[ 0.000000] Linux version 6.6.12-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231126) #1 SMP PREEMPT_DYNAMIC Thu Jan 18 21:01:37 UTC 2024 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 414181470 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000005] tsc: Detected 2599.988 MHz processor [ 0.000997] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001016] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001019] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004769] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.004872] ACPI: Early table checksum verification disabled [ 0.004875] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS ) [ 0.004885] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004891] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004896] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004899] ACPI: FACS 0x000000001FFE0000 000040 [ 0.004901] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004903] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004906] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004909] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004911] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a] [ 0.004912] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216] [ 0.004913] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.004914] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a] [ 0.004915] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2] [ 0.004916] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e] [ 0.004916] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436] [ 0.004966] Zone ranges: [ 0.004967] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004969] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.004970] Normal empty [ 0.004971] Movable zone start for each node [ 0.004972] Early memory node ranges [ 0.004972] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004974] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.004975] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.005372] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.005388] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.007068] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.010506] ACPI: PM-Timer IO Port: 0x608 [ 0.010522] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.010560] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.010564] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.010567] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.010568] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.010570] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.010571] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.010576] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.010578] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.010582] TSC deadline timer available [ 0.010583] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.010601] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.010622] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.010624] Booting paravirtualized kernel on KVM [ 0.010626] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.010633] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.011314] percpu: Embedded 56 pages/cpu s190568 r8192 d30616 u524288 [ 0.011349] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.011449] random: crng init done [ 0.011530] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.011576] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.011650] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.012259] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.014124] Memory: 477740K/523736K available (18432K kernel code, 2315K rwdata, 5236K rodata, 3380K init, 2320K bss, 45736K reserved, 0K cma-reserved) [ 0.014181] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.014190] Kernel/User page tables isolation: enabled [ 0.014217] ftrace: allocating 50943 entries in 199 pages [ 0.023397] ftrace: allocated 199 pages with 5 groups [ 0.023457] Dynamic Preempt: full [ 0.023882] rcu: Preemptible hierarchical RCU implementation. [ 0.023883] rcu: RCU event tracing is enabled. [ 0.023883] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.023885] All grace periods are expedited (rcu_expedited). [ 0.023885] Trampoline variant of Tasks RCU enabled. [ 0.023885] Rude variant of Tasks RCU enabled. [ 0.023886] Tracing variant of Tasks RCU enabled. [ 0.023886] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.023887] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.027422] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.027617] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.027717] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.030831] Console: colour VGA+ 80x25 [ 0.030866] printk: console [ttyS0] enabled [ 0.094637] ACPI: Core revision 20230628 [ 0.095203] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.096249] APIC: Switch to symmetric I/O mode setup [ 0.096887] x2apic enabled [ 0.097371] APIC: Switched APIC routing to: physical x2apic [ 0.098566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.099257] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a30e14db, max_idle_ns: 440795278188 ns [ 0.101366] Calibrating delay loop (skipped) preset value.. 5199.97 BogoMIPS (lpj=2599988) [ 0.102447] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.103049] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.103368] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.104368] Spectre V2 : Mitigation: Retpolines [ 0.104848] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.105367] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.106367] Speculative Store Bypass: Vulnerable [ 0.106864] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.107367] MMIO Stale Data: Unknown: No mitigations [ 0.108367] SRBDS: Unknown: Dependent on hypervisor status [ 0.108953] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.109367] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.110367] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.111368] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.112033] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.132659] Freeing SMP alternatives memory: 52K [ 0.133223] pid_max: default: 32768 minimum: 301 [ 0.133390] LSM: initializing lsm=capability,landlock,integrity [ 0.134374] landlock: Up and running. [ 0.134818] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.135369] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.136626] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.137526] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.138363] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.139362] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.140214] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.140385] signal: max sigframe size: 1776 [ 0.140873] rcu: Hierarchical SRCU implementation. [ 0.141368] rcu: Max phase no-delay instances is 400. [ 0.142112] smp: Bringing up secondary CPUs ... [ 0.142469] smpboot: x86: Booting SMP configuration: [ 0.142998] .... node #0, CPUs: #1 #2 #3 [ 0.143388] smp: Brought up 1 node, 4 CPUs [ 0.144369] smpboot: Max logical packages: 1 [ 0.144872] smpboot: Total of 4 processors activated (20799.90 BogoMIPS) [ 0.145637] devtmpfs: initialized [ 0.145882] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.146373] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.147404] pinctrl core: initialized pinctrl subsystem [ 0.148665] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.149507] thermal_sys: Registered thermal governor 'step_wise' [ 0.149509] thermal_sys: Registered thermal governor 'user_space' [ 0.150212] cpuidle: using governor menu [ 0.150969] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.151370] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.152191] PCI: Using configuration type 1 for base access [ 0.152524] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.170369] raid6: sse2x4 gen() 15893 MB/s [ 0.187368] raid6: sse2x2 gen() 15250 MB/s [ 0.204368] raid6: sse2x1 gen() 11847 MB/s [ 0.204921] raid6: using algorithm sse2x4 gen() 15893 MB/s [ 0.222368] raid6: .... xor() 8716 MB/s, rmw enabled [ 0.222948] raid6: using ssse3x2 recovery algorithm [ 0.223440] ACPI: Added _OSI(Module Device) [ 0.223886] ACPI: Added _OSI(Processor Device) [ 0.224368] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.224861] ACPI: Added _OSI(Processor Aggregator Device) [ 0.226111] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.227397] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.228165] ACPI: Interpreter enabled [ 0.228380] ACPI: PM: (supports S0 S3 S5) [ 0.228811] ACPI: Using IOAPIC for interrupt routing [ 0.229351] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.229368] PCI: Using E820 reservations for host bridge windows [ 0.230108] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.231890] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.232372] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.233396] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.234097] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.234428] PCI host bridge to bus 0000:00 [ 0.234896] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.235369] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.236102] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.236369] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.237196] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.237369] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.238194] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.238420] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.239703] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.241369] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.243061] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.247058] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.248369] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.249776] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.251361] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.252891] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.256369] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.259422] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.262378] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.266384] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.269378] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.273378] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.274415] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.275707] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.278374] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.281373] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.289373] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.291430] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.294130] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.295136] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.297103] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.298188] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.300646] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.302242] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.302726] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.305437] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.306307] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.306524] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.310369] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.311369] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.312596] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.314676] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.316162] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.316427] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.317120] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.317423] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.318099] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.318422] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.319099] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.319422] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.320074] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.320376] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.321016] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.321376] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.322013] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.322383] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.323012] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.323376] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.324308] iommu: Default domain type: Translated [ 0.324369] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.325105] SCSI subsystem initialized [ 0.325418] ACPI: bus type USB registered [ 0.325831] usbcore: registered new interface driver usbfs [ 0.326376] usbcore: registered new interface driver hub [ 0.326932] usbcore: registered new device driver usb [ 0.327383] pps_core: LinuxPPS API ver. 1 registered [ 0.327901] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.328372] PTP clock support registered [ 0.328794] Bluetooth: Core ver 2.22 [ 0.329376] NET: Registered PF_BLUETOOTH protocol family [ 0.329920] Bluetooth: HCI device and connection manager initialized [ 0.330370] Bluetooth: HCI socket layer initialized [ 0.330879] Bluetooth: L2CAP socket layer initialized [ 0.331372] Bluetooth: SCO socket layer initialized [ 0.331923] PCI: Using ACPI for IRQ routing [ 0.362838] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.363062] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.363365] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.363373] vgaarb: loaded [ 0.363730] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.364251] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.367452] clocksource: Switched to clocksource kvm-clock [ 0.368551] pnp: PnP ACPI init [ 0.369049] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.370061] pnp: PnP ACPI: found 5 devices [ 1.283726] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.284796] NET: Registered PF_INET protocol family [ 1.285350] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.286283] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 1.287189] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.287985] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.288784] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.290268] TCP: Hash tables configured (established 4096 bind 4096) [ 1.290970] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.291650] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.292399] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.293228] RPC: Registered named UNIX socket transport module. [ 1.293869] RPC: Registered udp transport module. [ 1.294354] RPC: Registered tcp transport module. [ 1.294853] RPC: Registered tcp-with-tls transport module. [ 1.295420] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.296097] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 1.296745] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 1.297380] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 1.298092] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 1.298828] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 1.299534] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 1.300588] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 1.302010] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 1.303131] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 1.304216] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 1.305340] PCI: CLS 0 bytes, default 64 [ 1.305893] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 1.306852] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a30e14db, max_idle_ns: 440795278188 ns [ 1.308595] Initialise system trusted keyrings [ 1.309431] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 1.310305] NFS: Registering the id_resolver key type [ 1.310874] Key type id_resolver registered [ 1.311315] Key type id_legacy registered [ 1.311992] Key type cifs.idmap registered [ 1.325017] xor: automatically using best checksumming function avx [ 1.325765] Key type asymmetric registered [ 1.326188] Asymmetric key parser 'x509' registered [ 1.326715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.327480] io scheduler mq-deadline registered [ 1.327952] io scheduler kyber registered [ 1.328378] io scheduler bfq registered [ 1.329012] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.330818] ACPI: button: Power Button [PWRF] [ 1.332005] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 1.333519] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 1.334932] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 1.338208] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 1.340200] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.346183] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.347128] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.348885] Linux agpgart interface v0.103 [ 1.349454] ACPI: bus type drm_connector registered [ 1.350100] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 1.350815] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 1.352940] Console: switching to colour dummy device 80x25 [ 1.354263] [drm] features: -virgl +edid -resource_blob -host_visible [ 1.354266] [drm] features: -context_init [ 1.356162] [drm] number of scanouts: 1 [ 1.356669] [drm] number of cap sets: 0 [ 1.357477] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 1.363652] fbcon: virtio_gpudrmfb (fb0) is primary device [ 1.377575] Console: switching to colour frame buffer device 160x50 [ 1.393802] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 1.398598] brd: module loaded [ 1.401532] loop: module loaded [ 1.402500] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 1.405306] virtio_blk virtio3: [vda] 796238 512-byte logical blocks (408 MB/389 MiB) [ 1.422323] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.423253] ahci 0000:00:1f.2: flags: 64bit ncq only [ 1.424547] scsi host0: ahci [ 1.425065] scsi host1: ahci [ 1.425580] scsi host2: ahci [ 1.426070] scsi host3: ahci [ 1.426554] scsi host4: ahci [ 1.427081] scsi host5: ahci [ 1.427440] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 1.428223] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 1.429176] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 1.429935] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 1.430707] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 1.431469] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 1.437921] e100: Intel(R) PRO/100 Network Driver [ 1.438533] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.439150] e1000: Intel(R) PRO/1000 Network Driver [ 1.439673] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.440287] e1000e: Intel(R) PRO/1000 Network Driver [ 1.440817] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 1.441447] igb: Intel(R) Gigabit Ethernet Network Driver [ 1.442023] igb: Copyright (c) 2007-2014 Intel Corporation. [ 1.443689] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.444286] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.445152] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 1.445966] hub 1-0:1.0: USB hub found [ 1.446381] hub 1-0:1.0: 2 ports detected [ 1.447050] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.447987] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.448894] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 1.455810] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.456931] hub 2-0:1.0: USB hub found [ 1.457544] hub 2-0:1.0: 6 ports detected [ 1.479855] hub 1-0:1.0: USB hub found [ 1.480528] hub 1-0:1.0: 2 ports detected [ 1.481407] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.482112] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.483040] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 1.483882] hub 3-0:1.0: USB hub found [ 1.484315] hub 3-0:1.0: 2 ports detected [ 1.485450] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.486072] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.486991] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 1.487775] hub 4-0:1.0: USB hub found [ 1.488209] hub 4-0:1.0: 2 ports detected [ 1.488834] usbcore: registered new interface driver usb-storage [ 1.489503] usbcore: registered new interface driver usbserial_generic [ 1.490244] usbserial: USB Serial support registered for generic [ 1.490977] usbcore: registered new interface driver ftdi_sio [ 1.491602] usbserial: USB Serial support registered for FTDI USB Serial Device [ 1.492429] usbcore: registered new interface driver pl2303 [ 1.493029] usbserial: USB Serial support registered for pl2303 [ 1.493727] i8042: PNP: No PS/2 controller found. [ 1.494342] mousedev: PS/2 mouse device common for all mice [ 1.495071] rtc_cmos 00:03: RTC can wake from S4 [ 1.495938] rtc_cmos 00:03: registered as rtc0 [ 1.496476] rtc_cmos 00:03: setting system clock to 2024-02-05T07:29:05 UTC (1707118145) [ 1.497435] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 1.498503] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 1.498824] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 1.499617] intel_pstate: CPU model not supported [ 1.500326] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 1.500766] sdhci: Secure Digital Host Controller Interface driver [ 1.501415] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 1.502078] sdhci: Copyright(c) Pierre Ossman [ 1.503526] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.504411] usbcore: registered new interface driver usbhid [ 1.505012] usbhid: USB HID core driver [ 1.505468] u32 classifier [ 1.505770] input device check on [ 1.506172] Actions configured [ 1.506626] NET: Registered PF_INET6 protocol family [ 1.507510] Segment Routing with IPv6 [ 1.507931] In-situ OAM (IOAM) with IPv6 [ 1.508400] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.509141] NET: Registered PF_PACKET protocol family [ 1.509706] Bridge firewalling registered [ 1.510163] Key type dns_resolver registered [ 1.510715] NET: Registered PF_VSOCK protocol family [ 1.511885] IPI shorthand broadcast: enabled [ 1.514221] sched_clock: Marking stable (1443003673, 70741068)->(1689763685, -176018944) [ 1.515248] registered taskstats version 1 [ 1.515886] Loading compiled-in X.509 certificates [ 1.518172] Key type .fscrypt registered [ 1.518831] Key type fscrypt-provisioning registered [ 1.519980] Btrfs loaded, zoned=no, fsverity=no [ 1.521108] Key type encrypted registered [ 1.521941] printk: console [netcon0] enabled [ 1.522728] netconsole: network logging started [ 1.699774] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.743484] ata2: SATA link down (SStatus 0 SControl 300) [ 1.744531] ata1: SATA link down (SStatus 0 SControl 300) [ 1.745224] ata6: SATA link down (SStatus 0 SControl 300) [ 1.745925] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.746676] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.747290] ata3.00: applying bridge limits [ 1.747775] ata3.00: configured for UDMA/100 [ 1.748351] ata5: SATA link down (SStatus 0 SControl 300) [ 1.749294] ata4: SATA link down (SStatus 0 SControl 300) [ 1.750107] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.765974] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.766733] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.784773] IP-Config: Complete: [ 1.785350] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.786366] host=192.168.7.2, domain=, nis-domain=(none) [ 1.786976] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.786977] nameserver0=8.8.8.8 [ 1.788159] clk: Disabling unused clocks [ 1.788765] md: Waiting for all devices to be available before autodetect [ 1.789311] md: If you don't use raid, use raid=noautodetect [ 1.789766] md: Autodetecting RAID arrays. [ 1.790100] md: autorun ... [ 1.790326] md: ... autorun DONE. [ 1.794849] EXT4-fs (vda): mounted filesystem e7a52b45-dda9-413c-a6fd-76931b088cd8 r/w with ordered data mode. Quota mode: disabled. [ 1.795874] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.796456] devtmpfs: mounted [ 1.797758] Freeing unused kernel image (initmem) memory: 3380K [ 1.803784] Write protecting the kernel read-only data: 24576k [ 1.804619] Freeing unused kernel image (rodata/data gap) memory: 908K [ 1.805215] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled [ 1.840111] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.841717] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 1.874683] udevd[136]: starting version 3.2.14 [ 1.879216] udevd[137]: starting eudev-3.2.14 [ 1.956768] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 2.090443] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 2.144040] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 2.207752] EXT4-fs (vda): re-mounted e7a52b45-dda9-413c-a6fd-76931b088cd8 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seat.c:39] Created VT-bound seat seat0 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seatd.c:194] seatd started Starting Dropbear SSH server: [ 3.795134] weston[342]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set 00:00:00.125  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 342, uid: 1000, gid: 1000) 00:00:00.125  [c/debug/seatd/0.8.0/seatd/seat.c:170] Added client 2 to seat0 00:00:00.125  [c/debug/seatd/0.8.0/seatd/seat.c:480] Opened client 2 on seat0 Generating 2048 bit rsa key, this may take a while... could not load cursor 'dnd-move' could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' could not load cursor 'dnd-none' Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCq0ZYJuoYVrKBt5CV5YsCUEDGUiL9nJFj0r4wSyfvTaeDNZnMbWOGY7NFVddB1gOhAerTQfRc2RDVObAScRSd4UFsRu1t/mvb6IfkNpBqL8ZhsYTb/p7VX6x0LDyZVrmlQNLJ0Xtsq78kLXzN6dPcJQoFrvBVtTGbZt/57vAMm7LO3Wd5ETEbGS413gMTJyDMyokgT7kyywYpGnkKjbu4dUzHhRnukbvFtsqLp3KGU1RVcTrVLeoHZSa6MUqgMk9h3y6lCk4BNlRbbYGfE+qeYUgmDFOyzvM4+KC1923XFAA4OT38wq0aHNwLdZ75fqSHJ2azx3W4eahc45EUuCSW1 root@qemux86-64 Fingerprint: SHA256:HX/brGX7p4cEOFgt8YwybOMv3LHxADWtQ55gHMnPa+0 dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ 8.025752] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.026500] Bluetooth: BNEP filters: protocol multicast [ 8.027270] Bluetooth: BNEP socket layer initialized ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-b73804429ca04672232e52eaae3de089de99b18e qemux86-64 /dev/ttyS0 qemux86-64 login: 00:01:25.721  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 5947, uid: 0, gid: 0) 00:01:25.721  [c/debug/seatd/0.8.0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client 00:01:25.721  [c/debug/seatd/0.8.0/seatd/client.c:177] Could not add client to target seat: Device or resource busy