[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.18-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Mon Feb 26 20:12:37 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10643K kernel code, 1425K rwdata, 2836K rodata, 464K init, 339K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42214 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000477] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001833] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.014325] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.037769] Console: colour dummy device 80x30 [ 0.042274] Calibrating delay loop... 422.70 BogoMIPS (lpj=2113536) [ 0.157937] CPU: Testing write buffer coherency: ok [ 0.161675] pid_max: default: 32768 minimum: 301 [ 0.165216] LSM: initializing lsm=capability,landlock,integrity [ 0.166768] landlock: Up and running. [ 0.174816] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.175063] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.294468] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.298273] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.299852] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.302550] Setting up static identity map for 0x8400 - 0x8458 [ 0.305901] rcu: Hierarchical SRCU implementation. [ 0.306084] rcu: Max phase no-delay instances is 1000. [ 0.347610] devtmpfs: initialized [ 0.393132] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.396537] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.396847] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.422798] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.434538] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.563608] Serial: AMBA PL011 UART driver [ 0.588177] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.591788] printk: console [ttyAMA0] enabled [ 0.690064] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.698826] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.705843] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.712085] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.729189] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 1.137879] raid6: int32x8 gen() 41 MB/s [ 1.477534] raid6: int32x4 gen() 54 MB/s [ 1.817704] raid6: int32x2 gen() 83 MB/s [ 2.157712] raid6: int32x1 gen() 42 MB/s [ 2.163740] raid6: using algorithm int32x2 gen() 83 MB/s [ 2.527817] raid6: .... xor() 100 MB/s, rmw enabled [ 2.529082] raid6: using intx1 recovery algorithm [ 2.554102] SCSI subsystem initialized [ 2.559239] usbcore: registered new interface driver usbfs [ 2.561157] usbcore: registered new interface driver hub [ 2.562735] usbcore: registered new device driver usb [ 2.585425] pps_core: LinuxPPS API ver. 1 registered [ 2.586468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.609178] PTP clock support registered [ 2.633385] Advanced Linux Sound Architecture Driver Initialized. [ 2.719936] vgaarb: loaded [ 2.749457] clocksource: Switched to clocksource arm,sp804 [ 3.970878] NET: Registered PF_INET protocol family [ 3.976501] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 4.004630] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 4.006978] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 4.009064] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 4.010641] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 4.012146] TCP: Hash tables configured (established 2048 bind 2048) [ 4.016853] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 4.019544] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 4.026089] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 4.039968] RPC: Registered named UNIX socket transport module. [ 4.041292] RPC: Registered udp transport module. [ 4.042095] RPC: Registered tcp transport module. [ 4.042853] RPC: Registered tcp-with-tls transport module. [ 4.043699] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.045062] PCI: CLS 0 bytes, default 32 [ 4.059925] NetWinder Floating Point Emulator V0.97 (double precision) [ 4.095106] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 4.113418] NFS: Registering the id_resolver key type [ 4.118435] Key type id_resolver registered [ 4.119450] Key type id_legacy registered [ 4.134017] Key type cifs.idmap registered [ 4.739757] xor: measuring software checksum speed [ 4.766311] arm4regs : 416 MB/sec [ 4.789498] 8regs : 470 MB/sec [ 4.812720] 32regs : 474 MB/sec [ 4.813879] xor: using function: 32regs (474 MB/sec) [ 4.816559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 4.819494] io scheduler mq-deadline registered [ 4.820567] io scheduler kyber registered [ 4.822818] io scheduler bfq registered [ 4.861607] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 4.868668] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 4.874143] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 4.879717] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 4.883795] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 4.886681] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 4.890151] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 4.891693] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 4.896283] versatile-pci 10001000.pci: PCI core found (slot 11) [ 4.902784] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 4.904544] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.906213] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.907991] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 4.909188] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 4.916234] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 4.919678] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 4.920979] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 4.921985] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 4.933443] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 4.935066] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 4.936280] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.938495] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 4.942378] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 4.943448] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 4.944317] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.947994] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 4.949196] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.963601] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 4.964830] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.968653] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 4.969839] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 4.970784] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.976219] PCI: bus0: Fast back to back transfers disabled [ 4.981086] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 4.982879] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 4.984443] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 4.985620] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 4.986645] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 4.988363] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 4.989458] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 4.990431] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 4.991473] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.992323] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 4.993154] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 4.993982] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 4.999843] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 5.006625] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.010518] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.018238] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 5.025787] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 5.031322] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 5.036882] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 5.045587] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 5.091072] random: crng init done [ 5.099331] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 5.103197] [drm] features: -virgl +edid -resource_blob -host_visible [ 5.103338] [drm] features: -context_init [ 5.105809] [drm] number of scanouts: 1 [ 5.106482] [drm] number of cap sets: 0 [ 5.144051] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 5.434071] Console: switching to colour frame buffer device 160x50 [ 5.514732] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 5.560436] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 5.565978] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.722731] brd: module loaded [ 5.724943] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 5.736394] virtio_blk virtio3: [vda] 950128 512-byte logical blocks (486 MB/464 MiB) [ 5.785721] physmap-flash 34000000.flash: versatile/realview flash protection [ 5.820010] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 5.826193] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 5.830212] Intel/Sharp Extended Query Table at 0x0031 [ 5.832720] Using buffer write method [ 5.932527] smc91x: not found (-19). [ 5.942754] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 5.952226] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 6.029029] rtc-ds1307 0-0068: registered as rtc0 [ 6.046723] rtc-ds1307 0-0068: setting system clock to 2024-02-28T03:33:14 UTC (1709091194) [ 6.079738] rtc-pl031 101e8000.rtc: registered as rtc1 [ 6.089988] i2c_dev: i2c /dev entries driver [ 6.105368] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 6.115340] versatile reboot driver registered [ 6.150991] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 6.212750] leds-syscon 10000008.0.led: registered LED (null) [ 6.232654] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 6.238660] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 6.260296] leds-syscon 10000008.1.led: registered LED (null) [ 6.283518] leds-syscon 10000008.2.led: registered LED (null) [ 6.309277] leds-syscon 10000008.3.led: registered LED (null) [ 6.329377] leds-syscon 10000008.4.led: registered LED (null) [ 6.340531] leds-syscon 10000008.5.led: registered LED (null) [ 6.345192] leds-syscon 10000008.6.led: registered LED (null) [ 6.349050] leds-syscon 10000008.7.led: registered LED (null) [ 6.362771] ledtrig-cpu: registered to indicate activity on CPUs [ 6.399897] usbcore: registered new interface driver usbhid [ 6.400839] usbhid: USB HID core driver [ 6.459151] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 6.461952] aaci-pl041 10004000.aaci: FIFO 512 entries [ 6.465765] u32 classifier [ 6.471693] input device check on [ 6.473318] Actions configured [ 6.478415] NET: Registered PF_INET6 protocol family [ 6.514937] Segment Routing with IPv6 [ 6.521779] In-situ OAM (IOAM) with IPv6 [ 6.530895] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.543001] NET: Registered PF_PACKET protocol family [ 6.548490] Bridge firewalling registered [ 6.553261] Key type dns_resolver registered [ 6.564296] NET: Registered PF_VSOCK protocol family [ 6.721780] registered taskstats version 1 [ 6.826494] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 6.896654] Key type .fscrypt registered [ 6.904730] Key type fscrypt-provisioning registered [ 6.932422] Btrfs loaded, zoned=no, fsverity=no [ 6.963786] Key type encrypted registered [ 6.985694] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.998862] clcd-pl11x: probe of 10120000.display failed with error -2 [ 7.006431] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 7.024083] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 7.035411] clcd-pl11x: probe of 10120000.display failed with error -2 [ 7.041990] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 7.049367] printk: console [netcon0] enabled [ 7.050534] netconsole: network logging started [ 7.158619] IP-Config: Complete: [ 7.159456] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 7.160931] host=192.168.7.4, domain=, nis-domain=(none) [ 7.161596] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 7.161774] nameserver0=8.8.8.8 [ 7.180230] clk: Disabling unused clocks [ 7.185378] ALSA device list: [ 7.186162] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 7.208471] md: Waiting for all devices to be available before autodetect [ 7.210324] md: If you don't use raid, use raid=noautodetect [ 7.211784] md: Autodetecting RAID arrays. [ 7.214718] md: autorun ... [ 7.215321] md: ... autorun DONE. [ 7.595095] EXT4-fs (vda): mounted filesystem a921c594-3910-4846-bad9-9f806abef0b6 r/w with ordered data mode. Quota mode: disabled. [ 7.612832] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 7.623334] devtmpfs: mounted [ 7.759196] Freeing unused kernel image (initmem) memory: 464K [ 7.769573] Kernel memory protection not selected by kernel config. [ 7.781230] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 16.529478] udevd[97]: starting version 3.2.14 [ 17.069172] udevd[98]: starting eudev-3.2.14 [ 17.781237] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 17.782890] clcd-pl11x: probe of 10120000.display failed with error -2 [ 17.786092] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 17.800652] amba 10100000.smc: deferred probe pending [ 17.801766] amba 10110000.mpmc: deferred probe pending [ 17.802613] amba 101e0000.sctl: deferred probe pending [ 17.803413] amba 101e1000.watchdog: deferred probe pending [ 17.804268] amba 101f0000.sci: deferred probe pending [ 17.805066] amba 101f4000.spi: deferred probe pending [ 17.805852] amba 1000a000.sci: deferred probe pending [ 17.806627] amba 10120000.display: deferred probe pending [ 60.371922] EXT4-fs (vda): re-mounted a921c594-3910-4846-bad9-9f806abef0b6 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.18-yocto-standard #1 PREEMPT Mon Feb 26 20:12:37 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 28 03:34:37 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-930ae8ba1314e6c991628176a5d733102c119fee qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-oMc80OpFzp,guid=dfd05cb48de8377448a281c665dea9ef Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused Matchbox: error parsing /usr/share/themes/Sato/matchbox/theme.xml Error loading resource from dbus-daemon[534]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=516 comm="connman-applet") dbus-daemon[534]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry