[    0.000000] Linux version 6.1.51-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.3.0, GNU ld (GNU Binutils) 2.40.0.20230703) #1 SMP PREEMPT Mon Sep  4 17:54:38 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239100K/262140K available (13617K kernel code, 1444K rwdata, 3552K rodata, 384K init, 403K bss, 23040K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.29 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11469209409 ns
[    0.000208] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12886752252ns
[    0.012115] Console: colour dummy device 80x25
[    0.012935] printk: console [tty0] enabled
[    0.013614] printk: bootconsole [uart8250] disabled
[    0.000000] Linux version 6.1.51-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 12.3.0, GNU ld (GNU Binutils) 2.40.0.20230703) #1 SMP PREEMPT Mon Sep  4 17:54:38 UTC 2023
[    0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] CPU0 revision is: 00019500 (MIPS 34Kc)
[    0.000000] FPU revision is: 00739500
[    0.000000] MIPS: machine is mti,malta
[    0.000000] Software DMA cache coherency enabled
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes.
[    0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000000000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x000000000fffefff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff]
[    0.000000] random: crng init done
[    0.000000] percpu: Embedded 16 pages/cpu s35936 r8192 d21408 u65536
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 64959
[    0.000000] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.000000] Memory: 239100K/262140K available (13617K kernel code, 1444K rwdata, 3552K rodata, 384K init, 403K bss, 23040K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS: 256
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] CPU frequency 333.29 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11469209409 ns
[    0.000208] sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12886752252ns
[    0.012115] Console: colour dummy device 80x25
[    0.012935] printk: console [tty0] enabled
[    0.013614] printk: bootconsole [uart8250] disabled
[    0.015531] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[    0.052591] pid_max: default: 32768 minimum: 301
[    0.053737] LSM: Security Framework initializing
[    0.054902] landlock: Up and running.
[    0.058357] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.058532] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.142871] cblist_init_generic: Setting adjustable number of callback queues.
[    0.143184] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.143972] cblist_init_generic: Setting adjustable number of callback queues.
[    0.144061] cblist_init_generic: Setting shift to 0 and lim to 1.
[    0.145907] Performance counters: No available PMU.
[    0.148019] rcu: Hierarchical SRCU implementation.
[    0.148158] rcu: 	Max phase no-delay instances is 1000.
[    0.161028] smp: Bringing up secondary CPUs ...
[    0.161411] smp: Brought up 1 node, 1 CPU
[    0.188364] devtmpfs: initialized
[    0.206205] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.206841] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.225727] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.720792] raid6: int32x8  gen()   219 MB/s
[    1.069635] raid6: int32x4  gen()   270 MB/s
[    1.418513] raid6: int32x2  gen()   379 MB/s
[    1.769019] raid6: int32x1  gen()   299 MB/s
[    1.769342] raid6: using algorithm int32x2 gen() 379 MB/s
[    2.041747] raid6: .... xor() 193 MB/s, rmw enabled
[    2.042081] raid6: using intx1 recovery algorithm
[    2.048908] SCSI subsystem initialized
[    2.050547] usbcore: registered new interface driver usbfs
[    2.051344] usbcore: registered new interface driver hub
[    2.051866] usbcore: registered new device driver usb
[    2.052904] pps_core: LinuxPPS API ver. 1 registered
[    2.053037] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.053395] PTP clock support registered
[    2.087434] PCI host bridge to bus 0000:00
[    2.088891] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff]
[    2.090015] pci_bus 0000:00: root bus resource [io  0x1000-0x1fffff]
[    2.090369] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    2.093409] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000
[    2.095007] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size)
[    2.095216] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size)
[    2.095382] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size)
[    2.095541] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size)
[    2.095732] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size)
[    2.100924] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100
[    2.102562] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180
[    2.103127] pci 0000:00:0a.1: reg 0x20: [io  0x0000-0x000f]
[    2.103407] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    2.103584] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    2.103788] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    2.103957] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    2.105080] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300
[    2.105324] pci 0000:00:0a.2: reg 0x20: [io  0x0000-0x001f]
[    2.106642] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000
[    2.107641] pci 0000:00:0a.3: quirk: [io  0x1000-0x103f] claimed by PIIX4 ACPI
[    2.107951] pci 0000:00:0a.3: quirk: [io  0x1100-0x110f] claimed by PIIX4 SMB
[    2.109655] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000
[    2.109863] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref]
[    2.110161] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff]
[    2.110345] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    2.111550] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000
[    2.111790] pci 0000:00:13.0: reg 0x10: [io  0x0000-0x001f]
[    2.112136] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.112422] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
[    2.113351] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00
[    2.113559] pci 0000:00:14.0: reg 0x10: [io  0x0000-0x001f]
[    2.113757] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.114640] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000
[    2.114849] pci 0000:00:15.0: reg 0x10: [io  0x0000-0x007f]
[    2.115051] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[    2.116530] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    2.119537] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref]
[    2.120241] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref]
[    2.120521] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref]
[    2.120750] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref]
[    2.121090] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref]
[    2.121299] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref]
[    2.121544] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff]
[    2.121779] pci 0000:00:15.0: BAR 0: assigned [io  0x1080-0x10ff]
[    2.121979] pci 0000:00:0a.2: BAR 4: assigned [io  0x1040-0x105f]
[    2.122120] pci 0000:00:13.0: BAR 0: assigned [io  0x1060-0x107f]
[    2.122276] pci 0000:00:14.0: BAR 0: assigned [io  0x1400-0x141f]
[    2.122425] pci 0000:00:0a.1: BAR 4: assigned [io  0x1420-0x142f]
[    2.126596] pci 0000:00:12.0: vgaarb: setting as boot VGA device
[    2.126911] pci 0000:00:12.0: vgaarb: bridge control possible
[    2.127128] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[    2.127374] vgaarb: loaded
[    2.132007] clocksource: Switched to clocksource MIPS
[    2.662583] NET: Registered PF_INET protocol family
[    2.664035] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    2.674632] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.674868] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.675038] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    2.675300] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
[    2.675524] TCP: Hash tables configured (established 2048 bind 2048)
[    2.676958] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.677274] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    2.679278] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.801924] RPC: Registered named UNIX socket transport module.
[    2.802120] RPC: Registered udp transport module.
[    2.802186] RPC: Registered tcp transport module.
[    2.802244] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.803120] pci 0000:00:0a.2: enabling device (0000 -> 0001)
[    2.804070] PCI: CLS 0 bytes, default 16
[    2.814308] workingset: timestamp_bits=14 max_order=16 bucket_order=2
[    2.836352] NFS: Registering the id_resolver key type
[    2.837743] Key type id_resolver registered
[    2.837851] Key type id_legacy registered
[    2.841209] Key type cifs.idmap registered
[    3.023306] xor: measuring software checksum speed
[    3.045437]    8regs           :   493 MB/sec
[    3.061264]    8regs_prefetch  :   790 MB/sec
[    3.073843]    32regs          :   821 MB/sec
[    3.092515]    32regs_prefetch :   541 MB/sec
[    3.092692] xor: using function: 32regs (821 MB/sec)
[    3.093649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    3.094070] io scheduler mq-deadline registered
[    3.094318] io scheduler kyber registered
[    3.104327] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003)
[    3.108321] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003)
[    3.109747] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003)
[    3.116934] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    3.124348] printk: console [ttyS0] disabled
[    3.150292] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.150475] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800
[    3.178752] printk: console [ttyS0] enabled
[    3.202009] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    3.202411] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800
[    3.203172] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28
[    3.213687] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002)
[    3.214997] [drm] Found bochs VGA, ID 0xb0c5.
[    3.215305] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000.
[    3.220846] [drm] Found EDID data blob.
[    3.230826] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0
[    3.316942] Console: switching to colour frame buffer device 160x50
[    3.377901] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device
[    3.448010] brd: module loaded
[    3.449324] virtio_blk virtio2: 1/0/0 default/read/poll queues
[    3.459221] virtio_blk virtio2: [vda] 1162236 512-byte logical blocks (595 MB/567 MiB)
[    3.489319] uhci_hcd 0000:00:0a.2: UHCI Host Controller
[    3.491659] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[    3.493338] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040
[    3.505723] hub 1-0:1.0: USB hub found
[    3.507153] hub 1-0:1.0: 2 ports detected
[    3.553037] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.555685] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.569416] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    3.575494] usbcore: registered new interface driver usbhid
[    3.579604] usbhid: USB HID core driver
[    3.580747] u32 classifier
[    3.581676]     input device check on
[    3.581951]     Actions configured
[    3.585812] NET: Registered PF_INET6 protocol family
[    3.596330] Segment Routing with IPv6
[    3.597200] In-situ OAM (IOAM) with IPv6
[    3.598502] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.603102] NET: Registered PF_PACKET protocol family
[    3.604578] Bridge firewalling registered
[    3.606145] Key type dns_resolver registered
[    3.607470] NET: Registered PF_VSOCK protocol family
[    3.636037] registered taskstats version 1
[    3.667458] Key type .fscrypt registered
[    3.694464] Key type fscrypt-provisioning registered
[    3.732173] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    3.854757] usb 1-1: new full-speed USB device number 2 using uhci_hcd
[    3.895799] Key type encrypted registered
[    3.958303] printk: console [netcon0] enabled
[    3.983816] netconsole: network logging started
[    4.168077] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2
[    4.184519] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0
[    4.200063] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1
[    4.292168] IP-Config: Complete:
[    4.320714]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    4.343849] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    4.359357]      host=192.168.7.2, domain=, nis-domain=(none)
[    4.381187]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    4.381343]      nameserver0=8.8.8.8
[    4.415342] md: Waiting for all devices to be available before autodetect
[    4.430279] md: If you don't use raid, use raid=noautodetect
[    4.454906] md: Autodetecting RAID arrays.
[    4.466544] md: autorun ...
[    4.486282] md: ... autorun DONE.
[    4.511465] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    4.612691] EXT4-fs (vda): mounted filesystem with ordered data mode. Quota mode: disabled.
[    4.634087] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    4.659261] devtmpfs: mounted
[    4.744086] Freeing unused kernel image (initmem) memory: 384K
[    4.757512] This architecture does not have kernel memory protection.
[    4.772006] Run /sbin/init as init process
[    4.837818] process '/sbin/init.sysvinit' started with executable stack
[    8.114491] udevd[124]: starting version 3.2.11
[    8.237120] udevd[125]: starting eudev-3.2.11
[   19.144853] EXT4-fs (vda): re-mounted. Quota mode: disabled.
hwclock: can't open '/dev/misc/rtc': No such file or directory
ALSA: Restoring mixer settings...
hwclock: can't open '/dev/misc/rtc': No such file or directory
INIT: bootlogd: writing to console: Input/output error
Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
dropbear.
Starting rpcbind daemon...
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemumips 6.1.51-yocto-standard #1 SMP PREEMPT Mon Sep  4 17:54:38 UTC 2023 mips
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 console=ttyS0 console=tty  printk.time=1
 
Current version of pixman: 0.42.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct  5 17:51:30 2023
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.2.3 qemumips /dev/ttyS0

qemumips login: 