[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.12-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231126) #1 PREEMPT Thu Jan 18 21:01:37 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241280K/262144K available (10633K kernel code, 1424K rwdata, 2832K rodata, 464K init, 340K bss, 20864K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42188 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000239] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000801] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.007000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.017068] Console: colour dummy device 80x30 [ 0.019617] Calibrating delay loop... 513.63 BogoMIPS (lpj=2568192) [ 0.129064] CPU: Testing write buffer coherency: ok [ 0.131254] pid_max: default: 32768 minimum: 301 [ 0.133893] LSM: initializing lsm=capability,landlock,integrity [ 0.134705] landlock: Up and running. [ 0.139894] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.140007] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.196924] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.197782] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.198992] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.200427] Setting up static identity map for 0x8400 - 0x8458 [ 0.202178] rcu: Hierarchical SRCU implementation. [ 0.202258] rcu: Max phase no-delay instances is 1000. [ 0.222457] devtmpfs: initialized [ 0.243697] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.245567] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.245763] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.259743] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.266158] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.290407] platform vga: Fixed dependency cycle(s) with /bridge/ports/port@1/endpoint [ 0.314217] amba 10120000.display: Fixed dependency cycle(s) with /bridge/ports/port@0/endpoint [ 0.321802] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000/port@0/endpoint@0 [ 0.329914] Serial: AMBA PL011 UART driver [ 0.341839] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.343721] printk: console [ttyAMA0] enabled [ 0.393517] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.397537] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.400966] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.403563] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.414251] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.788825] raid6: int32x8 gen() 61 MB/s [ 1.128819] raid6: int32x4 gen() 102 MB/s [ 1.468785] raid6: int32x2 gen() 322 MB/s [ 1.808837] raid6: int32x1 gen() 337 MB/s [ 1.809565] raid6: using algorithm int32x1 gen() 337 MB/s [ 2.148857] raid6: .... xor() 157 MB/s, rmw enabled [ 2.149535] raid6: using intx1 recovery algorithm [ 2.155582] SCSI subsystem initialized [ 2.158007] usbcore: registered new interface driver usbfs [ 2.169624] usbcore: registered new interface driver hub [ 2.174648] usbcore: registered new device driver usb [ 2.191924] pps_core: LinuxPPS API ver. 1 registered [ 2.192911] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.194667] PTP clock support registered [ 2.213370] Advanced Linux Sound Architecture Driver Initialized. [ 2.255635] vgaarb: loaded [ 2.274541] clocksource: Switched to clocksource arm,sp804 [ 2.730370] NET: Registered PF_INET protocol family [ 2.733105] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.746253] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.747317] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.748120] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.749031] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.749962] TCP: Hash tables configured (established 2048 bind 2048) [ 2.752388] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.753324] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.756907] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.767737] RPC: Registered named UNIX socket transport module. [ 2.768693] RPC: Registered udp transport module. [ 2.769198] RPC: Registered tcp transport module. [ 2.769925] RPC: Registered tcp-with-tls transport module. [ 2.770823] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.772155] PCI: CLS 0 bytes, default 32 [ 2.785355] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.793541] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.804820] NFS: Registering the id_resolver key type [ 2.807052] Key type id_resolver registered [ 2.807524] Key type id_legacy registered [ 2.814538] Key type cifs.idmap registered [ 3.146253] xor: measuring software checksum speed [ 3.160371] arm4regs : 761 MB/sec [ 3.171280] 8regs : 983 MB/sec [ 3.183759] 32regs : 926 MB/sec [ 3.184612] xor: using function: 8regs (983 MB/sec) [ 3.186068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.186983] io scheduler mq-deadline registered [ 3.187556] io scheduler kyber registered [ 3.188486] io scheduler bfq registered [ 3.196445] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 3.198854] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 3.201387] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 3.203627] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 3.206205] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 3.207790] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 3.209262] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 3.210145] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 3.212585] versatile-pci 10001000.pci: PCI core found (slot 11) [ 3.215770] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 3.216688] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.217639] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.218265] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 3.218956] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 3.222502] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 3.224656] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 3.225393] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 3.226000] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 3.231519] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 3.232308] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 3.232959] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.233683] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 3.235579] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 3.236241] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 3.236818] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.238252] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 3.238888] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.240325] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 3.240982] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.242459] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 3.243099] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 3.243666] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.246624] PCI: bus0: Fast back to back transfers disabled [ 3.248964] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 3.249934] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 3.250890] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 3.251672] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 3.252364] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 3.253090] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 3.253811] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 3.254787] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 3.255493] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.256115] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 3.256703] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 3.257290] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 3.259708] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 3.263441] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.265747] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.269522] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 3.273656] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 3.276500] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 3.279660] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 3.283940] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.307142] random: crng init done [ 3.311454] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 3.312782] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.312838] [drm] features: -context_init [ 3.314574] [drm] number of scanouts: 1 [ 3.315049] [drm] number of cap sets: 0 [ 3.335720] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 3.661292] Console: switching to colour frame buffer device 160x50 [ 3.739373] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.765743] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 3.770866] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.865292] brd: module loaded [ 3.866624] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 3.873401] virtio_blk virtio3: [vda] 948734 512-byte logical blocks (486 MB/463 MiB) [ 3.903258] physmap-flash 34000000.flash: versatile/realview flash protection [ 3.920886] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 3.925074] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 3.926704] Intel/Sharp Extended Query Table at 0x0031 [ 3.928238] Using buffer write method [ 3.976729] smc91x: not found (-19). [ 3.978081] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 3.978991] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 4.017336] rtc-ds1307 0-0068: registered as rtc0 [ 4.027369] rtc-ds1307 0-0068: setting system clock to 2024-02-02T01:35:38 UTC (1706837738) [ 4.035444] rtc-pl031 101e8000.rtc: registered as rtc1 [ 4.036932] i2c_dev: i2c /dev entries driver [ 4.038753] versatile reboot driver registered [ 4.042379] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4.056945] leds-syscon 10000008.0.led: registered LED (null) [ 4.058375] leds-syscon 10000008.1.led: registered LED (null) [ 4.059565] leds-syscon 10000008.2.led: registered LED (null) [ 4.060844] leds-syscon 10000008.3.led: registered LED (null) [ 4.061990] leds-syscon 10000008.4.led: registered LED (null) [ 4.063126] leds-syscon 10000008.5.led: registered LED (null) [ 4.066244] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 4.069846] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 4.072106] leds-syscon 10000008.6.led: registered LED (null) [ 4.073408] leds-syscon 10000008.7.led: registered LED (null) [ 4.076124] ledtrig-cpu: registered to indicate activity on CPUs [ 4.080180] usbcore: registered new interface driver usbhid [ 4.080766] usbhid: USB HID core driver [ 4.101276] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 4.148577] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.149445] aaci-pl041 10004000.aaci: FIFO 512 entries [ 4.151493] u32 classifier [ 4.151847] input device check on [ 4.152211] Actions configured [ 4.155457] NET: Registered PF_INET6 protocol family [ 4.169627] Segment Routing with IPv6 [ 4.170359] In-situ OAM (IOAM) with IPv6 [ 4.171844] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.177491] NET: Registered PF_PACKET protocol family [ 4.178835] Bridge firewalling registered [ 4.180626] Key type dns_resolver registered [ 4.182063] NET: Registered PF_VSOCK protocol family [ 4.242501] registered taskstats version 1 [ 4.295379] Key type .fscrypt registered [ 4.295881] Key type fscrypt-provisioning registered [ 4.307204] Btrfs loaded, zoned=no, fsverity=no [ 4.319694] Key type encrypted registered [ 4.336046] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.336906] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.338579] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.345738] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.346539] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.348140] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.350449] printk: console [netcon0] enabled [ 4.351066] netconsole: network logging started [ 4.778677] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 4.782698] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.783523] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.788015] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.855105] IP-Config: Complete: [ 4.855705] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 4.857099] host=192.168.7.2, domain=, nis-domain=(none) [ 4.857754] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.857863] nameserver0=8.8.8.8 [ 4.865881] clk: Disabling unused clocks [ 4.866965] ALSA device list: [ 4.867434] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.879039] md: Waiting for all devices to be available before autodetect [ 4.879741] md: If you don't use raid, use raid=noautodetect [ 4.880334] md: Autodetecting RAID arrays. [ 4.880783] md: autorun ... [ 4.881125] md: ... autorun DONE. [ 5.012147] EXT4-fs (vda): mounted filesystem fad5ff5f-cc43-4d57-8a0b-91d946ea7484 r/w with ordered data mode. Quota mode: disabled. [ 5.014458] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.018574] devtmpfs: mounted [ 5.078357] Freeing unused kernel image (initmem) memory: 464K [ 5.079079] Kernel memory protection not selected by kernel config. [ 5.080076] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 8.525186] udevd[97]: starting version 3.2.14 [ 8.751817] udevd[98]: starting eudev-3.2.14 [ 15.219657] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 15.350220] clcd-pl11x: probe of 10120000.display failed with error -2 [ 15.470881] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 15.727338] amba 10100000.smc: deferred probe pending [ 15.836031] amba 10110000.mpmc: deferred probe pending [ 15.843356] amba 101e0000.sctl: deferred probe pending [ 16.026695] amba 101e1000.watchdog: deferred probe pending [ 16.144896] amba 101f0000.sci: deferred probe pending [ 16.151761] amba 101f4000.spi: deferred probe pending [ 16.324992] amba 1000a000.sci: deferred probe pending [ 16.332496] amba 10120000.display: deferred probe pending [ 28.658376] EXT4-fs (vda): re-mounted fad5ff5f-cc43-4d57-8a0b-91d946ea7484 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.10/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.10/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.12-yocto-standard #1 PREEMPT Thu Jan 18 21:01:37 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 2 01:36:13 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-0e2d83804d1d13141f555a8a906ca31b634077c3 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-ZpWhwkQ1nv,guid=55ae926846c7f731a3e3ee7565bc4723 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused [settings daemon] Forking. run with -n to prevent fork Matchbox: error parsing /usr/share/themes/Sato/matchbox/theme.xml Error loading resource from dbus-daemon[535]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=513 comm="connman-applet") dbus-daemon[535]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry