[ 0.000000] Linux version 6.6.12-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231126) #1 SMP PREEMPT Thu Jan 18 21:01:48 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40736 r8192 d20704 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238392K/262140K available (14187K kernel code, 1471K rwdata, 3624K rodata, 420K init, 402K bss, 23748K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.01 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11944911341 ns [ 0.000226] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421248508ns [ 0.013966] Console: colour dummy device 80x25 [ 0.014974] printk: console [tty0] enabled [ 0.015847] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.12-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231126) #1 SMP PREEMPT Thu Jan 18 21:01:48 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40736 r8192 d20704 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238392K/262140K available (14187K kernel code, 1471K rwdata, 3624K rodata, 420K init, 402K bss, 23748K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.01 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11944911341 ns [ 0.000226] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421248508ns [ 0.013966] Console: colour dummy device 80x25 [ 0.014974] printk: console [tty0] enabled [ 0.015847] printk: bootconsole [uart8250] disabled [ 0.018778] Calibrating delay loop... 990.41 BogoMIPS (lpj=4952064) [ 0.112478] pid_max: default: 32768 minimum: 301 [ 0.114248] LSM: initializing lsm=capability,landlock,integrity [ 0.114949] landlock: Up and running. [ 0.118255] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.118437] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.163264] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.164184] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.164830] Performance counters: No available PMU. [ 0.166298] rcu: Hierarchical SRCU implementation. [ 0.166381] rcu: Max phase no-delay instances is 1000. [ 0.175029] smp: Bringing up secondary CPUs ... [ 0.175391] smp: Brought up 1 node, 1 CPU [ 0.190545] devtmpfs: initialized [ 0.199800] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.200067] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.210195] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.595182] raid6: int32x8 gen() 241 MB/s [ 0.943563] raid6: int32x4 gen() 638 MB/s [ 1.301304] raid6: int32x2 gen() 689 MB/s [ 1.584340] raid6: int32x1 gen() 542 MB/s [ 1.584492] raid6: using algorithm int32x2 gen() 689 MB/s [ 1.750435] raid6: .... xor() 409 MB/s, rmw enabled [ 1.750636] raid6: using intx1 recovery algorithm [ 1.754323] SCSI subsystem initialized [ 1.755111] usbcore: registered new interface driver usbfs [ 1.755502] usbcore: registered new interface driver hub [ 1.755779] usbcore: registered new device driver usb [ 1.756281] pps_core: LinuxPPS API ver. 1 registered [ 1.756354] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.756543] PTP clock support registered [ 1.776527] PCI host bridge to bus 0000:00 [ 1.776962] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.777609] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.777815] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.779627] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 1.780570] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 1.780869] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.781061] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.781171] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.781285] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.781396] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.784367] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.785360] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.785731] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.785913] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.786008] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.786119] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.786206] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.786719] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.786911] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.787727] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.788350] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.788523] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.789201] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.789319] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.789493] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.789613] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.790240] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.790387] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.790548] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.790727] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.791365] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.791501] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.791635] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.792168] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.792301] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.792433] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.793299] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.794911] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.795284] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.795440] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.795560] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.795757] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.795879] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.796024] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.796164] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.796269] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.796348] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.796437] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.796526] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.798698] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 1.798846] pci 0000:00:12.0: vgaarb: bridge control possible [ 1.798970] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.799109] vgaarb: loaded [ 1.801649] clocksource: Switched to clocksource MIPS [ 1.858512] NET: Registered PF_INET protocol family [ 1.860003] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.868954] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.869180] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.869336] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.869612] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.869845] TCP: Hash tables configured (established 2048 bind 2048) [ 1.871421] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.871758] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.873717] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.877011] RPC: Registered named UNIX socket transport module. [ 1.877135] RPC: Registered udp transport module. [ 1.877198] RPC: Registered tcp transport module. [ 1.877254] RPC: Registered tcp-with-tls transport module. [ 1.877310] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.878203] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 1.879269] PCI: CLS 0 bytes, default 16 [ 1.889675] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.893971] NFS: Registering the id_resolver key type [ 1.895501] Key type id_resolver registered [ 1.895600] Key type id_legacy registered [ 1.898471] Key type cifs.idmap registered [ 2.422832] xor: measuring software checksum speed [ 2.433244] 8regs : 993 MB/sec [ 2.443938] 8regs_prefetch : 947 MB/sec [ 2.454074] 32regs : 993 MB/sec [ 2.464786] 32regs_prefetch : 939 MB/sec [ 2.464893] xor: using function: 32regs (993 MB/sec) [ 2.465422] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.465680] io scheduler mq-deadline registered [ 2.465809] io scheduler kyber registered [ 2.472092] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.475743] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.477181] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.479822] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.492144] printk: console [ttyS0] disabled [ 2.518579] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.518782] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.520696] printk: console [ttyS0] enabled [ 2.615184] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.615842] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 2.616414] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 2.625926] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 2.631232] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 2.632585] [drm] Found bochs VGA, ID 0xb0c5. [ 2.633028] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 2.637859] [drm] Found EDID data blob. [ 2.645859] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 2.749831] Console: switching to colour frame buffer device 160x50 [ 2.769538] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.808484] brd: module loaded [ 2.809943] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 2.816948] virtio_blk virtio2: [vda] 1133188 512-byte logical blocks (580 MB/553 MiB) [ 2.843671] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 2.845626] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 2.849721] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 2.862323] hub 1-0:1.0: USB hub found [ 2.863558] hub 1-0:1.0: 2 ports detected [ 2.872357] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.873935] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.878869] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.887620] usbcore: registered new interface driver usbhid [ 2.888421] usbhid: USB HID core driver [ 2.889622] u32 classifier [ 2.890152] input device check on [ 2.890587] Actions configured [ 2.892750] NET: Registered PF_INET6 protocol family [ 2.902818] Segment Routing with IPv6 [ 2.903498] In-situ OAM (IOAM) with IPv6 [ 2.904891] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.909004] NET: Registered PF_PACKET protocol family [ 2.910216] Bridge firewalling registered [ 2.916217] Key type dns_resolver registered [ 2.917437] NET: Registered PF_VSOCK protocol family [ 2.949735] registered taskstats version 1 [ 2.983647] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.997944] Key type .fscrypt registered [ 3.008907] Key type fscrypt-provisioning registered [ 3.036447] Btrfs loaded, zoned=no, fsverity=no [ 3.070244] Key type encrypted registered [ 3.084219] printk: console [netcon0] enabled [ 3.103945] netconsole: network logging started [ 3.181435] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 3.474949] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 3.495640] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 3.655430] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.762164] IP-Config: Complete: [ 3.804621] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 3.832315] host=192.168.7.2, domain=, nis-domain=(none) [ 3.866250] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.866471] nameserver0=8.8.8.8 [ 3.953357] clk: Disabling unused clocks [ 3.976715] md: Waiting for all devices to be available before autodetect [ 4.000164] md: If you don't use raid, use raid=noautodetect [ 4.014819] md: Autodetecting RAID arrays. [ 4.042618] md: autorun ... [ 4.056189] md: ... autorun DONE. [ 4.147461] EXT4-fs (vda): mounted filesystem ae249ebd-f0f9-4daf-89ad-e3b56af44681 r/w with ordered data mode. Quota mode: disabled. [ 4.160005] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.182402] devtmpfs: mounted [ 4.251329] Freeing unused kernel image (initmem) memory: 420K [ 4.261048] This architecture does not have kernel memory protection. [ 4.267119] Run /sbin/init as init process [ 4.321416] process '/sbin/init.sysvinit' started with executable stack [ 7.115421] udevd[92]: starting version 3.2.14 [ 7.226908] udevd[93]: starting eudev-3.2.14 [ 24.843507] EXT4-fs (vda): re-mounted ae249ebd-f0f9-4daf-89ad-e3b56af44681 r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.12-yocto-standard #1 SMP PREEMPT Thu Jan 18 21:01:48 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 1 02:21:17 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-d50c4a1e362d310ff231adb7366712b70b668a1a qemumips /dev/ttyS0 qemumips login: