[ 1.135087] arm64_neon : 8353 MB/sec [ 1.137927] xor: using function: 32regs (11675 MB/sec) [ 1.140963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.145454] io scheduler mq-deadline registered [ 1.148070] io scheduler kyber registered [ 1.150921] pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges: [ 1.155816] pci-host-generic 4010000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 1.161121] pci-host-generic 4010000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 1.166613] pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000 [ 1.172038] pci-host-generic 4010000000.pcie: Memory resource size exceeds max for 32 bits [ 1.177231] pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff] [ 1.182832] pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00 [ 1.187674] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.190936] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.194609] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 1.198658] pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff] [ 1.203011] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 1.207387] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 1.211178] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 1.214578] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 1.218902] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.223303] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.227769] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 1.230874] pci 0000:00:02.0: reg 0x10: [io 0x0000-0x001f] [ 1.233950] pci 0000:00:02.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 1.237038] pci 0000:00:02.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.241767] pci 0000:00:03.0: [1af4:1001] type 00 class 0x010000 [ 1.247893] pci 0000:00:03.0: reg 0x10: [io 0x0000-0x007f] [ 1.250283] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 1.253371] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.257380] pci 0000:00:04.0: [1b36:000d] type 00 class 0x0c0330 [ 1.260193] pci 0000:00:04.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 1.264218] pci 0000:00:05.0: [1af4:1003] type 00 class 0x078000 [ 1.267388] pci 0000:00:05.0: reg 0x10: [io 0x0000-0x003f] [ 1.270040] pci 0000:00:05.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 1.273088] pci 0000:00:05.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.277439] pci 0000:00:06.0: [1af4:1050] type 00 class 0x038000 [ 1.280338] pci 0000:00:06.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 1.283915] pci 0000:00:06.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.288230] pci 0000:00:01.0: BAR 6: assigned [mem 0x10000000-0x1003ffff pref] [ 1.291728] pci 0000:00:01.0: BAR 4: assigned [mem 0x8000000000-0x8000003fff 64bit pref] [ 1.295442] pci 0000:00:02.0: BAR 4: assigned [mem 0x8000004000-0x8000007fff 64bit pref] [ 1.299059] pci 0000:00:03.0: BAR 4: assigned [mem 0x8000008000-0x800000bfff 64bit pref] [ 1.302781] pci 0000:00:04.0: BAR 0: assigned [mem 0x800000c000-0x800000ffff 64bit] [ 1.306401] pci 0000:00:05.0: BAR 4: assigned [mem 0x8000010000-0x8000013fff 64bit pref] [ 1.310234] pci 0000:00:06.0: BAR 4: assigned [mem 0x8000014000-0x8000017fff 64bit pref] [ 1.314486] pci 0000:00:01.0: BAR 1: assigned [mem 0x10040000-0x10040fff] [ 1.318337] pci 0000:00:02.0: BAR 1: assigned [mem 0x10041000-0x10041fff] [ 1.322093] pci 0000:00:03.0: BAR 1: assigned [mem 0x10042000-0x10042fff] [ 1.326047] pci 0000:00:05.0: BAR 1: assigned [mem 0x10043000-0x10043fff] [ 1.329890] pci 0000:00:06.0: BAR 1: assigned [mem 0x10044000-0x10044fff] [ 1.333047] pci 0000:00:03.0: BAR 0: assigned [io 0x1000-0x107f] [ 1.336092] pci 0000:00:05.0: BAR 0: assigned [io 0x1080-0x10bf] [ 1.338927] pci 0000:00:01.0: BAR 0: assigned [io 0x10c0-0x10df] [ 1.341808] pci 0000:00:02.0: BAR 0: assigned [io 0x10e0-0x10ff] [ 1.344957] pci 0000:00:04.0: enabling device (0000 -> 0002) [ 1.351503] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) [ 1.359087] virtio-pci 0000:00:02.0: enabling device (0000 -> 0003) [ 1.367395] virtio-pci 0000:00:03.0: enabling device (0000 -> 0003) [ 1.375573] virtio-pci 0000:00:05.0: enabling device (0000 -> 0003) [ 1.383950] virtio-pci 0000:00:06.0: enabling device (0000 -> 0002) [ 1.459469] [drm] pci: virtio-gpu-pci detected at 0000:00:06.0 [ 1.459589] printk: console [hvc0] enabled [ 1.465515] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.495285] [drm] features: -context_init [ 1.521702] [drm] number of scanouts: 1 [ 1.525038] [drm] number of cap sets: 0 [ 1.529104] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:06.0 on minor 0 [ 1.623087] Console: switching to colour frame buffer device 160x50 [ 1.637276] virtio-pci 0000:00:06.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.677422] brd: module loaded [ 1.679891] virtio_blk virtio2: 4/0/0 default/read/poll queues [ 1.686041] virtio_blk virtio2: [vda] 900216 512-byte logical blocks (461 MB/440 MiB) [ 1.704389] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 1.708387] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 [ 1.714279] xhci_hcd 0000:00:04.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 1.724919] xhci_hcd 0000:00:04.0: xHCI Host Controller [ 1.730552] xhci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2 [ 1.735998] xhci_hcd 0000:00:04.0: Host supports USB 3.0 SuperSpeed [ 1.741461] hub 1-0:1.0: USB hub found [ 1.744260] hub 1-0:1.0: 4 ports detected [ 1.748607] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.757722] hub 2-0:1.0: USB hub found [ 1.763436] hub 2-0:1.0: 4 ports detected [ 1.770871] rtc-pl031 9010000.pl031: registered as rtc0 [ 1.774266] rtc-pl031 9010000.pl031: setting system clock to 2024-02-05T05:51:01 UTC (1707112261) [ 1.781018] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 1.786138] usbcore: registered new interface driver usbhid [ 1.788949] usbhid: USB HID core driver [ 1.792035] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available [ 1.797000] u32 classifier [ 1.798644] input device check on [ 1.800503] Actions configured [ 1.803246] NET: Registered PF_INET6 protocol family [ 1.825829] Segment Routing with IPv6 [ 1.827978] In-situ OAM (IOAM) with IPv6 [ 1.830277] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.833698] NET: Registered PF_PACKET protocol family [ 1.836467] Bridge firewalling registered [ 1.839014] Key type dns_resolver registered [ 1.841635] NET: Registered PF_VSOCK protocol family [ 1.847279] registered taskstats version 1 [ 1.854397] Key type .fscrypt registered [ 1.856672] Key type fscrypt-provisioning registered [ 1.859883] Btrfs loaded, zoned=no, fsverity=no [ 1.866037] Key type encrypted registered [ 1.868900] printk: console [netcon0] enabled [ 1.871501] netconsole: network logging started [ 1.897282] IP-Config: Complete: [ 1.899663] device=eth0, hwaddr=52:54:00:12:34:18, ipaddr=192.168.7.24, mask=255.255.255.0, gw=192.168.7.23 [ 1.905540] host=192.168.7.24, domain=, nis-domain=(none) [ 1.908667] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.908674] nameserver0=8.8.8.8 [ 1.915194] clk: Disabling unused clocks [ 1.927618] md: Waiting for all devices to be available before autodetect [ 1.931934] md: If you don't use raid, use raid=noautodetect [ 1.936423] md: Autodetecting RAID arrays. [ 1.938701] md: autorun ... [ 1.940174] md: ... autorun DONE. [ 1.981824] EXT4-fs (vda): mounted filesystem 74f43c6d-5afe-47ac-af4c-37d20550e2bc r/w with ordered data mode. Quota mode: disabled. [ 1.991696] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.995635] devtmpfs: mounted [ 2.004094] Freeing unused kernel memory: 4544K [ 2.007183] Run /sbin/init as init process [ 2.013720] usb 1-1: new high-speed USB device number 2 using xhci_hcd INIT: version 3.04 booting Starting udev [ 2.187095] udevd[114]: starting version 3.2.14 [ 2.200151] input: QEMU QEMU USB Tablet as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 2.211296] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:04.0-1/input0 [ 2.233057] udevd[116]: starting eudev-3.2.14 [ 2.357287] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 2.523550] input: QEMU QEMU USB Keyboard as /devices/platform/4010000000.pcie/pci0000:00/0000:00:04.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 2.601564] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:04.0-2/input0 [ 2.769426] EXT4-fs (vda): re-mounted 74f43c6d-5afe-47ac-af4c-37d20550e2bc r/w. Quota mode: disabled. INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting OpenBSD Secure Shell server: sshd generating ssh RSA host key... generating ssh ECDSA host key... generating ssh ED25519 host key... done. Starting syslogd/klogd: done Poky (Yocto Project Reference Distro) 4.3+snapshot-10ff8d47a9efd710c73033b610b5282b0c8b54da qemuarm64 /dev/hvc0 qemuarm64 login: [ 32.799064] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 32.805801] scsi host0: scsi_debug: version 0191 [20210520] [ 32.805801] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 32.815310] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 32.822986] scsi 0:0:0:0: Power-on or device reset occurred [ 32.858176] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 32.869170] sd 0:0:0:0: [sda] Write Protect is off [ 32.881853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 32.904787] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 32.909384] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 32.975667] sd 0:0:0:0: [sda] Attached SCSI disk [ 34.717420] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 34.919440] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 34.926360] scsi host0: scsi_debug: version 0191 [20210520] [ 34.926360] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 34.943207] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 34.947709] scsi 0:0:0:0: Power-on or device reset occurred [ 34.976860] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 34.990743] sd 0:0:0:0: [sda] Write Protect is off [ 35.007333] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 35.029180] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 35.033408] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 35.078926] sd 0:0:0:0: [sda] Attached SCSI disk [ 35.391188] sda: [ 36.469432] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 36.725528] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 36.732556] scsi host0: scsi_debug: version 0191 [20210520] [ 36.732556] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 36.738953] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 36.744461] scsi 0:0:0:0: Power-on or device reset occurred [ 36.773434] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 36.782978] sd 0:0:0:0: [sda] Write Protect is off [ 36.796851] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 36.823199] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 36.833266] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 36.882504] sd 0:0:0:0: [sda] Attached SCSI disk [ 37.672389] EXT4-fs (sda): mounting ext2 file system using the ext4 subsystem [ 37.703012] EXT4-fs (sda): mounted filesystem 9c1f209f-a17b-4349-90be-bb59c783d84c r/w without journal. Quota mode: disabled. [ 37.858391] EXT4-fs (sda): unmounting filesystem 9c1f209f-a17b-4349-90be-bb59c783d84c. [ 38.135233] sda: sda1 [ 39.298239] udevd[2603]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 39.298271] udevd[2604]: inotify_add_watch(6, /dev/sda2, 10) failed: No such file or directory [ 39.299789] udevd[2603]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 39.310228] udevd[2604]: inotify_add_watch(6, /dev/sda2, 10) failed: No such file or directory [ 39.325982] udevd[2603]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 39.328950] udevd[2604]: inotify_add_watch(6, /dev/sda2, 10) failed: No such file or directory [ 39.393391] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 39.551088] loop: module loaded [ 39.556134] loop0: detected capacity change from 0 to 2048000 [ 39.743134] udevd[2868]: inotify_add_watch(6, /dev/loop0p2, 10) failed: No such file or directory [ 39.759452] udevd[2603]: inotify_add_watch(6, /dev/loop0p1, 10) failed: No such file or directory [ 39.759677] udevd[2868]: inotify_add_watch(6, /dev/loop0p2, 10) failed: No such file or directory [ 39.762342] udevd[2603]: inotify_add_watch(6, /dev/loop0p1, 10) failed: No such file or directory [ 40.330173] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 40.347871] scsi host0: scsi_debug: version 0191 [20210520] [ 40.347871] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 40.358571] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 40.371252] scsi 0:0:0:0: Power-on or device reset occurred [ 40.401719] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 40.410350] sd 0:0:0:0: [sda] Write Protect is off [ 40.421606] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 40.439190] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 40.458120] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 40.506568] sd 0:0:0:0: [sda] Attached SCSI disk [ 40.869115] sda: sda1 [ 41.690552] sda: [ 43.409588] sda: sda1 [ 43.789639] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 44.555086] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 44.566448] scsi host0: scsi_debug: version 0191 [20210520] [ 44.566448] dev_size_mb=1, opts=0x0, submit_queues=1, statistics=0 [ 44.581900] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 44.587009] scsi 0:0:0:0: Power-on or device reset occurred [ 44.611472] sd 0:0:0:0: [sda] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) [ 44.630826] sd 0:0:0:0: [sda] Write Protect is off [ 44.656822] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 44.676610] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 44.681842] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 44.733725] sd 0:0:0:0: [sda] Attached SCSI disk [ 44.981996] sda: [ 45.317444] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 45.483341] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 45.489788] scsi host0: scsi_debug: version 0191 [20210520] [ 45.489788] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 45.498209] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 45.503667] scsi 0:0:0:0: Power-on or device reset occurred [ 45.543149] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 45.552462] sd 0:0:0:0: [sda] Write Protect is off [ 45.564708] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 45.581584] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 45.585173] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 45.630830] sd 0:0:0:0: [sda] Attached SCSI disk [ 45.938496] sda: [ 46.345387] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 47.106994] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 47.115628] scsi host0: scsi_debug: version 0191 [20210520] [ 47.115628] dev_size_mb=267, opts=0x0, submit_queues=1, statistics=0 [ 47.149764] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 47.166039] scsi 0:0:0:0: Power-on or device reset occurred [ 47.217455] sd 0:0:0:0: [sda] 546816 512-byte logical blocks: (280 MB/267 MiB) [ 47.228932] sd 0:0:0:0: [sda] Write Protect is off [ 47.241660] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 47.266668] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 47.276179] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 47.327767] sd 0:0:0:0: [sda] Attached SCSI disk [ 47.746470] sda: [ 58.648431] hrtimer: interrupt took 13650 ns [ 86.392041] sda: [ 86.681340] sda: sda1 [ 126.324219] sda: [ 126.677484] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 126.887746] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 126.900718] scsi host0: scsi_debug: version 0191 [20210520] [ 126.900718] dev_size_mb=5, opts=0x0, submit_queues=1, statistics=0 [ 126.917026] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 126.936402] scsi 0:0:0:0: Power-on or device reset occurred [ 126.974046] sd 0:0:0:0: [sda] 10240 512-byte logical blocks: (5.24 MB/5.00 MiB) [ 126.992894] sd 0:0:0:0: [sda] Write Protect is off [ 127.004336] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 127.038862] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 127.056517] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 127.111188] sd 0:0:0:0: [sda] Attached SCSI disk [ 127.434440] sda: [ 129.211384] EXT4-fs (sda1): mounted filesystem 48a4d2b1-516e-4e27-b4cd-3f6e29f0c333 r/w without journal. Quota mode: disabled. [ 129.433391] EXT4-fs (sda1): unmounting filesystem 48a4d2b1-516e-4e27-b4cd-3f6e29f0c333. [ 129.840766] sda: [ 130.193390] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 130.377141] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 130.383742] scsi host0: scsi_debug: version 0191 [20210520] [ 130.383742] dev_size_mb=10, opts=0x0, submit_queues=1, statistics=0 [ 130.391674] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 130.396353] scsi 0:0:0:0: Power-on or device reset occurred [ 130.423558] sd 0:0:0:0: [sda] 20480 512-byte logical blocks: (10.5 MB/10.0 MiB) [ 130.433142] sd 0:0:0:0: [sda] Write Protect is off [ 130.444723] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 130.463793] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 130.468303] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 130.517400] sd 0:0:0:0: [sda] Attached SCSI disk [ 130.886701] sda: sda1 [ 132.697438] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 132.852609] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 132.857300] scsi host0: scsi_debug: version 0191 [20210520] [ 132.857300] dev_size_mb=25, opts=0x0, submit_queues=1, statistics=0 [ 132.868712] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 132.872815] scsi 0:0:0:0: Power-on or device reset occurred [ 132.899752] sd 0:0:0:0: [sda] 51200 512-byte logical blocks: (26.2 MB/25.0 MiB) [ 132.912855] sd 0:0:0:0: [sda] Write Protect is off [ 132.923035] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 132.945616] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 132.950887] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 133.001989] sd 0:0:0:0: [sda] Attached SCSI disk [ 133.427808] sda: sda1 [ 136.873449] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 143.466150] loop0: detected capacity change from 0 to 2048000 [ 143.574165] udevd[6475]: inotify_add_watch(6, /dev/loop0p1, 10) failed: No such file or directory [ 143.715306] loop0: detected capacity change from 0 to 2048000 [ 143.844728] udevd[6475]: inotify_add_watch(6, /dev/loop0p1, 10) failed: No such file or directory [ 144.013447] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 144.022408] scsi host0: scsi_debug: version 0191 [20210520] [ 144.022408] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 [ 144.045450] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 144.052012] scsi 0:0:0:0: Power-on or device reset occurred [ 144.093004] sd 0:0:0:0: [sda] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB) [ 144.106567] sd 0:0:0:0: [sda] Write Protect is off [ 144.118427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 144.135578] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 144.138577] sd 0:0:0:0: [sda] Optimal transfer size 262144 bytes [ 144.179199] sd 0:0:0:0: [sda] Attached SCSI disk [ 144.513010] sda: [ 144.833415] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 145.005762] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 145.014758] scsi host0: scsi_debug: version 0191 [20210520] [ 145.014758] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 [ 145.045322] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 145.049533] scsi 0:0:0:0: Power-on or device reset occurred [ 145.082570] sd 0:0:0:0: [sda] physical block alignment offset: 3584 [ 145.085889] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB) [ 145.092894] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 145.099820] sd 0:0:0:0: [sda] Write Protect is off [ 145.117486] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 145.133596] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 145.140799] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 145.191906] sda: sda1 sda2 sda3 sda4 [ 145.199067] sd 0:0:0:0: [sda] Attached SCSI disk [ 145.605596] sda: sda1 sda2 sda3 sda4 [ 145.873506] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 147.034992] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 147.045403] scsi host0: scsi_debug: version 0191 [20210520] [ 147.045403] dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0 [ 147.062111] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 147.067232] scsi 0:0:0:0: Power-on or device reset occurred [ 147.100529] sd 0:0:0:0: [sda] physical block alignment offset: 3584 [ 147.105122] sd 0:0:0:0: [sda] 16384 512-byte logical blocks: (8.39 MB/8.00 MiB) [ 147.109866] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 147.121144] sd 0:0:0:0: [sda] Write Protect is off [ 147.132718] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 147.150806] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 147.155080] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 147.203829] sd 0:0:0:0: [sda] Attached SCSI disk [ 147.559355] sda: [ 148.054639] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 148.066648] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 148.289635] sda: sda1 [ 148.662288] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 148.673047] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 148.874463] sda: sda1 [ 149.312017] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 149.319576] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 149.899204] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 149.903712] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 150.087416] sda: sda1 [ 150.528919] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 150.535695] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 150.738314] sda: sda1 [ 151.177327] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 151.184047] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 151.374851] sda: sda1 [ 151.997695] sda: sda1 [ 152.657968] sda: sda1 [ 153.275230] sda: sda1 [ 153.716599] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 153.728911] udevd[6604]: inotify_add_watch(6, /dev/sda1, 10) failed: No such file or directory [ 153.801500] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 153.992810] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 154.007849] scsi host0: scsi_debug: version 0191 [20210520] [ 154.007849] dev_size_mb=1, opts=0x0, submit_queues=1, statistics=0 [ 154.029553] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 154.035736] scsi 0:0:0:0: Power-on or device reset occurred [ 154.070474] sd 0:0:0:0: [sda] 2048 512-byte logical blocks: (1.05 MB/1.00 MiB) [ 154.080472] sd 0:0:0:0: [sda] Write Protect is off [ 154.092310] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 154.110863] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 154.115392] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 154.163777] sd 0:0:0:0: [sda] Attached SCSI disk [ 169.673530] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 169.843225] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 169.848306] scsi host0: scsi_debug: version 0191 [20210520] [ 169.848306] dev_size_mb=6, opts=0x0, submit_queues=1, statistics=0 [ 169.854508] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 169.863083] scsi 0:0:0:0: Power-on or device reset occurred [ 169.887065] sd 0:0:0:0: [sda] 12288 512-byte logical blocks: (6.29 MB/6.00 MiB) [ 169.896151] sd 0:0:0:0: [sda] Write Protect is off [ 169.908832] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 169.926272] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 169.930569] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 169.984990] sd 0:0:0:0: [sda] Attached SCSI disk [ 170.357108] sda: [ 175.668096] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 [ 176.386995] EXT4-fs (sda14): mounting ext2 file system using the ext4 subsystem [ 176.405410] EXT4-fs (sda14): mounted filesystem f479ad30-bf2d-4524-a959-11313c330d50 r/w without journal. Quota mode: disabled. [ 176.911923] EXT4-fs (sda15): mounting ext2 file system using the ext4 subsystem [ 176.929393] EXT4-fs (sda15): mounted filesystem c925ae88-0834-4904-91a5-70162e1b2f11 r/w without journal. Quota mode: disabled. [ 177.433076] EXT4-fs (sda16): mounting ext2 file system using the ext4 subsystem [ 177.452085] EXT4-fs (sda16): mounted filesystem 7f56578a-017a-464c-b46b-b03ad0772609 r/w without journal. Quota mode: disabled. [ 177.966709] EXT4-fs (sda14): unmounting filesystem f479ad30-bf2d-4524-a959-11313c330d50. [ 178.027362] EXT4-fs (sda15): unmounting filesystem c925ae88-0834-4904-91a5-70162e1b2f11. [ 178.087599] EXT4-fs (sda16): unmounting filesystem 7f56578a-017a-464c-b46b-b03ad0772609. [ 178.149397] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 178.337823] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 178.343695] scsi host0: scsi_debug: version 0191 [20210520] [ 178.343695] dev_size_mb=9, opts=0x0, submit_queues=1, statistics=0 [ 178.363752] scsi 0:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 178.370195] scsi 0:0:0:0: Power-on or device reset occurred [ 178.405611] sd 0:0:0:0: [sda] 18432 512-byte logical blocks: (9.44 MB/9.00 MiB) [ 178.414312] sd 0:0:0:0: [sda] Write Protect is off [ 178.426931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 178.444652] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes [ 178.450381] sd 0:0:0:0: [sda] Optimal transfer size 32768 bytes [ 178.497920] sd 0:0:0:0: [sda] Attached SCSI disk [ 178.868964] sda: sda1 < > [ 224.136708] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36 sda37 sda38 sda39 sda40 sda41 sda42 sda43 sda44 sda45 sda46 sda47 sda48 sda49 sda50 sda51 sda52 sda53 sda54 sda55 sda56 sda57 sda58 sda59 sda60 sda61 sda62 sda63 sda64 > [ 225.891757] sda: sda1 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26 sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35 sda36 sda37 sda38 sda39 sda40 sda41 sda42 sda43 sda44 sda45 sda46 sda47 sda48 sda49 sda50 sda51 sda52 sda53 sda54 sda55 sda56 sda57 sda58 sda59 sda60 sda61 sda62 sda63 sda64 > [ 226.617541] sd 0:0:0:0: [sda] Synchronizing SCSI cache