[ 0.000000] Linux version 6.6.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Wed Feb 21 00:33:56 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40736 r8192 d20704 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238392K/262140K available (14201K kernel code, 1472K rwdata, 3624K rodata, 404K init, 402K bss, 23748K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 319.99 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945936709 ns [ 0.000534] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13422400508ns [ 0.032171] Console: colour dummy device 80x25 [ 0.034854] printk: console [tty0] enabled [ 0.038889] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.17-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Wed Feb 21 00:33:56 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40736 r8192 d20704 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 238392K/262140K available (14201K kernel code, 1472K rwdata, 3624K rodata, 404K init, 402K bss, 23748K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 319.99 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945936709 ns [ 0.000534] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13422400508ns [ 0.032171] Console: colour dummy device 80x25 [ 0.034854] printk: console [tty0] enabled [ 0.038889] printk: bootconsole [uart8250] disabled [ 0.045423] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792) [ 0.148309] pid_max: default: 32768 minimum: 301 [ 0.151794] LSM: initializing lsm=capability,landlock,integrity [ 0.153298] landlock: Up and running. [ 0.160338] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.160826] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.256887] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.259274] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.260914] Performance counters: No available PMU. [ 0.265144] rcu: Hierarchical SRCU implementation. [ 0.265429] rcu: Max phase no-delay instances is 1000. [ 0.287252] smp: Bringing up secondary CPUs ... [ 0.288240] smp: Brought up 1 node, 1 CPU [ 0.322646] devtmpfs: initialized [ 0.343892] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.350848] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.375874] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.843813] raid6: int32x8 gen() 114 MB/s [ 1.190654] raid6: int32x4 gen() 254 MB/s [ 1.553834] raid6: int32x2 gen() 334 MB/s [ 1.906498] raid6: int32x1 gen() 252 MB/s [ 1.906936] raid6: using algorithm int32x2 gen() 334 MB/s [ 2.265273] raid6: .... xor() 127 MB/s, rmw enabled [ 2.265833] raid6: using intx1 recovery algorithm [ 2.287566] SCSI subsystem initialized [ 2.289612] usbcore: registered new interface driver usbfs [ 2.290461] usbcore: registered new interface driver hub [ 2.291050] usbcore: registered new device driver usb [ 2.292065] pps_core: LinuxPPS API ver. 1 registered [ 2.292225] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.292655] PTP clock support registered [ 2.379988] PCI host bridge to bus 0000:00 [ 2.380978] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.382202] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.382573] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.386117] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 2.388250] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 2.388652] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.389018] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.389231] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.389457] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.389682] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.412703] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.415214] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.416023] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.416394] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.416584] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.416831] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.417015] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.429454] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.430011] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.431905] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.433321] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.433694] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.435312] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.435580] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.435935] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.436193] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.437614] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.437951] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.438310] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.453583] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.455456] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.455908] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.456212] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.457511] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.457790] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.458086] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.460119] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.474197] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.475235] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.475568] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.475816] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.476246] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.476503] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.476807] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.477091] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.477307] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.477473] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.477662] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.477849] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.487726] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 2.488222] pci 0000:00:12.0: vgaarb: bridge control possible [ 2.488489] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.488834] vgaarb: loaded [ 2.514395] clocksource: Switched to clocksource MIPS [ 2.976287] NET: Registered PF_INET protocol family [ 2.980124] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.002640] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 3.003300] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.004117] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.004768] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 3.005247] TCP: Hash tables configured (established 2048 bind 2048) [ 3.008700] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.009660] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 3.015159] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.024759] RPC: Registered named UNIX socket transport module. [ 3.025248] RPC: Registered udp transport module. [ 3.025393] RPC: Registered tcp transport module. [ 3.025514] RPC: Registered tcp-with-tls transport module. [ 3.025643] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.027912] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 3.030475] PCI: CLS 0 bytes, default 16 [ 3.054882] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.072652] NFS: Registering the id_resolver key type [ 3.077904] Key type id_resolver registered [ 3.078280] Key type id_legacy registered [ 3.092674] Key type cifs.idmap registered [ 4.070891] xor: measuring software checksum speed [ 4.096336] 8regs : 410 MB/sec [ 4.120719] 8regs_prefetch : 443 MB/sec [ 4.141518] 32regs : 525 MB/sec [ 4.163761] 32regs_prefetch : 476 MB/sec [ 4.164157] xor: using function: 32regs (525 MB/sec) [ 4.165592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 4.166222] io scheduler mq-deadline registered [ 4.166462] io scheduler kyber registered [ 4.186601] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 4.203954] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 4.208202] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 4.215418] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 4.243160] printk: console [ttyS0] disabled [ 4.285959] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 4.286491] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 4.764688] printk: console [ttyS0] enabled [ 4.945899] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 4.957382] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 4.959220] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 4.980407] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 4.992171] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 4.995665] [drm] Found bochs VGA, ID 0xb0c5. [ 4.996829] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 5.015037] [drm] Found EDID data blob. [ 5.036180] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 5.250132] Console: switching to colour frame buffer device 160x50 [ 5.310194] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 5.481042] brd: module loaded [ 5.485584] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 5.511143] virtio_blk virtio2: [vda] 1134030 512-byte logical blocks (581 MB/554 MiB) [ 5.593937] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 5.605697] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 5.617980] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 5.647350] hub 1-0:1.0: USB hub found [ 5.650267] hub 1-0:1.0: 2 ports detected [ 5.669553] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.684874] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.696989] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.711673] usbcore: registered new interface driver usbhid [ 5.717740] usbhid: USB HID core driver [ 5.727012] u32 classifier [ 5.728211] input device check on [ 5.729262] Actions configured [ 5.733223] NET: Registered PF_INET6 protocol family [ 5.758046] Segment Routing with IPv6 [ 5.766012] In-situ OAM (IOAM) with IPv6 [ 5.770857] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 5.801074] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 5.832147] NET: Registered PF_PACKET protocol family [ 5.854894] Bridge firewalling registered [ 5.866869] Key type dns_resolver registered [ 5.926340] NET: Registered PF_VSOCK protocol family [ 5.984964] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 6.091240] registered taskstats version 1 [ 6.194407] Key type .fscrypt registered [ 6.243191] Key type fscrypt-provisioning registered [ 6.314389] Btrfs loaded, zoned=no, fsverity=no [ 6.427711] Key type encrypted registered [ 6.510030] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 6.516584] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 6.578280] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 6.609912] printk: console [netcon0] enabled [ 6.633069] netconsole: network logging started [ 6.775982] IP-Config: Complete: [ 6.824196] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 6.893912] host=192.168.7.4, domain=, nis-domain=(none) [ 6.943310] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 6.943883] nameserver0=8.8.8.8 [ 7.038900] clk: Disabling unused clocks [ 7.087904] md: Waiting for all devices to be available before autodetect [ 7.131373] md: If you don't use raid, use raid=noautodetect [ 7.173044] md: Autodetecting RAID arrays. [ 7.218031] md: autorun ... [ 7.276193] md: ... autorun DONE. [ 7.454218] EXT4-fs (vda): mounted filesystem 14f07287-5b5c-44d3-af60-c7fea39c12cb r/w with ordered data mode. Quota mode: disabled. [ 7.508685] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 7.561493] devtmpfs: mounted [ 7.752997] Freeing unused kernel image (initmem) memory: 404K [ 7.797526] This architecture does not have kernel memory protection. [ 7.839056] Run /sbin/init as init process [ 7.955634] process '/sbin/init.sysvinit' started with executable stack [ 17.146314] udevd[92]: starting version 3.2.14 [ 17.510789] udevd[93]: starting eudev-3.2.14 [ 38.776544] EXT4-fs (vda): re-mounted 14f07287-5b5c-44d3-af60-c7fea39c12cb r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.17-yocto-standard #1 SMP PREEMPT Wed Feb 21 00:33:56 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 23 16:05:17 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-e6161bbc6e7c8c32557148e4e3b571ec4ebecb36 qemumips /dev/ttyS0 qemumips login: