[ 0.000000] Linux version 6.6.15-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240202) #1 SMP PREEMPT_DYNAMIC Sun Feb 4 12:10:03 UTC 2024 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 359765367 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000005] tsc: Detected 2599.996 MHz processor [ 0.001025] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001046] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001049] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.009055] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.009150] ACPI: Early table checksum verification disabled [ 0.009154] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS ) [ 0.009165] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009171] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009178] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009182] ACPI: FACS 0x000000001FFE0000 000040 [ 0.009185] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009189] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009192] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009196] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.009199] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a] [ 0.009200] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216] [ 0.009202] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.009202] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a] [ 0.009203] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2] [ 0.009204] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e] [ 0.009205] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436] [ 0.009256] Zone ranges: [ 0.009257] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009259] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.009261] Normal empty [ 0.009262] Movable zone start for each node [ 0.009262] Early memory node ranges [ 0.009263] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.009264] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.009266] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.009654] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.009670] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.011271] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.011730] ACPI: PM-Timer IO Port: 0x608 [ 0.011741] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.011782] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.011786] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.011788] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.011789] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.011790] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.011791] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.011796] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.011797] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.011801] TSC deadline timer available [ 0.011801] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.011816] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.011831] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.011832] Booting paravirtualized kernel on KVM [ 0.011834] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.011839] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.012403] percpu: Embedded 56 pages/cpu s190568 r8192 d30616 u524288 [ 0.012429] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.012512] random: crng init done [ 0.012572] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.012605] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.012694] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.013223] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.014609] Memory: 477740K/523736K available (18432K kernel code, 2315K rwdata, 5236K rodata, 3380K init, 2320K bss, 45736K reserved, 0K cma-reserved) [ 0.014648] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.014655] Kernel/User page tables isolation: enabled [ 0.014676] ftrace: allocating 50989 entries in 200 pages [ 0.023696] ftrace: allocated 200 pages with 3 groups [ 0.023751] Dynamic Preempt: full [ 0.024170] rcu: Preemptible hierarchical RCU implementation. [ 0.024171] rcu: RCU event tracing is enabled. [ 0.024172] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.024173] All grace periods are expedited (rcu_expedited). [ 0.024174] Trampoline variant of Tasks RCU enabled. [ 0.024174] Rude variant of Tasks RCU enabled. [ 0.024175] Tracing variant of Tasks RCU enabled. [ 0.024175] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.024176] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.027622] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.027815] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.027934] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.033397] Console: colour VGA+ 80x25 [ 0.033442] printk: console [ttyS0] enabled [ 0.157802] ACPI: Core revision 20230628 [ 0.158693] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.160440] APIC: Switch to symmetric I/O mode setup [ 0.161633] x2apic enabled [ 0.162441] APIC: Switched APIC routing to: physical x2apic [ 0.164531] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.165720] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.167648] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.168755] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.169650] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.170650] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.171651] Spectre V2 : Mitigation: Retpolines [ 0.172649] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.173650] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.174650] Speculative Store Bypass: Vulnerable [ 0.175650] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.176649] MMIO Stale Data: Unknown: No mitigations [ 0.177649] SRBDS: Unknown: Dependent on hypervisor status [ 0.178661] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.179650] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.180649] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.181650] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.182650] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.203856] Freeing SMP alternatives memory: 52K [ 0.204651] pid_max: default: 32768 minimum: 301 [ 0.205684] LSM: initializing lsm=capability,landlock,integrity [ 0.206656] landlock: Up and running. [ 0.207367] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.207651] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.208934] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.209812] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.210670] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.211671] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.212673] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.213680] signal: max sigframe size: 1776 [ 0.214521] rcu: Hierarchical SRCU implementation. [ 0.214651] rcu: Max phase no-delay instances is 400. [ 0.215812] smp: Bringing up secondary CPUs ... [ 0.216745] smpboot: x86: Booting SMP configuration: [ 0.217656] .... node #0, CPUs: #1 #2 #3 [ 0.217988] smp: Brought up 1 node, 4 CPUs [ 0.219433] smpboot: Max logical packages: 1 [ 0.219651] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.220875] devtmpfs: initialized [ 0.221746] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.222654] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.224070] pinctrl core: initialized pinctrl subsystem [ 0.225435] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.225800] thermal_sys: Registered thermal governor 'step_wise' [ 0.225801] thermal_sys: Registered thermal governor 'user_space' [ 0.226666] cpuidle: using governor menu [ 0.228536] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.228653] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.229660] PCI: Using configuration type 1 for base access [ 0.230821] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.248651] raid6: sse2x4 gen() 16041 MB/s [ 0.265651] raid6: sse2x2 gen() 15377 MB/s [ 0.282651] raid6: sse2x1 gen() 11920 MB/s [ 0.283502] raid6: using algorithm sse2x4 gen() 16041 MB/s [ 0.300650] raid6: .... xor() 9007 MB/s, rmw enabled [ 0.301645] raid6: using ssse3x2 recovery algorithm [ 0.302603] ACPI: Added _OSI(Module Device) [ 0.302652] ACPI: Added _OSI(Processor Device) [ 0.303485] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.303652] ACPI: Added _OSI(Processor Aggregator Device) [ 0.305405] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.306684] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.307748] ACPI: Interpreter enabled [ 0.308425] ACPI: PM: (supports S0 S3 S5) [ 0.308652] ACPI: Using IOAPIC for interrupt routing [ 0.309614] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.309651] PCI: Using E820 reservations for host bridge windows [ 0.310732] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.313277] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.313656] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.314708] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.315700] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.316721] PCI host bridge to bus 0000:00 [ 0.317465] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.317652] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.318651] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.319651] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.320651] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.321651] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.322652] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.323728] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.325211] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.326652] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.328652] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.332653] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.335645] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.337324] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.338652] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.340652] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.344652] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.347301] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.349275] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.352431] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.353671] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.356672] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.357749] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.359807] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.361652] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.363652] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.367653] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.370407] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.372371] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.373561] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.375347] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.376470] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.378334] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.379542] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.380819] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.383692] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.385077] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.385888] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.390977] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.392276] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.393639] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.395508] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.397513] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.397727] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.398719] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.399718] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.400717] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.401717] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.402719] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.403722] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.404683] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.405660] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.406661] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.407660] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.408659] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.409659] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.410661] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.411660] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.413075] iommu: Default domain type: Translated [ 0.413651] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.414755] SCSI subsystem initialized [ 0.415659] ACPI: bus type USB registered [ 0.416419] usbcore: registered new interface driver usbfs [ 0.416661] usbcore: registered new interface driver hub [ 0.417624] usbcore: registered new device driver usb [ 0.417666] pps_core: LinuxPPS API ver. 1 registered [ 0.418554] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.418655] PTP clock support registered [ 0.419836] Bluetooth: Core ver 2.22 [ 0.420535] NET: Registered PF_BLUETOOTH protocol family [ 0.420651] Bluetooth: HCI device and connection manager initialized [ 0.421654] Bluetooth: HCI socket layer initialized [ 0.422533] Bluetooth: L2CAP socket layer initialized [ 0.422656] Bluetooth: SCO socket layer initialized [ 0.423664] PCI: Using ACPI for IRQ routing [ 0.479675] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.480648] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.480648] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.480654] vgaarb: loaded [ 0.481208] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.481650] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.486728] clocksource: Switched to clocksource kvm-clock [ 0.487832] pnp: PnP ACPI init [ 0.489922] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.491451] pnp: PnP ACPI: found 5 devices [ 0.498758] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.500559] NET: Registered PF_INET protocol family [ 0.501509] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.503050] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.504579] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.505984] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.507375] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.508720] TCP: Hash tables configured (established 4096 bind 4096) [ 0.509909] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.511094] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.512399] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.513689] RPC: Registered named UNIX socket transport module. [ 0.514775] RPC: Registered udp transport module. [ 0.515628] RPC: Registered tcp transport module. [ 0.516476] RPC: Registered tcp-with-tls transport module. [ 0.517555] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.519694] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.520817] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.521929] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.523165] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.524395] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.525631] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.527189] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.528801] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.530327] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.531821] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.533364] PCI: CLS 0 bytes, default 64 [ 0.702563] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.704201] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.706740] Initialise system trusted keyrings [ 0.707689] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.709065] NFS: Registering the id_resolver key type [ 0.710036] Key type id_resolver registered [ 0.710795] Key type id_legacy registered [ 0.713156] Key type cifs.idmap registered [ 0.726551] xor: automatically using best checksumming function avx [ 0.727915] Key type asymmetric registered [ 0.728679] Asymmetric key parser 'x509' registered [ 0.730924] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.732312] io scheduler mq-deadline registered [ 0.733158] io scheduler kyber registered [ 0.733925] io scheduler bfq registered [ 0.734997] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.739898] ACPI: button: Power Button [PWRF] [ 0.741294] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.743436] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.745412] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.749587] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.751545] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.752904] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.754523] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.757068] Linux agpgart interface v0.103 [ 0.757935] ACPI: bus type drm_connector registered [ 0.758973] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.759999] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.764210] Console: switching to colour dummy device 80x25 [ 0.765432] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.765434] [drm] features: -context_init [ 0.767971] [drm] number of scanouts: 1 [ 0.768697] [drm] number of cap sets: 0 [ 0.769914] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 0.774144] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.789476] Console: switching to colour frame buffer device 160x50 [ 0.809469] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.813118] brd: module loaded [ 0.814737] loop: module loaded [ 0.815535] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.817931] virtio_blk virtio3: [vda] 1391400 512-byte logical blocks (712 MB/679 MiB) [ 0.821455] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.823010] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.824987] scsi host0: ahci [ 0.825770] scsi host1: ahci [ 0.826572] scsi host2: ahci [ 0.827361] scsi host3: ahci [ 0.828146] scsi host4: ahci [ 0.828908] scsi host5: ahci [ 0.829522] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.830881] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.832223] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.833561] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.834899] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.836238] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.838997] e100: Intel(R) PRO/100 Network Driver [ 0.839927] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.840926] e1000: Intel(R) PRO/1000 Network Driver [ 0.841801] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.842837] e1000e: Intel(R) PRO/1000 Network Driver [ 0.843730] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.844799] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.845773] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.847658] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.848973] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.850425] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.851694] hub 1-0:1.0: USB hub found [ 0.852400] hub 1-0:1.0: 2 ports detected [ 0.853468] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.854921] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.856476] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.863901] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.865193] hub 2-0:1.0: USB hub found [ 0.865934] hub 2-0:1.0: 6 ports detected [ 0.888961] hub 1-0:1.0: USB hub found [ 0.889745] hub 1-0:1.0: 2 ports detected [ 0.890647] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.891700] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.893261] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.894587] hub 3-0:1.0: USB hub found [ 0.895338] hub 3-0:1.0: 2 ports detected [ 0.896868] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.897892] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.899617] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.900922] hub 4-0:1.0: USB hub found [ 0.901663] hub 4-0:1.0: 2 ports detected [ 0.902594] usbcore: registered new interface driver usb-storage [ 0.903805] usbcore: registered new interface driver usbserial_generic [ 0.905159] usbserial: USB Serial support registered for generic [ 0.906326] usbcore: registered new interface driver ftdi_sio [ 0.907420] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.908833] usbcore: registered new interface driver pl2303 [ 0.909896] usbserial: USB Serial support registered for pl2303 [ 0.911042] i8042: PNP: No PS/2 controller found. [ 0.912092] mousedev: PS/2 mouse device common for all mice [ 0.913335] rtc_cmos 00:03: RTC can wake from S4 [ 0.914751] rtc_cmos 00:03: registered as rtc0 [ 0.915657] rtc_cmos 00:03: setting system clock to 2024-02-10T05:24:17 UTC (1707542657) [ 0.917260] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.918994] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.919118] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.920718] intel_pstate: CPU model not supported [ 0.923668] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.924496] sdhci: Secure Digital Host Controller Interface driver [ 0.925552] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.926720] sdhci: Copyright(c) Pierre Ossman [ 0.928957] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.930132] usbcore: registered new interface driver usbhid [ 0.931196] usbhid: USB HID core driver [ 0.931936] u32 classifier [ 0.932462] input device check on [ 0.933143] Actions configured [ 0.933883] NET: Registered PF_INET6 protocol family [ 0.935300] Segment Routing with IPv6 [ 0.936030] In-situ OAM (IOAM) with IPv6 [ 0.936812] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.938117] NET: Registered PF_PACKET protocol family [ 0.939893] Bridge firewalling registered [ 0.940982] Key type dns_resolver registered [ 0.941937] NET: Registered PF_VSOCK protocol family [ 0.943289] IPI shorthand broadcast: enabled [ 0.945519] sched_clock: Marking stable (810002535, 134825049)->(1023804747, -78977163) [ 0.947184] registered taskstats version 1 [ 0.948036] Loading compiled-in X.509 certificates [ 0.950306] Key type .fscrypt registered [ 0.951088] Key type fscrypt-provisioning registered [ 0.952399] Btrfs loaded, zoned=no, fsverity=no [ 0.953781] Key type encrypted registered [ 0.954651] printk: console [netcon0] enabled [ 0.955506] netconsole: network logging started [ 1.107881] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.144290] ata2: SATA link down (SStatus 0 SControl 300) [ 1.145630] ata6: SATA link down (SStatus 0 SControl 300) [ 1.146840] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.148166] ata1: SATA link down (SStatus 0 SControl 300) [ 1.149308] ata5: SATA link down (SStatus 0 SControl 300) [ 1.150510] ata4: SATA link down (SStatus 0 SControl 300) [ 1.152406] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.153529] ata3.00: applying bridge limits [ 1.154429] ata3.00: configured for UDMA/100 [ 1.155595] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.169120] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.170427] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.189856] IP-Config: Complete: [ 1.191216] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.193057] host=192.168.7.2, domain=, nis-domain=(none) [ 1.194110] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.194112] nameserver0=8.8.8.8 [ 1.196211] clk: Disabling unused clocks [ 1.197281] md: Waiting for all devices to be available before autodetect [ 1.198290] md: If you don't use raid, use raid=noautodetect [ 1.199125] md: Autodetecting RAID arrays. [ 1.199727] md: autorun ... [ 1.200143] md: ... autorun DONE. [ 1.204748] EXT4-fs (vda): mounted filesystem 1ab8e431-d8f0-440d-8bd9-0bded5489397 r/w with ordered data mode. Quota mode: disabled. [ 1.206489] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.207464] devtmpfs: mounted [ 1.209087] Freeing unused kernel image (initmem) memory: 3380K [ 1.218875] Write protecting the kernel read-only data: 24576k [ 1.220141] Freeing unused kernel image (rodata/data gap) memory: 908K [ 1.221174] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled [ 1.256672] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.258444] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 1.301951] udevd[137]: starting version 3.2.14 [ 1.316461] udevd[138]: starting eudev-3.2.14 [ 1.375638] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.515924] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.569143] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.634437] EXT4-fs (vda): re-mounted 1ab8e431-d8f0-440d-8bd9-0bded5489397 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemux86-64 6.6.15-yocto-standard #1 SMP PREEMPT_DYNAMIC Sun Feb 4 12:10:03 UTC 2024 x86_64 Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 10 05:24:18 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-R5fX9ukN2R,guid=72121ab499d6e2a19206efc565c70882 Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Matchbox: error parsing /usr/share/themes/Sato/matchbox/theme.xml Error loading resource from dbus-daemon[583]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=560 comm="connman-applet") matchbox-wm: X error warning (0xc00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[583]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQC/+9yNOnfybVHgXheLczIwbo7NlAyOqTs+eAknMEXg2x8iVfpuKUsHRHP3o+R6VYPDojoMRW1+E9XafbrMu+TyKYGx/WtD0YEzBTdgY1ORZqAHXRwHQgELPOAKkMFlNheXEWDQ6mWQfgFR6MH1z67Y+X0HJjN4jsQoS2h1y+dNwcVbFLHzSKVubxzDMD3sdq/3N/4PdWNoSy++29lLQmVCDuQywQfFFkh+HuUaPCL//vn/ec5u+K941Pkqr/mWPpjNw4rSFYSUzWUKVO9WGr6d7Wj/1HdyAsCPYO62+O8g1lIKa3IQCo/tIZoOGnsAgdpNthveu7sBwU8F4cV5VoJ1 root@qemux86-64 Fingerprint: SHA256:rKYUoPqabD9GvEr9LPfu89miBWBECBWRufaIjM+noo4 dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done [ 2.501354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.502209] Bluetooth: BNEP filters: protocol multicast [ 2.502214] Bluetooth: BNEP socket layer initialized * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-19687ca10ccacb3603d6ac703f3ace20e16403c8 qemux86-64 /dev/ttyS0 qemux86-64 login: