[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.15-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240202) #1 PREEMPT Sun Feb 4 12:10:03 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10641K kernel code, 1424K rwdata, 2836K rodata, 468K init, 340K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42211 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000301] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000986] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.007411] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.018049] Console: colour dummy device 80x30 [ 0.020586] Calibrating delay loop... 540.26 BogoMIPS (lpj=2701312) [ 0.078772] CPU: Testing write buffer coherency: ok [ 0.080778] pid_max: default: 32768 minimum: 301 [ 0.082791] LSM: initializing lsm=capability,landlock,integrity [ 0.083639] landlock: Up and running. [ 0.091294] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.091556] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.151592] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.153671] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.155621] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.162129] Setting up static identity map for 0x8400 - 0x8458 [ 0.163928] rcu: Hierarchical SRCU implementation. [ 0.164010] rcu: Max phase no-delay instances is 1000. [ 0.190627] devtmpfs: initialized [ 0.220907] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.222946] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.223140] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.240276] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.246095] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.276473] platform vga: Fixed dependency cycle(s) with /bridge/ports/port@1/endpoint [ 0.313330] amba 10120000.display: Fixed dependency cycle(s) with /bridge/ports/port@0/endpoint [ 0.328969] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000/port@0/endpoint@0 [ 0.345779] Serial: AMBA PL011 UART driver [ 0.369973] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.373427] printk: console [ttyAMA0] enabled [ 0.456862] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.465813] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.472989] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.696222] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.717186] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.129072] raid6: int32x8 gen() 35 MB/s [ 1.468985] raid6: int32x4 gen() 52 MB/s [ 1.809002] raid6: int32x2 gen() 218 MB/s [ 2.149001] raid6: int32x1 gen() 239 MB/s [ 2.150207] raid6: using algorithm int32x1 gen() 239 MB/s [ 2.489047] raid6: .... xor() 110 MB/s, rmw enabled [ 2.490399] raid6: using intx1 recovery algorithm [ 2.514933] SCSI subsystem initialized [ 2.530450] usbcore: registered new interface driver usbfs [ 2.532402] usbcore: registered new interface driver hub [ 2.533905] usbcore: registered new device driver usb [ 2.557259] pps_core: LinuxPPS API ver. 1 registered [ 2.558304] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.570336] PTP clock support registered [ 2.589767] Advanced Linux Sound Architecture Driver Initialized. [ 2.669886] vgaarb: loaded [ 2.685637] clocksource: Switched to clocksource arm,sp804 [ 3.552457] NET: Registered PF_INET protocol family [ 3.557591] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.582533] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.584341] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.586283] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.587782] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.589317] TCP: Hash tables configured (established 2048 bind 2048) [ 3.593705] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.595926] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.602490] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.615553] RPC: Registered named UNIX socket transport module. [ 3.616767] RPC: Registered udp transport module. [ 3.617520] RPC: Registered tcp transport module. [ 3.618226] RPC: Registered tcp-with-tls transport module. [ 3.618993] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.620274] PCI: CLS 0 bytes, default 32 [ 3.622806] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.654317] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.672128] NFS: Registering the id_resolver key type [ 3.677570] Key type id_resolver registered [ 3.678484] Key type id_legacy registered [ 3.688670] Key type cifs.idmap registered [ 4.088525] xor: measuring software checksum speed [ 4.111252] arm4regs : 483 MB/sec [ 4.130522] 8regs : 593 MB/sec [ 4.149817] 32regs : 559 MB/sec [ 4.150913] xor: using function: 8regs (593 MB/sec) [ 4.153489] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 4.154802] io scheduler mq-deadline registered [ 4.156395] io scheduler kyber registered [ 4.158319] io scheduler bfq registered [ 4.173493] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 4.179546] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 4.184284] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 4.189761] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 4.193741] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 4.197118] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 4.199901] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 4.201367] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 4.206176] versatile-pci 10001000.pci: PCI core found (slot 11) [ 4.211887] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 4.213462] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.215566] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.216676] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 4.217572] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 4.223462] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 4.226817] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 4.228187] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 4.229184] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 4.245498] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 4.246766] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 4.247930] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.249220] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 4.252615] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 4.253655] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 4.254605] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.258540] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 4.259461] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.262259] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 4.263407] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.267238] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 4.268439] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 4.269411] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.274668] PCI: bus0: Fast back to back transfers disabled [ 4.279289] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 4.280992] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 4.282526] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 4.283694] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 4.284733] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 4.286412] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 4.287557] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 4.288665] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 4.289755] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.290748] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 4.291647] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 4.292639] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 4.297648] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 4.304622] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.308447] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.316408] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 4.323517] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 4.327621] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 4.331659] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 4.337274] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.378679] random: crng init done [ 4.387142] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 4.389236] [drm] features: -virgl +edid -resource_blob -host_visible [ 4.389341] [drm] features: -context_init [ 4.391683] [drm] number of scanouts: 1 [ 4.392311] [drm] number of cap sets: 0 [ 4.429319] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 4.843910] Console: switching to colour frame buffer device 160x50 [ 4.908581] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.947095] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 4.952327] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.122576] brd: module loaded [ 5.125581] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 5.139017] virtio_blk virtio3: [vda] 950138 512-byte logical blocks (486 MB/464 MiB) [ 5.195962] physmap-flash 34000000.flash: versatile/realview flash protection [ 5.227201] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 5.232762] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 5.235657] Intel/Sharp Extended Query Table at 0x0031 [ 5.238107] Using buffer write method [ 5.349463] smc91x: not found (-19). [ 5.352619] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 5.354352] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 5.459914] rtc-ds1307 0-0068: registered as rtc0 [ 5.483549] rtc-ds1307 0-0068: setting system clock to 2024-02-10T16:10:47 UTC (1707581447) [ 5.508157] rtc-pl031 101e8000.rtc: registered as rtc1 [ 5.511501] i2c_dev: i2c /dev entries driver [ 5.518050] versatile reboot driver registered [ 5.526757] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.558717] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 5.567485] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 5.573957] leds-syscon 10000008.0.led: registered LED (null) [ 5.578947] leds-syscon 10000008.1.led: registered LED (null) [ 5.581344] leds-syscon 10000008.2.led: registered LED (null) [ 5.596082] leds-syscon 10000008.3.led: registered LED (null) [ 5.599039] leds-syscon 10000008.4.led: registered LED (null) [ 5.601361] leds-syscon 10000008.5.led: registered LED (null) [ 5.603780] leds-syscon 10000008.6.led: registered LED (null) [ 5.606922] leds-syscon 10000008.7.led: registered LED (null) [ 5.624912] ledtrig-cpu: registered to indicate activity on CPUs [ 5.633770] usbcore: registered new interface driver usbhid [ 5.634835] usbhid: USB HID core driver [ 5.701780] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 5.703429] aaci-pl041 10004000.aaci: FIFO 512 entries [ 5.710509] u32 classifier [ 5.711250] input device check on [ 5.711934] Actions configured [ 5.717103] NET: Registered PF_INET6 protocol family [ 5.746483] Segment Routing with IPv6 [ 5.747959] In-situ OAM (IOAM) with IPv6 [ 5.751177] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.763740] NET: Registered PF_PACKET protocol family [ 5.769461] Bridge firewalling registered [ 5.773366] Key type dns_resolver registered [ 5.777743] NET: Registered PF_VSOCK protocol family [ 5.938702] registered taskstats version 1 [ 6.082218] Key type .fscrypt registered [ 6.083127] Key type fscrypt-provisioning registered [ 6.118597] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input1 [ 6.132194] Btrfs loaded, zoned=no, fsverity=no [ 6.162852] Key type encrypted registered [ 6.177426] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.178973] clcd-pl11x: probe of 10120000.display failed with error -2 [ 6.182064] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.190919] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.192500] clcd-pl11x: probe of 10120000.display failed with error -2 [ 6.197430] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.202699] printk: console [netcon0] enabled [ 6.203942] netconsole: network logging started [ 6.264357] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input2 [ 6.271578] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.272400] clcd-pl11x: probe of 10120000.display failed with error -2 [ 6.276585] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.337156] IP-Config: Complete: [ 6.338064] device=eth0, hwaddr=52:54:00:12:34:0a, ipaddr=192.168.7.10, mask=255.255.255.0, gw=192.168.7.9 [ 6.340065] host=192.168.7.10, domain=, nis-domain=(none) [ 6.341053] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 6.341236] nameserver0=8.8.8.8 [ 6.378097] clk: Disabling unused clocks [ 6.379966] ALSA device list: [ 6.380733] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 6.401716] md: Waiting for all devices to be available before autodetect [ 6.403136] md: If you don't use raid, use raid=noautodetect [ 6.404198] md: Autodetecting RAID arrays. [ 6.405000] md: autorun ... [ 6.407020] md: ... autorun DONE. [ 6.700165] EXT4-fs (vda): mounted filesystem ed5e76d7-847c-4083-b780-92f3ad8d8a08 r/w with ordered data mode. Quota mode: disabled. [ 6.703871] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.714564] devtmpfs: mounted [ 6.812044] Freeing unused kernel image (initmem) memory: 468K [ 6.813303] Kernel memory protection not selected by kernel config. [ 6.814918] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 15.142855] udevd[97]: starting version 3.2.14 [ 15.900697] udevd[98]: starting eudev-3.2.14 [ 16.693421] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 16.717669] clcd-pl11x: probe of 10120000.display failed with error -2 [ 16.739731] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 16.744659] amba 10100000.smc: deferred probe pending [ 16.747615] amba 10110000.mpmc: deferred probe pending [ 16.750040] amba 101e0000.sctl: deferred probe pending [ 16.750431] amba 101e1000.watchdog: deferred probe pending [ 16.750805] amba 101f0000.sci: deferred probe pending [ 16.751179] amba 101f4000.spi: deferred probe pending [ 16.751538] amba 1000a000.sci: deferred probe pending [ 16.751887] amba 10120000.display: deferred probe pending [ 58.289424] EXT4-fs (vda): re-mounted ed5e76d7-847c-4083-b780-92f3ad8d8a08 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.15-yocto-standard #1 PREEMPT Sun Feb 4 12:10:03 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 10 16:12:12 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-6e5f6e165ac4bc7c4df7a8de2f22120563ad3579 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-D6zLhkSzPT,guid=fe02c7eb951fafedf6d8478865c7a0a3 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused [settings daemon] Forking. run with -n to prevent fork Matchbox: error parsing /usr/share/themes/Sato/matchbox/theme.xml Error loading resource from dbus-daemon[546]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=526 comm="connman-applet") dbus-daemon[546]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry