[ 0.000000] Linux version 6.6.16-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT_DYNAMIC Wed Feb 14 15:32:08 UTC 2024 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 414641465 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000007] tsc: Detected 2599.996 MHz processor [ 0.001054] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001083] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001086] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.010674] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.010795] ACPI: Early table checksum verification disabled [ 0.010808] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS ) [ 0.010816] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010833] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010840] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010844] ACPI: FACS 0x000000001FFE0000 000040 [ 0.010848] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010852] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010856] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010861] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.010864] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a] [ 0.010865] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216] [ 0.010866] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.010867] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a] [ 0.010868] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2] [ 0.010868] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e] [ 0.010869] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436] [ 0.010928] Zone ranges: [ 0.010929] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.010931] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.010933] Normal empty [ 0.010934] Movable zone start for each node [ 0.010934] Early memory node ranges [ 0.010935] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.010936] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.010939] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.011428] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.011444] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.013387] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.013893] ACPI: PM-Timer IO Port: 0x608 [ 0.013905] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.013953] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.013957] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.013959] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.013960] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.013966] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.013967] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.013972] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.013974] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.013978] TSC deadline timer available [ 0.013979] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.013995] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.014016] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.014018] Booting paravirtualized kernel on KVM [ 0.014020] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.014024] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.014732] percpu: Embedded 56 pages/cpu s190568 r8192 d30616 u524288 [ 0.014761] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.014860] random: crng init done [ 0.014921] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.014953] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.015054] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.015709] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.017066] Memory: 477740K/523736K available (18432K kernel code, 2315K rwdata, 5236K rodata, 3380K init, 2320K bss, 45736K reserved, 0K cma-reserved) [ 0.017105] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.017116] Kernel/User page tables isolation: enabled [ 0.017146] ftrace: allocating 50993 entries in 200 pages [ 0.029088] ftrace: allocated 200 pages with 3 groups [ 0.029150] Dynamic Preempt: full [ 0.029691] rcu: Preemptible hierarchical RCU implementation. [ 0.029692] rcu: RCU event tracing is enabled. [ 0.029693] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.029694] All grace periods are expedited (rcu_expedited). [ 0.029695] Trampoline variant of Tasks RCU enabled. [ 0.029695] Rude variant of Tasks RCU enabled. [ 0.029695] Tracing variant of Tasks RCU enabled. [ 0.029696] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.029697] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.033257] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.033450] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.033583] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.040288] Console: colour VGA+ 80x25 [ 0.040330] printk: console [ttyS0] enabled [ 0.173351] ACPI: Core revision 20230628 [ 0.174272] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.176166] APIC: Switch to symmetric I/O mode setup [ 0.177871] x2apic enabled [ 0.178889] APIC: Switched APIC routing to: physical x2apic [ 0.181147] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.182351] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.185854] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.186993] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.187856] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.188857] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.189857] Spectre V2 : Mitigation: Retpolines [ 0.190856] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.191856] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.192857] Speculative Store Bypass: Vulnerable [ 0.193858] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.194857] MMIO Stale Data: Unknown: No mitigations [ 0.195857] SRBDS: Unknown: Dependent on hypervisor status [ 0.196875] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.197856] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.198856] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.199856] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.200855] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.224794] Freeing SMP alternatives memory: 52K [ 0.224858] pid_max: default: 32768 minimum: 301 [ 0.225881] LSM: initializing lsm=capability,landlock,integrity [ 0.226862] landlock: Up and running. [ 0.227887] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.228858] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.230180] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.231033] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.231879] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.232881] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.233882] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.234891] signal: max sigframe size: 1776 [ 0.235778] rcu: Hierarchical SRCU implementation. [ 0.235857] rcu: Max phase no-delay instances is 400. [ 0.237081] smp: Bringing up secondary CPUs ... [ 0.237980] smpboot: x86: Booting SMP configuration: [ 0.238863] .... node #0, CPUs: #1 #2 #3 [ 0.239248] smp: Brought up 1 node, 4 CPUs [ 0.240744] smpboot: Max logical packages: 1 [ 0.240858] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.242144] devtmpfs: initialized [ 0.243022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.243860] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.245400] pinctrl core: initialized pinctrl subsystem [ 0.246827] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.247013] thermal_sys: Registered thermal governor 'step_wise' [ 0.247015] thermal_sys: Registered thermal governor 'user_space' [ 0.247871] cpuidle: using governor menu [ 0.249859] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.250858] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.251868] PCI: Using configuration type 1 for base access [ 0.253026] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.270857] raid6: sse2x4 gen() 13706 MB/s [ 0.287859] raid6: sse2x2 gen() 12956 MB/s [ 0.305856] raid6: sse2x1 gen() 10069 MB/s [ 0.306859] raid6: using algorithm sse2x4 gen() 13706 MB/s [ 0.324857] raid6: .... xor() 7625 MB/s, rmw enabled [ 0.325858] raid6: using ssse3x2 recovery algorithm [ 0.326944] ACPI: Added _OSI(Module Device) [ 0.327824] ACPI: Added _OSI(Processor Device) [ 0.327858] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.328857] ACPI: Added _OSI(Processor Aggregator Device) [ 0.330806] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.335858] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.336983] ACPI: Interpreter enabled [ 0.337838] ACPI: PM: (supports S0 S3 S5) [ 0.337858] ACPI: Using IOAPIC for interrupt routing [ 0.338907] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.339858] PCI: Using E820 reservations for host bridge windows [ 0.340965] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.344039] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.344862] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.345908] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.346922] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.347941] PCI host bridge to bus 0000:00 [ 0.348732] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.348858] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.349858] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.350858] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.351857] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.352858] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.353858] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.355653] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.356424] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.357858] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.359858] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.363859] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.365859] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.367564] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.368860] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.370861] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.375715] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.377623] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.379451] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.381894] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.383888] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.387890] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.388969] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.390673] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.391859] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.393860] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.397859] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.400633] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.402691] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.403791] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.405859] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.409070] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.411859] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.413847] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.414734] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.417079] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.418354] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.419689] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.422859] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.424541] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.426614] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.428701] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.429993] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.430940] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.431932] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.432931] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.433940] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.434972] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.435936] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.436936] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.437895] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.438908] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.439867] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.440867] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.441867] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.442866] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.443866] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.444866] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.446355] iommu: Default domain type: Translated [ 0.446857] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.447975] SCSI subsystem initialized [ 0.448857] ACPI: bus type USB registered [ 0.449618] usbcore: registered new interface driver usbfs [ 0.449868] usbcore: registered new interface driver hub [ 0.450816] usbcore: registered new device driver usb [ 0.450877] pps_core: LinuxPPS API ver. 1 registered [ 0.451750] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.451862] PTP clock support registered [ 0.453127] Bluetooth: Core ver 2.22 [ 0.453798] NET: Registered PF_BLUETOOTH protocol family [ 0.453857] Bluetooth: HCI device and connection manager initialized [ 0.454864] Bluetooth: HCI socket layer initialized [ 0.455735] Bluetooth: L2CAP socket layer initialized [ 0.455868] Bluetooth: SCO socket layer initialized [ 0.456880] PCI: Using ACPI for IRQ routing [ 0.517375] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.517853] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.517853] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.517861] vgaarb: loaded [ 0.518402] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.518857] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.523951] clocksource: Switched to clocksource kvm-clock [ 0.525041] pnp: PnP ACPI init [ 0.525772] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.527259] pnp: PnP ACPI: found 5 devices [ 0.534744] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.536404] NET: Registered PF_INET protocol family [ 0.537853] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.539349] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.540859] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.542207] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.543546] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.544825] TCP: Hash tables configured (established 4096 bind 4096) [ 0.545960] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.547092] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.548356] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.549675] RPC: Registered named UNIX socket transport module. [ 0.550728] RPC: Registered udp transport module. [ 0.551612] RPC: Registered tcp transport module. [ 0.552450] RPC: Registered tcp-with-tls transport module. [ 0.554309] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.555444] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.556525] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.557607] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.558793] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.559990] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.561183] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.562669] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.564219] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.565695] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.567166] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.568707] PCI: CLS 0 bytes, default 64 [ 0.569666] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.571160] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.573845] Initialise system trusted keyrings [ 0.574785] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.576183] NFS: Registering the id_resolver key type [ 0.577139] Key type id_resolver registered [ 0.577912] Key type id_legacy registered [ 0.579045] Key type cifs.idmap registered [ 0.594240] xor: automatically using best checksumming function avx [ 0.595620] Key type asymmetric registered [ 0.596350] Asymmetric key parser 'x509' registered [ 0.597220] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.598516] io scheduler mq-deadline registered [ 0.599303] io scheduler kyber registered [ 0.600046] io scheduler bfq registered [ 0.601058] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.603571] ACPI: button: Power Button [PWRF] [ 0.606885] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.612551] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.619424] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.627035] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.631466] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.634603] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.638223] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.645198] Linux agpgart interface v0.103 [ 0.647206] ACPI: bus type drm_connector registered [ 0.649617] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.651932] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.660814] Console: switching to colour dummy device 80x25 [ 0.663479] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.663483] [drm] features: -context_init [ 0.669369] [drm] number of scanouts: 1 [ 0.675426] [drm] number of cap sets: 0 [ 0.678744] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 0.686188] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.702065] Console: switching to colour frame buffer device 160x50 [ 0.720643] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.724784] brd: module loaded [ 0.726579] loop: module loaded [ 0.727363] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.729974] virtio_blk virtio3: [vda] 797830 512-byte logical blocks (408 MB/390 MiB) [ 0.733963] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.735510] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.737623] scsi host0: ahci [ 0.738539] scsi host1: ahci [ 0.739380] scsi host2: ahci [ 0.740221] scsi host3: ahci [ 0.741077] scsi host4: ahci [ 0.741957] scsi host5: ahci [ 0.742566] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.743948] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.745306] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.746696] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.748088] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.749471] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.752226] e100: Intel(R) PRO/100 Network Driver [ 0.753189] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.754245] e1000: Intel(R) PRO/1000 Network Driver [ 0.755169] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.756293] e1000e: Intel(R) PRO/1000 Network Driver [ 0.757417] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.758753] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.760010] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.762106] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.763499] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.765199] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.766691] hub 1-0:1.0: USB hub found [ 0.767412] hub 1-0:1.0: 2 ports detected [ 0.768470] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.770502] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.773292] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.781461] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.783607] hub 2-0:1.0: USB hub found [ 0.784336] hub 2-0:1.0: 6 ports detected [ 0.806625] hub 1-0:1.0: USB hub found [ 0.808419] hub 1-0:1.0: 2 ports detected [ 0.810426] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.811768] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.813770] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.815489] hub 3-0:1.0: USB hub found [ 0.816219] hub 3-0:1.0: 2 ports detected [ 0.817659] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.818625] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.820094] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.821431] hub 4-0:1.0: USB hub found [ 0.822138] hub 4-0:1.0: 2 ports detected [ 0.823176] usbcore: registered new interface driver usb-storage [ 0.824341] usbcore: registered new interface driver usbserial_generic [ 0.825625] usbserial: USB Serial support registered for generic [ 0.826720] usbcore: registered new interface driver ftdi_sio [ 0.827737] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.829037] usbcore: registered new interface driver pl2303 [ 0.830027] usbserial: USB Serial support registered for pl2303 [ 0.831117] i8042: PNP: No PS/2 controller found. [ 0.832033] mousedev: PS/2 mouse device common for all mice [ 0.833186] rtc_cmos 00:03: RTC can wake from S4 [ 0.834589] rtc_cmos 00:03: registered as rtc0 [ 0.835482] rtc_cmos 00:03: setting system clock to 2024-02-19T09:01:58 UTC (1708333318) [ 0.836986] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.838643] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.839000] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.840426] intel_pstate: CPU model not supported [ 0.842223] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.842967] sdhci: Secure Digital Host Controller Interface driver [ 0.844592] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.845683] sdhci: Copyright(c) Pierre Ossman [ 0.845703] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.849772] usbcore: registered new interface driver usbhid [ 0.850844] usbhid: USB HID core driver [ 0.851544] u32 classifier [ 0.852065] input device check on [ 0.852738] Actions configured [ 0.853421] NET: Registered PF_INET6 protocol family [ 0.855733] Segment Routing with IPv6 [ 0.856450] In-situ OAM (IOAM) with IPv6 [ 0.857182] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.858373] NET: Registered PF_PACKET protocol family [ 0.859305] Bridge firewalling registered [ 0.860082] Key type dns_resolver registered [ 0.860951] NET: Registered PF_VSOCK protocol family [ 0.862203] IPI shorthand broadcast: enabled [ 0.864430] sched_clock: Marking stable (717002475, 147395409)->(977832083, -113434199) [ 0.865985] registered taskstats version 1 [ 0.866755] Loading compiled-in X.509 certificates [ 0.869013] Key type .fscrypt registered [ 0.869718] Key type fscrypt-provisioning registered [ 0.870977] Btrfs loaded, zoned=no, fsverity=no [ 0.872487] Key type encrypted registered [ 0.873566] printk: console [netcon0] enabled [ 0.874362] netconsole: network logging started [ 1.022451] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.058807] ata4: SATA link down (SStatus 0 SControl 300) [ 1.060611] ata6: SATA link down (SStatus 0 SControl 300) [ 1.061831] ata5: SATA link down (SStatus 0 SControl 300) [ 1.063234] ata1: SATA link down (SStatus 0 SControl 300) [ 1.064667] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.066554] ata2: SATA link down (SStatus 0 SControl 300) [ 1.067637] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.069243] ata3.00: applying bridge limits [ 1.070613] ata3.00: configured for UDMA/100 [ 1.072144] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.090880] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 1.092194] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.111451] IP-Config: Complete: [ 1.112092] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 1.113845] host=192.168.7.2, domain=, nis-domain=(none) [ 1.114907] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 1.114910] nameserver0=8.8.8.8 [ 1.117004] clk: Disabling unused clocks [ 1.118031] md: Waiting for all devices to be available before autodetect [ 1.118973] md: If you don't use raid, use raid=noautodetect [ 1.119766] md: Autodetecting RAID arrays. [ 1.120341] md: autorun ... [ 1.120736] md: ... autorun DONE. [ 1.127494] EXT4-fs (vda): mounted filesystem 16153dda-bea9-442a-a1aa-1eda737b1682 r/w with ordered data mode. Quota mode: disabled. [ 1.129527] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 1.130597] devtmpfs: mounted [ 1.133044] Freeing unused kernel image (initmem) memory: 3380K [ 1.134121] Write protecting the kernel read-only data: 24576k [ 1.135501] Freeing unused kernel image (rodata/data gap) memory: 908K [ 1.136627] Run /sbin/init as init process INIT: version 3.04 booting [ 1.157172] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.160894] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 1.247665] udevd[139]: starting version 3.2.14 [ 1.255209] udevd[140]: starting eudev-3.2.14 [ 1.276754] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.410356] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.463851] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.532762] EXT4-fs (vda): re-mounted 16153dda-bea9-442a-a1aa-1eda737b1682 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seat.c:39] Created VT-bound seat seat0 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seatd.c:194] seatd started Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... 00:00:00.152  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 344, uid: 1000, gid: 1000) 00:00:00.152  [c/debug/seatd/0.8.0/seatd/seat.c:170] Added client 2 to seat0 00:00:00.152  [c/debug/seatd/0.8.0/seatd/seat.c:480] Opened client 2 on seat0 [ 2.095116] weston[344]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set could not load cursor 'dnd-move' could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' could not load cursor 'dnd-none' Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCysQFnyGHWecPoTJWc+dvaC0avLmPgZRKP4DztryO7QsPIuetZeVi6yJstVPRS3zJrPPFQxW3rtW7LPWXM/bH/XjFYR1T+eM9FgHS1kE1sJQeF7a0buOylqRvESe9aWNxakwed1v22r2pMPIQT66aZTQ+wr5gzOU4qcpziNJ1HzYwcMK8WYyT4VxLy3r6mqNDxcVVJ6Z80J6FMvZfEN9iwjGif+vWeOwbVd2VPDHendMDEyrTGD8rAgR24cUBv4adb6IhJX2tHOGwVBai3BBieKVFn0Ob64DCjE5OGxBwKDONsv4PxlzqWnxYG/fwVMACZziAteFcl5IcrAKrIJ0q1 root@qemux86-64 Fingerprint: SHA256:AChaEoESBezWwIgU1fTECgFAPS9M69UXIZh9+6GMFas dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: [ 2.753802] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 done [ 2.754925] Bluetooth: BNEP filters: protocol multicast [ 2.755845] Bluetooth: BNEP socket layer initialized * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-0e8093d3b9982150ef370cc81b5a8876b684a783 qemux86-64 /dev/ttyS0 qemux86-64 login: 00:01:28.340  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 5945, uid: 0, gid: 0) 00:01:28.340  [c/debug/seatd/0.8.0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client 00:01:28.340  [c/debug/seatd/0.8.0/seatd/client.c:177] Could not add client to target seat: Device or resource busy