[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.20-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Sun Mar 3 16:28:22 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10645K kernel code, 1425K rwdata, 2836K rodata, 464K init, 339K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42220 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000261] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001345] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.009559] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.020050] Console: colour dummy device 80x30 [ 0.022843] Calibrating delay loop... 489.06 BogoMIPS (lpj=2445312) [ 0.129265] CPU: Testing write buffer coherency: ok [ 0.132364] pid_max: default: 32768 minimum: 301 [ 0.135208] LSM: initializing lsm=capability,landlock,integrity [ 0.136070] landlock: Up and running. [ 0.141167] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.141363] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.233299] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.236101] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.237754] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.241553] Setting up static identity map for 0x8400 - 0x8458 [ 0.243738] rcu: Hierarchical SRCU implementation. [ 0.243849] rcu: Max phase no-delay instances is 1000. [ 0.276749] devtmpfs: initialized [ 0.315744] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.319767] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.320194] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.345101] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.355773] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.472299] Serial: AMBA PL011 UART driver [ 0.493799] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.496870] printk: console [ttyAMA0] enabled [ 0.559564] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.567269] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.574157] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.579144] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.596511] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.999470] raid6: int32x8 gen() 36 MB/s [ 1.338875] raid6: int32x4 gen() 45 MB/s [ 1.678824] raid6: int32x2 gen() 228 MB/s [ 2.028838] raid6: int32x1 gen() 57 MB/s [ 2.029801] raid6: using algorithm int32x2 gen() 228 MB/s [ 2.368872] raid6: .... xor() 132 MB/s, rmw enabled [ 2.369684] raid6: using intx1 recovery algorithm [ 2.378316] SCSI subsystem initialized [ 2.393214] usbcore: registered new interface driver usbfs [ 2.409992] usbcore: registered new interface driver hub [ 2.417607] usbcore: registered new device driver usb [ 2.461387] pps_core: LinuxPPS API ver. 1 registered [ 2.468002] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.499525] PTP clock support registered [ 2.514204] Advanced Linux Sound Architecture Driver Initialized. [ 2.614247] vgaarb: loaded [ 2.649012] clocksource: Switched to clocksource arm,sp804 [ 3.540416] NET: Registered PF_INET protocol family [ 3.546014] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 3.576785] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 3.587413] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 3.590600] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 3.591765] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 3.593051] TCP: Hash tables configured (established 2048 bind 2048) [ 3.596901] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.599327] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 3.604959] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 3.624134] RPC: Registered named UNIX socket transport module. [ 3.632557] RPC: Registered udp transport module. [ 3.638441] RPC: Registered tcp transport module. [ 3.640404] RPC: Registered tcp-with-tls transport module. [ 3.642493] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.643225] PCI: CLS 0 bytes, default 32 [ 3.660167] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.684690] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.706309] NFS: Registering the id_resolver key type [ 3.715597] Key type id_resolver registered [ 3.727185] Key type id_legacy registered [ 3.744800] Key type cifs.idmap registered [ 4.248500] xor: measuring software checksum speed [ 4.279169] arm4regs : 483 MB/sec [ 4.303202] 8regs : 582 MB/sec [ 4.328396] 32regs : 547 MB/sec [ 4.335170] xor: using function: 8regs (582 MB/sec) [ 4.341638] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 4.342942] io scheduler mq-deadline registered [ 4.344231] io scheduler kyber registered [ 4.345789] io scheduler bfq registered [ 4.359729] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 4.364407] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 4.370145] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 4.375060] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 4.386666] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 4.398517] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 4.409618] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 4.415052] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 4.419173] versatile-pci 10001000.pci: PCI core found (slot 11) [ 4.432508] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 4.442123] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.451186] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 4.456040] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 4.456549] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 4.463282] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 4.467030] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 4.475177] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 4.486643] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 4.499372] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 4.507338] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 4.513322] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.516923] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 4.520503] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 4.527412] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 4.529899] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.534837] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 4.535843] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 4.538323] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 4.543113] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.548008] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 4.548549] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 4.556978] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 4.565310] PCI: bus0: Fast back to back transfers disabled [ 4.576809] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 4.587894] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 4.594538] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 4.598259] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 4.599744] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 4.600419] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 4.600826] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 4.601209] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 4.601607] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 4.601989] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 4.602310] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 4.602648] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 4.606218] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 4.616315] pci 0000:00:0f.0: quirk_usb_early_handoff+0x0/0x704 took 10886 usecs [ 4.631582] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.643740] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.660269] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 4.676402] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 4.688636] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 4.701961] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 4.717540] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.775494] random: crng init done [ 4.787373] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 4.797363] [drm] features: -virgl +edid -resource_blob -host_visible [ 4.797538] [drm] features: -context_init [ 4.812690] [drm] number of scanouts: 1 [ 4.817819] [drm] number of cap sets: 0 [ 4.858024] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 5.173109] Console: switching to colour frame buffer device 160x50 [ 5.243923] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 5.273816] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 5.278608] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.452993] brd: module loaded [ 5.469910] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 5.483241] virtio_blk virtio3: [vda] 958354 512-byte logical blocks (491 MB/468 MiB) [ 5.536883] physmap-flash 34000000.flash: versatile/realview flash protection [ 5.568419] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 5.573676] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 5.577177] Intel/Sharp Extended Query Table at 0x0031 [ 5.579000] Using buffer write method [ 5.652399] smc91x: not found (-19). [ 5.654765] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 5.655393] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 5.731454] rtc-ds1307 0-0068: registered as rtc0 [ 5.747181] rtc-ds1307 0-0068: setting system clock to 2024-03-05T10:56:56 UTC (1709636216) [ 5.762188] rtc-pl031 101e8000.rtc: registered as rtc1 [ 5.771725] i2c_dev: i2c /dev entries driver [ 5.784715] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 5.796723] versatile reboot driver registered [ 5.808227] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 5.832730] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 5.843149] leds-syscon 10000008.0.led: registered LED (null) [ 5.845410] leds-syscon 10000008.1.led: registered LED (null) [ 5.847012] leds-syscon 10000008.2.led: registered LED (null) [ 5.860394] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 5.879613] leds-syscon 10000008.3.led: registered LED (null) [ 5.887794] leds-syscon 10000008.4.led: registered LED (null) [ 5.901449] leds-syscon 10000008.5.led: registered LED (null) [ 5.907208] leds-syscon 10000008.6.led: registered LED (null) [ 5.914277] leds-syscon 10000008.7.led: registered LED (null) [ 5.918304] ledtrig-cpu: registered to indicate activity on CPUs [ 5.923874] usbcore: registered new interface driver usbhid [ 5.924644] usbhid: USB HID core driver [ 5.971029] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 5.974764] aaci-pl041 10004000.aaci: FIFO 512 entries [ 5.982182] u32 classifier [ 5.982786] input device check on [ 5.983258] Actions configured [ 5.987219] NET: Registered PF_INET6 protocol family [ 6.017314] Segment Routing with IPv6 [ 6.020719] In-situ OAM (IOAM) with IPv6 [ 6.023697] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 6.034568] NET: Registered PF_PACKET protocol family [ 6.037598] Bridge firewalling registered [ 6.044565] Key type dns_resolver registered [ 6.052456] NET: Registered PF_VSOCK protocol family [ 6.188046] registered taskstats version 1 [ 6.295553] Key type .fscrypt registered [ 6.296380] Key type fscrypt-provisioning registered [ 6.334516] Btrfs loaded, zoned=no, fsverity=no [ 6.356194] Key type encrypted registered [ 6.371094] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.372262] clcd-pl11x: probe of 10120000.display failed with error -2 [ 6.375047] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.381241] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.382376] clcd-pl11x: probe of 10120000.display failed with error -2 [ 6.385183] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.391923] printk: console [netcon0] enabled [ 6.393010] netconsole: network logging started [ 6.516931] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 6.531358] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 6.532647] clcd-pl11x: probe of 10120000.display failed with error -2 [ 6.535496] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 6.630240] IP-Config: Complete: [ 6.630928] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 6.632279] host=192.168.7.6, domain=, nis-domain=(none) [ 6.632885] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 6.633023] nameserver0=8.8.8.8 [ 6.657095] clk: Disabling unused clocks [ 6.658526] ALSA device list: [ 6.660979] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 6.673077] md: Waiting for all devices to be available before autodetect [ 6.673678] md: If you don't use raid, use raid=noautodetect [ 6.674189] md: Autodetecting RAID arrays. [ 6.674563] md: autorun ... [ 6.674808] md: ... autorun DONE. [ 6.922627] EXT4-fs (vda): mounted filesystem 0e79e6ff-843b-44df-904a-dda73721fd37 r/w with ordered data mode. Quota mode: disabled. [ 6.925273] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 6.932571] devtmpfs: mounted [ 7.029649] Freeing unused kernel image (initmem) memory: 464K [ 7.030716] Kernel memory protection not selected by kernel config. [ 7.032577] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 15.059324] udevd[97]: starting version 3.2.14 [ 15.538014] udevd[98]: starting eudev-3.2.14 [ 17.146702] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 17.147695] clcd-pl11x: probe of 10120000.display failed with error -2 [ 17.170841] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 17.260002] amba 10100000.smc: deferred probe pending [ 17.266788] amba 10110000.mpmc: deferred probe pending [ 17.309643] amba 101e0000.sctl: deferred probe pending [ 17.310352] amba 101e1000.watchdog: deferred probe pending [ 17.310658] amba 101f0000.sci: deferred probe pending [ 17.310953] amba 101f4000.spi: deferred probe pending [ 17.311508] amba 1000a000.sci: deferred probe pending [ 17.317408] amba 10120000.display: deferred probe pending [ 54.234218] EXT4-fs (vda): re-mounted 0e79e6ff-843b-44df-904a-dda73721fd37 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.20-yocto-standard #1 PREEMPT Sun Mar 3 16:28:22 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 5 10:58:18 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-7c435e432b4c2b1f6cbf918216206f194d852961 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-oKIGyZbWEw,guid=243204246db9500e62404b9565e6faf6 Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[535]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=518 comm="connman-applet") dbus-daemon[535]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry