[    0.000000] Linux version 5.15.148-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 11.4.0, GNU ld (GNU Binutils) 2.38.20220708) #1 SMP PREEMPT Wed Feb 7 01:17:06 UTC 2024
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 18e2d001, primary cpu clock
[    0.000001] kvm-clock: using sched offset of 334686959 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000005] tsc: Detected 2599.996 MHz processor
[    0.000870] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.000895] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.008299] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.008389] ACPI: Early table checksum verification disabled
[    0.008391] ACPI: RSDP 0x00000000000F5990 000014 (v00 BOCHS )
[    0.008398] ACPI: RSDT 0x000000001FFE246E 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008403] ACPI: FACP 0x000000001FFE224E 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008410] ACPI: DSDT 0x000000001FFE0040 00220E (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008413] ACPI: FACS 0x000000001FFE0000 000040
[    0.008416] ACPI: APIC 0x000000001FFE2342 000090 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008420] ACPI: HPET 0x000000001FFE23D2 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008423] ACPI: MCFG 0x000000001FFE240A 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008427] ACPI: WAET 0x000000001FFE2446 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.008429] ACPI: Reserving FACP table memory at [mem 0x1ffe224e-0x1ffe2341]
[    0.008431] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe224d]
[    0.008432] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.008432] ACPI: Reserving APIC table memory at [mem 0x1ffe2342-0x1ffe23d1]
[    0.008433] ACPI: Reserving HPET table memory at [mem 0x1ffe23d2-0x1ffe2409]
[    0.008434] ACPI: Reserving MCFG table memory at [mem 0x1ffe240a-0x1ffe2445]
[    0.008435] ACPI: Reserving WAET table memory at [mem 0x1ffe2446-0x1ffe246d]
[    0.008480] Zone ranges:
[    0.008481]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008483]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.008484]   Normal   empty
[    0.008485] Movable zone start for each node
[    0.008486] Early memory node ranges
[    0.008486]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.008488]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.008489] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.008886] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.008900] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.010565] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.010948] ACPI: PM-Timer IO Port: 0x608
[    0.010957] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.010989] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.010992] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.010994] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.010995] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.010996] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.010997] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.011000] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.011002] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.011004] TSC deadline timer available
[    0.011006] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.011019] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.011021] Booting paravirtualized kernel on KVM
[    0.011022] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.011026] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.011579] percpu: Embedded 53 pages/cpu s179288 r8192 d29608 u524288
[    0.011606] kvm-guest: stealtime: cpu 0, msr 1f41b140
[    0.011609] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.011610] Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
[    0.011873] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.011986] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.012548] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.013688] Memory: 482200K/523736K available (16395K kernel code, 2128K rwdata, 3624K rodata, 1884K init, 1972K bss, 41276K reserved, 0K cma-reserved)
[    0.013721] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.013727] Kernel/User page tables isolation: enabled
[    0.013742] ftrace: allocating 45552 entries in 178 pages
[    0.032321] ftrace: allocated 178 pages with 4 groups
[    0.032797] rcu: Preemptible hierarchical RCU implementation.
[    0.032799] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.032801] 	All grace periods are expedited (rcu_expedited).
[    0.032802] 	Trampoline variant of Tasks RCU enabled.
[    0.032803] 	Rude variant of Tasks RCU enabled.
[    0.032803] 	Tracing variant of Tasks RCU enabled.
[    0.032804] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.032806] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.036390] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.036684] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.036694] random: crng init done
[    0.041556] Console: colour VGA+ 80x25
[    0.124243] printk: console [ttyS0] enabled
[    0.124760] ACPI: Core revision 20210730
[    0.125816] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.127074] APIC: Switch to symmetric I/O mode setup
[    0.128961] x2apic enabled
[    0.129611] Switched APIC routing to physical x2apic.
[    0.131245] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.132013] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.133398] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996)
[    0.134486] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.135399] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.136132] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.136400] Spectre V2 : Mitigation: Retpolines
[    0.136994] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.137399] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.138399] Speculative Store Bypass: Vulnerable
[    0.139399] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.140208] MMIO Stale Data: Unknown: No mitigations
[    0.140399] SRBDS: Unknown: Dependent on hypervisor status
[    0.141410] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.142399] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.143399] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.144174] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.144399] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.160725] Freeing SMP alternatives memory: 48K
[    0.161323] pid_max: default: 32768 minimum: 301
[    0.161418] LSM: Security Framework initializing
[    0.162406] landlock: Up and running.
[    0.162878] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.163401] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.164660] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.165547] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.166425] signal: max sigframe size: 1776
[    0.166965] rcu: Hierarchical SRCU implementation.
[    0.167595] smp: Bringing up secondary CPUs ...
[    0.168281] x86: Booting SMP configuration:
[    0.168401] .... node  #0, CPUs:      #1
[    0.092806] kvm-clock: cpu 1, msr 18e2d041, secondary cpu clock
[    0.169175] kvm-guest: stealtime: cpu 1, msr 1f49b140
[    0.170479]  #2
[    0.092806] kvm-clock: cpu 2, msr 18e2d081, secondary cpu clock
[    0.170992] kvm-guest: stealtime: cpu 2, msr 1f51b140
[    0.172491]  #3
[    0.092806] kvm-clock: cpu 3, msr 18e2d0c1, secondary cpu clock
[    0.173573] kvm-guest: stealtime: cpu 3, msr 1f59b140
[    0.174403] smp: Brought up 1 node, 4 CPUs
[    0.175406] smpboot: Max logical packages: 1
[    0.176009] smpboot: Total of 4 processors activated (20799.96 BogoMIPS)
[    0.176597] devtmpfs: initialized
[    0.177000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.177409] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.178382] pinctrl core: initialized pinctrl subsystem
[    0.178602] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.179529] thermal_sys: Registered thermal governor 'step_wise'
[    0.179530] thermal_sys: Registered thermal governor 'user_space'
[    0.180401] cpuidle: using governor menu
[    0.181443] ACPI: bus type PCI registered
[    0.182101] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.182402] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820
[    0.183315] PCI: Using configuration type 1 for base access
[    0.184940] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.203399] raid6: sse2x4   gen() 16289 MB/s
[    0.220399] raid6: sse2x4   xor()  7218 MB/s
[    0.237399] raid6: sse2x2   gen() 15928 MB/s
[    0.254399] raid6: sse2x2   xor() 10171 MB/s
[    0.271399] raid6: sse2x1   gen() 12905 MB/s
[    0.288399] raid6: sse2x1   xor()  8131 MB/s
[    0.289021] raid6: using algorithm sse2x4 gen() 16289 MB/s
[    0.289400] raid6: .... xor() 7218 MB/s, rmw enabled
[    0.290101] raid6: using ssse3x2 recovery algorithm
[    0.290472] ACPI: Added _OSI(Module Device)
[    0.291061] ACPI: Added _OSI(Processor Device)
[    0.291400] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.292051] ACPI: Added _OSI(Processor Aggregator Device)
[    0.292401] ACPI: Added _OSI(Linux-Dell-Video)
[    0.293051] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.293405] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.294870] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.296541] ACPI: Interpreter enabled
[    0.297099] ACPI: PM: (supports S0 S3 S5)
[    0.297402] ACPI: Using IOAPIC for interrupt routing
[    0.298064] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.298469] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.300847] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.301405] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.302450] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.303287] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.303435] PCI host bridge to bus 0000:00
[    0.303976] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.304401] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.305375] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.305400] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.306358] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.306400] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.307400] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.308227] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.308917] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.310406] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.312181] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.315935] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.317401] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.318964] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.320401] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.324401] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.326558] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.328994] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.331428] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.333421] pci 0000:00:03.0: reg 0x20: [mem 0xfebd1000-0xfebd1fff]
[    0.335855] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.336497] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.338123] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.339402] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.340929] pci 0000:00:04.0: reg 0x14: [mem 0xfebd2000-0xfebd2fff]
[    0.344140] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.346992] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.348881] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.350170] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.351981] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.353122] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.355161] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.356178] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.356808] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd3000-0xfebd3fff]
[    0.359266] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.360539] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.361636] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.364997] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.366025] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd4000-0xfebd4fff]
[    0.367326] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.369401] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.371501] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.372395] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.373278] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.373484] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.374297] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.374479] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.375350] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.375458] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.376264] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.376409] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.377192] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.377407] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.378281] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.378409] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.379190] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.379406] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.380543] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.381268] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.381404] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.382180] vgaarb: loaded
[    0.382495] SCSI subsystem initialized
[    0.383004] ACPI: bus type USB registered
[    0.383425] usbcore: registered new interface driver usbfs
[    0.384241] usbcore: registered new interface driver hub
[    0.384407] usbcore: registered new device driver usb
[    0.385093] pps_core: LinuxPPS API ver. 1 registered
[    0.385399] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.386402] PTP clock support registered
[    0.386956] Bluetooth: Core ver 2.22
[    0.387410] NET: Registered PF_BLUETOOTH protocol family
[    0.388183] Bluetooth: HCI device and connection manager initialized
[    0.388405] Bluetooth: HCI socket layer initialized
[    0.389017] Bluetooth: L2CAP socket layer initialized
[    0.389404] Bluetooth: SCO socket layer initialized
[    0.390080] PCI: Using ACPI for IRQ routing
[    0.443318] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.443401] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.446470] clocksource: Switched to clocksource kvm-clock
[    0.456016] pnp: PnP ACPI init
[    0.456665] system 00:07: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.457891] pnp: PnP ACPI: found 8 devices
[    0.464591] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.466857] NET: Registered PF_INET protocol family
[    0.467677] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.468972] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.470168] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.471168] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.472167] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.473115] TCP: Hash tables configured (established 4096 bind 4096)
[    0.473986] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.474853] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.475796] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.476823] RPC: Registered named UNIX socket transport module.
[    0.477842] RPC: Registered udp transport module.
[    0.478589] RPC: Registered tcp transport module.
[    0.479195] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.480118] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.480961] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.481809] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.482719] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.483621] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.484506] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.485691] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.487025] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.488344] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.489630] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.490834] PCI: CLS 0 bytes, default 64
[    0.491515] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.492705] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns
[    0.557463] Initialise system trusted keyrings
[    0.558344] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.561479] NFS: Registering the id_resolver key type
[    0.562210] Key type id_resolver registered
[    0.562760] Key type id_legacy registered
[    0.563651] Key type cifs.idmap registered
[    0.573195] xor: automatically using best checksumming function   avx       
[    0.574186] Key type asymmetric registered
[    0.574766] Asymmetric key parser 'x509' registered
[    0.575452] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.576449] io scheduler mq-deadline registered
[    0.577062] io scheduler kyber registered
[    0.577892] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.579103] ACPI: button: Power Button [PWRF]
[    0.580292] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.582125] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.583777] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.585565] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.587180] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.588404] 00:03: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
[    0.589644] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.591793] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.593553] Linux agpgart interface v0.103
[    0.594819] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.595587] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.603891] Console: switching to colour dummy device 80x25
[    0.604829] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.606180] [drm] number of scanouts: 1
[    0.606742] [drm] number of cap sets: 0
[    0.607590] [drm] Initialized virtio_gpu 0.1.0 0 for virtio2 on minor 0
[    0.610591] virtio_gpu virtio2: [drm] drm_plane_enable_fb_damage_clips() not called
[    0.612363] Console: switching to colour frame buffer device 128x48
[    0.633958] virtio_gpu virtio2: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.636616] brd: module loaded
[    0.638253] loop: module loaded
[    0.639873] virtio_blk virtio3: [vda] 1249242 512-byte logical blocks (640 MB/610 MiB)
[    0.642786] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.643927] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.645581] scsi host0: ahci
[    0.646262] scsi host1: ahci
[    0.646945] scsi host2: ahci
[    0.647603] scsi host3: ahci
[    0.648250] scsi host4: ahci
[    0.649057] scsi host5: ahci
[    0.649573] ata1: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4100 irq 32
[    0.650516] ata2: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4180 irq 32
[    0.651477] ata3: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4200 irq 32
[    0.652441] ata4: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4280 irq 32
[    0.653463] ata5: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4300 irq 32
[    0.654413] ata6: SATA max UDMA/133 abar m4096@0xfebd4000 port 0xfebd4380 irq 32
[    0.656672] e100: Intel(R) PRO/100 Network Driver
[    0.657382] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.658113] e1000: Intel(R) PRO/1000 Network Driver
[    0.658768] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.659510] e1000e: Intel(R) PRO/1000 Network Driver
[    0.660140] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.660929] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.661650] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.662377] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.663201] ehci-pci: EHCI PCI platform driver
[    0.664429] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.665127] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.666270] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd3000
[    0.673872] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.675273] hub 1-0:1.0: USB hub found
[    0.675792] hub 1-0:1.0: 6 ports detected
[    0.676573] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.677414] ohci-pci: OHCI PCI platform driver
[    0.678025] uhci_hcd: USB Universal Host Controller Interface driver
[    0.679446] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.680195] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.681285] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c100
[    0.682213] hub 2-0:1.0: USB hub found
[    0.682759] hub 2-0:1.0: 2 ports detected
[    0.684052] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.684923] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.686131] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000c120
[    0.687095] hub 3-0:1.0: USB hub found
[    0.687675] hub 3-0:1.0: 2 ports detected
[    0.688793] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.689603] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.690708] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c140
[    0.691778] hub 4-0:1.0: USB hub found
[    0.692364] hub 4-0:1.0: 2 ports detected
[    0.693051] usbcore: registered new interface driver usb-storage
[    0.693934] usbcore: registered new interface driver usbserial_generic
[    0.694854] usbserial: USB Serial support registered for generic
[    0.695690] usbcore: registered new interface driver ftdi_sio
[    0.696598] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.697660] usbcore: registered new interface driver pl2303
[    0.698394] usbserial: USB Serial support registered for pl2303
[    0.699184] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.700898] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.701605] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.702358] mousedev: PS/2 mouse device common for all mice
[    0.703374] rtc_cmos 00:06: RTC can wake from S4
[    0.704579] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    0.706334] rtc_cmos 00:06: registered as rtc0
[    0.707096] rtc_cmos 00:06: setting system clock to 2024-02-21T14:28:00 UTC (1708525680)
[    0.708378] rtc_cmos 00:06: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.709932] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.710947] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.711782] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.713291] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com
[    0.714728] intel_pstate: CPU model not supported
[    0.715470] sdhci: Secure Digital Host Controller Interface driver
[    0.716344] sdhci: Copyright(c) Pierre Ossman
[    0.717013] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.718023] usbcore: registered new interface driver usbhid
[    0.718855] usbhid: USB HID core driver
[    0.719421] u32 classifier
[    0.719800]     input device check on
[    0.720426]     Actions configured
[    0.721022] NET: Registered PF_INET6 protocol family
[    0.722162] Segment Routing with IPv6
[    0.722706] In-situ OAM (IOAM) with IPv6
[    0.723222] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.724128] NET: Registered PF_PACKET protocol family
[    0.724866] Bridge firewalling registered
[    0.725450] Key type dns_resolver registered
[    0.726076] NET: Registered PF_VSOCK protocol family
[    0.727102] IPI shorthand broadcast: enabled
[    0.727748] sched_clock: Marking stable (635243056, 91806119)->(789892843, -62843668)
[    0.728822] Loading compiled-in X.509 certificates
[    0.729677] Key type .fscrypt registered
[    0.730227] Key type fscrypt-provisioning registered
[    0.731160] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[    0.732518] Key type encrypted registered
[    0.733260] printk: console [netcon0] enabled
[    0.733891] netconsole: network logging started
[    0.913859] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.966385] ata6: SATA link down (SStatus 0 SControl 300)
[    0.967298] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.968332] ata5: SATA link down (SStatus 0 SControl 300)
[    0.969216] ata1: SATA link down (SStatus 0 SControl 300)
[    0.970098] ata2: SATA link down (SStatus 0 SControl 300)
[    0.970899] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.971742] ata3.00: applying bridge limits
[    0.972445] ata4: SATA link down (SStatus 0 SControl 300)
[    0.973322] ata3.00: configured for UDMA/100
[    0.980338] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.998130] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.999040] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.050120] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4
[    1.051822] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
[    1.337086] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[    1.350856] IP-Config: Complete:
[    1.351346]      device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1
[    1.352670]      host=192.168.7.2, domain=, nis-domain=(none)
[    1.353428]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    1.353430]      nameserver0=8.8.8.8
[    1.355212] md: Waiting for all devices to be available before autodetect
[    1.356128] md: If you don't use raid, use raid=noautodetect
[    1.356917] md: Autodetecting RAID arrays.
[    1.357456] md: autorun ...
[    1.357829] md: ... autorun DONE.
[    1.359634] EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
[    1.360977] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    1.361952] devtmpfs: mounted
[    1.363405] Freeing unused kernel image (initmem) memory: 1884K
[    1.374843] Write protecting the kernel read-only data: 22528k
[    1.376965] Freeing unused kernel image (text/rodata gap) memory: 2036K
[    1.378064] Freeing unused kernel image (rodata/data gap) memory: 472K
[    1.379001] Run /sbin/init as init process
INIT: version 3.01 booting
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    1.434384] udevd[166]: starting version 3.2.10
[    1.441067] udevd[167]: starting eudev-3.2.10
[    1.599409] EXT4-fs (vda): re-mounted. Opts: (null). Quota mode: disabled.
[    1.695880] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
Starting Connection Manager
Starting Xserver
Starting Dropbear SSH server: 
Generating 2048 bit rsa key, this may take a while...

X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
Current Operating System: Linux qemux86-64 5.15.148-yocto-standard #1 SMP PREEMPT Wed Feb 7 01:17:06 UTC 2024 x86_64
Kernel command line: root=/dev/vda rw  ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1  printk.time=1
 
Current version of pixman: 0.40.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 21 14:28:01 2024
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Could not resolve keysym XF86EmojiPicker
Errors from xkbcomp are not fatal to the X server
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDGdF9/Rg66+HNRSSGdpH56Tdb7Z7HX/saZVCzLdl91mQkXeNgQBNq21as0bPzrwjyA11LLZ7hwX/ZzZTu4kEk/Zd4XKM4QQNOeh0TpkGEttOsbNIF32tYoZ7/zY798dWXb4XrUrSlLW2NVVa1jui9QUk5aIISn92Tost+kXGNJ9GbHl07MjJuq53n0JcmywC85BDagmkzFuQDBn17OtlmVZyzCd4G9k2qBBtIzk0SdE7FhZUEa84BsKtF3PxaWgOhKtD+Vgsi90HnA8IhkKHPoQwTXo5OI3cJRJ4sDfpWogh+jJnVgpr8Cg4lwqsYgUQA4G/tun/OYkOoHEV8ovpFl root@qemux86-64
Fingerprint: sha1!! 98:ee:80:66:99:a4:fc:fd:be:65:22:9a:ef:24:0e:40:41:32:31:9a
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: D-BUS per-session daemon address is: unix:path=/tmp/dbus-uMGdUGlwzV,guid=7a204e960dbb0657aea3d5c165d60871
[    2.121059] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.121837] Bluetooth: BNEP filters: protocol multicast
done
[    2.122901] Bluetooth: BNEP socket layer initialized
Using calibration data stored in /etc/pointercal.xinput
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
   ...done.
Using calibration data stored in /etc/pointercal.xinput
Starting Telephony daemon
matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts

matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates

matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop

libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
libGL error: failed to create dri screen
libGL error: failed to load driver: virtio_gpu
[settings daemon] Forking. run with -n to prevent fork

Poky (Yocto Project Reference Distro) 4.0.16 qemux86-64 /dev/ttyS0

qemux86-64 login: dbus-daemon[640]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=650 comm="matchbox-panel --start-applets showdesktop,windows")
dbus-daemon[640]: Successfully activated service 'org.a11y.atspi.Registry'
SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry

(connman-applet:608): Gdk-[1;35mCRITICAL[0m **: [34m14:28:01.277[0m: gdk_window_thaw_toplevel_updates: assertion 'window->update_and_descendants_freeze_count > 0' failed
