[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.16-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Wed Feb 14 15:32:08 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10642K kernel code, 1424K rwdata, 2836K rodata, 468K init, 340K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42216 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000406] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001557] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.012766] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.031087] Console: colour dummy device 80x30 [ 0.034811] Calibrating delay loop... 462.02 BogoMIPS (lpj=2310144) [ 0.078869] CPU: Testing write buffer coherency: ok [ 0.082442] pid_max: default: 32768 minimum: 301 [ 0.085925] LSM: initializing lsm=capability,landlock,integrity [ 0.088396] landlock: Up and running. [ 0.095588] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.095882] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.255771] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.258403] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.264775] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.278968] Setting up static identity map for 0x8400 - 0x8458 [ 0.285528] rcu: Hierarchical SRCU implementation. [ 0.285727] rcu: Max phase no-delay instances is 1000. [ 0.324224] devtmpfs: initialized [ 0.371620] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.375961] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.376339] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.403622] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.414710] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.459500] platform vga: Fixed dependency cycle(s) with /bridge/ports/port@1/endpoint [ 0.503407] amba 10120000.display: Fixed dependency cycle(s) with /bridge/ports/port@0/endpoint [ 0.520184] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000/port@0/endpoint@0 [ 0.536811] Serial: AMBA PL011 UART driver [ 0.562336] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.565277] printk: console [ttyAMA0] enabled [ 0.643851] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.666343] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.676838] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.682654] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.702046] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.119013] raid6: int32x8 gen() 33 MB/s [ 1.450170] raid6: int32x4 gen() 59 MB/s [ 1.787960] raid6: int32x2 gen() 155 MB/s [ 2.127893] raid6: int32x1 gen() 228 MB/s [ 2.133817] raid6: using algorithm int32x1 gen() 228 MB/s [ 2.497943] raid6: .... xor() 110 MB/s, rmw enabled [ 2.504741] raid6: using intx1 recovery algorithm [ 2.536785] SCSI subsystem initialized [ 2.561727] usbcore: registered new interface driver usbfs [ 2.579440] usbcore: registered new interface driver hub [ 2.587043] usbcore: registered new device driver usb [ 2.619603] pps_core: LinuxPPS API ver. 1 registered [ 2.647958] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.668534] PTP clock support registered [ 2.694750] Advanced Linux Sound Architecture Driver Initialized. [ 2.804095] vgaarb: loaded [ 2.822334] clocksource: Switched to clocksource arm,sp804 [ 3.869326] NET: Registered PF_INET protocol family [ 3.874436] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.896386] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.897519] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.898176] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.898828] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.899685] TCP: Hash tables configured (established 2048 bind 2048) [ 3.903762] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.905367] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.910532] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.922773] RPC: Registered named UNIX socket transport module. [ 3.930571] RPC: Registered udp transport module. [ 3.931988] RPC: Registered tcp transport module. [ 3.934035] RPC: Registered tcp-with-tls transport module. [ 3.934798] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.935876] PCI: CLS 0 bytes, default 32 [ 3.938300] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.965045] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.982723] NFS: Registering the id_resolver key type [ 3.997132] Key type id_resolver registered [ 4.001611] Key type id_legacy registered [ 4.016315] Key type cifs.idmap registered [ 4.614700] xor: measuring software checksum speed [ 4.637254] arm4regs : 507 MB/sec [ 4.683281] 8regs : 255 MB/sec [ 4.708760] 32regs : 708 MB/sec [ 4.709819] xor: using function: 32regs (708 MB/sec) [ 4.712638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 4.723449] io scheduler mq-deadline registered [ 4.726857] io scheduler kyber registered [ 4.728761] io scheduler bfq registered [ 4.744070] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 4.768575] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 4.773873] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 4.779918] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 4.785093] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 4.789231] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 4.792589] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 4.794353] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 4.798721] versatile-pci 10001000.pci: PCI core found (slot 11) [ 4.804621] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 4.806157] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.807697] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.808678] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 4.809729] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 4.817594] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 4.825232] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 4.826474] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 4.827879] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 4.838214] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 4.845265] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 4.846913] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.848030] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 4.851194] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 4.852998] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 4.854222] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.857232] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 4.858189] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.860436] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 4.861280] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.865238] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 4.866264] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 4.867238] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.872460] PCI: bus0: Fast back to back transfers disabled [ 4.876287] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 4.877993] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 4.879683] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 4.881088] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 4.881680] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 4.885079] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 4.886955] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 4.888136] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 4.889286] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.890362] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 4.891170] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 4.891584] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 4.899225] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 4.909477] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.917170] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.926334] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 4.934876] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 4.939089] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 4.944561] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 4.952369] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.997306] random: crng init done [ 5.004670] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 5.006932] [drm] features: -virgl +edid -resource_blob -host_visible [ 5.007043] [drm] features: -context_init [ 5.011579] [drm] number of scanouts: 1 [ 5.012812] [drm] number of cap sets: 0 [ 5.095040] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 5.400515] Console: switching to colour frame buffer device 160x50 [ 5.536473] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 5.572046] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 5.577586] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.825500] brd: module loaded [ 5.827714] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 5.840358] virtio_blk virtio3: [vda] 950232 512-byte logical blocks (487 MB/464 MiB) [ 5.894590] physmap-flash 34000000.flash: versatile/realview flash protection [ 5.925630] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 5.944495] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 5.950608] Intel/Sharp Extended Query Table at 0x0031 [ 5.963850] Using buffer write method [ 6.255385] smc91x: not found (-19). [ 6.258168] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 6.259810] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 6.341382] rtc-ds1307 0-0068: registered as rtc0 [ 6.355627] rtc-ds1307 0-0068: setting system clock to 2024-02-19T09:08:32 UTC (1708333712) [ 6.373961] rtc-pl031 101e8000.rtc: registered as rtc1 [ 6.377225] i2c_dev: i2c /dev entries driver [ 6.380935] versatile reboot driver registered [ 6.389134] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 6.430594] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 6.445018] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 6.457127] leds-syscon 10000008.0.led: registered LED (null) [ 6.460602] leds-syscon 10000008.1.led: registered LED (null) [ 6.465651] leds-syscon 10000008.2.led: registered LED (null) [ 6.534253] leds-syscon 10000008.3.led: registered LED (null) [ 6.540840] leds-syscon 10000008.4.led: registered LED (null) [ 6.545079] leds-syscon 10000008.5.led: registered LED (null) [ 6.547945] leds-syscon 10000008.6.led: registered LED (null) [ 6.550221] leds-syscon 10000008.7.led: registered LED (null) [ 6.554469] ledtrig-cpu: registered to indicate activity on CPUs [ 6.569874] usbcore: registered new interface driver usbhid [ 6.570898] usbhid: USB HID core driver [ 6.644189] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 6.645458] aaci-pl041 10004000.aaci: FIFO 512 entries [ 6.648739] u32 classifier [ 6.649200] input device check on [ 6.649626] Actions configured [ 6.655920] NET: Registered PF_INET6 protocol family [ 6.680346] Segment Routing with IPv6 [ 6.681789] In-situ OAM (IOAM) with IPv6 [ 6.686485] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.698209] NET: Registered PF_PACKET protocol family [ 6.700821] Bridge firewalling registered [ 6.705229] Key type dns_resolver registered [ 6.708753] NET: Registered PF_VSOCK protocol family [ 6.865428] registered taskstats version 1 [ 6.990832] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input1 [ 7.028554] Key type .fscrypt registered [ 7.029409] Key type fscrypt-provisioning registered [ 7.117704] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input2 [ 7.123093] Btrfs loaded, zoned=no, fsverity=no [ 7.151011] Key type encrypted registered [ 7.165678] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 7.167019] clcd-pl11x: probe of 10120000.display failed with error -2 [ 7.169789] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 7.177125] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 7.178419] clcd-pl11x: probe of 10120000.display failed with error -2 [ 7.181265] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 7.188505] printk: console [netcon0] enabled [ 7.189534] netconsole: network logging started [ 7.335840] IP-Config: Complete: [ 7.336747] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 7.338738] host=192.168.7.4, domain=, nis-domain=(none) [ 7.339633] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 7.339813] nameserver0=8.8.8.8 [ 7.351119] clk: Disabling unused clocks [ 7.354364] ALSA device list: [ 7.355123] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 7.372851] md: Waiting for all devices to be available before autodetect [ 7.373906] md: If you don't use raid, use raid=noautodetect [ 7.374743] md: Autodetecting RAID arrays. [ 7.375381] md: autorun ... [ 7.375924] md: ... autorun DONE. [ 7.741531] EXT4-fs (vda): mounted filesystem f39918bb-b48b-448a-9bca-fc87e9f7945a r/w with ordered data mode. Quota mode: disabled. [ 7.745805] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 7.754493] devtmpfs: mounted [ 7.848500] Freeing unused kernel image (initmem) memory: 468K [ 7.849603] Kernel memory protection not selected by kernel config. [ 7.851439] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 17.816152] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 17.817474] clcd-pl11x: probe of 10120000.display failed with error -2 [ 17.819962] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 17.824327] amba 10100000.smc: deferred probe pending [ 17.825186] amba 10110000.mpmc: deferred probe pending [ 17.825524] amba 101e0000.sctl: deferred probe pending [ 17.825838] amba 101e1000.watchdog: deferred probe pending [ 17.826155] amba 101f0000.sci: deferred probe pending [ 17.826453] amba 101f4000.spi: deferred probe pending [ 17.826760] amba 1000a000.sci: deferred probe pending [ 17.827055] amba 10120000.display: deferred probe pending [ 19.139770] udevd[96]: starting version 3.2.14 [ 19.906829] udevd[97]: starting eudev-3.2.14 [ 64.506763] EXT4-fs (vda): re-mounted f39918bb-b48b-448a-9bca-fc87e9f7945a r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.16-yocto-standard #1 PREEMPT Wed Feb 14 15:32:08 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 19 09:10:07 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-0e8093d3b9982150ef370cc81b5a8876b684a783 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-a4eyXFGQxy,guid=18889ed44d9875490726ea9665d31b20 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused Matchbox: error parsing /usr/share/themes/Sato/matchbox/theme.xml Error loading resource from dbus-daemon[537]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=517 comm="connman-applet") dbus-daemon[537]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry