[ 0.000000] Linux version 6.6.16-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Wed Feb 14 15:32:22 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40736 r8192 d20704 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238392K/262140K available (14201K kernel code, 1473K rwdata, 3624K rodata, 404K init, 402K bss, 23748K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.01 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945176889 ns [ 0.000225] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421547516ns [ 0.023319] Console: colour dummy device 80x25 [ 0.028777] printk: console [tty0] enabled [ 0.033366] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.16-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Wed Feb 14 15:32:22 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40736 r8192 d20704 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238392K/262140K available (14201K kernel code, 1473K rwdata, 3624K rodata, 404K init, 402K bss, 23748K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.01 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945176889 ns [ 0.000225] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421547516ns [ 0.023319] Console: colour dummy device 80x25 [ 0.028777] printk: console [tty0] enabled [ 0.033366] printk: bootconsole [uart8250] disabled [ 0.041682] Calibrating delay loop... 1156.71 BogoMIPS (lpj=5783552) [ 0.088123] pid_max: default: 32768 minimum: 301 [ 0.090926] LSM: initializing lsm=capability,landlock,integrity [ 0.092141] landlock: Up and running. [ 0.097534] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097916] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.175111] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.176610] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.177725] Performance counters: No available PMU. [ 0.180536] rcu: Hierarchical SRCU implementation. [ 0.180700] rcu: Max phase no-delay instances is 1000. [ 0.196128] smp: Bringing up secondary CPUs ... [ 0.196898] smp: Brought up 1 node, 1 CPU [ 0.222338] devtmpfs: initialized [ 0.237446] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.237981] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.255793] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.686702] raid6: int32x8 gen() 156 MB/s [ 1.038300] raid6: int32x4 gen() 363 MB/s [ 1.404955] raid6: int32x2 gen() 481 MB/s [ 1.765177] raid6: int32x1 gen() 383 MB/s [ 1.765522] raid6: using algorithm int32x2 gen() 481 MB/s [ 2.031678] raid6: .... xor() 272 MB/s, rmw enabled [ 2.031874] raid6: using intx1 recovery algorithm [ 2.037128] SCSI subsystem initialized [ 2.038256] usbcore: registered new interface driver usbfs [ 2.038884] usbcore: registered new interface driver hub [ 2.039322] usbcore: registered new device driver usb [ 2.040040] pps_core: LinuxPPS API ver. 1 registered [ 2.040147] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.040448] PTP clock support registered [ 2.068778] PCI host bridge to bus 0000:00 [ 2.069363] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.070099] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.070375] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.073086] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 2.074519] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 2.074724] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.074908] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.075040] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.075185] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.075302] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.083377] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.084609] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.085513] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.085824] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.085971] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.086147] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.086286] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.087225] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.087824] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.089338] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.094622] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.095076] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.096530] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.096767] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.097047] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.097246] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.098686] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.098954] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.099219] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.099480] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.100476] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.100712] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.100926] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.101640] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.101782] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.101905] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.102764] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.104387] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.104759] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.104916] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.105057] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.105383] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.105584] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.105793] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.106001] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.106163] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.106281] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.106366] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.106448] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.110193] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 2.110527] pci 0000:00:12.0: vgaarb: bridge control possible [ 2.110728] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.110888] vgaarb: loaded [ 2.115501] clocksource: Switched to clocksource MIPS [ 2.211733] NET: Registered PF_INET protocol family [ 2.214636] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.230090] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.230547] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.230796] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.231250] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 2.231633] TCP: Hash tables configured (established 2048 bind 2048) [ 2.234084] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.234946] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.238259] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.243923] RPC: Registered named UNIX socket transport module. [ 2.244241] RPC: Registered udp transport module. [ 2.244529] RPC: Registered tcp transport module. [ 2.244624] RPC: Registered tcp-with-tls transport module. [ 2.244716] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.246266] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 2.247959] PCI: CLS 0 bytes, default 16 [ 2.265779] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.273725] NFS: Registering the id_resolver key type [ 2.276752] Key type id_resolver registered [ 2.276956] Key type id_legacy registered [ 2.282468] Key type cifs.idmap registered [ 2.991241] xor: measuring software checksum speed [ 3.010281] 8regs : 559 MB/sec [ 3.029691] 8regs_prefetch : 532 MB/sec [ 3.048080] 32regs : 560 MB/sec [ 3.067689] 32regs_prefetch : 528 MB/sec [ 3.068032] xor: using function: 32regs (560 MB/sec) [ 3.068953] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.069361] io scheduler mq-deadline registered [ 3.069564] io scheduler kyber registered [ 3.081090] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 3.087527] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 3.089588] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 3.093651] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.109381] printk: console [ttyS0] disabled [ 3.150919] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.151289] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 3.155660] printk: console [ttyS0] enabled [ 3.281408] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.282641] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 3.284025] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 3.305804] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 3.315602] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 3.317822] [drm] Found bochs VGA, ID 0xb0c5. [ 3.318564] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 3.328368] [drm] Found EDID data blob. [ 3.769386] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 3.843403] Console: switching to colour frame buffer device 160x50 [ 3.882806] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 3.917216] brd: module loaded [ 3.918648] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 3.925288] virtio_blk virtio2: [vda] 1135944 512-byte logical blocks (582 MB/555 MiB) [ 3.953100] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 3.955171] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 3.956909] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 3.967714] hub 1-0:1.0: USB hub found [ 3.968940] hub 1-0:1.0: 2 ports detected [ 3.977098] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.978548] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.985519] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.989271] usbcore: registered new interface driver usbhid [ 3.989820] usbhid: USB HID core driver [ 3.990795] u32 classifier [ 3.991112] input device check on [ 3.991477] Actions configured [ 3.993143] NET: Registered PF_INET6 protocol family [ 4.009928] Segment Routing with IPv6 [ 4.010842] In-situ OAM (IOAM) with IPv6 [ 4.012476] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.017225] NET: Registered PF_PACKET protocol family [ 4.018952] Bridge firewalling registered [ 4.020935] Key type dns_resolver registered [ 4.022342] NET: Registered PF_VSOCK protocol family [ 4.056140] registered taskstats version 1 [ 4.085461] Key type .fscrypt registered [ 4.094402] Key type fscrypt-provisioning registered [ 4.117528] Btrfs loaded, zoned=no, fsverity=no [ 4.159695] Key type encrypted registered [ 4.175189] printk: console [netcon0] enabled [ 4.183676] netconsole: network logging started [ 4.254627] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 4.531218] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input2 [ 4.547443] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 4.631792] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1 [ 4.725355] IP-Config: Complete: [ 4.747513] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 4.769865] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 4.784678] host=192.168.7.4, domain=, nis-domain=(none) [ 4.792406] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.792547] nameserver0=8.8.8.8 [ 4.847531] clk: Disabling unused clocks [ 4.870769] md: Waiting for all devices to be available before autodetect [ 4.883817] md: If you don't use raid, use raid=noautodetect [ 4.890521] md: Autodetecting RAID arrays. [ 4.912808] md: autorun ... [ 4.921892] md: ... autorun DONE. [ 5.009191] EXT4-fs (vda): mounted filesystem a2643598-75e8-4e43-9df8-81bb4f162e37 r/w with ordered data mode. Quota mode: disabled. [ 5.026868] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.037539] devtmpfs: mounted [ 5.117584] Freeing unused kernel image (initmem) memory: 404K [ 5.124391] This architecture does not have kernel memory protection. [ 5.129262] Run /sbin/init as init process [ 5.173414] process '/sbin/init.sysvinit' started with executable stack [ 8.478362] udevd[92]: starting version 3.2.14 [ 8.662128] udevd[93]: starting eudev-3.2.14 [ 22.596779] EXT4-fs (vda): re-mounted a2643598-75e8-4e43-9df8-81bb4f162e37 r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: bootlogd: writing to console: Input/output error Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.16-yocto-standard #1 SMP PREEMPT Wed Feb 14 15:32:22 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Starting rpcbind daemon...Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 18 05:14:49 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-a277d1f7a0dc716b497fd855f20cbd6a7d488f8b qemumips /dev/ttyS0 qemumips login: