[ 0.000000] Linux version 6.6.18-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Mon Feb 26 20:12:48 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239296K/262140K available (14185K kernel code, 1469K rwdata, 2736K rodata, 416K init, 394K bss, 22844K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.03 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11944366177 ns [ 0.000405] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13420636156ns [ 0.021811] Console: colour dummy device 80x25 [ 0.023261] printk: console [tty0] enabled [ 0.025149] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.18-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Mon Feb 26 20:12:48 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239296K/262140K available (14185K kernel code, 1469K rwdata, 2736K rodata, 416K init, 394K bss, 22844K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.03 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11944366177 ns [ 0.000405] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13420636156ns [ 0.021811] Console: colour dummy device 80x25 [ 0.023261] printk: console [tty0] enabled [ 0.025149] printk: bootconsole [uart8250] disabled [ 0.029033] Calibrating delay loop... 847.05 BogoMIPS (lpj=4235264) [ 0.099240] pid_max: default: 32768 minimum: 301 [ 0.102150] LSM: initializing lsm=capability,landlock,integrity [ 0.103328] landlock: Up and running. [ 0.109422] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.109781] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.187717] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.188498] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.190118] Performance counters: No available PMU. [ 0.192721] rcu: Hierarchical SRCU implementation. [ 0.192865] rcu: Max phase no-delay instances is 1000. [ 0.208384] smp: Bringing up secondary CPUs ... [ 0.209095] smp: Brought up 1 node, 1 CPU [ 0.235243] devtmpfs: initialized [ 0.251575] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.252235] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.270886] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.718420] raid6: int32x8 gen() 121 MB/s [ 1.092242] raid6: int32x4 gen() 322 MB/s [ 1.443602] raid6: int32x2 gen() 423 MB/s [ 1.818036] raid6: int32x1 gen() 284 MB/s [ 1.818361] raid6: using algorithm int32x2 gen() 423 MB/s [ 2.197890] raid6: .... xor() 199 MB/s, rmw enabled [ 2.198257] raid6: using intx1 recovery algorithm [ 2.204482] SCSI subsystem initialized [ 2.205943] usbcore: registered new interface driver usbfs [ 2.206645] usbcore: registered new interface driver hub [ 2.207149] usbcore: registered new device driver usb [ 2.218907] pps_core: LinuxPPS API ver. 1 registered [ 2.219112] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.219445] PTP clock support registered [ 2.278371] PCI host bridge to bus 0000:00 [ 2.279177] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.280287] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.280638] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.284780] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 2.286872] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 2.287229] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.287546] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.287759] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.287962] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.288160] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.295359] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.297325] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.298015] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.298314] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.298468] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.298654] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.298812] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.299673] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.300019] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.301229] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.302793] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.303102] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.304703] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.304908] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.305201] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.305418] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.306548] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.306949] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.307256] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.307561] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.309015] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.309250] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.309495] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.310458] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.310671] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.310912] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.312474] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.315455] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.316461] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.316933] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.317153] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.317482] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.317711] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.317975] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.318210] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.318382] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.318517] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.318664] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.318823] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.324018] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 2.324329] pci 0000:00:12.0: vgaarb: bridge control possible [ 2.324552] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.324810] vgaarb: loaded [ 2.329568] clocksource: Switched to clocksource MIPS [ 2.416766] NET: Registered PF_INET protocol family [ 2.419669] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.435812] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.436324] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.436619] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.437076] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 2.437458] TCP: Hash tables configured (established 2048 bind 2048) [ 2.440628] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.441276] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.444780] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.452315] RPC: Registered named UNIX socket transport module. [ 2.452608] RPC: Registered udp transport module. [ 2.452740] RPC: Registered tcp transport module. [ 2.452846] RPC: Registered tcp-with-tls transport module. [ 2.452943] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.454543] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 2.456380] PCI: CLS 0 bytes, default 16 [ 2.476265] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.486513] NFS: Registering the id_resolver key type [ 2.490132] Key type id_resolver registered [ 2.490368] Key type id_legacy registered [ 2.494954] Key type cifs.idmap registered [ 3.193556] xor: measuring software checksum speed [ 3.210710] 8regs : 607 MB/sec [ 3.229668] 8regs_prefetch : 621 MB/sec [ 3.245529] 32regs : 767 MB/sec [ 3.263236] 32regs_prefetch : 733 MB/sec [ 3.263567] xor: using function: 32regs (767 MB/sec) [ 3.264342] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 3.264609] io scheduler mq-deadline registered [ 3.264813] io scheduler kyber registered [ 3.274307] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 3.280448] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 3.282755] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 3.286167] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 3.298993] printk: console [ttyS0] disabled [ 3.327692] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 3.328051] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 3.332100] printk: console [ttyS0] enabled [ 3.477490] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.478946] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 3.480044] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 3.496927] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 3.501545] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 3.503769] [drm] Found bochs VGA, ID 0xb0c5. [ 3.504493] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 3.513473] [drm] Found EDID data blob. [ 3.529030] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 3.659556] Console: switching to colour frame buffer device 160x50 [ 3.682894] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 3.726239] brd: module loaded [ 3.727726] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 3.738490] virtio_blk virtio2: [vda] 1131076 512-byte logical blocks (579 MB/552 MiB) [ 3.769956] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 3.772358] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 3.774068] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 3.787684] hub 1-0:1.0: USB hub found [ 3.789288] hub 1-0:1.0: 2 ports detected [ 3.797850] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.802452] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.807703] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.811830] usbcore: registered new interface driver usbhid [ 3.812403] usbhid: USB HID core driver [ 3.813483] u32 classifier [ 3.813837] input device check on [ 3.814234] Actions configured [ 3.815978] NET: Registered PF_INET6 protocol family [ 3.828136] Segment Routing with IPv6 [ 3.830401] In-situ OAM (IOAM) with IPv6 [ 3.834657] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.839135] NET: Registered PF_PACKET protocol family [ 3.840490] Bridge firewalling registered [ 3.842153] Key type dns_resolver registered [ 3.843445] NET: Registered PF_VSOCK protocol family [ 3.879504] registered taskstats version 1 [ 3.911278] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.955711] Key type .fscrypt registered [ 3.968513] Key type fscrypt-provisioning registered [ 3.997282] Btrfs loaded, zoned=no, fsverity=no [ 4.044312] Key type encrypted registered [ 4.065055] printk: console [netcon0] enabled [ 4.077338] netconsole: network logging started [ 4.109381] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 4.390221] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 4.415532] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 4.572897] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 4.689651] IP-Config: Complete: [ 4.728846] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 4.771645] host=192.168.7.6, domain=, nis-domain=(none) [ 4.788598] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.788785] nameserver0=8.8.8.8 [ 4.845063] clk: Disabling unused clocks [ 4.868790] md: Waiting for all devices to be available before autodetect [ 4.886447] md: If you don't use raid, use raid=noautodetect [ 4.898603] md: Autodetecting RAID arrays. [ 4.904138] md: autorun ... [ 4.930934] md: ... autorun DONE. [ 5.003965] EXT4-fs (vda): mounted filesystem 86dac36d-c83d-422a-a2fb-675e86be85da r/w with ordered data mode. Quota mode: disabled. [ 5.027058] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.041574] devtmpfs: mounted [ 5.125001] Freeing unused kernel image (initmem) memory: 416K [ 5.138546] This architecture does not have kernel memory protection. [ 5.143874] Run /sbin/init as init process [ 5.193248] process '/sbin/init.sysvinit' started with executable stack [ 8.103093] udevd[92]: starting version 3.2.14 [ 8.258159] udevd[93]: starting eudev-3.2.14 [ 17.899785] EXT4-fs (vda): re-mounted 86dac36d-c83d-422a-a2fb-675e86be85da r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5 bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.18-yocto-standard #1 SMP PREEMPT Mon Feb 26 20:12:48 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 3 00:52:09 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-3b3f67ba747928d243e54a7edf7955b7178e52ff qemumips /dev/ttyS0 qemumips login: