[ 0.000000] Linux version 6.6.18-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT_DYNAMIC Mon Feb 26 20:12:37 UTC 2024 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000001] kvm-clock: using sched offset of 465293968 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000005] tsc: Detected 2299.996 MHz processor [ 0.001270] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001293] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001297] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.005786] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.005987] ACPI: Early table checksum verification disabled [ 0.005991] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS ) [ 0.006002] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006008] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006013] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006017] ACPI: FACS 0x000000001FFE0000 000040 [ 0.006019] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006022] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006025] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006028] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.006031] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a] [ 0.006033] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216] [ 0.006034] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.006034] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a] [ 0.006035] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2] [ 0.006036] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e] [ 0.006037] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436] [ 0.006097] Zone ranges: [ 0.006098] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.006100] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.006102] Normal empty [ 0.006103] Movable zone start for each node [ 0.006103] Early memory node ranges [ 0.006104] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.006105] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.006107] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.006491] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006510] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.008208] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.008528] ACPI: PM-Timer IO Port: 0x608 [ 0.008537] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.008564] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.008567] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.008569] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.008571] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.008572] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.008573] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.008577] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.008579] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.008583] TSC deadline timer available [ 0.008584] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.008601] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.008625] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.008626] Booting paravirtualized kernel on KVM [ 0.008628] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.008634] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.009244] percpu: Embedded 56 pages/cpu s190568 r8192 d30616 u524288 [ 0.009273] Kernel command line: root=/dev/vda rw ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.009361] random: crng init done [ 0.009444] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.009486] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.009556] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.010126] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.011788] Memory: 477732K/523736K available (18432K kernel code, 2316K rwdata, 5240K rodata, 3380K init, 2320K bss, 45744K reserved, 0K cma-reserved) [ 0.011832] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.011840] Kernel/User page tables isolation: enabled [ 0.011862] ftrace: allocating 50989 entries in 200 pages [ 0.021910] ftrace: allocated 200 pages with 3 groups [ 0.021987] Dynamic Preempt: full [ 0.022408] rcu: Preemptible hierarchical RCU implementation. [ 0.022409] rcu: RCU event tracing is enabled. [ 0.022410] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.022411] All grace periods are expedited (rcu_expedited). [ 0.022412] Trampoline variant of Tasks RCU enabled. [ 0.022412] Rude variant of Tasks RCU enabled. [ 0.022413] Tracing variant of Tasks RCU enabled. [ 0.022414] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.022415] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.026375] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.026571] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.026682] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.030337] Console: colour VGA+ 80x25 [ 0.030374] printk: console [ttyS0] enabled [ 0.117414] ACPI: Core revision 20230628 [ 0.118021] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.119283] APIC: Switch to symmetric I/O mode setup [ 0.120030] x2apic enabled [ 0.120652] APIC: Switched APIC routing to: physical x2apic [ 0.122063] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.122855] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns [ 0.124173] Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=2299996) [ 0.126227] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.126892] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.127176] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.128177] Spectre V2 : Mitigation: Retpolines [ 0.129175] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.130175] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.131175] Speculative Store Bypass: Vulnerable [ 0.131758] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.132175] MMIO Stale Data: Unknown: No mitigations [ 0.133175] SRBDS: Unknown: Dependent on hypervisor status [ 0.133882] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.134175] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.135175] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.136175] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.137175] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.160115] Freeing SMP alternatives memory: 52K [ 0.160177] pid_max: default: 32768 minimum: 301 [ 0.161202] LSM: initializing lsm=capability,landlock,integrity [ 0.161951] landlock: Up and running. [ 0.162206] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.163176] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.164442] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.165350] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.166196] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.167170] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.167199] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.168192] signal: max sigframe size: 1776 [ 0.168771] rcu: Hierarchical SRCU implementation. [ 0.169176] rcu: Max phase no-delay instances is 400. [ 0.170052] smp: Bringing up secondary CPUs ... [ 0.170281] smpboot: x86: Booting SMP configuration: [ 0.170895] .... node #0, CPUs: #1 #2 #3 [ 0.171238] smp: Brought up 1 node, 4 CPUs [ 0.172687] smpboot: Max logical packages: 1 [ 0.173178] smpboot: Total of 4 processors activated (18399.96 BogoMIPS) [ 0.174276] devtmpfs: initialized [ 0.174750] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.175180] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.176207] pinctrl core: initialized pinctrl subsystem [ 0.177468] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.178343] thermal_sys: Registered thermal governor 'step_wise' [ 0.178345] thermal_sys: Registered thermal governor 'user_space' [ 0.179137] cpuidle: using governor menu [ 0.179785] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.180178] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.181106] PCI: Using configuration type 1 for base access [ 0.181339] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.199176] raid6: sse2x4 gen() 13642 MB/s [ 0.216176] raid6: sse2x2 gen() 13141 MB/s [ 0.233176] raid6: sse2x1 gen() 10146 MB/s [ 0.233735] raid6: using algorithm sse2x4 gen() 13642 MB/s [ 0.251176] raid6: .... xor() 6963 MB/s, rmw enabled [ 0.252018] raid6: using ssse3x2 recovery algorithm [ 0.252253] ACPI: Added _OSI(Module Device) [ 0.252773] ACPI: Added _OSI(Processor Device) [ 0.253177] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.253752] ACPI: Added _OSI(Processor Aggregator Device) [ 0.255057] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.256205] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.257053] ACPI: Interpreter enabled [ 0.257188] ACPI: PM: (supports S0 S3 S5) [ 0.257688] ACPI: Using IOAPIC for interrupt routing [ 0.258200] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.259177] PCI: Using E820 reservations for host bridge windows [ 0.260075] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.262120] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.262182] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.263189] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.263737] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.264247] PCI host bridge to bus 0000:00 [ 0.264684] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.265178] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.266087] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.266177] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.267177] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.268162] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.268177] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.268933] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.269587] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.271902] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.273177] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.276987] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.278177] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.279569] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.281177] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.282770] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.287167] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.289182] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.292190] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.295183] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.298187] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.300750] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.301223] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.302631] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.304896] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.306189] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.311185] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.313733] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.316178] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.317981] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.321451] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.323190] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.325930] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.327230] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.328373] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.331958] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.332466] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.333391] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.337747] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.339579] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.341200] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.343941] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.345476] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.346248] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.347082] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.347240] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.348242] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.349039] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.349241] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.350041] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.350221] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.350977] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.351187] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.351937] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.352197] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.352950] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.353187] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.353957] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.354615] iommu: Default domain type: Translated [ 0.355177] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.355990] SCSI subsystem initialized [ 0.356233] ACPI: bus type USB registered [ 0.356734] usbcore: registered new interface driver usbfs [ 0.357186] usbcore: registered new interface driver hub [ 0.357845] usbcore: registered new device driver usb [ 0.358195] pps_core: LinuxPPS API ver. 1 registered [ 0.358799] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.359183] PTP clock support registered [ 0.359693] Bluetooth: Core ver 2.22 [ 0.360193] NET: Registered PF_BLUETOOTH protocol family [ 0.360916] Bluetooth: HCI device and connection manager initialized [ 0.361178] Bluetooth: HCI socket layer initialized [ 0.361777] Bluetooth: L2CAP socket layer initialized [ 0.362184] Bluetooth: SCO socket layer initialized [ 0.362840] PCI: Using ACPI for IRQ routing [ 0.399317] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.400024] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.400173] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.400191] vgaarb: loaded [ 0.400589] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.401178] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.404305] clocksource: Switched to clocksource kvm-clock [ 0.405911] pnp: PnP ACPI init [ 0.406499] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.407612] pnp: PnP ACPI: found 5 devices [ 0.414933] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.416135] NET: Registered PF_INET protocol family [ 0.416808] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.417976] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.419026] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.419977] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.420937] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.421879] TCP: Hash tables configured (established 4096 bind 4096) [ 0.422697] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.423490] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.424397] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.425395] RPC: Registered named UNIX socket transport module. [ 0.426137] RPC: Registered udp transport module. [ 0.426723] RPC: Registered tcp transport module. [ 0.427285] RPC: Registered tcp-with-tls transport module. [ 0.427944] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.428742] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.430519] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.431292] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.432129] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.432975] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.433801] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.434981] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.436385] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.437706] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.439000] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.440293] PCI: CLS 0 bytes, default 64 [ 0.440988] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.441893] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x212731a5301, max_idle_ns: 440795317123 ns [ 0.444409] Initialise system trusted keyrings [ 0.445103] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.446195] NFS: Registering the id_resolver key type [ 0.446855] Key type id_resolver registered [ 0.447370] Key type id_legacy registered [ 0.448207] Key type cifs.idmap registered [ 0.463997] xor: automatically using best checksumming function avx [ 0.464936] Key type asymmetric registered [ 0.465436] Asymmetric key parser 'x509' registered [ 0.466068] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.466986] io scheduler mq-deadline registered [ 0.467543] io scheduler kyber registered [ 0.468062] io scheduler bfq registered [ 0.468868] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.470683] ACPI: button: Power Button [PWRF] [ 0.471889] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.473705] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.475363] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.479257] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.488225] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.490127] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.491304] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.509169] Linux agpgart interface v0.103 [ 0.509854] ACPI: bus type drm_connector registered [ 0.510608] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.511304] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.513668] Console: switching to colour dummy device 80x25 [ 0.514536] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.514538] [drm] features: -context_init [ 0.516331] [drm] number of scanouts: 1 [ 0.516853] [drm] number of cap sets: 0 [ 0.517813] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 0.521818] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.522677] Console: switching to colour frame buffer device 160x50 [ 0.561431] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.565153] brd: module loaded [ 0.566990] loop: module loaded [ 0.567619] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.569440] virtio_blk virtio3: [vda] 796894 512-byte logical blocks (408 MB/389 MiB) [ 0.590886] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.591998] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.593629] scsi host0: ahci [ 0.594187] scsi host1: ahci [ 0.594737] scsi host2: ahci [ 0.595292] scsi host3: ahci [ 0.595839] scsi host4: ahci [ 0.596377] scsi host5: ahci [ 0.596814] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.597756] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.598675] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.599580] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.600491] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.601415] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.629109] e100: Intel(R) PRO/100 Network Driver [ 0.629868] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.630582] e1000: Intel(R) PRO/1000 Network Driver [ 0.631204] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.631956] e1000e: Intel(R) PRO/1000 Network Driver [ 0.632584] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.633366] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.634061] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.636078] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.636766] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.637802] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.638797] hub 1-0:1.0: USB hub found [ 0.639290] hub 1-0:1.0: 2 ports detected [ 0.640076] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.641170] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.641907] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.648659] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.649711] hub 2-0:1.0: USB hub found [ 0.650204] hub 2-0:1.0: 6 ports detected [ 0.672754] hub 1-0:1.0: USB hub found [ 0.673324] hub 1-0:1.0: 2 ports detected [ 0.673987] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.674708] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.675754] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.676744] hub 3-0:1.0: USB hub found [ 0.677266] hub 3-0:1.0: 2 ports detected [ 0.678585] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.679294] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.680335] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.681429] hub 4-0:1.0: USB hub found [ 0.681968] hub 4-0:1.0: 2 ports detected [ 0.682661] usbcore: registered new interface driver usb-storage [ 0.683481] usbcore: registered new interface driver usbserial_generic [ 0.684312] usbserial: USB Serial support registered for generic [ 0.685193] usbcore: registered new interface driver ftdi_sio [ 0.685941] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.686898] usbcore: registered new interface driver pl2303 [ 0.687629] usbserial: USB Serial support registered for pl2303 [ 0.688423] i8042: PNP: No PS/2 controller found. [ 0.689175] mousedev: PS/2 mouse device common for all mice [ 0.690012] rtc_cmos 00:03: RTC can wake from S4 [ 0.691042] rtc_cmos 00:03: registered as rtc0 [ 0.691681] rtc_cmos 00:03: setting system clock to 2024-02-28T03:45:53 UTC (1709091953) [ 0.692749] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.694012] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.694375] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.695232] intel_pstate: CPU model not supported [ 0.696052] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.696742] sdhci: Secure Digital Host Controller Interface driver [ 0.697486] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.698257] sdhci: Copyright(c) Pierre Ossman [ 0.699855] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.700677] usbcore: registered new interface driver usbhid [ 0.701377] usbhid: USB HID core driver [ 0.701903] u32 classifier [ 0.702247] input device check on [ 0.702727] Actions configured [ 0.703230] NET: Registered PF_INET6 protocol family [ 0.704236] Segment Routing with IPv6 [ 0.704752] In-situ OAM (IOAM) with IPv6 [ 0.705270] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.706164] NET: Registered PF_PACKET protocol family [ 0.706890] Bridge firewalling registered [ 0.707409] Key type dns_resolver registered [ 0.708078] NET: Registered PF_VSOCK protocol family [ 0.709090] IPI shorthand broadcast: enabled [ 0.711293] sched_clock: Marking stable (617003096, 93594529)->(858367008, -147769383) [ 0.712386] registered taskstats version 1 [ 0.713009] Loading compiled-in X.509 certificates [ 0.715610] Key type .fscrypt registered [ 0.716122] Key type fscrypt-provisioning registered [ 0.717124] Btrfs loaded, zoned=no, fsverity=no [ 0.718057] Key type encrypted registered [ 0.718668] printk: console [netcon0] enabled [ 0.719265] netconsole: network logging started [ 0.889617] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.933850] ata5: SATA link down (SStatus 0 SControl 300) [ 0.934701] ata6: SATA link down (SStatus 0 SControl 300) [ 0.935508] ata1: SATA link down (SStatus 0 SControl 300) [ 0.936309] ata2: SATA link down (SStatus 0 SControl 300) [ 0.937161] ata4: SATA link down (SStatus 0 SControl 300) [ 0.937955] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.942574] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.943325] ata3.00: applying bridge limits [ 0.943981] ata3.00: configured for UDMA/100 [ 0.944827] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.957873] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.958768] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.977657] IP-Config: Complete: [ 0.978153] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 0.979398] host=192.168.7.4, domain=, nis-domain=(none) [ 0.980121] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 0.980123] nameserver0=8.8.8.8 [ 0.981585] clk: Disabling unused clocks [ 0.982361] md: Waiting for all devices to be available before autodetect [ 0.983053] md: If you don't use raid, use raid=noautodetect [ 0.983623] md: Autodetecting RAID arrays. [ 0.984031] md: autorun ... [ 0.984312] md: ... autorun DONE. [ 0.989107] EXT4-fs (vda): mounted filesystem d6cf9d47-f98c-43b4-b7aa-4f4e3ddfc9a2 r/w with ordered data mode. Quota mode: disabled. [ 0.990356] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 0.991038] devtmpfs: mounted [ 0.992633] Freeing unused kernel image (initmem) memory: 3380K [ 0.994638] Write protecting the kernel read-only data: 24576k [ 0.995631] Freeing unused kernel image (rodata/data gap) memory: 904K [ 0.996340] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled [ 1.035908] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 1.037253] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 1.074045] udevd[136]: starting version 3.2.14 [ 1.079554] udevd[137]: starting eudev-3.2.14 [ 1.151796] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.285335] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.337884] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.405393] EXT4-fs (vda): re-mounted d6cf9d47-f98c-43b4-b7aa-4f4e3ddfc9a2 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seat.c:39] Created VT-bound seat seat0 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seatd.c:194] seatd started Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... 00:00:00.125  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 342, uid: 1000, gid: 1000) 00:00:00.125  [c/debug/seatd/0.8.0/seatd/seat.c:170] Added client 2 to seat0 00:00:00.125  [c/debug/seatd/0.8.0/seatd/seat.c:480] Opened client 2 on seat0 [ 1.868294] weston[342]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set could not load cursor 'dnd-move' could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' could not load cursor 'dnd-none' Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDNbpwo6zK9JAJntgtdhmFWguJJ2ykT6cXlBvHS5qUdldNmY7qbsUHoR+u8pgUpQOBWqQFpj+QCP3qiu4QrHVdUpb/f+5H5YXNXJg7z7Ttmqh28qWxW3RqvmL/HNJSAQ3ksomZ2ibcHyAqa1fgrPp2KBlv8qC/nhRLvD/2m6TE5OQC/dcUPeyxHA2fuSI3J907Tkhyd2dhztkqN+pC2MhtJl5+DPGI2YqZE22qR+HC7paVQPZHfON9rtHslyrIhzln+4+PrtDoRGgDs8HW+muVilNOhX2UvzwW9ILZE4JYx/1SEvLcmzWTIyoHI0qB7guJd8jhZ6Tsz4Rpee05tikoH root@qemux86-64 Fingerprint: SHA256:Vz9xRAgu5cLEnFXgu8+Iun2Z9oxW2OzgkJ3x3wSy1Ws dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done [ 2.209940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.210639] Bluetooth: BNEP filters: protocol multicast [ 2.211944] Bluetooth: BNEP socket layer initialized * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-4945ca640b893c2251ace915edaa722886fac93f qemux86-64 /dev/ttyS0 qemux86-64 login: 00:01:15.220  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 5945, uid: 0, gid: 0) 00:01:15.221  [c/debug/seatd/0.8.0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client 00:01:15.223  [c/debug/seatd/0.8.0/seatd/client.c:177] Could not add client to target seat: Device or resource busy