[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.20-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Sun Mar 3 16:28:22 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10645K kernel code, 1425K rwdata, 2836K rodata, 464K init, 339K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42220 entries in 124 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000221] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000779] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.005796] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.014249] Console: colour dummy device 80x30 [ 0.016140] Calibrating delay loop... 654.95 BogoMIPS (lpj=3274752) [ 0.119493] CPU: Testing write buffer coherency: ok [ 0.121238] pid_max: default: 32768 minimum: 301 [ 0.122891] LSM: initializing lsm=capability,landlock,integrity [ 0.123587] landlock: Up and running. [ 0.128001] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.128087] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.186566] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.187505] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.188500] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.190049] Setting up static identity map for 0x8400 - 0x8458 [ 0.191704] rcu: Hierarchical SRCU implementation. [ 0.191775] rcu: Max phase no-delay instances is 1000. [ 0.210114] devtmpfs: initialized [ 0.229311] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.231139] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.231311] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.245002] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.250772] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.308689] Serial: AMBA PL011 UART driver [ 0.319703] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.321318] printk: console [ttyAMA0] enabled [ 0.360533] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.364507] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.367819] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.370696] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.379201] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.749102] raid6: int32x8 gen() 71 MB/s [ 1.089074] raid6: int32x4 gen() 99 MB/s [ 1.429059] raid6: int32x2 gen() 432 MB/s [ 1.769249] raid6: int32x1 gen() 111 MB/s [ 1.770294] raid6: using algorithm int32x2 gen() 432 MB/s [ 2.109292] raid6: .... xor() 127 MB/s, rmw enabled [ 2.110334] raid6: using intx1 recovery algorithm [ 2.130173] SCSI subsystem initialized [ 2.134026] usbcore: registered new interface driver usbfs [ 2.135408] usbcore: registered new interface driver hub [ 2.136737] usbcore: registered new device driver usb [ 2.156843] pps_core: LinuxPPS API ver. 1 registered [ 2.157683] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.169706] PTP clock support registered [ 2.177285] Advanced Linux Sound Architecture Driver Initialized. [ 2.253999] vgaarb: loaded [ 2.273411] clocksource: Switched to clocksource arm,sp804 [ 2.605199] NET: Registered PF_INET protocol family [ 2.609498] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.629679] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.630829] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.631380] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.631948] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.634033] TCP: Hash tables configured (established 2048 bind 2048) [ 2.638112] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.639293] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.645324] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.656133] RPC: Registered named UNIX socket transport module. [ 2.657185] RPC: Registered udp transport module. [ 2.657796] RPC: Registered tcp transport module. [ 2.658371] RPC: Registered tcp-with-tls transport module. [ 2.659077] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.660242] PCI: CLS 0 bytes, default 32 [ 2.665628] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.688205] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.702467] NFS: Registering the id_resolver key type [ 2.707131] Key type id_resolver registered [ 2.707956] Key type id_legacy registered [ 2.720241] Key type cifs.idmap registered [ 3.197225] xor: measuring software checksum speed [ 3.217644] arm4regs : 562 MB/sec [ 3.234428] 8regs : 666 MB/sec [ 3.254246] 32regs : 598 MB/sec [ 3.255129] xor: using function: 8regs (666 MB/sec) [ 3.257172] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.258320] io scheduler mq-deadline registered [ 3.259052] io scheduler kyber registered [ 3.260389] io scheduler bfq registered [ 3.272368] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 3.278127] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 3.282753] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 3.288095] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 3.291602] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 3.294468] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 3.296722] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 3.297892] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 3.301225] versatile-pci 10001000.pci: PCI core found (slot 11) [ 3.306922] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 3.308350] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.309713] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.310513] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 3.311342] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 3.316835] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 3.319322] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 3.320213] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 3.320956] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 3.329132] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 3.330108] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 3.330992] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.331899] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 3.334934] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 3.335806] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 3.336506] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.338795] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 3.339524] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.341557] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 3.342361] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.345360] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 3.346191] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 3.346873] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.351230] PCI: bus0: Fast back to back transfers disabled [ 3.354973] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 3.356351] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 3.357462] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 3.358394] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 3.359200] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 3.360030] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 3.360836] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 3.361580] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 3.362305] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.363564] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 3.364294] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 3.364944] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 3.368260] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 3.374285] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.377104] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.384088] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 3.390366] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 3.394708] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 3.398862] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 3.405438] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.439781] random: crng init done [ 3.444192] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 3.445861] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.445921] [drm] features: -context_init [ 3.447840] [drm] number of scanouts: 1 [ 3.448358] [drm] number of cap sets: 0 [ 3.472518] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 3.675230] Console: switching to colour frame buffer device 160x50 [ 3.719867] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.742755] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 3.747283] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.830366] brd: module loaded [ 3.831710] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 3.842611] virtio_blk virtio3: [vda] 959196 512-byte logical blocks (491 MB/468 MiB) [ 3.885031] physmap-flash 34000000.flash: versatile/realview flash protection [ 3.911915] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 3.917899] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 3.920317] Intel/Sharp Extended Query Table at 0x0031 [ 3.922380] Using buffer write method [ 4.021412] smc91x: not found (-19). [ 4.025454] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 4.026884] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 4.086984] rtc-ds1307 0-0068: registered as rtc0 [ 4.099994] rtc-ds1307 0-0068: setting system clock to 2024-03-07T23:05:27 UTC (1709852727) [ 4.116335] rtc-pl031 101e8000.rtc: registered as rtc1 [ 4.119082] i2c_dev: i2c /dev entries driver [ 4.122239] versatile reboot driver registered [ 4.128691] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4.148434] leds-syscon 10000008.0.led: registered LED (null) [ 4.150909] leds-syscon 10000008.1.led: registered LED (null) [ 4.152691] leds-syscon 10000008.2.led: registered LED (null) [ 4.166383] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 4.173608] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 4.177190] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 4.185279] leds-syscon 10000008.3.led: registered LED (null) [ 4.187305] leds-syscon 10000008.4.led: registered LED (null) [ 4.191591] leds-syscon 10000008.5.led: registered LED (null) [ 4.204846] leds-syscon 10000008.6.led: registered LED (null) [ 4.207452] leds-syscon 10000008.7.led: registered LED (null) [ 4.210207] ledtrig-cpu: registered to indicate activity on CPUs [ 4.227986] usbcore: registered new interface driver usbhid [ 4.228907] usbhid: USB HID core driver [ 4.295537] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.296671] aaci-pl041 10004000.aaci: FIFO 512 entries [ 4.299761] u32 classifier [ 4.300178] input device check on [ 4.300630] Actions configured [ 4.304664] NET: Registered PF_INET6 protocol family [ 4.327192] Segment Routing with IPv6 [ 4.328467] In-situ OAM (IOAM) with IPv6 [ 4.330743] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.341650] NET: Registered PF_PACKET protocol family [ 4.344467] Bridge firewalling registered [ 4.347339] Key type dns_resolver registered [ 4.349985] NET: Registered PF_VSOCK protocol family [ 4.494957] registered taskstats version 1 [ 4.590664] Key type .fscrypt registered [ 4.591428] Key type fscrypt-provisioning registered [ 4.612650] Btrfs loaded, zoned=no, fsverity=no [ 4.632430] Key type encrypted registered [ 4.646568] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.647767] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.650465] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.669819] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.671047] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.674970] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.679416] printk: console [netcon0] enabled [ 4.680341] netconsole: network logging started [ 4.877699] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 4.882547] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.883767] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.894529] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.952362] IP-Config: Complete: [ 4.952824] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 4.954406] host=192.168.7.6, domain=, nis-domain=(none) [ 4.954858] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.954945] nameserver0=8.8.8.8 [ 4.965011] clk: Disabling unused clocks [ 4.965898] ALSA device list: [ 4.966226] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.974749] md: Waiting for all devices to be available before autodetect [ 4.975394] md: If you don't use raid, use raid=noautodetect [ 4.975853] md: Autodetecting RAID arrays. [ 4.976185] md: autorun ... [ 4.976448] md: ... autorun DONE. [ 5.112767] EXT4-fs (vda): mounted filesystem 90a1ca15-2680-494b-b3da-7eb4076fedb2 r/w with ordered data mode. Quota mode: disabled. [ 5.114829] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.119902] devtmpfs: mounted [ 5.170103] Freeing unused kernel image (initmem) memory: 464K [ 5.170734] Kernel memory protection not selected by kernel config. [ 5.171549] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 9.928162] udevd[97]: starting version 3.2.14 [ 10.305209] udevd[98]: starting eudev-3.2.14 [ 15.254390] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 15.255383] clcd-pl11x: probe of 10120000.display failed with error -2 [ 15.257704] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 15.260283] amba 10100000.smc: deferred probe pending [ 15.260833] amba 10110000.mpmc: deferred probe pending [ 15.261119] amba 101e0000.sctl: deferred probe pending [ 15.261397] amba 101e1000.watchdog: deferred probe pending [ 15.261684] amba 101f0000.sci: deferred probe pending [ 15.262299] amba 101f4000.spi: deferred probe pending [ 15.262908] amba 1000a000.sci: deferred probe pending [ 15.333757] amba 10120000.display: deferred probe pending [ 38.344837] EXT4-fs (vda): re-mounted 90a1ca15-2680-494b-b3da-7eb4076fedb2 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.20-yocto-standard #1 PREEMPT Sun Mar 3 16:28:22 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 7 23:06:22 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-d9b7f4b524322dde847166de1ae6bf779888b641 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-dHphWk2iia,guid=ea8ef2fcbaa8fc312c15932165ea488e Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[535]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=516 comm="connman-applet") dbus-daemon[535]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry