[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.22-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Tue Mar 19 21:00:58 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10648K kernel code, 1425K rwdata, 2836K rodata, 460K init, 339K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42289 entries in 125 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000236] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000733] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.005979] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.014775] Console: colour dummy device 80x30 [ 0.016746] Calibrating delay loop... 600.47 BogoMIPS (lpj=3002368) [ 0.119092] CPU: Testing write buffer coherency: ok [ 0.120854] pid_max: default: 32768 minimum: 301 [ 0.122605] LSM: initializing lsm=capability,landlock,integrity [ 0.123346] landlock: Up and running. [ 0.130250] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.130348] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.184177] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.185301] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.186042] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.187389] Setting up static identity map for 0x8400 - 0x8458 [ 0.189397] rcu: Hierarchical SRCU implementation. [ 0.189467] rcu: Max phase no-delay instances is 1000. [ 0.206333] devtmpfs: initialized [ 0.225203] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.226872] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.227042] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.242211] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.247525] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.269001] platform bridge: Fixed dependency cycle(s) with /vga [ 0.270446] platform vga: Fixed dependency cycle(s) with /bridge [ 0.290094] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.290527] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.290855] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.297714] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.298120] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.305697] Serial: AMBA PL011 UART driver [ 0.316822] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.318495] printk: console [ttyAMA0] enabled [ 0.362662] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.366237] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.369250] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.371390] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.378272] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.749029] raid6: int32x8 gen() 72 MB/s [ 1.088971] raid6: int32x4 gen() 94 MB/s [ 1.428950] raid6: int32x2 gen() 402 MB/s [ 1.768959] raid6: int32x1 gen() 422 MB/s [ 1.769574] raid6: using algorithm int32x1 gen() 422 MB/s [ 2.108978] raid6: .... xor() 208 MB/s, rmw enabled [ 2.109620] raid6: using intx1 recovery algorithm [ 2.116019] SCSI subsystem initialized [ 2.118180] usbcore: registered new interface driver usbfs [ 2.129259] usbcore: registered new interface driver hub [ 2.130038] usbcore: registered new device driver usb [ 2.135566] pps_core: LinuxPPS API ver. 1 registered [ 2.136024] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.136842] PTP clock support registered [ 2.151605] Advanced Linux Sound Architecture Driver Initialized. [ 2.191281] vgaarb: loaded [ 2.210367] clocksource: Switched to clocksource arm,sp804 [ 2.359664] NET: Registered PF_INET protocol family [ 2.363909] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.379245] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.380322] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.381141] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.381905] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.382792] TCP: Hash tables configured (established 2048 bind 2048) [ 2.385069] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.385928] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.388985] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.394625] RPC: Registered named UNIX socket transport module. [ 2.395226] RPC: Registered udp transport module. [ 2.395624] RPC: Registered tcp transport module. [ 2.396036] RPC: Registered tcp-with-tls transport module. [ 2.396537] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.397315] PCI: CLS 0 bytes, default 32 [ 2.406569] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.413913] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.422465] NFS: Registering the id_resolver key type [ 2.424676] Key type id_resolver registered [ 2.425110] Key type id_legacy registered [ 2.431842] Key type cifs.idmap registered [ 2.680387] xor: measuring software checksum speed [ 2.692871] arm4regs : 856 MB/sec [ 2.702500] 8regs : 1136 MB/sec [ 2.712798] 32regs : 1047 MB/sec [ 2.713238] xor: using function: 8regs (1136 MB/sec) [ 2.714521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.715275] io scheduler mq-deadline registered [ 2.715761] io scheduler kyber registered [ 2.716619] io scheduler bfq registered [ 2.729017] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 2.731480] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 2.733733] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 2.735629] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 2.737507] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 2.738859] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 2.740411] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 2.741162] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 2.743338] versatile-pci 10001000.pci: PCI core found (slot 11) [ 2.745934] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 2.746769] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.751976] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.752547] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 2.753121] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 2.756201] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 2.757817] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 2.758430] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 2.758907] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 2.763842] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 2.764397] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 2.764915] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.765487] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.766781] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 2.767317] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 2.767791] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.769113] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 2.769620] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.771124] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 2.771665] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.772894] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 2.773394] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 2.773837] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.776018] PCI: bus0: Fast back to back transfers disabled [ 2.778106] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 2.778883] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 2.779628] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 2.780488] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 2.781089] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 2.781696] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 2.782253] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 2.782783] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 2.783311] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.783807] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 2.784294] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 2.784764] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 2.786815] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 2.789865] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 2.791624] clcd-pl11x: probe of 10120000.display failed with error -2 [ 2.794891] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 2.798445] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 2.800689] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 2.804339] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 2.808281] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.829817] random: crng init done [ 2.833915] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 2.835077] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.835130] [drm] features: -context_init [ 2.836297] [drm] number of scanouts: 1 [ 2.836640] [drm] number of cap sets: 0 [ 2.853912] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 3.032934] Console: switching to colour frame buffer device 160x50 [ 3.046350] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.065613] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 3.068686] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.145927] brd: module loaded [ 3.147191] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 3.153672] virtio_blk virtio3: [vda] 959176 512-byte logical blocks (491 MB/468 MiB) [ 3.173981] physmap-flash 34000000.flash: versatile/realview flash protection [ 3.187386] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 3.191437] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 3.192870] Intel/Sharp Extended Query Table at 0x0031 [ 3.194327] Using buffer write method [ 3.239151] smc91x: not found (-19). [ 3.241202] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 3.242014] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 3.283168] rtc-ds1307 0-0068: registered as rtc0 [ 3.292832] rtc-ds1307 0-0068: setting system clock to 2024-03-23T21:47:59 UTC (1711230479) [ 3.299867] rtc-pl031 101e8000.rtc: registered as rtc1 [ 3.301807] i2c_dev: i2c /dev entries driver [ 3.303581] versatile reboot driver registered [ 3.306945] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.319201] leds-syscon 10000008.0.led: registered LED (null) [ 3.321998] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 3.327017] leds-syscon 10000008.1.led: registered LED (null) [ 3.328055] leds-syscon 10000008.2.led: registered LED (null) [ 3.329105] leds-syscon 10000008.3.led: registered LED (null) [ 3.330617] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 3.332254] leds-syscon 10000008.4.led: registered LED (null) [ 3.333348] leds-syscon 10000008.5.led: registered LED (null) [ 3.334354] leds-syscon 10000008.6.led: registered LED (null) [ 3.335318] leds-syscon 10000008.7.led: registered LED (null) [ 3.336958] ledtrig-cpu: registered to indicate activity on CPUs [ 3.351298] usbcore: registered new interface driver usbhid [ 3.351743] usbhid: USB HID core driver [ 3.373596] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.398763] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.399438] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.402833] u32 classifier [ 3.403123] input device check on [ 3.403432] Actions configured [ 3.405602] NET: Registered PF_INET6 protocol family [ 3.417733] Segment Routing with IPv6 [ 3.418402] In-situ OAM (IOAM) with IPv6 [ 3.419743] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.425522] NET: Registered PF_PACKET protocol family [ 3.426756] Bridge firewalling registered [ 3.428345] Key type dns_resolver registered [ 3.429579] NET: Registered PF_VSOCK protocol family [ 3.483459] registered taskstats version 1 [ 3.527006] Key type .fscrypt registered [ 3.527390] Key type fscrypt-provisioning registered [ 3.538753] Btrfs loaded, zoned=no, fsverity=no [ 3.548331] Key type encrypted registered [ 3.565293] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.565973] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.567346] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.569996] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.571782] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.573298] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.581079] printk: console [netcon0] enabled [ 3.581551] netconsole: network logging started [ 4.029054] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 4.042840] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.044412] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.047725] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.156902] IP-Config: Complete: [ 4.157678] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 4.159508] host=192.168.7.4, domain=, nis-domain=(none) [ 4.161172] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.161376] nameserver0=8.8.8.8 [ 4.172808] clk: Disabling unused clocks [ 4.174241] ALSA device list: [ 4.174834] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.198124] md: Waiting for all devices to be available before autodetect [ 4.199001] md: If you don't use raid, use raid=noautodetect [ 4.199795] md: Autodetecting RAID arrays. [ 4.201360] md: autorun ... [ 4.201900] md: ... autorun DONE. [ 4.377626] EXT4-fs (vda): mounted filesystem a7a8a762-6e7e-43d2-b072-0f4e25f2dc73 r/w with ordered data mode. Quota mode: disabled. [ 4.379446] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.384257] devtmpfs: mounted [ 4.454690] Freeing unused kernel image (initmem) memory: 460K [ 4.455426] Kernel memory protection not selected by kernel config. [ 4.456600] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 8.745835] udevd[95]: starting version 3.2.14 [ 8.962019] udevd[96]: starting eudev-3.2.14 [ 14.563882] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 14.566814] clcd-pl11x: probe of 10120000.display failed with error -2 [ 14.569447] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 14.683993] amba 10100000.smc: deferred probe pending [ 14.685273] amba 10110000.mpmc: deferred probe pending [ 14.685621] amba 101e0000.sctl: deferred probe pending [ 14.685949] amba 101e1000.watchdog: deferred probe pending [ 14.686307] amba 101f0000.sci: deferred probe pending [ 14.686634] amba 101f4000.spi: deferred probe pending [ 14.686960] amba 1000a000.sci: deferred probe pending [ 14.687298] amba 10120000.display: deferred probe pending [ 35.692350] EXT4-fs (vda): re-mounted a7a8a762-6e7e-43d2-b072-0f4e25f2dc73 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: X.Org X Server 1.21.1dropbear. .11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.22-yocto-standard #1 PREEMPT Tue Mar 19 21:00:58 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 23 21:48:45 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-5cd06a53b62b86fbfbc068c1a4a304aa5e8b439c qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-DGqFlzYZaw,guid=11467e61706afe27206ab70e65ff4e51 Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[530]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=510 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[530]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry