[    0.000000] Linux version 6.5.13-yocto-standard (oe-user@oe-host) (x86_64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.41.0.20231213) #1 SMP PREEMPT_DYNAMIC Thu Dec 14 16:41:11 UTC 2023
[    0.000000] Command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffd7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffd8000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000001] kvm-clock: using sched offset of 385019021 cycles
[    0.000003] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000005] tsc: Detected 2599.988 MHz processor
[    0.001738] last_pfn = 0x1ffd8 max_arch_pfn = 0x400000000
[    0.001761] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs
[    0.001764] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006274] found SMP MP-table at [mem 0x000f5b60-0x000f5b6f]
[    0.006394] ACPI: Early table checksum verification disabled
[    0.006396] ACPI: RSDP 0x00000000000F5980 000014 (v00 BOCHS )
[    0.006405] ACPI: RSDT 0x000000001FFE2437 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006411] ACPI: FACP 0x000000001FFE2217 0000F4 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006417] ACPI: DSDT 0x000000001FFE0040 0021D7 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006421] ACPI: FACS 0x000000001FFE0000 000040
[    0.006425] ACPI: APIC 0x000000001FFE230B 000090 (v03 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006429] ACPI: HPET 0x000000001FFE239B 000038 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006433] ACPI: MCFG 0x000000001FFE23D3 00003C (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006437] ACPI: WAET 0x000000001FFE240F 000028 (v01 BOCHS  BXPC     00000001 BXPC 00000001)
[    0.006440] ACPI: Reserving FACP table memory at [mem 0x1ffe2217-0x1ffe230a]
[    0.006442] ACPI: Reserving DSDT table memory at [mem 0x1ffe0040-0x1ffe2216]
[    0.006443] ACPI: Reserving FACS table memory at [mem 0x1ffe0000-0x1ffe003f]
[    0.006445] ACPI: Reserving APIC table memory at [mem 0x1ffe230b-0x1ffe239a]
[    0.006446] ACPI: Reserving HPET table memory at [mem 0x1ffe239b-0x1ffe23d2]
[    0.006447] ACPI: Reserving MCFG table memory at [mem 0x1ffe23d3-0x1ffe240e]
[    0.006448] ACPI: Reserving WAET table memory at [mem 0x1ffe240f-0x1ffe2436]
[    0.006487] Zone ranges:
[    0.006488]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006491]   DMA32    [mem 0x0000000001000000-0x000000001ffd7fff]
[    0.006493]   Normal   empty
[    0.006494] Movable zone start for each node
[    0.006495] Early memory node ranges
[    0.006496]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.006497]   node   0: [mem 0x0000000000100000-0x000000001ffd7fff]
[    0.006499] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffd7fff]
[    0.006879] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.006899] On node 0, zone DMA: 97 pages in unavailable ranges
[    0.008672] On node 0, zone DMA32: 40 pages in unavailable ranges
[    0.009103] ACPI: PM-Timer IO Port: 0x608
[    0.009111] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.009136] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.009139] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.009141] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.009142] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.009144] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.009146] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.009150] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.009151] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.009154] TSC deadline timer available
[    0.009155] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.009170] [mem 0x20000000-0xafffffff] available for PCI devices
[    0.009172] Booting paravirtualized kernel on KVM
[    0.009173] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.009178] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.009779] percpu: Embedded 56 pages/cpu s189928 r8192 d31256 u524288
[    0.009811] Kernel command line: root=/dev/vda rw  ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 oprofile.timer=1 tsc=reliable no_timer_check rcupdate.rcu_expedited=1 swiotlb=0  printk.time=1
[    0.009884] random: crng init done
[    0.009949] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.009985] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.010049] Built 1 zonelists, mobility grouping on.  Total pages: 128728
[    0.010565] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.011716] Memory: 478032K/523736K available (18432K kernel code, 2307K rwdata, 5184K rodata, 3368K init, 2340K bss, 45444K reserved, 0K cma-reserved)
[    0.011771] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.011778] Kernel/User page tables isolation: enabled
[    0.011802] ftrace: allocating 50662 entries in 198 pages
[    0.021366] ftrace: allocated 198 pages with 4 groups
[    0.021400] Dynamic Preempt: full
[    0.021800] rcu: Preemptible hierarchical RCU implementation.
[    0.021801] rcu: 	RCU event tracing is enabled.
[    0.021802] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.021804] 	All grace periods are expedited (rcu_expedited).
[    0.021804] 	Trampoline variant of Tasks RCU enabled.
[    0.021805] 	Rude variant of Tasks RCU enabled.
[    0.021805] 	Tracing variant of Tasks RCU enabled.
[    0.021806] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.021807] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.026548] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.026744] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.026830] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
[    0.031789] Console: colour VGA+ 80x25
[    0.031825] printk: console [ttyS0] enabled
[    0.112417] ACPI: Core revision 20230331
[    0.113036] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.114146] APIC: Switch to symmetric I/O mode setup
[    0.114750] x2apic enabled
[    0.115195] Switched APIC routing to physical x2apic.
[    0.116296] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.117035] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x257a30e14db, max_idle_ns: 440795278188 ns
[    0.118129] Calibrating delay loop (skipped) preset value.. 5199.97 BogoMIPS (lpj=2599988)
[    0.119211] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.120142] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.121132] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.122133] Spectre V2 : Mitigation: Retpolines
[    0.123131] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.124131] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.124863] Speculative Store Bypass: Vulnerable
[    0.125131] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.125845] MMIO Stale Data: Unknown: No mitigations
[    0.126131] SRBDS: Unknown: Dependent on hypervisor status
[    0.127138] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.127895] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.128131] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.129131] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.129808] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.149209] Freeing SMP alternatives memory: 52K
[    0.149745] pid_max: default: 32768 minimum: 301
[    0.150149] LSM: initializing lsm=capability,landlock,integrity
[    0.150769] landlock: Up and running.
[    0.151157] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.152132] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.153368] smpboot: CPU0: Intel Xeon E3-12xx v2 (Ivy Bridge) (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.154271] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.155083] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.155149] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[    0.155953] Performance Events: unsupported p6 CPU model 58 no PMU driver, software events only.
[    0.156145] signal: max sigframe size: 1776
[    0.156653] rcu: Hierarchical SRCU implementation.
[    0.157132] rcu: 	Max phase no-delay instances is 400.
[    0.157909] smp: Bringing up secondary CPUs ...
[    0.158217] smpboot: x86: Booting SMP configuration:
[    0.158763] .... node  #0, CPUs:      #1 #2 #3
[    0.159162] smp: Brought up 1 node, 4 CPUs
[    0.160578] smpboot: Max logical packages: 1
[    0.161049] smpboot: Total of 4 processors activated (20799.90 BogoMIPS)
[    0.161401] devtmpfs: initialized
[    0.161639] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162135] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.162917] pinctrl core: initialized pinctrl subsystem
[    0.164318] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.165140] thermal_sys: Registered thermal governor 'step_wise'
[    0.165142] thermal_sys: Registered thermal governor 'user_space'
[    0.165838] cpuidle: using governor menu
[    0.166656] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000)
[    0.167133] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved as E820 entry
[    0.167938] PCI: Using configuration type 1 for base access
[    0.168278] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.186132] raid6: sse2x4   gen() 17717 MB/s
[    0.203131] raid6: sse2x2   gen() 16952 MB/s
[    0.220131] raid6: sse2x1   gen() 13157 MB/s
[    0.220593] raid6: using algorithm sse2x4 gen() 17717 MB/s
[    0.238131] raid6: .... xor() 7556 MB/s, rmw enabled
[    0.238732] raid6: using ssse3x2 recovery algorithm
[    0.239170] ACPI: Added _OSI(Module Device)
[    0.239650] ACPI: Added _OSI(Processor Device)
[    0.240099] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.240133] ACPI: Added _OSI(Processor Aggregator Device)
[    0.241402] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.243187] ACPI: Interpreter enabled
[    0.243616] ACPI: PM: (supports S0 S3 S5)
[    0.244048] ACPI: Using IOAPIC for interrupt routing
[    0.244151] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.245108] PCI: Using E820 reservations for host bridge windows
[    0.245192] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.247080] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.247136] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.248133] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    0.248874] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[    0.249183] PCI host bridge to bus 0000:00
[    0.249598] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.250133] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.250826] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.251132] pci_bus 0000:00: root bus resource [mem 0x20000000-0xafffffff window]
[    0.251910] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    0.252132] pci_bus 0000:00: root bus resource [mem 0x100000000-0x8ffffffff window]
[    0.252988] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.253170] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.254080] pci 0000:00:01.0: [1af4:1000] type 00 class 0x020000
[    0.255132] pci 0000:00:01.0: reg 0x10: [io  0xc0c0-0xc0df]
[    0.257693] pci 0000:00:01.0: reg 0x14: [mem 0xfebd0000-0xfebd0fff]
[    0.261133] pci 0000:00:01.0: reg 0x20: [mem 0xfe800000-0xfe803fff 64bit pref]
[    0.262824] pci 0000:00:01.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.263518] pci 0000:00:02.0: [1af4:1005] type 00 class 0x00ff00
[    0.265133] pci 0000:00:02.0: reg 0x10: [io  0xc0e0-0xc0ff]
[    0.267048] pci 0000:00:02.0: reg 0x14: [mem 0xfebd1000-0xfebd1fff]
[    0.269132] pci 0000:00:02.0: reg 0x20: [mem 0xfe804000-0xfe807fff 64bit pref]
[    0.270867] pci 0000:00:03.0: [1af4:1050] type 00 class 0x030000
[    0.274140] pci 0000:00:03.0: reg 0x10: [mem 0xfe000000-0xfe7fffff pref]
[    0.278138] pci 0000:00:03.0: reg 0x18: [mem 0xfe808000-0xfe80bfff 64bit pref]
[    0.280138] pci 0000:00:03.0: reg 0x20: [mem 0xfebd2000-0xfebd2fff]
[    0.285148] pci 0000:00:03.0: reg 0x30: [mem 0xfebc0000-0xfebcffff pref]
[    0.286172] pci 0000:00:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.287574] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.290135] pci 0000:00:04.0: reg 0x10: [io  0xc000-0xc07f]
[    0.293134] pci 0000:00:04.0: reg 0x14: [mem 0xfebd3000-0xfebd3fff]
[    0.296649] pci 0000:00:04.0: reg 0x20: [mem 0xfe80c000-0xfe80ffff 64bit pref]
[    0.300554] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.302541] pci 0000:00:1d.0: reg 0x20: [io  0xc100-0xc11f]
[    0.303822] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.305570] pci 0000:00:1d.1: reg 0x20: [io  0xc120-0xc13f]
[    0.307476] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.309511] pci 0000:00:1d.2: reg 0x20: [io  0xc140-0xc15f]
[    0.310884] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.311494] pci 0000:00:1d.7: reg 0x10: [mem 0xfebd4000-0xfebd4fff]
[    0.313826] pci 0000:00:1f.0: [8086:2918] type 00 class 0x060100
[    0.314338] pci 0000:00:1f.0: quirk: [io  0x0600-0x067f] claimed by ICH6 ACPI/GPIO/TCO
[    0.315289] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[    0.318412] pci 0000:00:1f.2: reg 0x20: [io  0xc160-0xc17f]
[    0.319560] pci 0000:00:1f.2: reg 0x24: [mem 0xfebd5000-0xfebd5fff]
[    0.321281] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.324132] pci 0000:00:1f.3: reg 0x20: [io  0x0700-0x073f]
[    0.326182] ACPI: PCI: Interrupt link LNKA configured for IRQ 10
[    0.326945] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.327189] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
[    0.327888] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.328183] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.328920] ACPI: PCI: Interrupt link LNKF configured for IRQ 10
[    0.329185] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.329885] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.330156] ACPI: PCI: Interrupt link GSIA configured for IRQ 16
[    0.330798] ACPI: PCI: Interrupt link GSIB configured for IRQ 17
[    0.331140] ACPI: PCI: Interrupt link GSIC configured for IRQ 18
[    0.331842] ACPI: PCI: Interrupt link GSID configured for IRQ 19
[    0.332140] ACPI: PCI: Interrupt link GSIE configured for IRQ 20
[    0.332799] ACPI: PCI: Interrupt link GSIF configured for IRQ 21
[    0.333142] ACPI: PCI: Interrupt link GSIG configured for IRQ 22
[    0.333790] ACPI: PCI: Interrupt link GSIH configured for IRQ 23
[    0.334442] iommu: Default domain type: Translated
[    0.335032] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.335231] SCSI subsystem initialized
[    0.335673] ACPI: bus type USB registered
[    0.336144] usbcore: registered new interface driver usbfs
[    0.336736] usbcore: registered new interface driver hub
[    0.337139] usbcore: registered new device driver usb
[    0.337732] pps_core: LinuxPPS API ver. 1 registered
[    0.338132] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.339100] PTP clock support registered
[    0.339354] Bluetooth: Core ver 2.22
[    0.339783] NET: Registered PF_BLUETOOTH protocol family
[    0.340133] Bluetooth: HCI device and connection manager initialized
[    0.340906] Bluetooth: HCI socket layer initialized
[    0.341133] Bluetooth: L2CAP socket layer initialized
[    0.341653] Bluetooth: SCO socket layer initialized
[    0.342156] PCI: Using ACPI for IRQ routing
[    0.371954] pci 0000:00:03.0: vgaarb: setting as boot VGA device
[    0.371954] pci 0000:00:03.0: vgaarb: bridge control possible
[    0.372129] pci 0000:00:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.372133] vgaarb: loaded
[    0.372503] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.373022] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.376229] clocksource: Switched to clocksource kvm-clock
[    0.377699] pnp: PnP ACPI init
[    0.378202] system 00:04: [mem 0xb0000000-0xbfffffff window] has been reserved
[    0.379179] pnp: PnP ACPI: found 5 devices
[    0.386298] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.387340] NET: Registered PF_INET protocol family
[    0.387916] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.388920] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.389873] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.390680] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.391463] TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.392197] TCP: Hash tables configured (established 4096 bind 4096)
[    0.392962] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.393604] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.394304] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.395108] RPC: Registered named UNIX socket transport module.
[    0.395796] RPC: Registered udp transport module.
[    0.396287] RPC: Registered tcp transport module.
[    0.396787] RPC: Registered tcp-with-tls transport module.
[    0.397346] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.397976] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.398580] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.399172] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.399833] pci_bus 0000:00: resource 7 [mem 0x20000000-0xafffffff window]
[    0.400499] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xfebfffff window]
[    0.401287] pci_bus 0000:00: resource 9 [mem 0x100000000-0x8ffffffff window]
[    0.402222] ACPI: \_SB_.GSIA: Enabled at IRQ 16
[    0.403277] ACPI: \_SB_.GSIB: Enabled at IRQ 17
[    0.404287] ACPI: \_SB_.GSIC: Enabled at IRQ 18
[    0.405318] ACPI: \_SB_.GSID: Enabled at IRQ 19
[    0.406317] PCI: CLS 0 bytes, default 64
[    0.407834] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    0.410487] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a30e14db, max_idle_ns: 440795278188 ns
[    0.412301] Initialise system trusted keyrings
[    0.412972] workingset: timestamp_bits=46 max_order=17 bucket_order=0
[    0.414386] NFS: Registering the id_resolver key type
[    0.414972] Key type id_resolver registered
[    0.415439] Key type id_legacy registered
[    0.416200] Key type cifs.idmap registered
[    0.427881] xor: automatically using best checksumming function   avx       
[    0.428654] Key type asymmetric registered
[    0.429074] Asymmetric key parser 'x509' registered
[    0.429585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.430385] io scheduler mq-deadline registered
[    0.430856] io scheduler kyber registered
[    0.431301] io scheduler bfq registered
[    0.431976] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.433502] ACPI: button: Power Button [PWRF]
[    0.434441] ACPI: \_SB_.GSIF: Enabled at IRQ 21
[    0.435730] ACPI: \_SB_.GSIG: Enabled at IRQ 22
[    0.437765] ACPI: \_SB_.GSIH: Enabled at IRQ 23
[    0.440947] ACPI: \_SB_.GSIE: Enabled at IRQ 20
[    0.447933] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.449553] 00:01: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.451370] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.457425] Linux agpgart interface v0.103
[    0.458303] ACPI: bus type drm_connector registered
[    0.459310] [drm] pci: virtio-vga detected at 0000:00:03.0
[    0.460339] virtio-pci 0000:00:03.0: vgaarb: deactivate vga console
[    0.463734] Console: switching to colour dummy device 80x25
[    0.464942] [drm] features: -virgl +edid -resource_blob -host_visible
[    0.464945] [drm] features: -context_init
[    0.468537] [drm] number of scanouts: 1
[    0.468965] [drm] number of cap sets: 0
[    0.469561] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:03.0 on minor 0
[    0.472718] fbcon: virtio_gpudrmfb (fb0) is primary device
[    0.474838] Console: switching to colour frame buffer device 160x50
[    0.494274] virtio-pci 0000:00:03.0: [drm] fb0: virtio_gpudrmfb frame buffer device
[    0.496912] brd: module loaded
[    0.500254] loop: module loaded
[    0.500770] virtio_blk virtio3: 4/0/0 default/read/poll queues
[    0.502272] virtio_blk virtio3: [vda] 793326 512-byte logical blocks (406 MB/387 MiB)
[    0.525978] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode
[    0.526820] ahci 0000:00:1f.2: flags: 64bit ncq only 
[    0.528070] scsi host0: ahci
[    0.528690] scsi host1: ahci
[    0.529250] scsi host2: ahci
[    0.529788] scsi host3: ahci
[    0.530284] scsi host4: ahci
[    0.530752] scsi host5: ahci
[    0.531114] ata1: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5100 irq 34
[    0.531856] ata2: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5180 irq 34
[    0.532585] ata3: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5200 irq 34
[    0.533302] ata4: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5280 irq 34
[    0.533989] ata5: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5300 irq 34
[    0.534696] ata6: SATA max UDMA/133 abar m4096@0xfebd5000 port 0xfebd5380 irq 34
[    0.552706] e100: Intel(R) PRO/100 Network Driver
[    0.553284] e100: Copyright(c) 1999-2006 Intel Corporation
[    0.553833] e1000: Intel(R) PRO/1000 Network Driver
[    0.554303] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    0.554853] e1000e: Intel(R) PRO/1000 Network Driver
[    0.555365] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.555959] igb: Intel(R) Gigabit Ethernet Network Driver
[    0.556477] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.558167] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.558751] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    0.559550] uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000c100
[    0.560341] hub 1-0:1.0: USB hub found
[    0.560829] hub 1-0:1.0: 2 ports detected
[    0.561499] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.562340] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.563231] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfebd4000
[    0.570512] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.571348] hub 2-0:1.0: USB hub found
[    0.571776] hub 2-0:1.0: 6 ports detected
[    0.593523] hub 1-0:1.0: USB hub found
[    0.593951] hub 1-0:1.0: 2 ports detected
[    0.594453] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.595699] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.597614] uhci_hcd 0000:00:1d.1: irq 17, io port 0x0000c120
[    0.599314] hub 3-0:1.0: USB hub found
[    0.600249] hub 3-0:1.0: 2 ports detected
[    0.602511] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.603918] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.605389] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c140
[    0.606175] hub 4-0:1.0: USB hub found
[    0.606611] hub 4-0:1.0: 2 ports detected
[    0.607147] usbcore: registered new interface driver usb-storage
[    0.607782] usbcore: registered new interface driver usbserial_generic
[    0.608481] usbserial: USB Serial support registered for generic
[    0.609191] usbcore: registered new interface driver ftdi_sio
[    0.609835] usbserial: USB Serial support registered for FTDI USB Serial Device
[    0.610676] usbcore: registered new interface driver pl2303
[    0.611275] usbserial: USB Serial support registered for pl2303
[    0.611964] i8042: PNP: No PS/2 controller found.
[    0.612580] mousedev: PS/2 mouse device common for all mice
[    0.613300] rtc_cmos 00:03: RTC can wake from S4
[    0.614134] rtc_cmos 00:03: registered as rtc0
[    0.614694] rtc_cmos 00:03: setting system clock to 2024-03-12T03:40:28 UTC (1710214828)
[    0.615568] rtc_cmos 00:03: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[    0.616644] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    0.617059] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com
[    0.617367] i2c i2c-0: 1/1 memory slots populated (from DMI)
[    0.618395] intel_pstate: CPU model not supported
[    0.618994] i2c i2c-0: Memory type 0x07 not supported yet, not instantiating SPD
[    0.619491] sdhci: Secure Digital Host Controller Interface driver
[    0.620991] sdhci: Copyright(c) Pierre Ossman
[    0.621446] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.622145] usbcore: registered new interface driver usbhid
[    0.622694] usbhid: USB HID core driver
[    0.623160] u32 classifier
[    0.623459]     input device check on
[    0.623862]     Actions configured
[    0.624270] NET: Registered PF_INET6 protocol family
[    0.625240] Segment Routing with IPv6
[    0.625691] In-situ OAM (IOAM) with IPv6
[    0.626162] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    0.626861] NET: Registered PF_PACKET protocol family
[    0.627418] Bridge firewalling registered
[    0.627855] Key type dns_resolver registered
[    0.628391] NET: Registered PF_VSOCK protocol family
[    0.629359] IPI shorthand broadcast: enabled
[    0.631067] sched_clock: Marking stable (542024467, 88378559)->(742572659, -112169633)
[    0.632013] registered taskstats version 1
[    0.632484] Loading compiled-in X.509 certificates
[    0.634171] Key type .fscrypt registered
[    0.634700] Key type fscrypt-provisioning registered
[    0.635477] Btrfs loaded, zoned=no, fsverity=no
[    0.636339] Key type encrypted registered
[    0.636945] printk: console [netcon0] enabled
[    0.637447] netconsole: network logging started
[    0.812425] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.856643] ata6: SATA link down (SStatus 0 SControl 300)
[    0.857322] ata1: SATA link down (SStatus 0 SControl 300)
[    0.857992] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.858848] ata2: SATA link down (SStatus 0 SControl 300)
[    0.859544] ata4: SATA link down (SStatus 0 SControl 300)
[    0.860180] ata5: SATA link down (SStatus 0 SControl 300)
[    0.860803] ata3.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[    0.861424] ata3.00: applying bridge limits
[    0.861962] ata3.00: configured for UDMA/100
[    0.869964] scsi 2:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
[    0.886745] sr 2:0:0:0: [sr0] scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
[    0.887466] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.906420] IP-Config: Complete:
[    0.906787]      device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3
[    0.907768]      host=192.168.7.4, domain=, nis-domain=(none)
[    0.908334]      bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
[    0.908336]      nameserver0=8.8.8.8
[    0.909503] clk: Disabling unused clocks
[    0.910084] md: Waiting for all devices to be available before autodetect
[    0.910617] md: If you don't use raid, use raid=noautodetect
[    0.912910] md: Autodetecting RAID arrays.
[    0.913229] md: autorun ...
[    0.913447] md: ... autorun DONE.
[    0.917949] EXT4-fs (vda): mounted filesystem e33a8722-97c2-42c9-bec7-907ce277d11a r/w with ordered data mode. Quota mode: disabled.
[    0.919015] VFS: Mounted root (ext4 filesystem) on device 253:0.
[    0.919566] devtmpfs: mounted
[    0.920972] Freeing unused kernel image (initmem) memory: 3368K
[    0.927421] Write protecting the kernel read-only data: 24576k
[    0.928405] Freeing unused kernel image (rodata/data gap) memory: 960K
[    0.929067] Run /sbin/init as init process
INIT: version 3.04 booting
[    0.945202] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/0003:0627:0001.0001/input/input1
[    0.945263] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:1d.7-1/input0
warning: FBIOPUT_VSCREENINFO failed, double buffering disabled
Starting udev
[    0.991476] udevd[137]: starting version 3.2.12
[    0.996878] udevd[138]: starting eudev-3.2.12
[    1.062431] usb 2-2: new high-speed USB device number 3 using ehci-pci
[    1.195857] input: QEMU QEMU USB Keyboard as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2:1.0/0003:0627:0001.0002/input/input2
[    1.248587] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:1d.7-2/input0
[    1.313349] EXT4-fs (vda): re-mounted e33a8722-97c2-42c9-bec7-907ce277d11a r/w. Quota mode: disabled.
ALSA: Restoring mixer settings...
INIT: Entering runlevel: 5
Configuring network interfaces... ip: RTNETLINK answers: File exists
Starting system message bus: dbus.
00:00:00.000 [1;34m [c/debug/seatd/0.8.0-r0/seatd/seat.c:39] Created VT-bound seat seat0[0m
00:00:00.000 [1;34m [c/debug/seatd/0.8.0-r0/seatd/seatd.c:194] seatd started[0m
Starting Dropbear SSH server: Generating 2048 bit rsa key, this may take a while...
00:00:00.125 [1;34m [c/debug/seatd/0.8.0-r0/seatd/server.c:145] New client connected (pid: 340, uid: 1000, gid: 1000)[0m
00:00:00.125 [1;34m [c/debug/seatd/0.8.0-r0/seatd/seat.c:170] Added client 2 to seat0[0m
00:00:00.126 [1;34m [c/debug/seatd/0.8.0-r0/seatd/seat.c:480] Opened client 2 on seat0[0m
[    1.725312] weston[340]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
could not load cursor 'dnd-move'
could not load cursor 'dnd-copy'
could not load cursor 'dnd-none'
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCST3wi/ebM/Bn1664S2DqqyaGe3/LkwFl2WrR4V3Poku8JJ6ZzsvBKhk4o2CETncovFN1JAvxnaF7h8VAeJYF/Wj7ll8y0BMdGvuPczw94vE4fmHT/TiXZfUdennpwZJsE9qlHuDpd+XccTe2VT/SJb30IupQ7fSsE+SmRFq+ns1KEuA0tq3xPCwTEFt9NY23MyYU5HgDBkgZ46dHwRbjKA9X3Ip4ZbgdF2uoVCAezK1lN4rQUPJwTz0nHSOw7EDh9HETl60GQV1LlWIk7NXTOKhw1aBgD56lm0Wbw3rOs1BmX7X7HyxrXfeUsV05YzGpve3ZaXxisfFt/lRPoj/eR root@qemux86-64
Fingerprint: SHA256:ddJnTsdHX2LFKF1LbdulKNRo5o+47MQRl6m4a6JNMj8
dropbear.
Starting rpcbind daemon...done.
Starting bluetooth: bluetoothd.
Starting syslogd/klogd: done
 * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
[    1.970305] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.970849] Bluetooth: BNEP filters: protocol multicast
[    1.971324] Bluetooth: BNEP socket layer initialized
   ...done.
Starting Telephony daemon

Poky (Yocto Project Reference Distro) 4.3.3 qemux86-64 /dev/ttyS0

qemux86-64 login: 00:01:15.026 [1;34m [c/debug/seatd/0.8.0-r0/seatd/server.c:145] New client connected (pid: 5942, uid: 0, gid: 0)[0m
00:01:15.028 [1;31m [c/debug/seatd/0.8.0-r0/seatd/seat.c:135] Could not add client: seat is VT-bound and has an active client[0m
00:01:15.028 [1;31m [c/debug/seatd/0.8.0-r0/seatd/client.c:177] Could not add client to target seat: Device or resource busy[0m
