[ 0.000000] Linux version 6.6.18-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT_DYNAMIC Mon Feb 26 20:12:37 UTC 2024 [ 0.000000] Command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] APIC: Static calls initialized [ 0.000000] SMBIOS 3.0.0 present. [ 0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: using sched offset of 406870249 cycles [ 0.000002] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000004] tsc: Detected 2599.996 MHz processor [ 0.001032] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000 [ 0.001050] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs [ 0.001052] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.005592] found SMP MP-table at [mem 0x000f5440-0x000f544f] [ 0.005684] ACPI: Early table checksum verification disabled [ 0.005686] ACPI: RSDP 0x00000000000F5260 000014 (v00 BOCHS ) [ 0.005694] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005698] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005702] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005705] ACPI: FACS 0x000000001FFE0000 000040 [ 0.005707] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005709] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005711] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005713] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS BXPC 00000001 BXPC 00000001) [ 0.005715] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a] [ 0.005717] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216] [ 0.005717] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f] [ 0.005718] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a] [ 0.005718] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2] [ 0.005719] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e] [ 0.005720] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436] [ 0.005752] Zone ranges: [ 0.005753] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.005766] DMA32 [mem 0x0000000001000000-0x000000001ffd7fff] [ 0.005767] Normal empty [ 0.005768] Movable zone start for each node [ 0.005769] Early memory node ranges [ 0.005769] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.005770] node 0: [mem 0x0000000000100000-0x000000001ffd7fff] [ 0.005771] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff] [ 0.006155] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.006170] On node 0, zone DMA: 97 pages in unavailable ranges [ 0.007811] On node 0, zone DMA32: 40 pages in unavailable ranges [ 0.008078] ACPI: PM-Timer IO Port: 0x608 [ 0.008084] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.008102] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.008104] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.008105] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.008106] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.008107] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.008108] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.008111] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.008112] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.008114] TSC deadline timer available [ 0.008115] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.008123] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() [ 0.008135] [mem 0x20000000-0xafffffff] available for PCI devices [ 0.008136] Booting paravirtualized kernel on KVM [ 0.008137] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.008140] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.008711] percpu: Embedded 56 pages/cpu s190568 r8192 d30616 u524288 [ 0.008745] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0 printk.time=1 [ 0.008825] random: crng init done [ 0.008896] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.008931] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) [ 0.008982] Built 1 zonelists, mobility grouping on. Total pages: 128728 [ 0.009539] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.010655] Memory: 477740K/523736K available (18432K kernel code, 2316K rwdata, 5240K rodata, 3380K init, 2320K bss, 45736K reserved, 0K cma-reserved) [ 0.010691] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.010698] Kernel/User page tables isolation: enabled [ 0.010716] ftrace: allocating 50989 entries in 200 pages [ 0.019819] ftrace: allocated 200 pages with 3 groups [ 0.019870] Dynamic Preempt: full [ 0.020329] rcu: Preemptible hierarchical RCU implementation. [ 0.020329] rcu: RCU event tracing is enabled. [ 0.020330] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. [ 0.020331] All grace periods are expedited (rcu_expedited). [ 0.020331] Trampoline variant of Tasks RCU enabled. [ 0.020332] Rude variant of Tasks RCU enabled. [ 0.020332] Tracing variant of Tasks RCU enabled. [ 0.020333] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.020333] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.023765] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16 [ 0.023940] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.024025] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.027122] Console: colour VGA+ 80x25 [ 0.027148] printk: console [ttyS0] enabled [ 0.103099] ACPI: Core revision 20230628 [ 0.103649] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.104671] APIC: Switch to symmetric I/O mode setup [ 0.105348] x2apic enabled [ 0.105855] APIC: Switched APIC routing to: physical x2apic [ 0.107075] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.107838] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.108971] Calibrating delay loop (skipped) preset value.. 5199.99 BogoMIPS (lpj=2599996) [ 0.110054] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.110654] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.110973] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.111974] Spectre V2 : Mitigation: Retpolines [ 0.112442] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.112972] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.113972] Speculative Store Bypass: Vulnerable [ 0.114973] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.115718] MMIO Stale Data: Unknown: No mitigations [ 0.115973] SRBDS: Unknown: Dependent on hypervisor status [ 0.116980] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.117791] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.117972] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.118973] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.119973] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.140257] Freeing SMP alternatives memory: 52K [ 0.140803] pid_max: default: 32768 minimum: 301 [ 0.140990] LSM: initializing lsm=capability,landlock,integrity [ 0.141977] landlock: Up and running. [ 0.142388] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.142974] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.144188] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.145139] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.145958] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.145991] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.146916] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only. [ 0.146986] signal: max sigframe size: 1776 [ 0.147491] rcu: Hierarchical SRCU implementation. [ 0.147973] rcu: Max phase no-delay instances is 400. [ 0.148717] smp: Bringing up secondary CPUs ... [ 0.149059] smpboot: x86: Booting SMP configuration: [ 0.149699] .... node #0, CPUs: #1 #2 #3 [ 0.150028] smp: Brought up 1 node, 4 CPUs [ 0.151413] smpboot: Max logical packages: 1 [ 0.151892] smpboot: Total of 4 processors activated (20799.96 BogoMIPS) [ 0.152257] devtmpfs: initialized [ 0.153007] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.153975] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.154998] pinctrl core: initialized pinctrl subsystem [ 0.156259] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.157049] thermal_sys: Registered thermal governor 'step_wise' [ 0.157051] thermal_sys: Registered thermal governor 'user_space' [ 0.157711] cpuidle: using governor menu [ 0.159096] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.159976] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry [ 0.160790] PCI: Using configuration type 1 for base access [ 0.161108] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.178973] raid6: sse2x4 gen() 16979 MB/s [ 0.195972] raid6: sse2x2 gen() 16338 MB/s [ 0.212972] raid6: sse2x1 gen() 12685 MB/s [ 0.213480] raid6: using algorithm sse2x4 gen() 16979 MB/s [ 0.230972] raid6: .... xor() 9353 MB/s, rmw enabled [ 0.231557] raid6: using ssse3x2 recovery algorithm [ 0.232024] ACPI: Added _OSI(Module Device) [ 0.232468] ACPI: Added _OSI(Processor Device) [ 0.232926] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.232974] ACPI: Added _OSI(Processor Aggregator Device) [ 0.234273] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.235812] ACPI: _OSC evaluation for CPUs failed, trying _PDC [ 0.236070] ACPI: Interpreter enabled [ 0.236542] ACPI: PM: (supports S0 S3 S5) [ 0.236964] ACPI: Using IOAPIC for interrupt routing [ 0.236992] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.237973] PCI: Using E820 reservations for host bridge windows [ 0.238632] ACPI: Enabled 2 GPEs in block 00 to 3F [ 0.240776] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.240977] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 0.241947] acpi PNP0A08:00: _OSC: platform does not support [LTR] [ 0.242032] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability] [ 0.242847] PCI host bridge to bus 0000:00 [ 0.242974] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.243663] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.243975] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.244974] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window] [ 0.245850] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window] [ 0.245974] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window] [ 0.246841] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.247033] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.247995] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000 [ 0.249644] pci 0000:00:01.0: reg 0x10: [io 0xc0c0-0xc0df] [ 0.250973] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff] [ 0.254732] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref] [ 0.255973] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.257324] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00 [ 0.258922] pci 0000:00:02.0: reg 0x10: [io 0xc0e0-0xc0ff] [ 0.259974] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff] [ 0.263402] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref] [ 0.265196] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000 [ 0.267980] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref] [ 0.272979] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref] [ 0.275986] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff] [ 0.280991] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref] [ 0.281856] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.282420] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000 [ 0.284975] pci 0000:00:04.0: reg 0x10: [io 0xc000-0xc07f] [ 0.287975] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff] [ 0.292975] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref] [ 0.297526] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300 [ 0.299370] pci 0000:00:1d.0: reg 0x20: [io 0xc100-0xc11f] [ 0.300692] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300 [ 0.302740] pci 0000:00:1d.1: reg 0x20: [io 0xc120-0xc13f] [ 0.303849] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300 [ 0.306305] pci 0000:00:1d.2: reg 0x20: [io 0xc140-0xc15f] [ 0.307579] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320 [ 0.308266] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff] [ 0.310604] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100 [ 0.311218] pci 0000:00:1f.0: quirk: [io 0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO [ 0.312133] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601 [ 0.315973] pci 0000:00:1f.2: reg 0x20: [io 0xc160-0xc17f] [ 0.316974] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff] [ 0.318165] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500 [ 0.320075] pci 0000:00:1f.3: reg 0x20: [io 0x0700-0x073f] [ 0.321415] ACPI: PCI: Interrupt link LNKA configured for IRQ 10 [ 0.322042] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.322718] ACPI: PCI: Interrupt link LNKC configured for IRQ 11 [ 0.323034] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.323733] ACPI: PCI: Interrupt link LNKE configured for IRQ 10 [ 0.324040] ACPI: PCI: Interrupt link LNKF configured for IRQ 10 [ 0.324703] ACPI: PCI: Interrupt link LNKG configured for IRQ 11 [ 0.325024] ACPI: PCI: Interrupt link LNKH configured for IRQ 11 [ 0.325791] ACPI: PCI: Interrupt link GSIA configured for IRQ 16 [ 0.325982] ACPI: PCI: Interrupt link GSIB configured for IRQ 17 [ 0.326718] ACPI: PCI: Interrupt link GSIC configured for IRQ 18 [ 0.326982] ACPI: PCI: Interrupt link GSID configured for IRQ 19 [ 0.327599] ACPI: PCI: Interrupt link GSIE configured for IRQ 20 [ 0.327981] ACPI: PCI: Interrupt link GSIF configured for IRQ 21 [ 0.328636] ACPI: PCI: Interrupt link GSIG configured for IRQ 22 [ 0.328983] ACPI: PCI: Interrupt link GSIH configured for IRQ 23 [ 0.329997] iommu: Default domain type: Translated [ 0.330517] iommu: DMA domain TLB invalidation policy: lazy mode [ 0.331038] SCSI subsystem initialized [ 0.331479] ACPI: bus type USB registered [ 0.331998] usbcore: registered new interface driver usbfs [ 0.332616] usbcore: registered new interface driver hub [ 0.332984] usbcore: registered new device driver usb [ 0.333591] pps_core: LinuxPPS API ver. 1 registered [ 0.333973] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.334913] PTP clock support registered [ 0.335173] Bluetooth: Core ver 2.22 [ 0.335630] NET: Registered PF_BLUETOOTH protocol family [ 0.335975] Bluetooth: HCI device and connection manager initialized [ 0.336654] Bluetooth: HCI socket layer initialized [ 0.336974] Bluetooth: L2CAP socket layer initialized [ 0.337541] Bluetooth: SCO socket layer initialized [ 0.338013] PCI: Using ACPI for IRQ routing [ 0.369178] pci 0000:00:03.0: vgaarb: setting as boot VGA device [ 0.369587] pci 0000:00:03.0: vgaarb: bridge control possible [ 0.369971] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.369975] vgaarb: loaded [ 0.370302] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.370803] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.374066] clocksource: Switched to clocksource kvm-clock [ 0.375393] pnp: PnP ACPI init [ 0.375835] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved [ 0.376680] pnp: PnP ACPI: found 5 devices [ 0.383245] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.384229] NET: Registered PF_INET protocol family [ 0.384752] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.385656] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear) [ 0.386491] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.387260] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 0.388010] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.388730] TCP: Hash tables configured (established 4096 bind 4096) [ 0.389383] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.390016] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.390708] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.391489] RPC: Registered named UNIX socket transport module. [ 0.392087] RPC: Registered udp transport module. [ 0.392539] RPC: Registered tcp transport module. [ 0.393009] RPC: Registered tcp-with-tls transport module. [ 0.393571] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.394194] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.394784] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.395416] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.396064] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window] [ 0.396819] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window] [ 0.397513] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window] [ 0.398429] ACPI: \_SB_.GSIA: Enabled at IRQ 16 [ 0.399562] ACPI: \_SB_.GSIB: Enabled at IRQ 17 [ 0.400618] ACPI: \_SB_.GSIC: Enabled at IRQ 18 [ 0.401686] ACPI: \_SB_.GSID: Enabled at IRQ 19 [ 0.402756] PCI: CLS 0 bytes, default 64 [ 0.403375] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer [ 0.404900] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a386c905, max_idle_ns: 440795250529 ns [ 0.406528] Initialise system trusted keyrings [ 0.407081] workingset: timestamp_bits=46 max_order=17 bucket_order=0 [ 0.407861] NFS: Registering the id_resolver key type [ 0.408390] Key type id_resolver registered [ 0.408810] Key type id_legacy registered [ 0.410045] Key type cifs.idmap registered [ 0.422461] xor: automatically using best checksumming function avx [ 0.423193] Key type asymmetric registered [ 0.423593] Asymmetric key parser 'x509' registered [ 0.424082] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.424827] io scheduler mq-deadline registered [ 0.425328] io scheduler kyber registered [ 0.425732] io scheduler bfq registered [ 0.426417] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.428184] ACPI: button: Power Button [PWRF] [ 0.429458] ACPI: \_SB_.GSIF: Enabled at IRQ 21 [ 0.430943] ACPI: \_SB_.GSIG: Enabled at IRQ 22 [ 0.432318] ACPI: \_SB_.GSIH: Enabled at IRQ 23 [ 0.438471] ACPI: \_SB_.GSIE: Enabled at IRQ 20 [ 0.449038] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.449998] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 0.450930] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.456456] Linux agpgart interface v0.103 [ 0.457037] ACPI: bus type drm_connector registered [ 0.457616] [drm] pci: virtio-vga detected at 0000:00:03.0 [ 0.458172] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console [ 0.459986] Console: switching to colour dummy device 80x25 [ 0.460667] [drm] features: -virgl +edid -resource_blob -host_visible [ 0.460669] [drm] features: -context_init [ 0.462085] [drm] number of scanouts: 1 [ 0.462514] [drm] number of cap sets: 0 [ 0.463316] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 0.467172] fbcon: virtio_gpudrmfb (fb0) is primary device [ 0.478787] Console: switching to colour frame buffer device 160x50 [ 0.499299] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 0.503518] brd: module loaded [ 0.505285] loop: module loaded [ 0.506200] virtio_blk virtio3: 4/0/0 default/read/poll queues [ 0.508566] virtio_blk virtio3: [vda] 798744 512-byte logical blocks (409 MB/390 MiB) [ 0.522114] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 0.522982] ahci 0000:00:1f.2: flags: 64bit ncq only [ 0.524273] scsi host0: ahci [ 0.524900] scsi host1: ahci [ 0.525456] scsi host2: ahci [ 0.526008] scsi host3: ahci [ 0.526601] scsi host4: ahci [ 0.527119] scsi host5: ahci [ 0.527493] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34 [ 0.528312] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34 [ 0.529093] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34 [ 0.529815] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34 [ 0.530517] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34 [ 0.531235] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34 [ 0.539659] e100: Intel(R) PRO/100 Network Driver [ 0.540274] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.540865] e1000: Intel(R) PRO/1000 Network Driver [ 0.541381] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.541948] e1000e: Intel(R) PRO/1000 Network Driver [ 0.542439] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.543009] igb: Intel(R) Gigabit Ethernet Network Driver [ 0.543659] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.544931] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.546049] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 0.546804] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100 [ 0.547639] hub 1-0:1.0: USB hub found [ 0.548080] hub 1-0:1.0: 2 ports detected [ 0.548711] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 0.549709] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.550613] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000 [ 0.558083] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.558941] hub 2-0:1.0: USB hub found [ 0.559346] hub 2-0:1.0: 6 ports detected [ 0.581132] hub 1-0:1.0: USB hub found [ 0.581760] hub 1-0:1.0: 2 ports detected [ 0.582569] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.583183] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.584094] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120 [ 0.584983] hub 3-0:1.0: USB hub found [ 0.585473] hub 3-0:1.0: 2 ports detected [ 0.586568] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.587179] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.588082] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140 [ 0.588888] hub 4-0:1.0: USB hub found [ 0.589351] hub 4-0:1.0: 2 ports detected [ 0.590215] usbcore: registered new interface driver usb-storage [ 0.591644] usbcore: registered new interface driver usbserial_generic [ 0.592531] usbserial: USB Serial support registered for generic [ 0.593253] usbcore: registered new interface driver ftdi_sio [ 0.593951] usbserial: USB Serial support registered for FTDI USB Serial Device [ 0.594859] usbcore: registered new interface driver pl2303 [ 0.595443] usbserial: USB Serial support registered for pl2303 [ 0.596211] i8042: PNP: No PS/2 controller found. [ 0.596804] mousedev: PS/2 mouse device common for all mice [ 0.597525] rtc_cmos 00:03: RTC can wake from S4 [ 0.598392] rtc_cmos 00:03: registered as rtc0 [ 0.598996] rtc_cmos 00:03: setting system clock to 2024-03-01T11:33:11 UTC (1709292791) [ 0.599966] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs [ 0.601102] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 0.601112] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 0.601855] i2c i2c-0: 1/1 memory slots populated (from DMI) [ 0.602882] intel_pstate: CPU model not supported [ 0.603477] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD [ 0.604094] sdhci: Secure Digital Host Controller Interface driver [ 0.605691] sdhci: Copyright(c) Pierre Ossman [ 0.606199] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.606848] usbcore: registered new interface driver usbhid [ 0.607521] usbhid: USB HID core driver [ 0.608003] u32 classifier [ 0.608326] input device check on [ 0.608707] Actions configured [ 0.609169] NET: Registered PF_INET6 protocol family [ 0.610094] Segment Routing with IPv6 [ 0.610546] In-situ OAM (IOAM) with IPv6 [ 0.610966] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 0.611787] NET: Registered PF_PACKET protocol family [ 0.612363] Bridge firewalling registered [ 0.612839] Key type dns_resolver registered [ 0.613399] NET: Registered PF_VSOCK protocol family [ 0.614350] IPI shorthand broadcast: enabled [ 0.616272] sched_clock: Marking stable (534092379, 82024896)->(712138887, -96021612) [ 0.617335] registered taskstats version 1 [ 0.617839] Loading compiled-in X.509 certificates [ 0.619634] Key type .fscrypt registered [ 0.620096] Key type fscrypt-provisioning registered [ 0.620895] Btrfs loaded, zoned=no, fsverity=no [ 0.621775] Key type encrypted registered [ 0.622264] printk: console [netcon0] enabled [ 0.622725] netconsole: network logging started [ 0.795080] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 0.847498] ata6: SATA link down (SStatus 0 SControl 300) [ 0.848202] ata2: SATA link down (SStatus 0 SControl 300) [ 0.848909] ata1: SATA link down (SStatus 0 SControl 300) [ 0.849684] ata5: SATA link down (SStatus 0 SControl 300) [ 0.850343] ata4: SATA link down (SStatus 0 SControl 300) [ 0.851031] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.851839] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 0.852464] ata3.00: applying bridge limits [ 0.853035] ata3.00: configured for UDMA/100 [ 0.853786] scsi 2:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 0.866267] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 0.866985] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.885051] IP-Config: Complete: [ 0.887045] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 0.888230] host=192.168.7.6, domain=, nis-domain=(none) [ 0.888829] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 0.888831] nameserver0=8.8.8.8 [ 0.890062] clk: Disabling unused clocks [ 0.890664] md: Waiting for all devices to be available before autodetect [ 0.891255] md: If you don't use raid, use raid=noautodetect [ 0.891718] md: Autodetecting RAID arrays. [ 0.892050] md: autorun ... [ 0.892291] md: ... autorun DONE. [ 0.896532] EXT4-fs (vda): mounted filesystem 6960f361-99f0-4766-a3bc-b67d48e3950a r/w with ordered data mode. Quota mode: disabled. [ 0.897561] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 0.898117] devtmpfs: mounted [ 0.899669] Freeing unused kernel image (initmem) memory: 3380K [ 0.907073] Write protecting the kernel read-only data: 24576k [ 0.907978] Freeing unused kernel image (rodata/data gap) memory: 904K [ 0.908622] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled [ 0.945363] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1 [ 0.946506] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0 Starting udev [ 0.976019] udevd[139]: starting version 3.2.14 [ 0.980697] udevd[140]: starting eudev-3.2.14 [ 1.062079] usb 2-2: new high-speed USB device number 3 using ehci-pci [ 1.196294] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2 [ 1.249245] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0 [ 1.314123] EXT4-fs (vda): re-mounted 6960f361-99f0-4766-a3bc-b67d48e3950a r/w. Quota mode: disabled. ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seat.c:39] Created VT-bound seat seat0 00:00:00.000  [c/debug/seatd/0.8.0/seatd/seatd.c:194] seatd started Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while... 00:00:00.121  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 343, uid: 1000, gid: 1000) 00:00:00.121  [c/debug/seatd/0.8.0/seatd/seat.c:170] Added client 2 to seat0 00:00:00.121  [c/debug/seatd/0.8.0/seatd/seat.c:480] Opened client 2 on seat0 [ 1.730426] weston[343]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set could not load cursor 'dnd-move' could not load cursor 'dnd-copy' could not load cursor 'dnd-move' could not load cursor 'dnd-none' could not load cursor 'dnd-copy' could not load cursor 'dnd-none' Public key portion is: ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCtBR6jsPtg6B+z28URMhD2zcZ6ZSaSik/4TaAaw7ZsgFLUoLyCDZnkarST2Qq+012DS3WXIYprb4xouowhLqNgSW2y1jtCPzzyLxu6GEDT/QbkCbDuAFYB6+Jdbio/Ij8oqtykVKI9NgXAKw33dECzXJ4ohJ32oySVb+0CF+48USU6xwI+APtbGMbiqH5fG1N35lIXYHennay6tzuSmFiXjqMTMA+MlAgEJL0Arp7elPwKYujMXr1lhh4KDHccDUbOvMIulD5ef5ZqACld/nocCRt8E5/F2oJEN6E7UTt+u8RDdIDegS4OdxUx779B9rbH6WCRv+MxP6ttbYSsf0pX root@qemux86-64 Fingerprint: SHA256:W7cZbuYnf0/wmCMy+eHzonKtKVuDaUn1dtdWT6ZNRPg dropbear. Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done [ 1.881354] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.881913] Bluetooth: BNEP filters: protocol multicast [ 1.882388] Bluetooth: BNEP socket layer initialized * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-0f7c215726cc82089d1d6a5503e0378d21219a80 qemux86-64 /dev/ttyS0 qemux86-64 login: 00:01:15.254  [c/debug/seatd/0.8.0/seatd/server.c:145] New client connected (pid: 5945, uid: 0, gid: 0) 00:01:15.254  [c/debug/seatd/0.8.0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client 00:01:15.254  [c/debug/seatd/0.8.0/seatd/client.c:177] Could not add client to target seat: Device or resource busy