[ 0.000000] Linux version 6.6.18-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT_DYNAMIC Mon Feb 26 20:12:37 UTC 2024 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 399770370 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000003] tsc: Detected 2599.988 MHz processor [ 0.000954] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.000972] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.000974] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.004250] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.004354] ACPI: Early table checksum verification disabled [ 0.004356] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS ) [ 0.004362] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004366] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004369] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004372] ACPI: FACS 0x000000001FFE0000 000040 [ 0.004374] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004376] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004378] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004380] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.004382] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a] [ 0.004383] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216] [ 0.004384] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.004384] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a] [ 0.004385] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2] [ 0.004385] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e] [ 0.004386] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436] [ 0.004416] Zone ranges: [ 0.004417] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.004418] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.004420] Normal empty [ 0.004420] Movable zone start for each node [ 0.004421] Early memory node ranges [ 0.004421] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.004422] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.004423] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.004804] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.004818] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.006427] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.006663] ACPI: PM-Timer IO Port: 0x608 [ 0.006669] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.006687] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.006689] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.006690] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.006691] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.006692] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.006693] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.006696] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.006696] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.006698] TSC deadline timer available [ 0.006699] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.006707] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.006717] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.006718] Booting paravirtualized kernel on KVM [ 0.006719] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.006722] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.007268] percpu: Embedded 56 pages/cpu s190568 r8192 d30616 u524288 [ 0.007288] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.007347] random: crng init done [ 0.007402] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.007434] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.007479] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.007980] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.009011] Memory: 477740K/523736K available (18432K kernel code, 2316K rwdata, 5240K rodata, 3380K init, 2320K bss, 45736K reserved, 0K cma-reserved) [ 0.009043] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.009049] Kernel/User page tables isolation: enabled [ 0.009064] ftrace: allocating 50989 entries in 200 pages [ 0.016469] ftrace: allocated 200 pages with 3 groups [ 0.016499] Dynamic Preempt: full [ 0.016907] rcu: Preemptible hierarchical RCU implementation. [ 0.016907] rcu: RCU event tracing is enabled. [ 0.016908] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.016909] All grace periods are expedited (rcu_expedited). [ 0.016909] Trampoline variant of Tasks RCU enabled. [ 0.016910] Rude variant of Tasks RCU enabled. [ 0.016910] Tracing variant of Tasks RCU enabled. [ 0.016911] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.016911] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.019833] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.019998] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.020046] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.022693] Console: colour VGA+ 80x25 [ 0.022718] printk: console [ttyS0] enabled [ 0.089395] ACPI: Core revision 20230628 [ 0.089830] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.090746] APIC: Switch to symmetric I/O mode setup [ 0.091323] x2apic enabled [ 0.091734] APIC: Switched APIC routing to: physical x2apic [ 0.092822] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.093452] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a30e14db, max_idle_ns: 440795278188 ns [ 0.094463] Calibrating delay loop (skipped) preset value.. 5199.97 BogoMIPS (lpj=2599988) [ 0.095535] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.096465] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.097027] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.097466] Spectre V2 : Mitigation: Retpolines [ 0.097880] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.098465] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.099465] Speculative Store Bypass: Vulnerable [ 0.099915] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.100465] MMIO Stale Data: Unknown: No mitigations [ 0.100943] SRBDS: Unknown: Dependent on hypervisor status [ 0.101471] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.102465] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.103071] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.103465] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.104465] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.120857] Freeing SMP alternatives memory: 52K [ 0.121303] pid_max: default: 32768 minimum: 301 [ 0.121478] LSM: initializing lsm=capability,landlock,integrity [ 0.122042] landlock: Up and running. [ 0.122483] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.123171] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.123617] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.124483] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.125239] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.125479] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.126230] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.126477] signal: max sigframe size: 1776 [ 0.126898] rcu: Hierarchical SRCU implementation. [ 0.127384] rcu: Max phase no-delay instances is 400. [ 0.127620] smp: Bringing up secondary CPUs ... [ 0.128138] smpboot: x86: Booting SMP configuration: [ 0.128474] .... node #0, CPUs: #1 #2 #3 [ 0.128799] smp: Brought up 1 node, 4 CPUs [ 0.129879] smpboot: Max logical packages: 1 [ 0.130307] smpboot: Total of 4 processors activated (20799.90 BogoMIPS) [ 0.130721] devtmpfs: initialized [ 0.130978] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.131469] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.132483] pinctrl core: initialized pinctrl subsystem [ 0.133697] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.134515] thermal_sys: Registered thermal governor 'step_wise' [ 0.134517] thermal_sys: Registered thermal governor 'user_space' [ 0.135146] cpuidle: using governor menu [ 0.135999] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.136467] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.137194] PCI: Using configuration type 1 for base access [ 0.137590] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.154606] raid6: sse2x4 gen() 16939 MB/s [ 0.172268] raid6: sse2x2 gen() 16539 MB/s [ 0.188890] raid6: sse2x1 gen() 13297 MB/s [ 0.189398] raid6: using algorithm sse2x4 gen() 16939 MB/s [ 0.207463] raid6: .... xor() 8551 MB/s, rmw enabled [ 0.207466] raid6: using ssse3x2 recovery algorithm [ 0.208050] ACPI: Added _OSI(Module Device) [ 0.208466] ACPI: Added _OSI(Processor Device) [ 0.208928] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.209413] ACPI: Added _OSI(Processor Aggregator Device) [ 0.210150] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.212503] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.213225] ACPI: Interpreter enabled [ 0.213475] ACPI: PM: (supports S0 S3 S5) [ 0.213874] ACPI: Using IOAPIC for interrupt routing [ 0.214431] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.214466] PCI: Using E820 reservations for host bridge windows [ 0.215165] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.216731] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.217467] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.218428] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.218510] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.219250] PCI host bridge to bus 0000:00 [ 0.219468] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.220236] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.220466] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.221241] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.221466] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.222248] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.222466] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.223139] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.223775] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.225126] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.226466] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.230111] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.231466] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.232520] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.234123] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.235866] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.238466] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.240203] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.242473] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.247472] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.249472] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.251948] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.252500] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.253804] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.256942] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.259470] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.263468] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.266037] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.268215] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.269365] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.271467] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.274039] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.275834] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.277014] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.277810] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.280212] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.280692] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.281615] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.284388] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.284999] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.286251] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.287945] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.290639] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.291410] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.291528] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.292282] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.292527] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.293276] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.293517] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.294247] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.294488] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.295207] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.295474] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.296223] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.296484] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.297171] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.297475] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.298227] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.298762] iommu: Default domain type: Translated [ 0.299302] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.299537] SCSI subsystem initialized [ 0.299959] ACPI: bus type USB registered [ 0.300488] usbcore: registered new interface driver usbfs [ 0.301127] usbcore: registered new interface driver hub [ 0.301475] usbcore: registered new device driver usb [ 0.302062] pps_core: LinuxPPS API ver. 1 registered [ 0.302466] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.303470] PTP clock support registered [ 0.303965] Bluetooth: Core ver 2.22 [ 0.304473] NET: Registered PF_BLUETOOTH protocol family [ 0.305098] Bluetooth: HCI device and connection manager initialized [ 0.305468] Bluetooth: HCI socket layer initialized [ 0.305993] Bluetooth: L2CAP socket layer initialized [ 0.306470] Bluetooth: SCO socket layer initialized [ 0.307063] PCI: Using ACPI for IRQ routing [ 0.336154] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.336154] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.336463] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.336467] vgaarb: loaded [ 0.336839] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.337418] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.340544] clocksource: Switched to clocksource kvm-clock [ 0.342166] pnp: PnP ACPI init [ 0.342612] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.343454] pnp: PnP ACPI: found 5 devices [ 0.350278] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.351265] NET: Registered PF_INET protocol family [ 0.351860] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.352827] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.353684] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.355220] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.356054] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.356845] TCP: Hash tables configured (established 4096 bind 4096) [ 0.357521] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.358155] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.358885] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.359663] RPC: Registered named UNIX socket transport module. [ 0.360268] RPC: Registered udp transport module. [ 0.360726] RPC: Registered tcp transport module. [ 0.361163] RPC: Registered tcp-with-tls transport module. [ 0.361669] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.362270] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.362841] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.363428] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.364127] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.364811] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.365440] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.366284] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.367314] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.368305] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.369400] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.370422] PCI: CLS 0 bytes, default 64 [ 0.371023] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.371878] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a30e14db, max_idle_ns: 440795278188 ns [ 0.373675] Initialise system trusted keyrings [ 0.374274] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.375157] NFS: Registering the id_resolver key type [ 0.375727] Key type id_resolver registered [ 0.376189] Key type id_legacy registered [ 0.377445] Key type cifs.idmap registered [ 0.389799] xor: automatically using best checksumming function avx [ 0.390613] Key type asymmetric registered [ 0.391043] Asymmetric key parser 'x509' registered [ 0.391588] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.392374] io scheduler mq-deadline registered [ 0.392864] io scheduler kyber registered [ 0.393261] io scheduler bfq registered [ 0.393869] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.395676] ACPI: button: Power Button [PWRF] [ 0.396741] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.398098] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.399288] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.402569] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.404527] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.405772] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.407307] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.412979] Linux agpgart interface v0.103 [ 0.413544] ACPI: bus type drm_connector registered [ 0.414111] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.415577] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.417433] Console: switching to colour dummy device 80x25 [ 0.418482] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.418484] [drm] features: -context_init [ 0.419859] [drm] number of scanouts: 1 [ 0.420303] [drm] number of cap sets: 0 [ 0.420991] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 0.424397] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.426228] Console: switching to colour frame buffer device 160x50 [ 0.451171] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.453974] brd: module loaded [ 0.455157] loop: module loaded [ 0.455603] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.457074] virtio_blk virtio3: [vda] 798744 512-byte logical blocks (409 MB/390 MiB) [ 0.478258] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.479359] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.480927] scsi host0: ahci [ 0.481568] scsi host1: ahci [ 0.482175] scsi host2: ahci [ 0.482765] scsi host3: ahci [ 0.483332] scsi host4: ahci [ 0.483951] scsi host5: ahci [ 0.484423] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.485378] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.486321] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.487269] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.488286] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.489221] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.500250] e100: Intel(R) PRO/100 Network Driver [ 0.501016] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.501726] e1000: Intel(R) PRO/1000 Network Driver [ 0.502343] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.503077] e1000e: Intel(R) PRO/1000 Network Driver [ 0.503711] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.504486] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.505165] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.506587] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.507571] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.508617] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.509642] hub 1-0:1.0: USB hub found [ 0.510189] hub 1-0:1.0: 2 ports detected [ 0.511261] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.511924] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.512827] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.519575] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.520664] hub 2-0:1.0: USB hub found [ 0.521129] hub 2-0:1.0: 6 ports detected [ 0.543565] hub 1-0:1.0: USB hub found [ 0.543996] hub 1-0:1.0: 2 ports detected [ 0.544567] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.546039] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.548227] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.550157] hub 3-0:1.0: USB hub found [ 0.550772] hub 3-0:1.0: 2 ports detected [ 0.551844] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.552448] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.553235] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.554180] hub 4-0:1.0: USB hub found [ 0.554674] hub 4-0:1.0: 2 ports detected [ 0.555444] usbcore: registered new interface driver usb-storage [ 0.556286] usbcore: registered new interface driver usbserial_generic [ 0.557170] usbserial: USB Serial support registered for generic [ 0.558031] usbcore: registered new interface driver ftdi_sio [ 0.558788] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.559766] usbcore: registered new interface driver pl2303 [ 0.560549] usbserial: USB Serial support registered for pl2303 [ 0.561351] i8042: PNP: No PS/2 controller found. [ 0.562037] mousedev: PS/2 mouse device common for all mice [ 0.562908] rtc_cmos 00:03: RTC can wake from S4 [ 0.563950] rtc_cmos 00:03: registered as rtc0 [ 0.564630] rtc_cmos 00:03: setting system clock to 2024-02-28T14:54:34 UTC (1709132074) [ 0.565714] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.566968] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.567058] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.567824] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.569103] intel_pstate: CPU model not supported [ 0.569602] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.571275] sdhci: Secure Digital Host Controller Interface driver [ 0.572141] sdhci: Copyright(c) Pierre Ossman [ 0.572808] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.573645] usbcore: registered new interface driver usbhid [ 0.574378] usbhid: USB HID core driver [ 0.574907] u32 classifier [ 0.575257] input device check on [ 0.575731] Actions configured [ 0.576277] NET: Registered PF_INET6 protocol family [ 0.577358] Segment Routing with IPv6 [ 0.577870] In-situ OAM (IOAM) with IPv6 [ 0.578433] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.579328] NET: Registered PF_PACKET protocol family [ 0.580037] Bridge firewalling registered [ 0.580633] Key type dns_resolver registered [ 0.581286] NET: Registered PF_VSOCK protocol family [ 0.582301] IPI shorthand broadcast: enabled [ 0.584542] sched_clock: Marking stable (513002721, 71460967)->(689270658, -104806970) [ 0.585697] registered taskstats version 1 [ 0.586261] Loading compiled-in X.509 certificates [ 0.588480] Key type .fscrypt registered [ 0.589015] Key type fscrypt-provisioning registered [ 0.589991] Btrfs loaded, zoned=no, fsverity=no [ 0.591150] Key type encrypted registered [ 0.591771] printk: console [netcon0] enabled [ 0.592376] netconsole: network logging started [ 0.757514] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.811016] ata1: SATA link down (SStatus 0 SControl 300) [ 0.811933] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.812946] ata6: SATA link down (SStatus 0 SControl 300) [ 0.813771] ata2: SATA link down (SStatus 0 SControl 300) [ 0.814415] ata4: SATA link down (SStatus 0 SControl 300) [ 0.815094] ata5: SATA link down (SStatus 0 SControl 300) [ 0.815710] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.816374] ata3.00: applying bridge limits [ 0.817019] ata3.00: configured for UDMA/100 [ 0.817893] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.830917] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.831636] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.853505] IP-Config: Complete: [ 0.853884] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 0.854884] host=192.168.7.4, domain=, nis-domain=(none) [ 0.855450] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 0.855452] nameserver0=8.8.8.8 [ 0.856667] clk: Disabling unused clocks [ 0.857260] md: Waiting for all devices to be available before autodetect [ 0.857861] md: If you don't use raid, use raid=noautodetect [ 0.858314] md: Autodetecting RAID arrays. [ 0.858661] md: autorun ... [ 0.858890] md: ... autorun DONE. [ 0.863104] EXT4-fs (vda): mounted filesystem 3db17c0c-1bb3-4098-95fa-e40a793bf1d7 r/w with ordered data mode. Quota mode: disabled. [ 0.864119] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 0.864742] devtmpfs: mounted [ 0.866112] Freeing unused kernel image (initmem) memory: 3380K [ 0.870499] Write protecting the kernel read-only data: 24576k [ 0.871342] Freeing unused kernel image (rodata/data gap) memory: 904K [ 0.871955] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled [ 0.904557] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 0.905685] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 0.938754] udevd[139]: starting version 3.2.14 [ 0.943736] udevd[140]: starting eudev-3.2.14 [ 1.020534] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.155928] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.208792] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.275624] EXT4-fs (vda): re-mounted 3db17c0c-1bb3-4098-95fa-e40a793bf1d7 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seat.c:39] Created VT-bound seat seat0 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seatd.c:194] seatd started Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... 00:00:00.127  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 344, uid: 1000, gid: 1000) 00:00:00.127  [c/debug/seatd/0.8.0/seatd/seat.c:170] Added client 2 to seat0 00:00:00.127  [c/debug/seatd/0.8.0/seatd/seat.c:480] Opened client 2 on seat0 [ 1.710797] weston[344]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set could not load cursor 'dnd-move' could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' could not load cursor 'dnd-none' Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCmC19QttK2FeeWWbUtLC6f5qsXdGl1DEt7VhixpnvZKWIA/qejUGFcty5o83kjviZZP2m0z3jfJHSyh40EeaivAr+Eg2qhJsmwP5zQnQXVLkv9HiCka05+A3GWkG26//BI0mkZrDQ8m9hTJZyxUjRX0Ct1qIhuU3BaD/4yeBKY+0EyeP0O5LjjpJI+RK3tR+Ce2sTPp74bhkNm27q5IabIDe1EMGyzMR5/o8cHgsVn4wVdV//mYOPhkbB2c/sAIxi0qieuQtNwinN+yZ9tvvtgtecvLoxM5pc1w8AdCBFgSKz/jlKs+gAe4TnjHQf50wAOwvwnm3g8GgtibtBL4Mkd root@qemux86-64 Fingerprint: SHA256:VQoL0r/hNZfKmLVQqJFau6IGceW2NMxEFmiDla4JHCM dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: [ 2.143672] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.144262] Bluetooth: BNEP filters: protocol multicast [ 2.144740] Bluetooth: BNEP socket layer initialized done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-1154d329a8862b21a84bf2c3ce2e1f837e4a9f27 qemux86-64 /dev/ttyS0 qemux86-64 login: 00:01:16.469  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 5946, uid: 0, gid: 0) 00:01:16.470  [c/debug/seatd/0.8.0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client 00:01:16.472  [c/debug/seatd/0.8.0/seatd/client.c:177] Could not add client to target seat: Device or resource busy