[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.15-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240202) #1 PREEMPT Sun Feb 4 12:10:03 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10641K kernel code, 1424K rwdata, 2836K rodata, 468K init, 340K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42211 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000421] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001533] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.015550] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.031704] Console: colour dummy device 80x30 [ 0.034904] Calibrating delay loop... 545.99 BogoMIPS (lpj=2729984) [ 0.138490] CPU: Testing write buffer coherency: ok [ 0.140344] pid_max: default: 32768 minimum: 301 [ 0.142297] LSM: initializing lsm=capability,landlock,integrity [ 0.143127] landlock: Up and running. [ 0.147330] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.147461] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.229765] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.231488] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.233429] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.235650] Setting up static identity map for 0x8400 - 0x8458 [ 0.239702] rcu: Hierarchical SRCU implementation. [ 0.239867] rcu: Max phase no-delay instances is 1000. [ 0.269879] devtmpfs: initialized [ 0.305906] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.309694] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.310030] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.330689] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.338483] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.367094] platform vga: Fixed dependency cycle(s) with /bridge/ports/port@1/endpoint [ 0.393680] amba 10120000.display: Fixed dependency cycle(s) with /bridge/ports/port@0/endpoint [ 0.403301] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000/port@0/endpoint@0 [ 0.413088] Serial: AMBA PL011 UART driver [ 0.430771] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.433767] printk: console [ttyAMA0] enabled [ 0.481330] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.487208] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.493614] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.496808] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.506765] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.908176] raid6: int32x8 gen() 35 MB/s [ 1.248053] raid6: int32x4 gen() 51 MB/s [ 1.588053] raid6: int32x2 gen() 212 MB/s [ 1.928071] raid6: int32x1 gen() 229 MB/s [ 1.928955] raid6: using algorithm int32x1 gen() 229 MB/s [ 2.268125] raid6: .... xor() 115 MB/s, rmw enabled [ 2.269097] raid6: using intx1 recovery algorithm [ 2.293160] SCSI subsystem initialized [ 2.296849] usbcore: registered new interface driver usbfs [ 2.309100] usbcore: registered new interface driver hub [ 2.310494] usbcore: registered new device driver usb [ 2.330958] pps_core: LinuxPPS API ver. 1 registered [ 2.331781] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.333002] PTP clock support registered [ 2.340973] Advanced Linux Sound Architecture Driver Initialized. [ 2.400625] vgaarb: loaded [ 2.406811] clocksource: Switched to clocksource arm,sp804 [ 3.073772] NET: Registered PF_INET protocol family [ 3.078259] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.099027] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.100318] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.101364] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.102411] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.103641] TCP: Hash tables configured (established 2048 bind 2048) [ 3.107408] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.108853] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.114142] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.125129] RPC: Registered named UNIX socket transport module. [ 3.126191] RPC: Registered udp transport module. [ 3.127435] RPC: Registered tcp transport module. [ 3.128056] RPC: Registered tcp-with-tls transport module. [ 3.128640] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.129673] PCI: CLS 0 bytes, default 32 [ 3.131911] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.160450] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.174668] NFS: Registering the id_resolver key type [ 3.179502] Key type id_resolver registered [ 3.180335] Key type id_legacy registered [ 3.192157] Key type cifs.idmap registered [ 3.587731] xor: measuring software checksum speed [ 3.602044] arm4regs : 739 MB/sec [ 3.612653] 8regs : 1044 MB/sec [ 3.626474] 32regs : 899 MB/sec [ 3.627279] xor: using function: 8regs (1044 MB/sec) [ 3.628594] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.629221] io scheduler mq-deadline registered [ 3.629891] io scheduler kyber registered [ 3.630960] io scheduler bfq registered [ 3.638872] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 3.641958] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 3.645991] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 3.651138] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 3.654572] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 3.656500] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 3.659078] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 3.659911] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 3.662169] versatile-pci 10001000.pci: PCI core found (slot 11) [ 3.665068] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 3.665923] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.667048] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.667544] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 3.668003] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 3.670939] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 3.672418] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 3.672960] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 3.673352] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 3.679003] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 3.679528] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 3.680013] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.680489] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 3.681991] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 3.682464] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 3.682846] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.684119] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 3.684545] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.685848] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 3.686319] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.688568] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 3.689082] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 3.689465] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.691785] PCI: bus0: Fast back to back transfers disabled [ 3.693966] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 3.694871] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 3.695603] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 3.696159] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 3.697049] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 3.697574] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 3.698138] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 3.698741] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 3.699318] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.700078] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 3.700922] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 3.701665] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 3.705139] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 3.711458] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.713970] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.721720] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 3.729676] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 3.734617] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 3.739871] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 3.747472] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.792800] random: crng init done [ 3.801877] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 3.804051] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.804183] [drm] features: -context_init [ 3.810509] [drm] number of scanouts: 1 [ 3.810931] [drm] number of cap sets: 0 [ 3.836355] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 4.051651] Console: switching to colour frame buffer device 160x50 [ 4.117447] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.128814] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 4.134229] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.284832] brd: module loaded [ 4.287486] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 4.298224] virtio_blk virtio3: [vda] 950158 512-byte logical blocks (486 MB/464 MiB) [ 4.347874] physmap-flash 34000000.flash: versatile/realview flash protection [ 4.387419] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 4.393212] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 4.395366] Intel/Sharp Extended Query Table at 0x0031 [ 4.397623] Using buffer write method [ 4.464192] smc91x: not found (-19). [ 4.465650] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 4.471042] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 4.533723] rtc-ds1307 0-0068: registered as rtc0 [ 4.545998] rtc-ds1307 0-0068: setting system clock to 2024-02-10T23:41:15 UTC (1707608475) [ 4.562628] rtc-pl031 101e8000.rtc: registered as rtc1 [ 4.569047] i2c_dev: i2c /dev entries driver [ 4.573301] versatile reboot driver registered [ 4.581714] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4.612525] leds-syscon 10000008.0.led: registered LED (null) [ 4.615175] leds-syscon 10000008.1.led: registered LED (null) [ 4.626417] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 4.634258] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 4.645940] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 4.655388] leds-syscon 10000008.2.led: registered LED (null) [ 4.658493] leds-syscon 10000008.3.led: registered LED (null) [ 4.660638] leds-syscon 10000008.4.led: registered LED (null) [ 4.678634] leds-syscon 10000008.5.led: registered LED (null) [ 4.681873] leds-syscon 10000008.6.led: registered LED (null) [ 4.684160] leds-syscon 10000008.7.led: registered LED (null) [ 4.698733] ledtrig-cpu: registered to indicate activity on CPUs [ 4.706045] usbcore: registered new interface driver usbhid [ 4.708013] usbhid: USB HID core driver [ 4.765200] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.766169] aaci-pl041 10004000.aaci: FIFO 512 entries [ 4.769649] u32 classifier [ 4.770058] input device check on [ 4.770463] Actions configured [ 4.773750] NET: Registered PF_INET6 protocol family [ 4.795994] Segment Routing with IPv6 [ 4.808018] In-situ OAM (IOAM) with IPv6 [ 4.810643] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.831192] NET: Registered PF_PACKET protocol family [ 4.833568] Bridge firewalling registered [ 4.847788] Key type dns_resolver registered [ 4.853026] NET: Registered PF_VSOCK protocol family [ 4.976620] registered taskstats version 1 [ 5.089919] Key type .fscrypt registered [ 5.090630] Key type fscrypt-provisioning registered [ 5.113657] Btrfs loaded, zoned=no, fsverity=no [ 5.139420] Key type encrypted registered [ 5.150709] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.151827] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.154182] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.160089] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.161245] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.163682] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.169773] printk: console [netcon0] enabled [ 5.170735] netconsole: network logging started [ 5.341959] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 5.359936] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.360544] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.362381] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.427623] IP-Config: Complete: [ 5.428042] device=eth0, hwaddr=52:54:00:12:34:0a, ipaddr=192.168.7.10, mask=255.255.255.0, gw=192.168.7.9 [ 5.428869] host=192.168.7.10, domain=, nis-domain=(none) [ 5.429239] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.429325] nameserver0=8.8.8.8 [ 5.436012] clk: Disabling unused clocks [ 5.444404] ALSA device list: [ 5.444924] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 5.454359] md: Waiting for all devices to be available before autodetect [ 5.454851] md: If you don't use raid, use raid=noautodetect [ 5.455292] md: Autodetecting RAID arrays. [ 5.455610] md: autorun ... [ 5.455856] md: ... autorun DONE. [ 5.678663] EXT4-fs (vda): mounted filesystem bb85da21-a259-4bbf-8e55-9b2934e48c3c r/w with ordered data mode. Quota mode: disabled. [ 5.680208] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.684368] devtmpfs: mounted [ 5.749271] Freeing unused kernel image (initmem) memory: 468K [ 5.750428] Kernel memory protection not selected by kernel config. [ 5.751766] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 12.338097] udevd[97]: starting version 3.2.14 [ 12.806596] udevd[98]: starting eudev-3.2.14 [ 15.872413] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 15.873723] clcd-pl11x: probe of 10120000.display failed with error -2 [ 15.876388] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 15.917342] amba 10100000.smc: deferred probe pending [ 15.918180] amba 10110000.mpmc: deferred probe pending [ 15.918775] amba 101e0000.sctl: deferred probe pending [ 15.919294] amba 101e1000.watchdog: deferred probe pending [ 15.919884] amba 101f0000.sci: deferred probe pending [ 15.920468] amba 101f4000.spi: deferred probe pending [ 15.921039] amba 1000a000.sci: deferred probe pending [ 15.921601] amba 10120000.display: deferred probe pending [ 46.360235] EXT4-fs (vda): re-mounted bb85da21-a259-4bbf-8e55-9b2934e48c3c r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.15-yocto-standard #1 PREEMPT Sun Feb 4 12:10:03 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.10::192.168.7.9:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb 10 23:42:15 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-4f9b1d7ec20e83b2ed03221a96f54fb8cf2eabed qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-THdc7AVWds,guid=3e8f6975eeaa5afa5714659b65c809f0 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused Matchbox: error parsing /usr/share/themes/Sato/matchbox/theme.xml Error loading resource from dbus-daemon[530]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=512 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[530]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry