[ 0.484617] Serial: AMBA PL011 UART driver [ 0.583612] 9000000.pl011: ttyAMA0 at MMIO 0x9000000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.587094] printk: console [ttyAMA0] enabled [ 0.647435] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.672872] cryptd: max_cpu_qlen set to 1000 [ 0.865753] raid6: neonx8 gen() 330 MB/s [ 1.040106] raid6: neonx4 gen() 1199 MB/s [ 1.215543] raid6: neonx2 gen() 1358 MB/s [ 1.394323] raid6: neonx1 gen() 869 MB/s [ 1.566304] raid6: int32x8 gen() 95 MB/s [ 1.739169] raid6: int32x4 gen() 117 MB/s [ 1.912701] raid6: int32x2 gen() 277 MB/s [ 2.088715] raid6: int32x1 gen() 249 MB/s [ 2.089537] raid6: using algorithm neonx2 gen() 1358 MB/s [ 2.265847] raid6: .... xor() 381 MB/s, rmw enabled [ 2.266798] raid6: using neon recovery algorithm [ 2.276673] SCSI subsystem initialized [ 2.279437] usbcore: registered new interface driver usbfs [ 2.280848] usbcore: registered new interface driver hub [ 2.281898] usbcore: registered new device driver usb [ 2.283512] pps_core: LinuxPPS API ver. 1 registered [ 2.283984] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.284829] PTP clock support registered [ 2.323179] vgaarb: loaded [ 2.338067] clocksource: Switched to clocksource arch_sys_counter [ 2.460213] NET: Registered PF_INET protocol family [ 2.465543] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.488040] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.489482] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.490483] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.491687] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 2.493014] TCP: Hash tables configured (established 4096 bind 4096) [ 2.498216] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.499966] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.506508] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.518485] RPC: Registered named UNIX socket transport module. [ 2.519098] RPC: Registered udp transport module. [ 2.519368] RPC: Registered tcp transport module. [ 2.519629] RPC: Registered tcp-with-tls transport module. [ 2.519908] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.520585] PCI: CLS 0 bytes, default 64 [ 2.556469] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.570297] NFS: Registering the id_resolver key type [ 2.574040] Key type id_resolver registered [ 2.575938] Key type id_legacy registered [ 2.587272] Key type cifs.idmap registered [ 2.978583] xor: measuring software checksum speed [ 2.993763] arm4regs : 742 MB/sec [ 3.005648] 8regs : 940 MB/sec [ 3.018484] 32regs : 833 MB/sec [ 3.030787] neon : 1118 MB/sec [ 3.031445] xor: using function: neon (1118 MB/sec) [ 3.031999] async_tx: api initialized (async) [ 3.033049] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.033709] io scheduler mq-deadline registered [ 3.034164] io scheduler kyber registered [ 3.043673] pci-host-generic 3f000000.pcie: host bridge /pcie@10000000 ranges: [ 3.048291] pci-host-generic 3f000000.pcie: IO 0x003eff0000..0x003effffff -> 0x0000000000 [ 3.051325] pci-host-generic 3f000000.pcie: MEM 0x0010000000..0x003efeffff -> 0x0010000000 [ 3.058842] pci-host-generic 3f000000.pcie: ECAM at [mem 0x3f000000-0x3fffffff] for [bus 00-0f] [ 3.065678] pci-host-generic 3f000000.pcie: PCI host bridge to bus 0000:00 [ 3.067389] pci_bus 0000:00: root bus resource [bus 00-0f] [ 3.068550] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.069544] pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff] [ 3.074338] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 3.086438] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 3.088560] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 3.089730] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.090814] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.094026] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 3.095704] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.099230] pci 0000:00:03.0: [1af4:1050] type 00 class 0x038000 [ 3.100196] pci 0000:00:03.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 3.101046] pci 0000:00:03.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.107231] PCI: bus0: Fast back to back transfers disabled [ 3.111868] pci 0000:00:01.0: BAR 4: assigned [mem 0x10000000-0x10003fff 64bit pref] [ 3.113669] pci 0000:00:02.0: BAR 0: assigned [mem 0x10004000-0x10007fff 64bit] [ 3.115385] pci 0000:00:03.0: BAR 4: assigned [mem 0x10008000-0x1000bfff 64bit pref] [ 3.116465] pci 0000:00:01.0: BAR 1: assigned [mem 0x1000c000-0x1000cfff] [ 3.117745] pci 0000:00:03.0: BAR 1: assigned [mem 0x1000d000-0x1000dfff] [ 3.118660] pci 0000:00:01.0: BAR 0: assigned [io 0x1000-0x101f] [ 3.122561] pci 0000:00:02.0: enabling device (0100 -> 0102) [ 3.150057] virtio-pci 0000:00:01.0: enabling device (0100 -> 0103) [ 3.158659] virtio-pci 0000:00:03.0: enabling device (0100 -> 0102) [ 3.357127] printk: console [hvc0] enabled [ 3.360778] [drm] pci: virtio-gpu-pci detected at 0000:00:03.0 [ 3.391376] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.391443] [drm] features: -context_init [ 3.396507] [drm] number of scanouts: 1 [ 3.397340] [drm] number of cap sets: 0 [ 3.424047] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0 [ 3.657877] Console: switching to colour frame buffer device 160x50 [ 3.747728] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.876501] brd: module loaded [ 3.879332] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 3.895876] virtio_blk virtio1: [vda] 882766 512-byte logical blocks (452 MB/431 MiB) [ 3.967974] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 3.970792] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 3.984357] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 3.998704] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 4.000248] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 4.001908] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 4.027117] hub 1-0:1.0: USB hub found [ 4.030371] hub 1-0:1.0: 4 ports detected [ 4.044552] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.053550] hub 2-0:1.0: USB hub found [ 4.056086] hub 2-0:1.0: 4 ports detected [ 4.087152] rtc-pl031 9010000.pl031: registered as rtc0 [ 4.090612] rtc-pl031 9010000.pl031: setting system clock to 2024-03-05T18:43:06 UTC (1709664186) [ 4.101730] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4.114215] usbcore: registered new interface driver usbhid [ 4.116279] usbhid: USB HID core driver [ 4.118639] u32 classifier [ 4.119514] input device check on [ 4.120396] Actions configured [ 4.124972] NET: Registered PF_INET6 protocol family [ 4.150211] Segment Routing with IPv6 [ 4.152160] In-situ OAM (IOAM) with IPv6 [ 4.155843] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.168970] NET: Registered PF_PACKET protocol family [ 4.170782] Bridge firewalling registered [ 4.173343] Key type dns_resolver registered [ 4.187239] NET: Registered PF_VSOCK protocol family [ 4.192128] Registering SWP/SWPB emulation handler [ 4.318871] registered taskstats version 1 [ 4.345617] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 4.391054] Key type .fscrypt registered [ 4.392258] Key type fscrypt-provisioning registered [ 4.414006] Btrfs loaded, zoned=no, fsverity=no [ 4.420672] Key type encrypted registered [ 4.428058] printk: console [netcon0] enabled [ 4.429320] netconsole: network logging started [ 4.530750] IP-Config: Complete: [ 4.531924] device=eth0, hwaddr=52:54:00:12:34:14, ipaddr=192.168.7.20, mask=255.255.255.0, gw=192.168.7.19 [ 4.534221] host=192.168.7.20, domain=, nis-domain=(none) [ 4.535913] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.536061] nameserver0=8.8.8.8 [ 4.546852] clk: Disabling unused clocks [ 4.562789] input: QEMU QEMU USB Tablet as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 4.575975] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 4.580975] md: Waiting for all devices to be available before autodetect [ 4.582849] md: If you don't use raid, use raid=noautodetect [ 4.584161] md: Autodetecting RAID arrays. [ 4.585737] md: autorun ... [ 4.586435] md: ... autorun DONE. [ 4.735587] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 4.776068] EXT4-fs (vda): mounted filesystem 66944bdf-fd92-476f-84e8-faeda203c35a r/w with ordered data mode. Quota mode: disabled. [ 4.784315] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.795896] devtmpfs: mounted [ 5.125929] input: QEMU QEMU USB Keyboard as /devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 5.198419] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 [ 5.231618] Freeing unused kernel image (initmem) memory: 2048K [ 5.559054] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 10.923890] udevd[129]: starting version 3.2.14 [ 11.229978] udevd[130]: starting eudev-3.2.14 [ 20.319844] EXT4-fs (vda): re-mounted 66944bdf-fd92-476f-84e8-faeda203c35a r/w. Quota mode: disabled. [ 22.453717] uart-pl011 9000000.pl011: no DMA platform data ALSA: Restoring mixer settings... INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarm 6.6.20-yocto-standard #1 SMP PREEMPT Sun Mar 3 16:28:29 UTC 2024 armv7l Kernel command line: root=/dev/vda rw mem=512M ip=192.168.7.20::192.168.7.19:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=hvc0 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 5 18:43:37 2024 (==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-601487503453c2aa7d0cb64bc459ea7f2417935f qemuarm /dev/hvc0 qemuarm login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-pIUycfu8WC,guid=89491f2951cdeed20ed73b0565e767df Using calibration data stored in /etc/pointercal.xinput Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork dbus-daemon[561]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=543 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[561]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry [ 140.275579] hrtimer: interrupt took 45676640 ns