938271] usbcore: registered new interface driver pl2303
[    0.938967] usbserial: USB Serial support registered for pl2303
[    0.939701] i8042: PNP: No PS/2 controller found.
[    0.940464] mousedev: PS/2 mouse device common for all mice
[    0.941427] rtc_cmos 00:03: RTC can wake from S4
[    0.942644] rtc_cmos 00:03: registered as rtc0
[    0.943293] rtc_cmos 00:03: setting system clock to 2023-10-05T00:25:51 UTC (1696465551)
[    0.944351] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.945869] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.946994] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.947686] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.948925] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    0.950191] intel_pstate: CPU model not supported
[    0.950833] sdhci: Secure Digital Host Controller Interface driver
[    0.951580] sdhci: Copyright(c) Pierre Ossman
[    0.955967] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.956963] usbcore: registered new interface driver usbhid
[    0.957759] usbhid: USB HID core driver
[    0.958336] u32 classifier
[    0.958721]     input device check on
[    0.959189]     Actions configured
[    0.959660] NET: Registered PF_INET6 protocol family
[    0.961028] Segment Routing with IPv6
[    0.961511] In-situ OAM (IOAM) with IPv6
[    0.962065] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.962950] NET: Registered PF_PACKET protocol family
[    0.963605] Bridge firewalling registered
[    0.964138] Key type dns_resolver registered
[    0.964764] NET: Registered PF_VSOCK protocol family
[    0.965994] IPI shorthand broadcast: enabled
[    0.969933] sched_clock: Marking stable (876007527, 93030566)->(995212444, -26174351)
[    0.971162] registered taskstats version 1
[    0.971733] Loading compiled-in X.509 certificates
[    0.975350] Key type .fscrypt registered
[    0.975866] Key type fscrypt-provisioning registered
[    0.977025] Btrfs loaded, zoned=no, fsverity=no
[    0.978347] Key type encrypted registered
[    0.979061] printk: console [netcon0] enabled
[    0.979645] netconsole: network logging started
[    1.140084] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.184897] ata2: SATA link down (SStatus 0 SControl 300)
[    1.187090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.188148] ata5: SATA link down (SStatus 0 SControl 300)
[    1.188966] ata6: SATA link down (SStatus 0 SControl 300)
[    1.189726] ata1: SATA link down (SStatus 0 SControl 300)
[    1.190411] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.191124] ata3.00: applying bridge limits
[    1.191876] ata4: SATA link down (SStatus 0 SControl 300)
[    1.192703] ata3.00: configured for UDMA/100
[    1.197429] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.199969] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.200825] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.201832] sr 2:0:0:0: [sr0] Hmm, seems the drive doesn't support multisession CD's
[    1.221091] IP-Config: Complete:
[    1.221412]      device=eth0, hwaddr=52:54:00:12:34:12, ipaddr=192.168.7.18, mask=255.255.255.0, gw=192.168.7.17
[    1.222501]      host=192.168.7.18, domain=, nis-domain=(none)
[    1.223173]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.223177]      nameserver0=8.8.8.8
[    1.224594] clk: Disabling unused clocks
[    1.225465] md: Waiting for all devices to be available before autodetect
[    1.226019] md: If you don't use raid, use raid=noautodetect
[    1.226598] md: Autodetecting RAID arrays.
[    1.226931] md: autorun ...
[    1.227156] md: ... autorun DONE.
[    1.234933] EXT4-fs (vda): mounted filesystem 45b866fe-1a92-4201-b312-432726d58a6a r/w with ordered data mode. Quota mode: disabled.
[    1.235971] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.236763] devtmpfs: mounted
[    1.238371] Freeing unused kernel image (initmem) memory: 3376K
[    1.241054] Write protecting the kernel read-only data: 24576k
[    1.241939] Freeing unused kernel image (rodata/data gap) memory: 968K
[    1.242618] Run /sbin/init as init process
INIT: version 3.04 booting
[    1.280926] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.282070] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
Starting udev
[    1.323121] udevd[127]: starting version 3.2.12
[    1.330930] udevd[128]: starting eudev-3.2.12
[    1.398124] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.535346] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.588663] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.652655] EXT4-fs (vda): re-mounted 45b866fe-1a92-4201-b312-432726d58a6a r/w. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.2+snapshot-fc60772fa9e90bfb278d84f21c624df1fd812ed0 qemux86-64 /dev/ttyS0

qemux86-64 login: 