[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.12-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240202) #1 PREEMPT Thu Jan 18 21:01:37 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241280K/262144K available (10633K kernel code, 1424K rwdata, 2832K rodata, 464K init, 340K bss, 20864K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42188 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000213] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000795] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.006475] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.015231] Console: colour dummy device 80x30 [ 0.017212] Calibrating delay loop... 634.88 BogoMIPS (lpj=3174400) [ 0.199368] CPU: Testing write buffer coherency: ok [ 0.201212] pid_max: default: 32768 minimum: 301 [ 0.203340] LSM: initializing lsm=capability,landlock,integrity [ 0.204062] landlock: Up and running. [ 0.208392] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.208506] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.270255] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.271919] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.273787] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.275467] Setting up static identity map for 0x8400 - 0x8458 [ 0.277553] rcu: Hierarchical SRCU implementation. [ 0.277648] rcu: Max phase no-delay instances is 1000. [ 0.305254] devtmpfs: initialized [ 0.339776] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.343236] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.343555] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.367920] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.380803] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.424434] platform vga: Fixed dependency cycle(s) with /bridge/ports/port@1/endpoint [ 0.463599] amba 10120000.display: Fixed dependency cycle(s) with /bridge/ports/port@0/endpoint [ 0.476752] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000/port@0/endpoint@0 [ 0.486826] Serial: AMBA PL011 UART driver [ 0.504897] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.507674] printk: console [ttyAMA0] enabled [ 0.565913] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.573663] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.579934] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.584169] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.598095] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.989105] raid6: int32x8 gen() 36 MB/s [ 1.329023] raid6: int32x4 gen() 88 MB/s [ 1.669152] raid6: int32x2 gen() 340 MB/s [ 2.009003] raid6: int32x1 gen() 302 MB/s [ 2.009574] raid6: using algorithm int32x2 gen() 340 MB/s [ 2.349360] raid6: .... xor() 108 MB/s, rmw enabled [ 2.350449] raid6: using intx1 recovery algorithm [ 2.382047] SCSI subsystem initialized [ 2.386160] usbcore: registered new interface driver usbfs [ 2.387876] usbcore: registered new interface driver hub [ 2.389937] usbcore: registered new device driver usb [ 2.411221] pps_core: LinuxPPS API ver. 1 registered [ 2.412098] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.414439] PTP clock support registered [ 2.435458] Advanced Linux Sound Architecture Driver Initialized. [ 2.503842] vgaarb: loaded [ 2.512720] clocksource: Switched to clocksource arm,sp804 [ 3.225972] NET: Registered PF_INET protocol family [ 3.230372] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.253506] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.254962] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.256298] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.257367] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.258617] TCP: Hash tables configured (established 2048 bind 2048) [ 3.262227] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.264180] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.269500] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.280766] RPC: Registered named UNIX socket transport module. [ 3.281908] RPC: Registered udp transport module. [ 3.282995] RPC: Registered tcp transport module. [ 3.283615] RPC: Registered tcp-with-tls transport module. [ 3.284238] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.284975] PCI: CLS 0 bytes, default 32 [ 3.286931] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.315479] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.329324] NFS: Registering the id_resolver key type [ 3.334169] Key type id_resolver registered [ 3.335051] Key type id_legacy registered [ 3.346773] Key type cifs.idmap registered [ 3.836074] xor: measuring software checksum speed [ 3.856659] arm4regs : 545 MB/sec [ 3.874767] 8regs : 629 MB/sec [ 3.892454] 32regs : 611 MB/sec [ 3.893931] xor: using function: 8regs (629 MB/sec) [ 3.896252] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.897489] io scheduler mq-deadline registered [ 3.898273] io scheduler kyber registered [ 3.900332] io scheduler bfq registered [ 3.914978] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 3.920331] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 3.926925] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 3.931444] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 3.935978] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 3.938500] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 3.940782] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 3.941894] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 3.946278] versatile-pci 10001000.pci: PCI core found (slot 11) [ 3.951507] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 3.953478] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.954923] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.955718] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 3.956554] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 3.961995] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 3.965477] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 3.966649] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 3.967450] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 3.980156] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 3.981285] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 3.982263] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.984399] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 3.988017] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 3.989024] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 3.989835] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.992443] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 3.994091] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.997240] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 3.998347] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.001144] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 4.002092] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 4.003689] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.008557] PCI: bus0: Fast back to back transfers disabled [ 4.012340] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 4.014530] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 4.015943] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 4.017048] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 4.018007] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 4.018918] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 4.019789] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 4.020600] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 4.021440] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.022200] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 4.023607] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 4.024403] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 4.028104] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 4.035226] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.038320] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.046216] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 4.054215] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 4.058135] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 4.063643] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 4.071202] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.117415] random: crng init done [ 4.125663] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 4.127855] [drm] features: -virgl +edid -resource_blob -host_visible [ 4.128006] [drm] features: -context_init [ 4.130357] [drm] number of scanouts: 1 [ 4.130901] [drm] number of cap sets: 0 [ 4.166360] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 4.410127] Console: switching to colour frame buffer device 160x50 [ 4.470809] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.490963] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 4.496808] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.654350] brd: module loaded [ 4.656585] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 4.668688] virtio_blk virtio3: [vda] 949004 512-byte logical blocks (486 MB/463 MiB) [ 4.710700] physmap-flash 34000000.flash: versatile/realview flash protection [ 4.745232] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 4.751081] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 4.755538] Intel/Sharp Extended Query Table at 0x0031 [ 4.757613] Using buffer write method [ 4.848614] smc91x: not found (-19). [ 4.851110] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 4.853793] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 4.919981] rtc-ds1307 0-0068: registered as rtc0 [ 4.946443] rtc-ds1307 0-0068: setting system clock to 2024-02-07T05:23:53 UTC (1707283433) [ 4.976640] rtc-pl031 101e8000.rtc: registered as rtc1 [ 4.979631] i2c_dev: i2c /dev entries driver [ 5.001359] versatile reboot driver registered [ 5.009759] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.014196] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 5.048126] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 5.057901] leds-syscon 10000008.0.led: registered LED (null) [ 5.060496] leds-syscon 10000008.1.led: registered LED (null) [ 5.062514] leds-syscon 10000008.2.led: registered LED (null) [ 5.065018] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 5.085809] leds-syscon 10000008.3.led: registered LED (null) [ 5.087936] leds-syscon 10000008.4.led: registered LED (null) [ 5.089723] leds-syscon 10000008.5.led: registered LED (null) [ 5.091623] leds-syscon 10000008.6.led: registered LED (null) [ 5.102129] leds-syscon 10000008.7.led: registered LED (null) [ 5.115796] ledtrig-cpu: registered to indicate activity on CPUs [ 5.134268] usbcore: registered new interface driver usbhid [ 5.134910] usbhid: USB HID core driver [ 5.195444] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 5.196779] aaci-pl041 10004000.aaci: FIFO 512 entries [ 5.200687] u32 classifier [ 5.201219] input device check on [ 5.201764] Actions configured [ 5.207119] NET: Registered PF_INET6 protocol family [ 5.229100] Segment Routing with IPv6 [ 5.229881] In-situ OAM (IOAM) with IPv6 [ 5.231177] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.239110] NET: Registered PF_PACKET protocol family [ 5.240475] Bridge firewalling registered [ 5.243280] Key type dns_resolver registered [ 5.246698] NET: Registered PF_VSOCK protocol family [ 5.374121] registered taskstats version 1 [ 5.466216] Key type .fscrypt registered [ 5.466906] Key type fscrypt-provisioning registered [ 5.480560] Btrfs loaded, zoned=no, fsverity=no [ 5.500950] Key type encrypted registered [ 5.509994] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.510912] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.517360] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.521517] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.522360] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.525804] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.529062] printk: console [netcon0] enabled [ 5.529789] netconsole: network logging started [ 5.728624] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 5.734165] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.734933] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.736536] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.824333] IP-Config: Complete: [ 5.825155] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 5.826542] host=192.168.7.4, domain=, nis-domain=(none) [ 5.827256] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.827393] nameserver0=8.8.8.8 [ 5.854995] clk: Disabling unused clocks [ 5.856700] ALSA device list: [ 5.857393] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 5.876954] md: Waiting for all devices to be available before autodetect [ 5.878070] md: If you don't use raid, use raid=noautodetect [ 5.878724] md: Autodetecting RAID arrays. [ 5.879065] md: autorun ... [ 5.879344] md: ... autorun DONE. [ 6.147529] EXT4-fs (vda): mounted filesystem 9a5754f4-aea2-4ccf-96e2-84ec60ce8588 r/w with ordered data mode. Quota mode: disabled. [ 6.150246] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.158057] devtmpfs: mounted [ 6.257126] Freeing unused kernel image (initmem) memory: 464K [ 6.258199] Kernel memory protection not selected by kernel config. [ 6.259556] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 12.926055] udevd[98]: starting version 3.2.14 [ 13.155426] udevd[99]: starting eudev-3.2.14 [ 16.504758] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 16.505421] clcd-pl11x: probe of 10120000.display failed with error -2 [ 16.506748] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 16.511685] amba 10100000.smc: deferred probe pending [ 16.512170] amba 10110000.mpmc: deferred probe pending [ 16.526409] amba 101e0000.sctl: deferred probe pending [ 16.526925] amba 101e1000.watchdog: deferred probe pending [ 16.527283] amba 101f0000.sci: deferred probe pending [ 16.527617] amba 101f4000.spi: deferred probe pending [ 16.527941] amba 1000a000.sci: deferred probe pending [ 16.528265] amba 10120000.display: deferred probe pending [ 37.994632] EXT4-fs (vda): re-mounted 9a5754f4-aea2-4ccf-96e2-84ec60ce8588 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.10/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.10/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.12-yocto-standard #1 PREEMPT Thu Jan 18 21:01:37 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 dropbear. Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 7 05:24:45 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-19a6f31b6a0ce8836606c9740b3706cf11a9a698 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-UTbFLPo4GL,guid=625852eac764789749922c6265c31434 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused Matchbox: error parsing /usr/share/themes/Sato/matchbox/theme.xml Error loading resource from dbus-daemon[531]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=513 comm="connman-applet") dbus-daemon[531]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry