START: ptest-runner 2024-03-22T19:55 1..225 ok 1 - Split using Module::Build ok 2 - Split using Module::Build ok 3 - Split using Module::Build::Platform::Unix ok 4 - Split using Module::Build::Platform::Unix ok 5 - Split using Module::Build::Platform::Windows ok 6 - Split using Module::Build::Platform::Windows ok 7 - 'one t'wo th'ree f"o\"ur " "five" ' result all defined ok 8 ok 9 - ' foo bar ' result all defined ok 10 ok 11 - ' D\'oh f{g\'h\"i\]\* ' result all defined ok 12 ok 13 - ' D\$foo ' result all defined ok 14 ok 15 - 'one\\ # two' result all defined ok 16 ok 17 - 'a" "b\c" "d' result all defined ok 18 ok 19 - '"a b\c d"' result all defined ok 20 ok 21 - '"a b"\"c d"' result all defined ok 22 ok 23 - '"a b"\\"c d"' result all defined ok 24 ok 25 - '"a"\"b" "a\"b"' result all defined ok 26 ok 27 - '"a"\\"b" "a\\"b"' result all defined ok 28 ok 29 - '"a"\"b a\"b"' result all defined ok 30 ok 31 - 'a"\"b" "a\"b' result all defined ok 32 ok 33 - 'a"\"b" "a\"b' result all defined ok 34 ok 35 - 'a b' result all defined ok 36 ok 37 - 'a"\"b a\"b' result all defined ok 38 ok 39 - '"a""b" "a"b"' result all defined ok 40 ok 41 - '\"a\"' result all defined ok 42 ok 43 - '"a"" "b"' result all defined ok 44 ok 45 - 'a"b' result all defined ok 46 ok 47 - 'a""b' result all defined ok 48 ok 49 - 'a"""b' result all defined ok 50 ok 51 - 'a""""b' result all defined ok 52 ok 53 - 'a"""""b' result all defined ok 54 ok 55 - 'a""""""b' result all defined ok 56 ok 57 - '"a"b"' result all defined ok 58 ok 59 - '"a""b"' result all defined ok 60 ok 61 - '"a"""b"' result all defined ok 62 ok 63 - '"a""""b"' result all defined ok 64 ok 65 - '"a"""""b"' result all defined ok 66 ok 67 - '"a""""""b"' result all defined ok 68 ok 69 - '' result all defined ok 70 ok 71 - ' ' result all defined ok 72 ok 73 - '""' result all defined ok 74 ok 75 - '" "' result all defined ok 76 ok 77 - '""a' result all defined ok 78 ok 79 - '""a b' result all defined ok 80 ok 81 - 'a""' result all defined ok 82 ok 83 - 'a"" b' result all defined ok 84 ok 85 - '"" a' result all defined ok 86 ok 87 - 'a ""' result all defined ok 88 ok 89 - 'a "" b' result all defined ok 90 ok 91 - 'a " " b' result all defined ok 92 ok 93 - 'a " b " c' result all defined ok 94 ok 95 - 'a "0" c' result all defined ok 96 ok 97 - '"a\b"' result all defined ok 98 ok 99 - '"a\\b"' result all defined ok 100 ok 101 - '"a\\\b"' result all defined ok 102 ok 103 - '"a\\\\b"' result all defined ok 104 ok 105 - '"a\"' result all defined ok 106 ok 107 - '"a\\"' result all defined ok 108 ok 109 - '"a\\\"' result all defined ok 110 ok 111 - '"a\\\\"' result all defined ok 112 ok 113 - '"a\\\""' result all defined ok 114 ok 115 ok 116 ok 117 - perl round trip for {one}{two three}{fo"ur }{five} ok 118 - perl round trip for {foo}{bar} ok 119 - perl round trip for {D'oh}{f{g'h"i]*} ok 120 - perl round trip for {D$foo} ok 121 - perl round trip for {one # two} ok 122 - perl round trip for {a b\c d} ok 123 - perl round trip for {a b\c d} ok 124 - perl round trip for {a b"c}{d} ok 125 - perl round trip for {a b\c d} ok 126 - perl round trip for {a"b a"b} ok 127 - perl round trip for {a\b}{a\b} ok 128 - perl round trip for {a"b}{a"b} ok 129 - perl round trip for {a"b}{a"b} ok 130 - perl round trip for {a"b}{a"b} ok 131 - perl round trip for {a}{b} ok 132 - perl round trip for {a"b a"b} ok 133 - perl round trip for {a"b ab} ok 134 - perl round trip for {"a"} ok 135 - perl round trip for {a"}{b} ok 136 - perl round trip for {ab} ok 137 - perl round trip for {ab} ok 138 - perl round trip for {a"b} ok 139 - perl round trip for {a"b} ok 140 - perl round trip for {a"b} ok 141 - perl round trip for {a""b} ok 142 - perl round trip for {ab} ok 143 - perl round trip for {a"b} ok 144 - perl round trip for {a"b} ok 145 - perl round trip for {a"b} ok 146 - perl round trip for {a""b} ok 147 - perl round trip for {a""b} ok 148 - perl round trip for ok 149 - perl round trip for ok 150 - perl round trip for {} ok 151 - perl round trip for { } ok 152 - perl round trip for {a} ok 153 - perl round trip for {a}{b} ok 154 - perl round trip for {a} ok 155 - perl round trip for {a}{b} ok 156 - perl round trip for {}{a} ok 157 - perl round trip for {a}{} ok 158 - perl round trip for {a}{}{b} ok 159 - perl round trip for {a}{ }{b} ok 160 - perl round trip for {a}{ b }{c} ok 161 - perl round trip for {a}{0}{c} ok 162 - perl round trip for {a\b} ok 163 - perl round trip for {a\\b} ok 164 - perl round trip for {a\\\b} ok 165 - perl round trip for {a\\\\b} ok 166 - perl round trip for {a"} ok 167 - perl round trip for {a\} ok 168 - perl round trip for {a\"} ok 169 - perl round trip for {a\\} ok 170 - perl round trip for {a\"} ok 171 - backticks round trip for {one}{two three}{fo"ur }{five} ok 172 - backticks round trip for {foo}{bar} ok 173 - backticks round trip for {D'oh}{f{g'h"i]*} ok 174 - backticks round trip for {D$foo} ok 175 - backticks round trip for {one # two} ok 176 - backticks round trip for {a b\c d} ok 177 - backticks round trip for {a b\c d} ok 178 - backticks round trip for {a b"c}{d} ok 179 - backticks round trip for {a b\c d} ok 180 - backticks round trip for {a"b a"b} ok 181 - backticks round trip for {a\b}{a\b} ok 182 - backticks round trip for {a"b}{a"b} ok 183 - backticks round trip for {a"b}{a"b} ok 184 - backticks round trip for {a"b}{a"b} ok 185 - backticks round trip for {a}{b} ok 186 - backticks round trip for {a"b a"b} ok 187 - backticks round trip for {a"b ab} ok 188 - backticks round trip for {"a"} ok 189 - backticks round trip for {a"}{b} ok 190 - backticks round trip for {ab} ok 191 - backticks round trip for {ab} ok 192 - backticks round trip for {a"b} ok 193 - backticks round trip for {a"b} ok 194 - backticks round trip for {a"b} ok 195 - backticks round trip for {a""b} ok 196 - backticks round trip for {ab} ok 197 - backticks round trip for {a"b} ok 198 - backticks round trip for {a"b} ok 199 - backticks round trip for {a"b} ok 200 - backticks round trip for {a""b} ok 201 - backticks round trip for {a""b} ok 202 - backticks round trip for ok 203 - backticks round trip for ok 204 - backticks round trip for {} ok 205 - backticks round trip for { } ok 206 - backticks round trip for {a} ok 207 - backticks round trip for {a}{b} ok 208 - backticks round trip for {a} ok 209 - backticks round trip for {a}{b} ok 210 - backticks round trip for {}{a} ok 211 - backticks round trip for {a}{} ok 212 - backticks round trip for {a}{}{b} ok 213 - backticks round trip for {a}{ }{b} ok 214 - backticks round trip for {a}{ b }{c} ok 215 - backticks round trip for {a}{0}{c} ok 216 - backticks round trip for {a\b} ok 217 - backticks round trip for {a\\b} ok 218 - backticks round trip for {a\\\b} ok 219 - backticks round trip for {a\\\\b} ok 220 - backticks round trip for {a"} ok 221 - backticks round trip for {a\} ok 222 - backticks round trip for {a\"} ok 223 - backticks round trip for {a\\} ok 224 - backticks round trip for {a\"} ok 225 PASS: t/ext 1..7 ok 1 t/special_ext.st .. ok All tests successful. Files=1, Tests=2, 5 wallclock secs ( 0.82 usr 0.42 sys + 3.24 cusr 0.94 csys = 5.42 CPU) Result: PASS ok 2 - called once ok 3 ok 4 ok 5 - called again ok 6 ok 7 - called a third time PASS: t/test_type 1..7 ok 1 - MANIFEST.SKIP doesn't exist at start ok 2 - An object of class 'Module::Build' isa 'Module::Build' ok 3 - 'Build manifest_skip' creates MANIFEST.SKIP ok 4 - Saw creation message ok 5 - Running it again warns about pre-existing MANIFEST.SKIP ok 6 - File does not appear modified ok 7 - MANIFEST.SKIP still exists after distclean PASS: t/actions/manifest_skip 1..6 ok 1 - An object of class 'Module::Build' isa 'Module::Build' ok 2 - cpan_client is mocked with perl ok 3 - ran mocked Build installdeps ok 4 - saw File::Spec prereq ok 5 - saw Getopt::Long prereq ok 6 - Build installdeps with bad cpan_client fails PASS: t/actions/installdeps 1..25 ok 1 ok 2 - saw expected output from first test ok 3 - saw expected output from second test ok 4 - we have some test output ok 5 - saw expected output from first test ok 6 - saw expected output from second test ok 7 - expected output from basic.t ok 8 - expected output from basic.t ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 - saw expected output from first test ok 16 - saw expected output from second test ok 17 - we have some test output ok 18 - saw expected output from first test ok 19 - saw expected output from second test ok 20 - expected output from basic.t ok 21 - expected output from basic.t ok 22 ok 23 ok 24 ok 25 PASS: t/test_types ok 1 - Default maniskip written ok 2 - default MANIFEST.SKIP used ok 3 - Module::Build specific entries ok 4 - distribution tarball entry 1..4 PASS: t/write_default_maniskip 1..33 ok 1 - bindoc_dirs ok 2 - libdoc_dirs Building Simple ok 3 ok 4 - docs/myapp3.pl should contain POD ok 5 - Created blib/bindoc/myapp3.pl.1 manpage ok 6 - lib/Simple/AllPod.pod should contain POD ok 7 - Created blib/libdoc/Simple::AllPod.3 manpage ok 8 - docs/myapp4 should contain POD ok 9 - Created blib/bindoc/myapp4.1 manpage ok 10 - lib/Simple.pm should contain POD ok 11 - Created blib/libdoc/Simple.3 manpage ok 12 - lib/Simple/NoPod.pm should not contain POD ok 13 - bin/haspod.pl should contain POD ok 14 - Created blib/bindoc/haspod.pl.1 manpage ok 15 - docs/myapp1.pod should contain POD ok 16 - Created blib/bindoc/myapp1.pod.1 manpage ok 17 - bin/nopod.pl should not contain POD ok 18 - docs/myapp2.pm should contain POD ok 19 - Created blib/bindoc/myapp2.pm.1 manpage Building Simple Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/haspod.pl.1 Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/myapp1.pod.1 Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/myapp2.pm.1 Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/myapp3.pl.1 Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/myapp4.1 Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/lib/perl5/Simple.pm Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/lib/perl5/Simple/NoPod.pm Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/lib/perl5/Simple/AllPod.pod Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man3/Simple.3 Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man3/Simple::AllPod.3 Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/bin/haspod.pl Installing /usr/lib/libmodule-build-perl/ptest/t/install_test587/bin/nopod.pl ok 20 - Created /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/myapp3.pl.1 manpage ok 21 - Created /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man3/Simple::AllPod.3 manpage ok 22 - Created /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/myapp4.1 manpage ok 23 - Created /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man3/Simple.3 manpage ok 24 - Created /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/haspod.pl.1 manpage ok 25 - Created /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/myapp1.pod.1 manpage ok 26 - Created /usr/lib/libmodule-build-perl/ptest/t/install_test587/man/man1/myapp2.pm.1 manpage Cleaning up build files Cleaning up configuration files ok 27 - override libdoc_dirs ok 28 ok 29 ok 30 ok 31 - =item testcover # # [version 0.26] # # Runs the C action using C, generating a # code-coverage report showing which parts of the code were actually # exercised during the tests. # # To pass options to C, set the C<$DEVEL_COVER_OPTIONS> # environment variable: # # DEVEL_COVER_OPTIONS=-ignore,Build ./Build testcover # # ok 32 ok 33 - =item disttest # # [version 0.05] # # Performs the 'distdir' action, then switches into that directory and runs a # C, followed by the 'build' and 'test' actions in that directory. # Use PERL_MB_OPT or F<.modulebuildrc> to set options that should be applied # during subprocesses # # # PASS: t/manifypods 1..26 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 ok 12 ok 13 ok 14 ok 15 ok 16 ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 ok 24 ok 25 ok 26 PASS: t/parents 1..58 ok 1 ok 2 ok 3 ok 4 ok 5 ok 6 ok 7 ok 8 ok 9 ok 10 ok 11 Cleaning up build files Cleaning up configuration files ok 12 ok 13 ok 14 ok 15 ok 16 Cleaning up build files Cleaning up configuration files ok 17 ok 18 ok 19 ok 20 ok 21 ok 22 ok 23 Cleaning up build files Cleaning up configuration files Checking whether your kit is complete... Looks good Checking prerequisites... Looks good Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Simple' version '0.01' ok 24 ok 25 ok 26 ok 27 ok 28 ok 29 - bar ok 30 - bat ok 31 ok 32 ok 33 ok 34 ok 35 ok 36 ok 37 ok 38 ok 39 ok 40 ok 41 ok 42 - dist_author converted to array if simple string ok 43 ok 44 ok 45 ok 46 - Should split shell string into list ok 47 - Should split shell string into list Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Simple' version '0.01' ok 48 ok 49 - Should split shell string into list ok 50 - Should split shell string into list ok 51 ok 52 - Should have include dirs ok 53 ok 54 - Should have string include dir Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Simple' version '0.01' ok 55 ok 56 - Should have include dirs Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Simple' version '0.01' ok 57 ok 58 - Should have single include dir PASS: t/basic 1..2 ok 1 - version_from_file ok 2 - compare: 1.0_01 > 1.0 PASS: t/versions 1..18 ok 1 Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Simple' version '0.01' Created META.yml and META.json ok 2 ok 3 ok 4 ok 5 - Creating Simple.pm Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Simple' version '3.14159265' Creating README using Pod::Text ok 6 - Generating README from .pm ok 7 - Extracting AUTHOR from .pm ok 8 - Extracting abstract from .pm ok 9 - Creating Simple.pm ok 10 - Creating Simple.pod Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Simple' version '3.14159265' Creating README using Pod::Text ok 11 - Generating README from .pod ok 12 - Extracting AUTHOR from .pod ok 13 - Extracting abstract from .pod ok 14 - Creating Simple.pm ok 15 - Creating Simple.pod Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Simple' version '3.14159265' Creating README using Pod::Text ok 16 - Generating README from .pod over .pm ok 17 - Extracting AUTHOR from .pod over .pm ok 18 - Extracting abstract from .pod over .pm PASS: t/metadata2 riscv64-poky-linux-gcc -fstack-protector-strong -O2 '-D_FORTIFY_SOURCE=2' -Wformat -Wformat-security '-Werror=format-security' -I/usr/lib/perl5/5.38.2/riscv64-linux/CORE -fPIC -Wno-unused-function -c -O2 -pipe -g -feliminate-unused-debug-types -D_GNU_SOURCE -D_LARGEFILE_SOURCE '-D_FILE_OFFSET_BITS=64' -D_LARGEFILE_SOURCE '-D_FILE_OFFSET_BITS=64' -fwrapv -fno-strict-aliasing -o /tmp/MB-gS2fSBwc/test.o /tmp/MB-gS2fSBwc/test.c riscv64-poky-linux-gcc -fstack-protector-strong -O2 '-D_FORTIFY_SOURCE=2' -Wformat -Wformat-security '-Werror=format-security' -o /tmp/MB-gS2fSBwc/test /tmp/MB-gS2fSBwc/test.o 1..0 # SKIP HTML support not installed PASS: t/ppm [ 0.000000] Linux version 6.6.22-yocto-standard (oe-user@oe-host) (riscv64-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Tue Mar 19 21:00:58 UTC 2024 [ 0.000000] random: crng init done [ 0.000000] Machine model: riscv-virtio,qemu [ 0.000000] SBI specification v2.0 detected [ 0.000000] SBI implementation ID=0x1 Version=0x10004 [ 0.000000] SBI TIME extension detected [ 0.000000] SBI IPI extension detected [ 0.000000] SBI RFENCE extension detected [ 0.000000] SBI SRST extension detected [ 0.000000] Memory limited to 1024MB [ 0.000000] efi: UEFI not found. [ 0.000000] OF: reserved mem: 0x0000000080000000..0x000000008003ffff (256 KiB) nomap non-reusable mmode_resv1@80000000 [ 0.000000] OF: reserved mem: 0x0000000080040000..0x000000008005ffff (128 KiB) nomap non-reusable mmode_resv0@80040000 [ 0.000000] Zone ranges: [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000080000000-0x000000008005ffff] [ 0.000000] node 0: [mem 0x0000000080060000-0x00000000bfffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000000bfffffff] [ 0.000000] SBI HSM extension detected [ 0.000000] Falling back to deprecated "riscv,isa" [ 0.000000] riscv: base ISA extensions acdfhim [ 0.000000] riscv: ELF capabilities acdfim [ 0.000000] percpu: Embedded 27 pages/cpu s72168 r8192 d30232 u110592 [ 0.000000] pcpu-alloc: s72168 r8192 d30232 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Kernel command line: root=/dev/vda rw mem=1024M ip=192.168.7.28::192.168.7.27:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=hvc0 earlycon=sbi swiotlb=0 printk.time=1 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 1000800K/1048576K available (10258K kernel code, 5805K rwdata, 4096K rodata, 2252K init, 506K bss, 47776K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] riscv-intc: 64 local interrupts mapped [ 0.000000] plic: plic@c000000: mapped 95 interrupts with 4 handlers for 8 contexts. [ 0.000000] riscv: providing IPIs using SBI IPI extension [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns [ 0.000146] sched_clock: 64 bits at 10MHz, resolution 100ns, wraps every 4398046511100ns [ 0.000401] riscv-timer: Timer interrupt in S-mode is available via sstc extension [ 0.014449] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____) [ 0.027283] Console: colour dummy device 80x25 [ 0.030032] Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000) [ 0.030297] pid_max: default: 32768 minimum: 301 [ 0.032829] LSM: initializing lsm=capability,landlock,integrity [ 0.033694] landlock: Up and running. [ 0.037875] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.037996] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.112654] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.114435] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.117623] riscv: ELF compat mode supported [ 0.118042] ASID allocator using 16 bits (65536 entries) [ 0.122172] rcu: Hierarchical SRCU implementation. [ 0.122281] rcu: Max phase no-delay instances is 1000. [ 0.129979] EFI services will not be available. [ 0.138684] smp: Bringing up secondary CPUs ... [ 0.182504] cpu1: Ratio of byte access time to unaligned word access is 7.17, unaligned accesses are fast [ 0.222638] cpu2: Ratio of byte access time to unaligned word access is 7.00, unaligned accesses are fast [ 0.261193] cpu3: Ratio of byte access time to unaligned word access is 7.03, unaligned accesses are fast [ 0.266155] smp: Brought up 1 node, 4 CPUs [ 0.333339] devtmpfs: initialized [ 0.366020] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.366379] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.394440] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.408423] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations [ 0.409422] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.449576] cpu0: Ratio of byte access time to unaligned word access is 7.17, unaligned accesses are fast [ 0.606530] raid6: int64x8 gen() 500 MB/s [ 0.685279] raid6: int64x4 gen() 442 MB/s [ 0.767940] raid6: int64x2 gen() 1162 MB/s [ 0.842572] raid6: int64x1 gen() 929 MB/s [ 0.842694] raid6: using algorithm int64x2 gen() 1162 MB/s [ 0.918009] raid6: .... xor() 768 MB/s, rmw enabled [ 0.918168] raid6: using intx1 recovery algorithm [ 0.924153] SCSI subsystem initialized [ 0.925137] usbcore: registered new interface driver usbfs [ 0.925674] usbcore: registered new interface driver hub [ 0.925992] usbcore: registered new device driver usb [ 0.926803] pps_core: LinuxPPS API ver. 1 registered [ 0.926843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.926987] PTP clock support registered [ 0.959948] vgaarb: loaded [ 0.963426] clocksource: Switched to clocksource riscv_clocksource [ 1.034577] NET: Registered PF_INET protocol family [ 1.037259] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 1.049420] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 1.049576] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 1.049695] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.050096] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 1.051553] TCP: Hash tables configured (established 8192 bind 8192) [ 1.053753] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.054227] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.058227] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 1.066070] RPC: Registered named UNIX socket transport module. [ 1.066192] RPC: Registered udp transport module. [ 1.066233] RPC: Registered tcp transport module. [ 1.066261] RPC: Registered tcp-with-tls transport module. [ 1.066285] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.066594] PCI: CLS 0 bytes, default 64 [ 1.257049] workingset: timestamp_bits=46 max_order=18 bucket_order=0 [ 1.265538] NFS: Registering the id_resolver key type [ 1.268151] Key type id_resolver registered [ 1.268258] Key type id_legacy registered [ 1.282837] Key type cifs.idmap registered [ 1.492108] xor: measuring software checksum speed [ 1.498246] 8regs : 1761 MB/sec [ 1.504446] 8regs_prefetch : 1781 MB/sec [ 1.510656] 32regs : 1748 MB/sec [ 1.517116] 32regs_prefetch : 1780 MB/sec [ 1.517370] xor: using function: 8regs_prefetch (1781 MB/sec) [ 1.518170] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.518599] io scheduler mq-deadline registered [ 1.518736] io scheduler kyber registered [ 1.530072] pci-host-generic 30000000.pci: host bridge /soc/pci@30000000 ranges: [ 1.531859] pci-host-generic 30000000.pci: IO 0x0003000000..0x000300ffff -> 0x0000000000 [ 1.533232] pci-host-generic 30000000.pci: MEM 0x0040000000..0x007fffffff -> 0x0040000000 [ 1.533653] pci-host-generic 30000000.pci: MEM 0x0400000000..0x07ffffffff -> 0x0400000000 [ 1.536506] pci-host-generic 30000000.pci: Memory resource size exceeds max for 32 bits [ 1.538286] pci-host-generic 30000000.pci: ECAM at [mem 0x30000000-0x3fffffff] for [bus 00-ff] [ 1.541344] pci-host-generic 30000000.pci: PCI host bridge to bus 0000:00 [ 1.541721] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.541856] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 1.541937] pci_bus 0000:00: root bus resource [mem 0x40000000-0x7fffffff] [ 1.541959] pci_bus 0000:00: root bus resource [mem 0x400000000-0x7ffffffff] [ 1.544390] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 [ 1.551815] pci 0000:00:01.0: [1af4:1005] type 00 class 0x00ff00 [ 1.552244] pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] [ 1.552381] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x00000fff] [ 1.552523] pci 0000:00:01.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 1.553641] pci 0000:00:02.0: [1b36:000d] type 00 class 0x0c0330 [ 1.553727] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 1.555290] pci 0000:00:03.0: [1234:1111] type 00 class 0x038000 [ 1.555370] pci 0000:00:03.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 1.555416] pci 0000:00:03.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 1.555464] pci 0000:00:03.0: reg 0x30: [mem 0x00000000-0x00007fff pref] [ 1.559277] pci 0000:00:03.0: BAR 0: assigned [mem 0x40000000-0x40ffffff pref] [ 1.559723] pci 0000:00:03.0: BAR 6: assigned [mem 0x41000000-0x41007fff pref] [ 1.559921] pci 0000:00:01.0: BAR 4: assigned [mem 0x400000000-0x400003fff 64bit pref] [ 1.560077] pci 0000:00:02.0: BAR 0: assigned [mem 0x400004000-0x400007fff 64bit] [ 1.560188] pci 0000:00:01.0: BAR 1: assigned [mem 0x41008000-0x41008fff] [ 1.560230] pci 0000:00:03.0: BAR 2: assigned [mem 0x41009000-0x41009fff] [ 1.560297] pci 0000:00:01.0: BAR 0: assigned [io 0x0020-0x003f] [ 1.562247] pci 0000:00:02.0: enabling device (0000 -> 0002) [ 1.586057] virtio-pci 0000:00:01.0: enabling device (0000 -> 0003) [ 1.599188] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.769652] printk: console [ttyS0] disabled [ 1.780300] 10000000.serial: ttyS0 at MMIO 0x10000000 (irq = 13, base_baud = 230400) is a 16550A [ 1.783975] printk: console [ttyS0] enabled [ 2.055906] bochs-drm 0000:00:03.0: enabling device (0000 -> 0002) [ 2.058152] [drm] Found bochs VGA, ID 0xb0c5. [ 2.058509] [drm] Framebuffer size 16384 kB @ 0x40000000, mmio @ 0x41009000. [ 2.065921] printk: console [hvc0] enabled [ 2.073231] [drm] Found EDID data blob. [ 2.141236] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:03.0 on minor 0 [ 2.279158] Console: switching to colour frame buffer device 160x50 [ 2.315813] bochs-drm 0000:00:03.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 2.415345] brd: module loaded [ 2.418557] virtio_blk virtio1: 1/0/0 default/read/poll queues [ 2.465900] virtio_blk virtio1: [vda] 1106896 512-byte logical blocks (567 MB/540 MiB) [ 2.514253] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.517181] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 [ 2.527229] xhci_hcd 0000:00:02.0: hcc params 0x00087001 hci version 0x100 quirks 0x0000000000000010 [ 2.534124] xhci_hcd 0000:00:02.0: xHCI Host Controller [ 2.537882] xhci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.543177] xhci_hcd 0000:00:02.0: Host supports USB 3.0 SuperSpeed [ 2.567778] hub 1-0:1.0: USB hub found [ 2.570044] hub 1-0:1.0: 4 ports detected [ 2.579664] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.589816] hub 2-0:1.0: USB hub found [ 2.594320] hub 2-0:1.0: 4 ports detected [ 2.608785] goldfish_rtc 101000.rtc: registered as rtc0 [ 2.611929] goldfish_rtc 101000.rtc: setting system clock to 2024-03-22T19:54:42 UTC (1711137282) [ 2.624826] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 2.640744] usbcore: registered new interface driver usbhid [ 2.643175] usbhid: USB HID core driver [ 2.644808] riscv-pmu-sbi: SBI PMU extension is available [ 2.647117] riscv-pmu-sbi: 16 firmware and 18 hardware counters [ 2.650116] riscv-pmu-sbi: Perf sampling/filtering is not supported as sscof extension is not available [ 2.657052] u32 classifier [ 2.658248] input device check on [ 2.659671] Actions configured [ 2.662570] NET: Registered PF_INET6 protocol family [ 2.683083] Segment Routing with IPv6 [ 2.689047] In-situ OAM (IOAM) with IPv6 [ 2.691978] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 2.700386] NET: Registered PF_PACKET protocol family [ 2.707701] Bridge firewalling registered [ 2.711910] Key type dns_resolver registered [ 2.715984] NET: Registered PF_VSOCK protocol family [ 2.764672] registered taskstats version 1 [ 2.810413] Key type .fscrypt registered [ 2.819656] Key type fscrypt-provisioning registered [ 2.839885] Btrfs loaded, zoned=no, fsverity=no [ 2.845218] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.882495] Key type encrypted registered [ 2.895794] printk: console [netcon0] enabled [ 2.900068] netconsole: network logging started [ 2.963652] IP-Config: Complete: [ 2.965008] device=eth0, hwaddr=52:54:00:12:34:1c, ipaddr=192.168.7.28, mask=255.255.255.0, gw=192.168.7.27 [ 2.969879] host=192.168.7.28, domain=, nis-domain=(none) [ 2.972037] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 2.972153] nameserver0=8.8.8.8 [ 2.979418] clk: Disabling unused clocks [ 2.991699] md: Waiting for all devices to be available before autodetect [ 2.996616] md: If you don't use raid, use raid=noautodetect [ 2.997608] md: Autodetecting RAID arrays. [ 2.998232] md: autorun ... [ 2.998725] md: ... autorun DONE. [ 3.033402] input: QEMU QEMU USB Tablet as /devices/platform/soc/30000000.pci/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input0 [ 3.045279] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:02.0-1/input0 [ 3.131928] EXT4-fs (vda): mounted filesystem d1c27541-c503-40c6-baa0-a822734d09ac r/w with ordered data mode. Quota mode: disabled. [ 3.138098] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 3.145222] devtmpfs: mounted [ 3.175092] usb 1-2: new high-speed USB device number 3 using xhci_hcd [ 3.308656] Freeing unused kernel image (initmem) memory: 2252K [ 3.313691] Run /sbin/init as init process [ 3.318947] with arguments: [ 3.319933] /sbin/init [ 3.319998] with environment: [ 3.320050] HOME=/ [ 3.320091] TERM=linux [ 3.357620] input: QEMU QEMU USB Keyboard as /devices/platform/soc/30000000.pci/pci0000:00/0000:00:02.0/usb1/1-2/1-2:1.0/0003:0627:0001.0002/input/input1 [ 3.421612] hid-generic 0003:0627:0001.0002: input: USB HID v1.11 Keyboard [QEMU QEMU USB Keyboard] on usb-0000:00:02.0-2/input0 [ 7.918021] udevd[123]: starting version 3.2.14 [ 8.249826] udevd[124]: starting eudev-3.2.14 [ 9.881551] EXT4-fs (vda): re-mounted d1c27541-c503-40c6-baa0-a822734d09ac r/w. Quota mode: disabled. [ 68.793399] hrtimer: interrupt took 30475400 ns init |-getty 38400 tty1 |-klogd -n |-sshd | `-sshd | `-ptest-runner -t 450 -d /usr/lib | |-ptest-runner-co /usr/bin/ptest-runner-collect-system-data | | `-pstree -a -l | `-(run-ptest) |-start_getty /bin/start_getty 115200 ttyS0 vt102 | `-sh |-start_getty /bin/start_getty 115200 hvc0 vt102 | `-getty -L 115200 hvc0 vt102 |-syslogd -n -O /var/log/messages `-udevd -d Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 501596 226660 236196 49% / devtmpfs 500400 0 500400 0% /dev tmpfs 501524 72 501452 1% /run tmpfs 501524 140 501384 1% /var/volatile total used free shared buff/cache available Mem: 1003052 45388 904656 212 53008 943808 Swap: 0 0 0 ERROR: Exited from signal Killed (9) DURATION: 731