[    0.000000] Linux version 6.5.10-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231126) #1 SMP PREEMPT_DYNAMIC Tue Nov  7 02:20:56 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffd8000-0x000000003fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000003] kvm-clock: using sched offset of 531999288 cycles
[    0.000006] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000011] tsc: Detected 2599.996 MHz processor
[    0.001715] last_pfn = 0x3ffd8 max_arch_pfn = 0x400000000
[    0.001751] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001757] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009877] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.010128] ACPI: Early table checksum verification disabled
[    0.010152] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS )
[    0.010164] ACPI: RSDT 0x000000003FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010174] ACPI: FACP 0x000000003FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010183] ACPI: DSDT 0x000000003FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010189] ACPI: FACS 0x000000003FFE0000 000040
[    0.010193] ACPI: APIC 0x000000003FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010198] ACPI: HPET 0x000000003FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010203] ACPI: MCFG 0x000000003FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010208] ACPI: WAET 0x000000003FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.010213] ACPI: Reserving FACP table memory at [mem 0x3ffe2217-0x3ffe230a]
[    0.010215] ACPI: Reserving DSDT table memory at [mem 0x3ffe0040-0x3ffe2216]
[    0.010217] ACPI: Reserving FACS table memory at [mem 0x3ffe0000-0x3ffe003f]
[    0.010219] ACPI: Reserving APIC table memory at [mem 0x3ffe230b-0x3ffe239a]
[    0.010220] ACPI: Reserving HPET table memory at [mem 0x3ffe239b-0x3ffe23d2]
[    0.010222] ACPI: Reserving MCFG table memory at [mem 0x3ffe23d3-0x3ffe240e]
[    0.010223] ACPI: Reserving WAET table memory at [mem 0x3ffe240f-0x3ffe2436]
[    0.010305] Zone ranges:
[    0.010307]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.010310]   DMA32    [mem 0x0000000001000000-0x000000003ffd7fff]
[    0.010313]   Normal   empty
[    0.010314] Movable zone start for each node
[    0.010315] Early memory node ranges
[    0.010316]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.010319]   node   0: [mem 0x0000000000100000-0x000000003ffd7fff]
[    0.010327] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffd7fff]
[    0.010337] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.010382] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.052822] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.053563] ACPI: PM-Timer IO Port: 0x608
[    0.053581] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.053642] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.053647] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.053651] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.053652] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.053664] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.053666] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.053672] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.053674] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.053681] TSC deadline timer available
[    0.053683] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.053717] [mem 0x40000000-0xafffffff] available for PCI devices
[    0.053720] Booting paravirtualized kernel on KVM
[    0.053723] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.053730] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.057290] percpu: Embedded 56 pages/cpu s189928 r8192 d31256 u524288
[    0.057343] Kernel command line: root=/dev/vda rw  ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.057469] random: crng init done
[    0.057624] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.057708] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.057810] Built 1 zonelists, mobility grouping on.  Total pages: 257752
[    0.060928] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.066883] Memory: 993356K/1048024K available (18432K kernel code, 2306K rwdata, 5180K rodata, 3376K init, 2336K bss, 54408K reserved, 0K cma-reserved)
[    0.066940] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.066950] Kernel/User page tables isolation: enabled
[    0.066988] ftrace: allocating 50661 entries in 198 pages
[    0.077741] ftrace: allocated 198 pages with 4 groups
[    0.077815] Dynamic Preempt: full
[    0.081103] rcu: Preemptible hierarchical RCU implementation.
[    0.081106] rcu: 	RCU event tracing is enabled.
[    0.081107] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.081110] 	All grace periods are expedited (rcu_expedited).
[    0.081111] 	Trampoline variant of Tasks RCU enabled.
[    0.081111] 	Rude variant of Tasks RCU enabled.
[    0.081112] 	Tracing variant of Tasks RCU enabled.
[    0.081113] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.081115] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.089976] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.090220] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.090354] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.099007] Console: colour VGA+ 80x25
[    0.099069] printk: console [ttyS0] enabled
[    0.279991] ACPI: Core revision 20230331
[    0.281267] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.283738] APIC: Switch to symmetric I/O mode setup
[    0.285359] x2apic enabled
[    0.286468] Switched APIC routing to physical x2apic.
[    0.289169] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.290736] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.293504] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.295646] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.296509] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.297511] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.298513] Spectre V2 : Mitigation: Retpolines
[    0.299508] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.300510] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.301508] Speculative Store Bypass: Vulnerable
[    0.302508] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.303507] MMIO Stale Data: Unknown: No mitigations
[    0.304508] SRBDS: Unknown: Dependent on hypervisor status
[    0.306510] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.307509] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.308509] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.309510] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.310508] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.341603] Freeing SMP alternatives memory: 52K
[    0.342515] pid_max: default: 32768 minimum: 301
[    0.343548] LSM: initializing lsm=capability,landlock,integrity
[    0.344524] landlock: Up and running.
[    0.345562] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.346521] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.348796] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.349800] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.350563] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.351556] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.352560] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.353541] signal: max sigframe size: 1776
[    0.354589] rcu: Hierarchical SRCU implementation.
[    0.355510] rcu: 	Max phase no-delay instances is 400.
[    0.356849] smp: Bringing up secondary CPUs ...
[    0.357703] smpboot: x86: Booting SMP configuration:
[    0.358519] .... node  #0, CPUs:      #1 #2 #3
[    0.359531] smp: Brought up 1 node, 4 CPUs
[    0.361493] smpboot: Max logical packages: 1
[    0.361508] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.366512] devtmpfs: initialized
[    0.367716] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.368513] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.369551] pinctrl core: initialized pinctrl subsystem
[    0.372016] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.372693] thermal_sys: Registered thermal governor 'step_wise'
[    0.372696] thermal_sys: Registered thermal governor 'user_space'
[    0.373539] cpuidle: using governor menu
[    0.375720] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.376515] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.377528] PCI: Using configuration type 1 for base access
[    0.378727] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.407503] raid6: sse2x4   gen() 15682 MB/s
[    0.425095] raid6: sse2x2   gen() 13832 MB/s
[    0.443493] raid6: sse2x1   gen()  7519 MB/s
[    0.444510] raid6: using algorithm sse2x4 gen() 15682 MB/s
[    0.462718] raid6: .... xor() 5000 MB/s, rmw enabled
[    0.464510] raid6: using ssse3x2 recovery algorithm
[    0.467662] ACPI: Added _OSI(Module Device)
[    0.469509] ACPI: Added _OSI(Processor Device)
[    0.470508] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.471509] ACPI: Added _OSI(Processor Aggregator Device)
[    0.482989] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.486790] ACPI: Interpreter enabled
[    0.487534] ACPI: PM: (supports S0 S3 S5)
[    0.488514] ACPI: Using IOAPIC for interrupt routing
[    0.489596] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.490510] PCI: Using E820 reservations for host bridge windows
[    0.491689] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.495582] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.496531] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.497633] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.498642] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.499692] PCI host bridge to bus 0000:00
[    0.500518] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.501515] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.502517] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.503520] pci_bus 0000:00: root bus resource [mem 0x40000000-0xafffffff window]
[    0.504518] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.505517] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.506522] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.507641] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.509296] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.511513] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.514513] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.519515] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.521516] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.523433] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.525516] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.527516] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.532514] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.535419] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.537362] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.541382] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.543371] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.546561] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.547694] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.549531] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.552413] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.553516] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.560517] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.564501] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.568311] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.569843] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.573033] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.574840] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.578780] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.580874] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.582241] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.585850] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.587116] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.587934] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.592515] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.594513] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.597056] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.601032] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.603220] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.604386] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.604686] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.605678] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.606681] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.607676] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.608647] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.609663] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.610594] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.611553] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.612550] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.613556] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.614552] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.615546] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.616548] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.617548] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.619920] iommu: Default domain type: Translated
[    0.620516] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.621743] SCSI subsystem initialized
[    0.622648] ACPI: bus type USB registered
[    0.623579] usbcore: registered new interface driver usbfs
[    0.624558] usbcore: registered new interface driver hub
[    0.625562] usbcore: registered new device driver usb
[    0.626596] pps_core: LinuxPPS API ver. 1 registered
[    0.627513] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.628535] PTP clock support registered
[    0.630062] Bluetooth: Core ver 2.22
[    0.630542] NET: Registered PF_BLUETOOTH protocol family
[    0.631513] Bluetooth: HCI device and connection manager initialized
[    0.632528] Bluetooth: HCI socket layer initialized
[    0.633519] Bluetooth: L2CAP socket layer initialized
[    0.634532] Bluetooth: SCO socket layer initialized
[    0.635627] PCI: Using ACPI for IRQ routing
[    0.708340] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.708503] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.708503] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.708525] vgaarb: loaded
[    0.709691] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.710513] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.714704] clocksource: Switched to clocksource kvm-clock
[    0.717702] pnp: PnP ACPI init
[    0.719565] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.723411] pnp: PnP ACPI: found 5 devices
[    0.737768] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.739836] NET: Registered PF_INET protocol family
[    0.742375] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.745086] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
[    0.747190] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.749032] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.750998] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.752732] TCP: Hash tables configured (established 8192 bind 8192)
[    0.754721] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.756495] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.758541] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.761768] RPC: Registered named UNIX socket transport module.
[    0.763121] RPC: Registered udp transport module.
[    0.764219] RPC: Registered tcp transport module.
[    0.765306] RPC: Registered tcp-with-tls transport module.
[    0.766598] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.768123] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.769524] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.770929] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.774611] pci_bus 0000:00: resource 7 [mem 0x40000000-0xafffffff window]
[    0.776184] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.777736] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.779814] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.782480] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.784803] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.787056] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.789289] PCI: CLS 0 bytes, default 64
[    0.790491] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.792375] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.796011] Initialise system trusted keyrings
[    0.797203] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.799880] NFS: Registering the id_resolver key type
[    0.801223] Key type id_resolver registered
[    0.802243] Key type id_legacy registered
[    0.804236] Key type cifs.idmap registered
[    0.819945] xor: automatically using best checksumming function   avx       
[    0.821587] Key type asymmetric registered
[    0.822309] Asymmetric key parser 'x509' registered
[    0.823184] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.824405] io scheduler mq-deadline registered
[    0.825233] io scheduler kyber registered
[    0.825974] io scheduler bfq registered
[    0.826997] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.829429] ACPI: button: Power Button [PWRF]
[    0.831290] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.834075] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.840843] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.847016] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.849791] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.851558] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.853609] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.859613] Linux agpgart interface v0.103
[    0.861172] ACPI: bus type drm_connector registered
[    0.862659] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.863942] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.870416] Console: switching to colour dummy device 80x25
[    0.872033] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.872038] [drm] features: -context_init
[    0.875353] [drm] number of scanouts: 1
[    0.876229] [drm] number of cap sets: 0
[    0.877702] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.885522] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.889627] Console: switching to colour frame buffer device 160x50
[    0.931806] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.937727] brd: module loaded
[    0.941704] loop: module loaded
[    0.942515] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.945226] virtio_blk virtio3: [vda] 800208 512-byte logical blocks (410 MB/391 MiB)
[    0.950191] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.951477] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.954551] scsi host0: ahci
[    0.955592] scsi host1: ahci
[    0.956706] scsi host2: ahci
[    0.957846] scsi host3: ahci
[    0.958958] scsi host4: ahci
[    0.960089] scsi host5: ahci
[    0.961033] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.963094] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.965165] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.967166] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.969238] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.971081] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.975094] e100: Intel(R) PRO/100 Network Driver
[    0.976234] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.977562] e1000: Intel(R) PRO/1000 Network Driver
[    0.978785] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.980195] e1000e: Intel(R) PRO/1000 Network Driver
[    0.981407] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.983042] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.987802] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.990982] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.992831] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.995037] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    1.003404] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.005298] hub 1-0:1.0: USB hub found
[    1.006316] hub 1-0:1.0: 6 ports detected
[    1.007697] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.008993] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.010449] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    1.011696] hub 2-0:1.0: USB hub found
[    1.012876] hub 2-0:1.0: 2 ports detected
[    1.015471] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.016763] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.018855] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    1.020552] hub 3-0:1.0: USB hub found
[    1.021720] hub 3-0:1.0: 2 ports detected
[    1.023886] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.025202] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.027321] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    1.029045] hub 4-0:1.0: USB hub found
[    1.029962] hub 4-0:1.0: 2 ports detected
[    1.032498] usbcore: registered new interface driver usb-storage
[    1.034321] usbcore: registered new interface driver usbserial_generic
[    1.036165] usbserial: USB Serial support registered for generic
[    1.038482] usbcore: registered new interface driver ftdi_sio
[    1.040068] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.042024] usbcore: registered new interface driver pl2303
[    1.043620] usbserial: USB Serial support registered for pl2303
[    1.045146] i8042: PNP: No PS/2 controller found.
[    1.046589] mousedev: PS/2 mouse device common for all mice
[    1.048319] rtc_cmos 00:03: RTC can wake from S4
[    1.050258] rtc_cmos 00:03: registered as rtc0
[    1.051410] rtc_cmos 00:03: setting system clock to 2023-12-01T16:33:22 UTC (1701448402)
[    1.053351] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    1.055611] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    1.056140] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.057730] intel_pstate: CPU model not supported
[    1.059416] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    1.060064] sdhci: Secure Digital Host Controller Interface driver
[    1.061029] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    1.062292] sdhci: Copyright(c) Pierre Ossman
[    1.062366] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.066934] usbcore: registered new interface driver usbhid
[    1.068200] usbhid: USB HID core driver
[    1.069133] u32 classifier
[    1.069770]     input device check on
[    1.070578]     Actions configured
[    1.071452] NET: Registered PF_INET6 protocol family
[    1.073285] Segment Routing with IPv6
[    1.074223] In-situ OAM (IOAM) with IPv6
[    1.076012] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.077934] NET: Registered PF_PACKET protocol family
[    1.079370] Bridge firewalling registered
[    1.080438] Key type dns_resolver registered
[    1.081730] NET: Registered PF_VSOCK protocol family
[    1.083633] IPI shorthand broadcast: enabled
[    1.087964] sched_clock: Marking stable (889332149, 198272333)->(1379151851, -291547369)
[    1.090543] registered taskstats version 1
[    1.091775] Loading compiled-in X.509 certificates
[    1.095787] Key type .fscrypt registered
[    1.096795] Key type fscrypt-provisioning registered
[    1.098916] Btrfs loaded, zoned=no, fsverity=no
[    1.102853] Key type encrypted registered
[    1.104950] printk: console [netcon0] enabled
[    1.106842] netconsole: network logging started
[    1.251319] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.280624] ata4: SATA link down (SStatus 0 SControl 300)
[    1.282339] ata1: SATA link down (SStatus 0 SControl 300)
[    1.289372] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.292450] ata5: SATA link down (SStatus 0 SControl 300)
[    1.294215] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.295707] ata3.00: applying bridge limits
[    1.297032] ata6: SATA link down (SStatus 0 SControl 300)
[    1.298729] ata2: SATA link down (SStatus 0 SControl 300)
[    1.304375] ata3.00: configured for UDMA/100
[    1.306239] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.320763] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.322488] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.345972] IP-Config: Complete:
[    1.347527]      device=eth0, hwaddr=52:54:00:12:34:0a, ipaddr=192.168.7.10, mask=255.255.255.0, gw=192.168.7.9
[    1.352246]      host=192.168.7.10, domain=, nis-domain=(none)
[    1.355090]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.355097]      nameserver0=8.8.8.8
[    1.362632] clk: Disabling unused clocks
[    1.364211] md: Waiting for all devices to be available before autodetect
[    1.365668] md: If you don't use raid, use raid=noautodetect
[    1.366899] md: Autodetecting RAID arrays.
[    1.368146] md: autorun ...
[    1.368831] md: ... autorun DONE.
[    1.379887] EXT4-fs (vda): mounted filesystem 79d1c498-d8af-4d3b-920b-4ce834136569 r/w with ordered data mode. Quota mode: disabled.
[    1.382541] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.384118] devtmpfs: mounted
[    1.386543] Freeing unused kernel image (initmem) memory: 3376K
[    1.387915] Write protecting the kernel read-only data: 24576k
[    1.389584] Freeing unused kernel image (rodata/data gap) memory: 964K
[    1.391054] Run /sbin/init as init process
[    1.395676] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input1
[    1.398324] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
INIT: version 3.04 booting
Starting udev
[    1.488607] udevd[124]: starting version 3.2.12
[    1.498796] udevd[125]: starting eudev-3.2.12
[    1.517306] usb 1-2: new high-speed USB device number 3 using ehci-pci
[    1.654485] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input2
[    1.708663] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.774036] EXT4-fs (vda): re-mounted 79d1c498-d8af-4d3b-920b-4ce834136569 r/w. Quota mode: disabled.
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting OpenBSD Secure Shell server: sshd
  generating ssh RSA host key...
  generating ssh ECDSA host key...
  generating ssh ED25519 host key...
done.
Starting syslogd/klogd: done

Poky (Yocto Project Reference Distro) 4.3+snapshot-328816d3f647c6d1d2b43c1381aaa23f0a1bd5e5 qemux86-64 /dev/ttyS0

qemux86-64 login: 