[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.12-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231126) #1 PREEMPT Thu Jan 18 21:01:37 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241280K/262144K available (10633K kernel code, 1424K rwdata, 2832K rodata, 464K init, 340K bss, 20864K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42188 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000204] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000703] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.006066] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.014761] Console: colour dummy device 80x30 [ 0.016693] Calibrating delay loop... 611.94 BogoMIPS (lpj=3059712) [ 0.119038] CPU: Testing write buffer coherency: ok [ 0.120762] pid_max: default: 32768 minimum: 301 [ 0.122437] LSM: initializing lsm=capability,landlock,integrity [ 0.123151] landlock: Up and running. [ 0.126945] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.127028] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.180932] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.181711] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.182670] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.183929] Setting up static identity map for 0x8400 - 0x8458 [ 0.185768] rcu: Hierarchical SRCU implementation. [ 0.185841] rcu: Max phase no-delay instances is 1000. [ 0.203832] devtmpfs: initialized [ 0.223460] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.225136] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.225298] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.237717] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.244390] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.265546] platform vga: Fixed dependency cycle(s) with /bridge/ports/port@1/endpoint [ 0.284583] amba 10120000.display: Fixed dependency cycle(s) with /bridge/ports/port@0/endpoint [ 0.291752] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000/port@0/endpoint@0 [ 0.298655] Serial: AMBA PL011 UART driver [ 0.309349] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.310958] printk: console [ttyAMA0] enabled [ 0.346069] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.349778] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.352471] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.354485] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.361872] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.739061] raid6: int32x8 gen() 71 MB/s [ 1.078899] raid6: int32x4 gen() 136 MB/s [ 1.418886] raid6: int32x2 gen() 402 MB/s [ 1.758842] raid6: int32x1 gen() 431 MB/s [ 1.759298] raid6: using algorithm int32x1 gen() 431 MB/s [ 2.098985] raid6: .... xor() 214 MB/s, rmw enabled [ 2.099547] raid6: using intx1 recovery algorithm [ 2.104369] SCSI subsystem initialized [ 2.106472] usbcore: registered new interface driver usbfs [ 2.107251] usbcore: registered new interface driver hub [ 2.107939] usbcore: registered new device driver usb [ 2.124728] pps_core: LinuxPPS API ver. 1 registered [ 2.125164] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.125873] PTP clock support registered [ 2.131743] Advanced Linux Sound Architecture Driver Initialized. [ 2.162525] vgaarb: loaded [ 2.166187] clocksource: Switched to clocksource arm,sp804 [ 2.301311] NET: Registered PF_INET protocol family [ 2.303803] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.315218] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.316204] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.316827] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.317418] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.318115] TCP: Hash tables configured (established 2048 bind 2048) [ 2.320124] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.320830] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.323573] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.329404] RPC: Registered named UNIX socket transport module. [ 2.329961] RPC: Registered udp transport module. [ 2.330288] RPC: Registered tcp transport module. [ 2.330602] RPC: Registered tcp-with-tls transport module. [ 2.330944] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.331529] PCI: CLS 0 bytes, default 32 [ 2.336878] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.346984] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.353555] NFS: Registering the id_resolver key type [ 2.355544] Key type id_resolver registered [ 2.355888] Key type id_legacy registered [ 2.362405] Key type cifs.idmap registered [ 2.609116] xor: measuring software checksum speed [ 2.620882] arm4regs : 911 MB/sec [ 2.630022] 8regs : 1173 MB/sec [ 2.640107] 32regs : 1104 MB/sec [ 2.640550] xor: using function: 8regs (1173 MB/sec) [ 2.641803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.642474] io scheduler mq-deadline registered [ 2.642890] io scheduler kyber registered [ 2.643648] io scheduler bfq registered [ 2.650904] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 2.652959] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 2.655021] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 2.657276] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 2.659072] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 2.660303] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 2.661439] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 2.662069] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 2.663947] versatile-pci 10001000.pci: PCI core found (slot 11) [ 2.666914] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 2.667623] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.668376] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.668829] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 2.669356] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 2.672249] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 2.673619] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 2.674133] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 2.674569] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 2.679456] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 2.679949] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 2.680422] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.680933] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.682117] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 2.682574] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 2.682976] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.684096] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 2.684532] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.685649] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 2.686395] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.687715] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 2.688153] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 2.688547] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.690647] PCI: bus0: Fast back to back transfers disabled [ 2.692583] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 2.693294] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 2.693987] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 2.694540] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 2.695036] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 2.695562] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 2.696345] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 2.696840] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 2.697316] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.697939] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 2.698362] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 2.698757] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 2.700916] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 2.704158] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 2.705684] clcd-pl11x: probe of 10120000.display failed with error -2 [ 2.709233] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 2.712662] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 2.714381] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 2.717598] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 2.720938] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.742198] random: crng init done [ 2.745796] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 2.747834] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.747909] [drm] features: -context_init [ 2.749805] [drm] number of scanouts: 1 [ 2.750152] [drm] number of cap sets: 0 [ 2.768283] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 2.917275] Console: switching to colour frame buffer device 160x50 [ 2.949729] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.966767] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 2.969511] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.039352] brd: module loaded [ 3.040505] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 3.053929] virtio_blk virtio3: [vda] 948754 512-byte logical blocks (486 MB/463 MiB) [ 3.076901] physmap-flash 34000000.flash: versatile/realview flash protection [ 3.091298] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 3.094648] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 3.095930] Intel/Sharp Extended Query Table at 0x0031 [ 3.097400] Using buffer write method [ 3.143546] smc91x: not found (-19). [ 3.144662] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 3.145361] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 3.184654] rtc-ds1307 0-0068: registered as rtc0 [ 3.194427] rtc-ds1307 0-0068: setting system clock to 2024-02-02T23:04:31 UTC (1706915071) [ 3.202698] rtc-pl031 101e8000.rtc: registered as rtc1 [ 3.204145] i2c_dev: i2c /dev entries driver [ 3.205680] versatile reboot driver registered [ 3.210534] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.219970] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 3.229924] leds-syscon 10000008.0.led: registered LED (null) [ 3.231892] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 3.238123] leds-syscon 10000008.1.led: registered LED (null) [ 3.239317] leds-syscon 10000008.2.led: registered LED (null) [ 3.240282] leds-syscon 10000008.3.led: registered LED (null) [ 3.241193] leds-syscon 10000008.4.led: registered LED (null) [ 3.242091] leds-syscon 10000008.5.led: registered LED (null) [ 3.243026] leds-syscon 10000008.6.led: registered LED (null) [ 3.243941] leds-syscon 10000008.7.led: registered LED (null) [ 3.245525] ledtrig-cpu: registered to indicate activity on CPUs [ 3.251491] usbcore: registered new interface driver usbhid [ 3.251956] usbhid: USB HID core driver [ 3.278730] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.310439] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.311084] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.312879] u32 classifier [ 3.313109] input device check on [ 3.313366] Actions configured [ 3.315382] NET: Registered PF_INET6 protocol family [ 3.328908] Segment Routing with IPv6 [ 3.329561] In-situ OAM (IOAM) with IPv6 [ 3.330837] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.335633] NET: Registered PF_PACKET protocol family [ 3.337086] Bridge firewalling registered [ 3.338722] Key type dns_resolver registered [ 3.340127] NET: Registered PF_VSOCK protocol family [ 3.394703] registered taskstats version 1 [ 3.441033] Key type .fscrypt registered [ 3.441452] Key type fscrypt-provisioning registered [ 3.451600] Btrfs loaded, zoned=no, fsverity=no [ 3.463678] Key type encrypted registered [ 3.474897] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.475570] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.477879] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.484402] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.485110] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.489080] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.491377] printk: console [netcon0] enabled [ 3.491841] netconsole: network logging started [ 3.935221] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 3.944752] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.950769] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.960645] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.060224] IP-Config: Complete: [ 4.061183] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 4.063584] host=192.168.7.4, domain=, nis-domain=(none) [ 4.064775] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.064940] nameserver0=8.8.8.8 [ 4.079559] clk: Disabling unused clocks [ 4.081169] ALSA device list: [ 4.081949] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.094519] md: Waiting for all devices to be available before autodetect [ 4.095692] md: If you don't use raid, use raid=noautodetect [ 4.105611] md: Autodetecting RAID arrays. [ 4.107334] md: autorun ... [ 4.108016] md: ... autorun DONE. [ 4.261085] EXT4-fs (vda): mounted filesystem 1249262b-fe82-4b41-ae68-a6915c3f484f r/w with ordered data mode. Quota mode: disabled. [ 4.263480] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.268886] devtmpfs: mounted [ 4.335589] Freeing unused kernel image (initmem) memory: 464K [ 4.336601] Kernel memory protection not selected by kernel config. [ 4.337541] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 7.605759] udevd[96]: starting version 3.2.14 [ 7.840372] udevd[97]: starting eudev-3.2.14 [ 14.570212] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 14.707767] clcd-pl11x: probe of 10120000.display failed with error -2 [ 14.849094] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 15.002026] amba 10100000.smc: deferred probe pending [ 15.086664] amba 10110000.mpmc: deferred probe pending [ 15.092959] amba 101e0000.sctl: deferred probe pending [ 15.256992] amba 101e1000.watchdog: deferred probe pending [ 15.336857] amba 101f0000.sci: deferred probe pending [ 15.343151] amba 101f4000.spi: deferred probe pending [ 15.498412] amba 1000a000.sci: deferred probe pending [ 15.504532] amba 10120000.display: deferred probe pending [ 26.038387] EXT4-fs (vda): re-mounted 1249262b-fe82-4b41-ae68-a6915c3f484f r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.10/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.10/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.12-yocto-standard #1 PREEMPT Thu Jan 18 21:01:37 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 2 23:05:05 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-cbbba3937e34fdd7b5960bfee1d1ffbf2ac15743 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-PJPC5mwZpN,guid=8d3d729be05898b06f6b397a65bd7532 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused [settings daemon] Forking. run with -n to prevent fork Matchbox: error parsing /usr/share/themes/Sato/matchbox/theme.xml Error loading resource from dbus-daemon[531]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=512 comm="connman-applet") dbus-daemon[531]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry