[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.22-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Tue Mar 19 21:00:58 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10648K kernel code, 1425K rwdata, 2836K rodata, 460K init, 339K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42289 entries in 125 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000213] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000700] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.005721] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.014152] Console: colour dummy device 80x30 [ 0.016040] Calibrating delay loop... 660.68 BogoMIPS (lpj=3303424) [ 0.119161] CPU: Testing write buffer coherency: ok [ 0.120859] pid_max: default: 32768 minimum: 301 [ 0.122476] LSM: initializing lsm=capability,landlock,integrity [ 0.123156] landlock: Up and running. [ 0.126718] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.126794] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.175626] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.176391] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.177353] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.178492] Setting up static identity map for 0x8400 - 0x8458 [ 0.180269] rcu: Hierarchical SRCU implementation. [ 0.180335] rcu: Max phase no-delay instances is 1000. [ 0.196041] devtmpfs: initialized [ 0.213599] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.215116] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.215270] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.227574] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.232664] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.251988] platform bridge: Fixed dependency cycle(s) with /vga [ 0.253286] platform vga: Fixed dependency cycle(s) with /bridge [ 0.270581] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.270976] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.271265] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.277382] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.277738] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.289568] Serial: AMBA PL011 UART driver [ 0.299598] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.301164] printk: console [ttyAMA0] enabled [ 0.337989] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.341515] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.344071] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.345979] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.352423] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.708975] raid6: int32x8 gen() 80 MB/s [ 1.048923] raid6: int32x4 gen() 103 MB/s [ 1.388953] raid6: int32x2 gen() 449 MB/s [ 1.728922] raid6: int32x1 gen() 474 MB/s [ 1.729452] raid6: using algorithm int32x1 gen() 474 MB/s [ 2.049813] raid6: .... xor() 235 MB/s, rmw enabled [ 2.050311] raid6: using intx1 recovery algorithm [ 2.056112] SCSI subsystem initialized [ 2.058128] usbcore: registered new interface driver usbfs [ 2.059065] usbcore: registered new interface driver hub [ 2.059749] usbcore: registered new device driver usb [ 2.064553] pps_core: LinuxPPS API ver. 1 registered [ 2.064910] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.065601] PTP clock support registered [ 2.069374] Advanced Linux Sound Architecture Driver Initialized. [ 2.086026] vgaarb: loaded [ 2.089798] clocksource: Switched to clocksource arm,sp804 [ 2.167289] NET: Registered PF_INET protocol family [ 2.169507] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.179857] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.180531] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.181111] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.181686] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.182351] TCP: Hash tables configured (established 2048 bind 2048) [ 2.184186] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.184866] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.187361] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.192525] RPC: Registered named UNIX socket transport module. [ 2.193009] RPC: Registered udp transport module. [ 2.193324] RPC: Registered tcp transport module. [ 2.193633] RPC: Registered tcp-with-tls transport module. [ 2.193976] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.194536] PCI: CLS 0 bytes, default 32 [ 2.200456] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.207978] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.214477] NFS: Registering the id_resolver key type [ 2.216274] Key type id_resolver registered [ 2.216606] Key type id_legacy registered [ 2.222284] Key type cifs.idmap registered [ 2.440766] xor: measuring software checksum speed [ 2.451564] arm4regs : 986 MB/sec [ 2.459819] 8regs : 1295 MB/sec [ 2.468459] 32regs : 1210 MB/sec [ 2.468820] xor: using function: 8regs (1295 MB/sec) [ 2.470164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.471270] io scheduler mq-deadline registered [ 2.471684] io scheduler kyber registered [ 2.472427] io scheduler bfq registered [ 2.483636] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 2.485557] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 2.487535] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 2.489272] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 2.491550] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 2.492792] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 2.493934] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 2.494524] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 2.496442] versatile-pci 10001000.pci: PCI core found (slot 11) [ 2.498755] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 2.499454] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.500401] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.500864] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 2.501337] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 2.504115] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 2.505457] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 2.505964] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 2.506379] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 2.511079] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 2.511573] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 2.512033] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.512541] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.513711] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 2.514161] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 2.514550] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.515632] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 2.516068] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.517082] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 2.517529] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.518645] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 2.519083] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 2.519466] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.521817] PCI: bus0: Fast back to back transfers disabled [ 2.523706] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 2.524411] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 2.525075] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 2.525623] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 2.526101] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 2.526595] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 2.527088] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 2.527539] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 2.528003] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.528435] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 2.528837] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 2.529233] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 2.531472] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 2.534587] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 2.535990] clcd-pl11x: probe of 10120000.display failed with error -2 [ 2.539017] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 2.542667] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 2.544508] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 2.547027] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 2.550873] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.570278] random: crng init done [ 2.574006] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 2.575512] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.575561] [drm] features: -context_init [ 2.576675] [drm] number of scanouts: 1 [ 2.576977] [drm] number of cap sets: 0 [ 2.593426] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 2.837578] Console: switching to colour frame buffer device 160x50 [ 2.861566] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 2.879024] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 2.881760] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 2.943132] brd: module loaded [ 2.944288] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 2.950607] virtio_blk virtio3: [vda] 959258 512-byte logical blocks (491 MB/468 MiB) [ 2.971078] physmap-flash 34000000.flash: versatile/realview flash protection [ 2.984617] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 2.987676] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 2.988900] Intel/Sharp Extended Query Table at 0x0031 [ 2.990280] Using buffer write method [ 3.032852] smc91x: not found (-19). [ 3.033939] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 3.034586] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 3.070900] rtc-ds1307 0-0068: registered as rtc0 [ 3.086299] rtc-ds1307 0-0068: setting system clock to 2024-03-26T19:43:26 UTC (1711482206) [ 3.094550] rtc-pl031 101e8000.rtc: registered as rtc1 [ 3.095788] i2c_dev: i2c /dev entries driver [ 3.097317] versatile reboot driver registered [ 3.100695] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.110268] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 3.114957] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 3.118289] leds-syscon 10000008.0.led: registered LED (null) [ 3.121418] leds-syscon 10000008.1.led: registered LED (null) [ 3.122418] leds-syscon 10000008.2.led: registered LED (null) [ 3.123299] leds-syscon 10000008.3.led: registered LED (null) [ 3.124256] leds-syscon 10000008.4.led: registered LED (null) [ 3.125360] leds-syscon 10000008.5.led: registered LED (null) [ 3.126362] leds-syscon 10000008.6.led: registered LED (null) [ 3.127276] leds-syscon 10000008.7.led: registered LED (null) [ 3.131004] ledtrig-cpu: registered to indicate activity on CPUs [ 3.134450] usbcore: registered new interface driver usbhid [ 3.134842] usbhid: USB HID core driver [ 3.163089] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.182435] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.183075] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.184746] u32 classifier [ 3.184988] input device check on [ 3.185247] Actions configured [ 3.187273] NET: Registered PF_INET6 protocol family [ 3.199403] Segment Routing with IPv6 [ 3.200985] In-situ OAM (IOAM) with IPv6 [ 3.202260] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.206777] NET: Registered PF_PACKET protocol family [ 3.207835] Bridge firewalling registered [ 3.209335] Key type dns_resolver registered [ 3.210850] NET: Registered PF_VSOCK protocol family [ 3.260531] registered taskstats version 1 [ 3.305507] Key type .fscrypt registered [ 3.305929] Key type fscrypt-provisioning registered [ 3.316805] Btrfs loaded, zoned=no, fsverity=no [ 3.326098] Key type encrypted registered [ 3.331182] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.331774] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.333066] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.335662] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.336210] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.337402] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.339259] printk: console [netcon0] enabled [ 3.341258] netconsole: network logging started [ 3.803416] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 3.806837] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.807434] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.808679] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.866856] IP-Config: Complete: [ 3.867274] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 3.868113] host=192.168.7.4, domain=, nis-domain=(none) [ 3.868491] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 3.868567] nameserver0=8.8.8.8 [ 3.873795] clk: Disabling unused clocks [ 3.874515] ALSA device list: [ 3.874819] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.883926] md: Waiting for all devices to be available before autodetect [ 3.884416] md: If you don't use raid, use raid=noautodetect [ 3.884835] md: Autodetecting RAID arrays. [ 3.885154] md: autorun ... [ 3.885403] md: ... autorun DONE. [ 4.001854] EXT4-fs (vda): mounted filesystem d499875f-bbd2-4744-8b05-0ef1eae10660 r/w with ordered data mode. Quota mode: disabled. [ 4.003284] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.007726] devtmpfs: mounted [ 4.055795] Freeing unused kernel image (initmem) memory: 460K [ 4.056344] Kernel memory protection not selected by kernel config. [ 4.057125] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 7.975721] udevd[97]: starting version 3.2.14 [ 8.168495] udevd[98]: starting eudev-3.2.14 [ 14.093031] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 14.094126] clcd-pl11x: probe of 10120000.display failed with error -2 [ 14.096307] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 14.100385] amba 10100000.smc: deferred probe pending [ 14.101082] amba 10110000.mpmc: deferred probe pending [ 14.101353] amba 101e0000.sctl: deferred probe pending [ 14.101619] amba 101e1000.watchdog: deferred probe pending [ 14.101889] amba 101f0000.sci: deferred probe pending [ 14.102146] amba 101f4000.spi: deferred probe pending [ 14.102405] amba 1000a000.sci: deferred probe pending [ 14.102665] amba 10120000.display: deferred probe pending [ 30.821645] EXT4-fs (vda): re-mounted d499875f-bbd2-4744-8b05-0ef1eae10660 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.22-yocto-standard #1 PREEMPT Tue Mar 19 21:00:58 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 26 19:44:06 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-8a20eb2b03249c06e4ed5c6aa7217566cd0fc921 qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-MOUTjhi8SJ,guid=88506ac9a599bf8d036e79a7660325a0 Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[533]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=515 comm="connman-applet") dbus-daemon[533]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry