[    0.000000] Linux version 6.5.10-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231126) #1 SMP PREEMPT_DYNAMIC Tue Nov  7 02:20:56 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000003] kvm-clock: using sched offset of 530473148 cycles
[    0.000005] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000011] tsc: Detected 2599.996 MHz processor
[    0.001268] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.001297] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001302] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.011212] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.011412] ACPI: Early table checksum verification disabled
[    0.011432] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS )
[    0.011440] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011447] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011454] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011459] ACPI: FACS 0x000000001FFE0000 000040
[    0.011463] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011467] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011472] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011476] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.011479] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.011481] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.011482] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.011483] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.011484] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.011485] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.011485] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.011539] Zone ranges:
[    0.011541]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011543]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.011544]   Normal   empty
[    0.011546] Movable zone start for each node
[    0.011546] Early memory node ranges
[    0.011547]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.011549]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.011552] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.012050] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.012068] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.014134] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.014697] ACPI: PM-Timer IO Port: 0x608
[    0.014709] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.014752] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.014757] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.014759] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.014760] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.014764] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.014766] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.014771] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.014772] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.014776] TSC deadline timer available
[    0.014777] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.014798] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.014799] Booting paravirtualized kernel on KVM
[    0.014801] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.014805] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.015550] percpu: Embedded 56 pages/cpu s189928 r8192 d31256 u524288
[    0.015584] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.015683] random: crng init done
[    0.015750] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.015784] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.015891] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.016520] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.017878] Memory: 478028K/523736K available (18432K kernel code, 2306K rwdata, 5180K rodata, 3376K init, 2336K bss, 45448K reserved, 0K cma-reserved)
[    0.017923] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.017931] Kernel/User page tables isolation: enabled
[    0.017968] ftrace: allocating 50661 entries in 198 pages
[    0.030897] ftrace: allocated 198 pages with 4 groups
[    0.030935] Dynamic Preempt: full
[    0.031456] rcu: Preemptible hierarchical RCU implementation.
[    0.031457] rcu: 	RCU event tracing is enabled.
[    0.031457] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.031459] 	All grace periods are expedited (rcu_expedited).
[    0.031459] 	Trampoline variant of Tasks RCU enabled.
[    0.031460] 	Rude variant of Tasks RCU enabled.
[    0.031460] 	Tracing variant of Tasks RCU enabled.
[    0.031461] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.031462] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.035538] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.035736] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.035856] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.043282] Console: colour VGA+ 80x25
[    0.043326] printk: console [ttyS0] enabled
[    0.196661] ACPI: Core revision 20230331
[    0.197702] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.199821] APIC: Switch to symmetric I/O mode setup
[    0.201263] x2apic enabled
[    0.202246] Switched APIC routing to physical x2apic.
[    0.204770] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.207642] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.209924] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.211961] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.212926] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.213927] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.214928] Spectre V2 : Mitigation: Retpolines
[    0.215926] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.216926] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.217926] Speculative Store Bypass: Vulnerable
[    0.218927] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.219926] MMIO Stale Data: Unknown: No mitigations
[    0.220926] SRBDS: Unknown: Dependent on hypervisor status
[    0.221936] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.222926] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.223926] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.224927] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.225926] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.250363] Freeing SMP alternatives memory: 52K
[    0.250928] pid_max: default: 32768 minimum: 301
[    0.251947] LSM: initializing lsm=capability,landlock,integrity
[    0.252933] landlock: Up and running.
[    0.253956] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.254928] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.256205] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.257085] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.257951] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.258949] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.259950] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.260954] signal: max sigframe size: 1776
[    0.261866] rcu: Hierarchical SRCU implementation.
[    0.261928] rcu: 	Max phase no-delay instances is 400.
[    0.263169] smp: Bringing up secondary CPUs ...
[    0.264037] smpboot: x86: Booting SMP configuration:
[    0.264933] .... node  #0, CPUs:      #1 #2 #3
[    0.265970] smp: Brought up 1 node, 4 CPUs
[    0.267856] smpboot: Max logical packages: 1
[    0.267928] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.269252] devtmpfs: initialized
[    0.270100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.270932] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.271962] pinctrl core: initialized pinctrl subsystem
[    0.274282] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.275095] thermal_sys: Registered thermal governor 'step_wise'
[    0.275097] thermal_sys: Registered thermal governor 'user_space'
[    0.275941] cpuidle: using governor menu
[    0.278081] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.278929] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.279935] PCI: Using configuration type 1 for base access
[    0.281093] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.298926] raid6: sse2x4   gen() 13229 MB/s
[    0.315927] raid6: sse2x2   gen() 12645 MB/s
[    0.332927] raid6: sse2x1   gen()  9783 MB/s
[    0.333927] raid6: using algorithm sse2x4 gen() 13229 MB/s
[    0.351926] raid6: .... xor() 7237 MB/s, rmw enabled
[    0.352928] raid6: using ssse3x2 recovery algorithm
[    0.353978] ACPI: Added _OSI(Module Device)
[    0.354911] ACPI: Added _OSI(Processor Device)
[    0.354928] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.355902] ACPI: Added _OSI(Processor Aggregator Device)
[    0.356825] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.358071] ACPI: Interpreter enabled
[    0.358941] ACPI: PM: (supports S0 S3 S5)
[    0.359928] ACPI: Using IOAPIC for interrupt routing
[    0.360952] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.361927] PCI: Using E820 reservations for host bridge windows
[    0.363017] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.366009] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.366932] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.367969] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.368986] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.369997] PCI host bridge to bus 0000:00
[    0.370857] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.370928] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.371927] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.372928] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.373927] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.374927] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.375928] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.376994] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.378578] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.379928] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.381928] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.386494] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.387928] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.389726] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.391792] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.392879] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.395728] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.398624] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.400482] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.402938] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.404959] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.407950] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.409029] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.410796] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.411928] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.413928] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.417928] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.420817] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.422586] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.423835] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.426095] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.427829] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.429597] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.430848] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.431453] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.434136] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.435472] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.436227] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.440928] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.442527] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.443971] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.447280] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.449063] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.450017] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.451014] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.452013] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.453011] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.454011] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.455011] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.456014] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.456965] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.457937] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.458936] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.459941] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.460938] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.461936] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.462936] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.463936] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.465380] iommu: Default domain type: Translated
[    0.465928] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.467048] SCSI subsystem initialized
[    0.468106] ACPI: bus type USB registered
[    0.468952] usbcore: registered new interface driver usbfs
[    0.469959] usbcore: registered new interface driver hub
[    0.470936] usbcore: registered new device driver usb
[    0.471951] pps_core: LinuxPPS API ver. 1 registered
[    0.472927] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.473931] PTP clock support registered
[    0.475303] Bluetooth: Core ver 2.22
[    0.475937] NET: Registered PF_BLUETOOTH protocol family
[    0.476927] Bluetooth: HCI device and connection manager initialized
[    0.477934] Bluetooth: HCI socket layer initialized
[    0.478928] Bluetooth: L2CAP socket layer initialized
[    0.479935] Bluetooth: SCO socket layer initialized
[    0.481006] PCI: Using ACPI for IRQ routing
[    0.549953] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.550924] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.550924] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.550929] vgaarb: loaded
[    0.551503] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.551927] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.555992] clocksource: Switched to clocksource kvm-clock
[    0.557121] pnp: PnP ACPI init
[    0.557857] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.559335] pnp: PnP ACPI: found 5 devices
[    0.571489] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.573131] NET: Registered PF_INET protocol family
[    0.574050] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.575573] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.577089] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.578477] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.579834] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.581118] TCP: Hash tables configured (established 4096 bind 4096)
[    0.582280] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.583449] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.584722] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.586330] RPC: Registered named UNIX socket transport module.
[    0.587402] RPC: Registered udp transport module.
[    0.588253] RPC: Registered tcp transport module.
[    0.589090] RPC: Registered tcp-with-tls transport module.
[    0.590051] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.591194] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.592330] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.593470] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.594660] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.595873] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.597143] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.598650] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.601433] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.602970] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.604501] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.606054] PCI: CLS 0 bytes, default 64
[    0.606996] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.608542] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.611466] Initialise system trusted keyrings
[    0.612453] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.614681] NFS: Registering the id_resolver key type
[    0.617088] Key type id_resolver registered
[    0.618961] Key type id_legacy registered
[    0.621485] Key type cifs.idmap registered
[    0.655994] xor: automatically using best checksumming function   avx       
[    0.658893] Key type asymmetric registered
[    0.660504] Asymmetric key parser 'x509' registered
[    0.663973] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.666729] io scheduler mq-deadline registered
[    0.668413] io scheduler kyber registered
[    0.669952] io scheduler bfq registered
[    0.671912] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.674955] ACPI: button: Power Button [PWRF]
[    0.677579] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.682010] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.686595] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.696677] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.700458] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.703407] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.706625] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.711915] Linux agpgart interface v0.103
[    0.713669] ACPI: bus type drm_connector registered
[    0.715713] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.717757] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.724776] Console: switching to colour dummy device 80x25
[    0.728172] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.728175] [drm] features: -context_init
[    0.732449] [drm] number of scanouts: 1
[    0.733665] [drm] number of cap sets: 0
[    0.735456] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.741302] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.747013] Console: switching to colour frame buffer device 160x50
[    0.805348] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.813343] brd: module loaded
[    0.817436] loop: module loaded
[    0.819213] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.824912] virtio_blk virtio3: [vda] 794034 512-byte logical blocks (407 MB/388 MiB)
[    0.832727] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.836284] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.841105] scsi host0: ahci
[    0.842950] scsi host1: ahci
[    0.844676] scsi host2: ahci
[    0.846473] scsi host3: ahci
[    0.848223] scsi host4: ahci
[    0.850028] scsi host5: ahci
[    0.851441] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.854598] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.857700] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.860523] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.863345] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.866078] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.871611] e100: Intel(R) PRO/100 Network Driver
[    0.873395] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.875431] e1000: Intel(R) PRO/1000 Network Driver
[    0.877247] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.879363] e1000e: Intel(R) PRO/1000 Network Driver
[    0.881201] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.883244] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.885116] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.888601] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.890802] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.893494] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.895932] hub 1-0:1.0: USB hub found
[    0.897290] hub 1-0:1.0: 2 ports detected
[    0.899167] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.902136] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.905803] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.915331] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.918256] hub 2-0:1.0: USB hub found
[    0.919929] hub 2-0:1.0: 6 ports detected
[    0.944418] hub 1-0:1.0: USB hub found
[    0.946263] hub 1-0:1.0: 2 ports detected
[    0.948360] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.955403] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.958490] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.961271] hub 3-0:1.0: USB hub found
[    0.962790] hub 3-0:1.0: 2 ports detected
[    0.965494] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.967749] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.970803] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.973438] hub 4-0:1.0: USB hub found
[    0.974937] hub 4-0:1.0: 2 ports detected
[    0.976864] usbcore: registered new interface driver usb-storage
[    0.979241] usbcore: registered new interface driver usbserial_generic
[    0.981970] usbserial: USB Serial support registered for generic
[    0.984346] usbcore: registered new interface driver ftdi_sio
[    0.986583] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.989372] usbcore: registered new interface driver pl2303
[    0.991505] usbserial: USB Serial support registered for pl2303
[    0.993853] i8042: PNP: No PS/2 controller found.
[    0.995861] mousedev: PS/2 mouse device common for all mice
[    0.998270] rtc_cmos 00:03: RTC can wake from S4
[    1.001139] rtc_cmos 00:03: registered as rtc0
[    1.002872] rtc_cmos 00:03: setting system clock to 2023-12-03T00:01:18 UTC (1701561678)
[    1.005852] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    1.009130] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    1.009385] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.012295] intel_pstate: CPU model not supported
[    1.014982] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    1.016427] sdhci: Secure Digital Host Controller Interface driver
[    1.018900] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    1.020900] sdhci: Copyright(c) Pierre Ossman
[    1.025540] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.027416] usbcore: registered new interface driver usbhid
[    1.029088] usbhid: USB HID core driver
[    1.032077] u32 classifier
[    1.032909]     input device check on
[    1.033990]     Actions configured
[    1.035115] NET: Registered PF_INET6 protocol family
[    1.038107] Segment Routing with IPv6
[    1.039816] In-situ OAM (IOAM) with IPv6
[    1.041647] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    1.044580] NET: Registered PF_PACKET protocol family
[    1.046874] Bridge firewalling registered
[    1.048823] Key type dns_resolver registered
[    1.050967] NET: Registered PF_VSOCK protocol family
[    1.054106] IPI shorthand broadcast: enabled
[    1.058524] sched_clock: Marking stable (889004959, 169180951)->(1159222810, -101036900)
[    1.060654] registered taskstats version 1
[    1.061678] Loading compiled-in X.509 certificates
[    1.064807] Key type .fscrypt registered
[    1.065737] Key type fscrypt-provisioning registered
[    1.067386] Btrfs loaded, zoned=no, fsverity=no
[    1.069331] Key type encrypted registered
[    1.070407] printk: console [netcon0] enabled
[    1.071456] netconsole: network logging started
[    1.158279] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.181444] ata6: SATA link down (SStatus 0 SControl 300)
[    1.184442] ata1: SATA link down (SStatus 0 SControl 300)
[    1.187312] ata4: SATA link down (SStatus 0 SControl 300)
[    1.190143] ata5: SATA link down (SStatus 0 SControl 300)
[    1.193064] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.196506] ata2: SATA link down (SStatus 0 SControl 300)
[    1.198914] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    1.201562] ata3.00: applying bridge limits
[    1.203866] ata3.00: configured for UDMA/100
[    1.206625] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    1.222810] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    1.225787] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.248360] IP-Config: Complete:
[    1.249913]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.254207]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.256675]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.256679]      nameserver0=8.8.8.8
[    1.261674] clk: Disabling unused clocks
[    1.264080] md: Waiting for all devices to be available before autodetect
[    1.266340] md: If you don't use raid, use raid=noautodetect
[    1.268368] md: Autodetecting RAID arrays.
[    1.269729] md: autorun ...
[    1.270698] md: ... autorun DONE.
[    1.280825] EXT4-fs (vda): mounted filesystem af8eeea0-5dbd-47cc-b7e4-c4e28950919b r/w with ordered data mode. Quota mode: disabled.
[    1.288744] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.290951] devtmpfs: mounted
[    1.295297] Freeing unused kernel image (initmem) memory: 3376K
[    1.297533] Write protecting the kernel read-only data: 24576k
[    1.300096] Freeing unused kernel image (rodata/data gap) memory: 964K
[    1.302467] Run /sbin/init as init process
[    1.310729] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    1.314888] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
INIT: version 3.04 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.434225] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.468462] udevd[137]: starting version 3.2.12
[    1.482332] udevd[138]: starting eudev-3.2.12
[    1.570682] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.626670] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.704304] EXT4-fs (vda): re-mounted af8eeea0-5dbd-47cc-b7e4-c4e28950919b r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [c/debug/seatd/0.8.0/seatd/seat.c:39] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [c/debug/seatd/0.8.0/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.161 [1;34m [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 343, uid: 1000, gid: 1000)[0m
00:00:00.161 [1;34m [c/debug/seatd/0.8.0/seatd/seat.c:170] Added client 2 to seat0[0m
00:00:00.161 [1;34m [c/debug/seatd/0.8.0/seatd/seat.c:480] Opened client 2 on seat0[0m
[    2.482901] weston[343]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
could not load cursor 'dnd-move'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCf3c0wlqiCMxekRHRhwu+MHW1Ic0mCaxCSJt7m4I+P/fOWXPyYCNatfDg3LxLf4k1Apo+WccKFidywNmJBpUuYY7WGnvo4D1FIQp0y9j01ql+3Slxrk+4cML8zkAW36ua24MC3eTf/v13rcFdhd/++yF2TryVlDmuU90tX7XNzxZtNmjz21lyT+/nuirM2G2FuliMKaOHD0EdmOZYybSio3ASgPzENEH0bwF/vwD18oFeJmvVxqWdQBvWj+1XbfR0i6ieEfseg5KK/CRvcyohby7p+UmXr3RMwD9/zr6QH1x7b0yKUJ0FPY9BfZ7lOJmu+vXhJlh+gfGDfXDpipI23 root@qemux86-64
Fingerprint: SHA256:pYmnS4k1lzXMqbCqsZC+QW4+qY0tPgoMAENKwFK8stQ
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
[    2.840588] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.842220] Bluetooth: BNEP filters: protocol multicast
[    2.842229] Bluetooth: BNEP socket layer initialized
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.3+snapshot-fcf2753df27250d1f9e8d55651022a92fc3c673d qemux86-64 /dev/ttyS0

qemux86-64 login: 00:01:41.556 [1;34m [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 5981, uid: 0, gid: 0)[0m
00:01:41.557 [1;31m [c/debug/seatd/0.8.0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client[0m
00:01:41.558 [1;31m [c/debug/seatd/0.8.0/seatd/client.c:177] Could not add client to target seat: Device or resource busy[0m
