[ 0.000000] Linux version 6.6.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Sun Mar 3 16:28:33 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239296K/262140K available (14188K kernel code, 1467K rwdata, 2736K rodata, 416K init, 394K bss, 22844K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 319.83 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11951587837 ns [ 0.000245] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13428750332ns [ 0.014577] Console: colour dummy device 80x25 [ 0.015662] printk: console [tty0] enabled [ 0.016579] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.20-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Sun Mar 3 16:28:33 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239296K/262140K available (14188K kernel code, 1467K rwdata, 2736K rodata, 416K init, 394K bss, 22844K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 319.83 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11951587837 ns [ 0.000245] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13428750332ns [ 0.014577] Console: colour dummy device 80x25 [ 0.015662] printk: console [tty0] enabled [ 0.016579] printk: bootconsole [uart8250] disabled [ 0.019254] Calibrating delay loop... 978.94 BogoMIPS (lpj=4894720) [ 0.051905] pid_max: default: 32768 minimum: 301 [ 0.053712] LSM: initializing lsm=capability,landlock,integrity [ 0.054412] landlock: Up and running. [ 0.058671] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.058876] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.105085] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.107116] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.107734] Performance counters: No available PMU. [ 0.109090] rcu: Hierarchical SRCU implementation. [ 0.109172] rcu: Max phase no-delay instances is 1000. [ 0.117844] smp: Bringing up secondary CPUs ... [ 0.118215] smp: Brought up 1 node, 1 CPU [ 0.133116] devtmpfs: initialized [ 0.141783] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.142051] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.152447] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.536314] raid6: int32x8 gen() 260 MB/s [ 0.890176] raid6: int32x4 gen() 624 MB/s [ 1.236023] raid6: int32x2 gen() 690 MB/s [ 1.421133] raid6: int32x1 gen() 535 MB/s [ 1.421287] raid6: using algorithm int32x2 gen() 690 MB/s [ 1.590148] raid6: .... xor() 406 MB/s, rmw enabled [ 1.590343] raid6: using intx1 recovery algorithm [ 1.593938] SCSI subsystem initialized [ 1.594681] usbcore: registered new interface driver usbfs [ 1.595064] usbcore: registered new interface driver hub [ 1.595332] usbcore: registered new device driver usb [ 1.595833] pps_core: LinuxPPS API ver. 1 registered [ 1.595903] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.596096] PTP clock support registered [ 1.616465] PCI host bridge to bus 0000:00 [ 1.616970] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 1.617598] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 1.617794] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 1.619631] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 1.620614] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 1.620807] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 1.620985] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 1.621100] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 1.621211] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 1.621320] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 1.624275] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 1.625239] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 1.625615] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 1.625790] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 1.625882] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 1.625991] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 1.626082] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 1.626560] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 1.626747] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 1.627600] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 1.628238] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 1.628410] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 1.629056] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 1.629196] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.629371] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.629488] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 1.630116] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 1.630265] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 1.630532] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.630708] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 1.631219] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 1.631349] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 1.631478] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.631980] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 1.632120] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 1.632249] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.633117] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 1.634729] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 1.635105] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 1.635259] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 1.635380] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 1.635570] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 1.635691] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 1.635836] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 1.635973] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 1.636076] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 1.636162] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 1.636251] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 1.636339] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 1.638672] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 1.638831] pci 0000:00:12.0: vgaarb: bridge control possible [ 1.638954] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 1.639103] vgaarb: loaded [ 1.641687] clocksource: Switched to clocksource MIPS [ 1.676306] NET: Registered PF_INET protocol family [ 1.677794] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 1.686766] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 1.687004] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.687176] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 1.687443] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 1.687674] TCP: Hash tables configured (established 2048 bind 2048) [ 1.689129] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.689469] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 1.691490] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.694871] RPC: Registered named UNIX socket transport module. [ 1.694993] RPC: Registered udp transport module. [ 1.695056] RPC: Registered tcp transport module. [ 1.695122] RPC: Registered tcp-with-tls transport module. [ 1.695181] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.696077] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 1.697183] PCI: CLS 0 bytes, default 16 [ 1.708230] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 1.712688] NFS: Registering the id_resolver key type [ 1.714223] Key type id_resolver registered [ 1.714328] Key type id_legacy registered [ 1.716777] Key type cifs.idmap registered [ 2.104159] xor: measuring software checksum speed [ 2.114597] 8regs : 987 MB/sec [ 2.125320] 8regs_prefetch : 947 MB/sec [ 2.135525] 32regs : 988 MB/sec [ 2.153298] 32regs_prefetch : 564 MB/sec [ 2.153443] xor: using function: 32regs (988 MB/sec) [ 2.153992] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.154235] io scheduler mq-deadline registered [ 2.154365] io scheduler kyber registered [ 2.160875] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.164600] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.166027] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.168696] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.177619] printk: console [ttyS0] disabled [ 2.203299] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.203490] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.209089] printk: console [ttyS0] enabled [ 2.305253] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.305967] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 2.306673] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 2.317126] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 2.319582] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 2.321220] [drm] Found bochs VGA, ID 0xb0c5. [ 2.321673] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 2.326655] [drm] Found EDID data blob. [ 2.335103] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 2.420900] Console: switching to colour frame buffer device 160x50 [ 2.442309] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.485710] brd: module loaded [ 2.487304] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 2.494178] virtio_blk virtio2: [vda] 1139968 512-byte logical blocks (584 MB/557 MiB) [ 2.522451] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 2.524466] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 2.526114] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 2.538865] hub 1-0:1.0: USB hub found [ 2.540228] hub 1-0:1.0: 2 ports detected [ 2.548791] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.550364] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.556050] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.560160] usbcore: registered new interface driver usbhid [ 2.560769] usbhid: USB HID core driver [ 2.563222] u32 classifier [ 2.564399] input device check on [ 2.564987] Actions configured [ 2.569636] NET: Registered PF_INET6 protocol family [ 2.580145] Segment Routing with IPv6 [ 2.581791] In-situ OAM (IOAM) with IPv6 [ 2.583723] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.587963] NET: Registered PF_PACKET protocol family [ 2.589323] Bridge firewalling registered [ 2.591224] Key type dns_resolver registered [ 2.592395] NET: Registered PF_VSOCK protocol family [ 2.626663] registered taskstats version 1 [ 2.658358] Key type .fscrypt registered [ 2.674091] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.682987] Key type fscrypt-provisioning registered [ 2.713960] Btrfs loaded, zoned=no, fsverity=no [ 2.755024] Key type encrypted registered [ 2.767421] printk: console [netcon0] enabled [ 2.772424] netconsole: network logging started [ 2.861647] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 3.153836] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 3.169936] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 3.365839] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 3.482742] IP-Config: Complete: [ 3.506883] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 3.548572] host=192.168.7.2, domain=, nis-domain=(none) [ 3.594367] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.594535] nameserver0=8.8.8.8 [ 3.658672] clk: Disabling unused clocks [ 3.692570] md: Waiting for all devices to be available before autodetect [ 3.708905] md: If you don't use raid, use raid=noautodetect [ 3.739956] md: Autodetecting RAID arrays. [ 3.765755] md: autorun ... [ 3.780821] md: ... autorun DONE. [ 3.886302] EXT4-fs (vda): mounted filesystem 6cf301a7-eb70-456c-8760-adda05d49d87 r/w with ordered data mode. Quota mode: disabled. [ 3.904636] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.920379] devtmpfs: mounted [ 4.013889] Freeing unused kernel image (initmem) memory: 416K [ 4.021227] This architecture does not have kernel memory protection. [ 4.027927] Run /sbin/init as init process [ 4.076770] process '/sbin/init.sysvinit' started with executable stack [ 7.049186] udevd[92]: starting version 3.2.14 [ 7.190521] udevd[93]: starting eudev-3.2.14 [ 17.483720] EXT4-fs (vda): re-mounted 6cf301a7-eb70-456c-8760-adda05d49d87 r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5 bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.20-yocto-standard #1 SMP PREEMPT Sun Mar 3 16:28:33 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 12 17:10:15 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: bluetoothd. pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-2f7ccc3f71e0600fc2e5f07c55565e517ac476af qemumips /dev/ttyS0 qemumips login: