[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.22-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Tue Mar 19 21:00:58 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10648K kernel code, 1425K rwdata, 2836K rodata, 460K init, 339K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42289 entries in 125 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000213] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000763] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.005918] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.017230] Console: colour dummy device 80x30 [ 0.020323] Calibrating delay loop... 623.41 BogoMIPS (lpj=3117056) [ 0.072539] CPU: Testing write buffer coherency: ok [ 0.075726] pid_max: default: 32768 minimum: 301 [ 0.079118] LSM: initializing lsm=capability,landlock,integrity [ 0.080467] landlock: Up and running. [ 0.088056] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.088245] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.183558] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.185817] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.186893] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.190237] Setting up static identity map for 0x8400 - 0x8458 [ 0.193010] rcu: Hierarchical SRCU implementation. [ 0.193157] rcu: Max phase no-delay instances is 1000. [ 0.224912] devtmpfs: initialized [ 0.253384] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.256730] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.257047] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.280537] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.292524] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.335303] platform bridge: Fixed dependency cycle(s) with /vga [ 0.337888] platform vga: Fixed dependency cycle(s) with /bridge [ 0.375046] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.375818] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.376308] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.389217] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.390056] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.404655] Serial: AMBA PL011 UART driver [ 0.423815] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.426311] printk: console [ttyAMA0] enabled [ 0.472033] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.476933] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.480896] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.483340] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.494879] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.879273] raid6: int32x8 gen() 48 MB/s [ 1.219234] raid6: int32x4 gen() 53 MB/s [ 1.559216] raid6: int32x2 gen() 227 MB/s [ 1.899183] raid6: int32x1 gen() 291 MB/s [ 1.900132] raid6: using algorithm int32x1 gen() 291 MB/s [ 2.239250] raid6: .... xor() 170 MB/s, rmw enabled [ 2.244263] raid6: using intx1 recovery algorithm [ 2.267856] SCSI subsystem initialized [ 2.282522] usbcore: registered new interface driver usbfs [ 2.285392] usbcore: registered new interface driver hub [ 2.286654] usbcore: registered new device driver usb [ 2.306539] pps_core: LinuxPPS API ver. 1 registered [ 2.319513] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.321529] PTP clock support registered [ 2.334382] Advanced Linux Sound Architecture Driver Initialized. [ 2.412058] vgaarb: loaded [ 2.433103] clocksource: Switched to clocksource arm,sp804 [ 2.956382] NET: Registered PF_INET protocol family [ 2.960135] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.978370] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.979561] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.980438] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.981294] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.982001] TCP: Hash tables configured (established 2048 bind 2048) [ 2.985114] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.985898] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.989848] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.999105] RPC: Registered named UNIX socket transport module. [ 2.999951] RPC: Registered udp transport module. [ 3.000446] RPC: Registered tcp transport module. [ 3.000923] RPC: Registered tcp-with-tls transport module. [ 3.001457] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 3.002350] PCI: CLS 0 bytes, default 32 [ 3.014223] NetWinder Floating Point Emulator V0.97 (double precision) [ 3.027658] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 3.039713] NFS: Registering the id_resolver key type [ 3.047371] Key type id_resolver registered [ 3.051183] Key type id_legacy registered [ 3.065668] Key type cifs.idmap registered [ 3.505702] xor: measuring software checksum speed [ 3.525766] arm4regs : 553 MB/sec [ 3.543400] 8regs : 626 MB/sec [ 3.561305] 32regs : 612 MB/sec [ 3.562159] xor: using function: 8regs (626 MB/sec) [ 3.566344] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 3.569921] io scheduler mq-deadline registered [ 3.570708] io scheduler kyber registered [ 3.572150] io scheduler bfq registered [ 3.597999] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 3.603006] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 3.613742] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 3.623320] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 3.632064] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 3.637362] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 3.639238] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 3.639998] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 3.643258] versatile-pci 10001000.pci: PCI core found (slot 11) [ 3.648067] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 3.649483] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.650799] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 3.651591] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 3.652472] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 3.658444] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 3.660956] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 3.661798] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 3.668959] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 3.682661] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 3.688011] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 3.689017] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.689968] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 3.693138] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 3.693865] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 3.694432] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.697058] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 3.697855] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 3.700072] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 3.700898] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.703809] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 3.704559] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 3.704926] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 3.708056] PCI: bus0: Fast back to back transfers disabled [ 3.711053] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 3.712163] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 3.713315] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 3.714286] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 3.715372] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 3.716254] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 3.717129] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 3.717943] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 3.718756] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 3.719539] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 3.720216] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 3.720951] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 3.725245] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 3.731091] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.734202] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.740561] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 3.747390] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 3.750731] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 3.755236] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 3.761694] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 3.801600] random: crng init done [ 3.810213] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 3.812340] [drm] features: -virgl +edid -resource_blob -host_visible [ 3.812460] [drm] features: -context_init [ 3.823417] [drm] number of scanouts: 1 [ 3.826941] [drm] number of cap sets: 0 [ 3.865740] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 4.090128] Console: switching to colour frame buffer device 160x50 [ 4.130025] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 4.154050] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 4.158711] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.267254] brd: module loaded [ 4.268598] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 4.276979] virtio_blk virtio3: [vda] 959258 512-byte logical blocks (491 MB/468 MiB) [ 4.306885] physmap-flash 34000000.flash: versatile/realview flash protection [ 4.327321] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 4.330876] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 4.332326] Intel/Sharp Extended Query Table at 0x0031 [ 4.333936] Using buffer write method [ 4.406427] smc91x: not found (-19). [ 4.409488] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 4.410740] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 4.480350] rtc-ds1307 0-0068: registered as rtc0 [ 4.493794] rtc-ds1307 0-0068: setting system clock to 2024-03-24T07:06:02 UTC (1711263962) [ 4.509872] rtc-pl031 101e8000.rtc: registered as rtc1 [ 4.512130] i2c_dev: i2c /dev entries driver [ 4.514894] versatile reboot driver registered [ 4.518456] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 4.528990] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 4.535694] leds-syscon 10000008.0.led: registered LED (null) [ 4.538204] leds-syscon 10000008.1.led: registered LED (null) [ 4.539793] leds-syscon 10000008.2.led: registered LED (null) [ 4.541196] leds-syscon 10000008.3.led: registered LED (null) [ 4.542391] leds-syscon 10000008.4.led: registered LED (null) [ 4.548086] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 4.553919] leds-syscon 10000008.5.led: registered LED (null) [ 4.555274] leds-syscon 10000008.6.led: registered LED (null) [ 4.556466] leds-syscon 10000008.7.led: registered LED (null) [ 4.558367] ledtrig-cpu: registered to indicate activity on CPUs [ 4.561292] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 4.578002] usbcore: registered new interface driver usbhid [ 4.578888] usbhid: USB HID core driver [ 4.619194] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.619853] aaci-pl041 10004000.aaci: FIFO 512 entries [ 4.621705] u32 classifier [ 4.621999] input device check on [ 4.622259] Actions configured [ 4.634479] NET: Registered PF_INET6 protocol family [ 4.647741] Segment Routing with IPv6 [ 4.648812] In-situ OAM (IOAM) with IPv6 [ 4.650323] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 4.658008] NET: Registered PF_PACKET protocol family [ 4.659810] Bridge firewalling registered [ 4.662327] Key type dns_resolver registered [ 4.666499] NET: Registered PF_VSOCK protocol family [ 4.727741] registered taskstats version 1 [ 4.773486] Key type .fscrypt registered [ 4.773976] Key type fscrypt-provisioning registered [ 4.784094] Btrfs loaded, zoned=no, fsverity=no [ 4.799965] Key type encrypted registered [ 4.806431] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.807143] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.808583] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.812042] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.814146] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.815882] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.818767] printk: console [netcon0] enabled [ 4.819431] netconsole: network logging started [ 5.218115] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 5.223706] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 5.224445] clcd-pl11x: probe of 10120000.display failed with error -2 [ 5.225890] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 5.301228] IP-Config: Complete: [ 5.301662] device=eth0, hwaddr=52:54:00:12:34:06, ipaddr=192.168.7.6, mask=255.255.255.0, gw=192.168.7.5 [ 5.302503] host=192.168.7.6, domain=, nis-domain=(none) [ 5.304717] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 5.304900] nameserver0=8.8.8.8 [ 5.311105] clk: Disabling unused clocks [ 5.312065] ALSA device list: [ 5.312370] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 5.325251] md: Waiting for all devices to be available before autodetect [ 5.325841] md: If you don't use raid, use raid=noautodetect [ 5.326256] md: Autodetecting RAID arrays. [ 5.326580] md: autorun ... [ 5.326843] md: ... autorun DONE. [ 5.537855] EXT4-fs (vda): mounted filesystem 44862813-07b0-4713-ab2c-278b883b3b00 r/w with ordered data mode. Quota mode: disabled. [ 5.540323] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 5.547813] devtmpfs: mounted [ 5.613009] Freeing unused kernel image (initmem) memory: 460K [ 5.613579] Kernel memory protection not selected by kernel config. [ 5.614337] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 9.948964] udevd[96]: starting version 3.2.14 [ 10.172171] udevd[97]: starting eudev-3.2.14 [ 15.875826] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 15.993474] clcd-pl11x: probe of 10120000.display failed with error -2 [ 16.000181] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 16.023590] amba 10100000.smc: deferred probe pending [ 16.028655] amba 10110000.mpmc: deferred probe pending [ 16.143560] amba 101e0000.sctl: deferred probe pending [ 16.148209] amba 101e1000.watchdog: deferred probe pending [ 16.243494] amba 101f0000.sci: deferred probe pending [ 16.248759] amba 101f4000.spi: deferred probe pending [ 16.373303] amba 1000a000.sci: deferred probe pending [ 16.378428] amba 10120000.display: deferred probe pending [ 41.687116] EXT4-fs (vda): re-mounted 44862813-07b0-4713-ab2c-278b883b3b00 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.22-yocto-standard #1 PREEMPT Tue Mar 19 21:00:58 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.6::192.168.7.5:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: dropbear. (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Mar 24 07:07:04 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-7101c4648762e7fea18cd829392da4a7b577e9d3 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-ENe42RQ7f0,guid=5cb4d97fbe3153d7e123287265ffd137 Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[534]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=514 comm="connman-applet") matchbox-wm: X error warning (0xa00002): BadWindow (invalid Window parameter) (opcode: 12) dbus-daemon[534]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry