[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.22-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Tue Mar 19 21:00:58 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10648K kernel code, 1425K rwdata, 2836K rodata, 460K init, 339K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42289 entries in 125 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000375] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.001318] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.010076] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.019785] Console: colour dummy device 80x30 [ 0.021978] Calibrating delay loop... 632.01 BogoMIPS (lpj=3160064) [ 0.208335] CPU: Testing write buffer coherency: ok [ 0.210432] pid_max: default: 32768 minimum: 301 [ 0.212238] LSM: initializing lsm=capability,landlock,integrity [ 0.212980] landlock: Up and running. [ 0.249590] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.250093] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.305173] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.309075] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.309767] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.311262] Setting up static identity map for 0x8400 - 0x8458 [ 0.313151] rcu: Hierarchical SRCU implementation. [ 0.313229] rcu: Max phase no-delay instances is 1000. [ 0.332819] devtmpfs: initialized [ 0.355392] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.357258] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.357471] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.394845] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.400758] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.422170] platform bridge: Fixed dependency cycle(s) with /vga [ 0.423484] platform vga: Fixed dependency cycle(s) with /bridge [ 0.441793] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.442797] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.443153] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.449829] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.450218] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.457022] Serial: AMBA PL011 UART driver [ 0.468037] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.469682] printk: console [ttyAMA0] enabled [ 0.492537] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.495482] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.497720] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.500579] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.506434] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.878228] raid6: int32x8 gen() 79 MB/s [ 1.218216] raid6: int32x4 gen() 100 MB/s [ 1.558064] raid6: int32x2 gen() 385 MB/s [ 1.898073] raid6: int32x1 gen() 472 MB/s [ 1.898640] raid6: using algorithm int32x1 gen() 472 MB/s [ 2.238069] raid6: .... xor() 231 MB/s, rmw enabled [ 2.238625] raid6: using intx1 recovery algorithm [ 2.244336] SCSI subsystem initialized [ 2.246337] usbcore: registered new interface driver usbfs [ 2.247067] usbcore: registered new interface driver hub [ 2.247748] usbcore: registered new device driver usb [ 2.265502] pps_core: LinuxPPS API ver. 1 registered [ 2.265995] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.266707] PTP clock support registered [ 2.281185] Advanced Linux Sound Architecture Driver Initialized. [ 2.320729] vgaarb: loaded [ 2.326135] clocksource: Switched to clocksource arm,sp804 [ 2.440135] NET: Registered PF_INET protocol family [ 2.442666] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.453337] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.454103] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.454678] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.455255] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.455945] TCP: Hash tables configured (established 2048 bind 2048) [ 2.458185] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.458883] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.461572] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.468497] RPC: Registered named UNIX socket transport module. [ 2.469341] RPC: Registered udp transport module. [ 2.469811] RPC: Registered tcp transport module. [ 2.470234] RPC: Registered tcp-with-tls transport module. [ 2.470758] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.471616] PCI: CLS 0 bytes, default 32 [ 2.472987] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.489623] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.499578] NFS: Registering the id_resolver key type [ 2.502128] Key type id_resolver registered [ 2.502826] Key type id_legacy registered [ 2.517498] Key type cifs.idmap registered [ 2.782039] xor: measuring software checksum speed [ 2.798523] arm4regs : 775 MB/sec [ 2.809127] 8regs : 1266 MB/sec [ 2.819037] 32regs : 1133 MB/sec [ 2.819579] xor: using function: 8regs (1266 MB/sec) [ 2.820979] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.821642] io scheduler mq-deadline registered [ 2.822245] io scheduler kyber registered [ 2.823006] io scheduler bfq registered [ 2.833247] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 2.838231] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 2.841104] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 2.843674] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 2.846815] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 2.848936] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 2.850543] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 2.851152] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 2.853054] versatile-pci 10001000.pci: PCI core found (slot 11) [ 2.855870] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 2.856933] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.857653] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.858088] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 2.858558] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 2.861488] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 2.862849] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 2.863360] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 2.863767] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 2.868580] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 2.869126] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 2.869603] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.870413] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.872548] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 2.873088] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 2.873530] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.874789] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 2.875233] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.876901] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 2.877419] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.878708] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 2.879134] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 2.879546] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.881739] PCI: bus0: Fast back to back transfers disabled [ 2.883643] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 2.884375] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 2.885170] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 2.885716] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 2.886877] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 2.887438] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 2.887974] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 2.888447] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 2.888907] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.889343] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 2.889736] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 2.890124] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 2.892419] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 2.895657] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 2.897534] clcd-pl11x: probe of 10120000.display failed with error -2 [ 2.900892] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 2.905577] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 2.908909] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 2.912146] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 2.917347] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.942748] random: crng init done [ 2.947923] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 2.949378] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.949455] [drm] features: -context_init [ 2.951068] [drm] number of scanouts: 1 [ 2.951561] [drm] number of cap sets: 0 [ 2.979523] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 3.145804] Console: switching to colour frame buffer device 160x50 [ 3.191952] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.223332] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 3.228344] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.348832] brd: module loaded [ 3.350698] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 3.361304] virtio_blk virtio3: [vda] 959228 512-byte logical blocks (491 MB/468 MiB) [ 3.392858] physmap-flash 34000000.flash: versatile/realview flash protection [ 3.413691] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 3.417036] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 3.418352] Intel/Sharp Extended Query Table at 0x0031 [ 3.419488] Using buffer write method [ 3.470817] smc91x: not found (-19). [ 3.472881] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 3.474058] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 3.522599] rtc-ds1307 0-0068: registered as rtc0 [ 3.533305] rtc-ds1307 0-0068: setting system clock to 2024-03-28T11:53:51 UTC (1711626831) [ 3.545564] rtc-pl031 101e8000.rtc: registered as rtc1 [ 3.549266] i2c_dev: i2c /dev entries driver [ 3.552103] versatile reboot driver registered [ 3.555693] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.569289] leds-syscon 10000008.0.led: registered LED (null) [ 3.571335] leds-syscon 10000008.1.led: registered LED (null) [ 3.572891] leds-syscon 10000008.2.led: registered LED (null) [ 3.574280] leds-syscon 10000008.3.led: registered LED (null) [ 3.575711] leds-syscon 10000008.4.led: registered LED (null) [ 3.581925] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 3.589351] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 3.593466] leds-syscon 10000008.5.led: registered LED (null) [ 3.595303] leds-syscon 10000008.6.led: registered LED (null) [ 3.597750] leds-syscon 10000008.7.led: registered LED (null) [ 3.601963] ledtrig-cpu: registered to indicate activity on CPUs [ 3.612821] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.618476] usbcore: registered new interface driver usbhid [ 3.618971] usbhid: USB HID core driver [ 3.665619] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.667779] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.669651] u32 classifier [ 3.669888] input device check on [ 3.670135] Actions configured [ 3.672175] NET: Registered PF_INET6 protocol family [ 3.684560] Segment Routing with IPv6 [ 3.685308] In-situ OAM (IOAM) with IPv6 [ 3.686896] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.692096] NET: Registered PF_PACKET protocol family [ 3.693342] Bridge firewalling registered [ 3.694965] Key type dns_resolver registered [ 3.708208] NET: Registered PF_VSOCK protocol family [ 3.775673] registered taskstats version 1 [ 3.822979] Key type .fscrypt registered [ 3.823440] Key type fscrypt-provisioning registered [ 3.834616] Btrfs loaded, zoned=no, fsverity=no [ 3.845491] Key type encrypted registered [ 3.853597] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.854257] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.855564] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.860374] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.861093] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.862526] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.864778] printk: console [netcon0] enabled [ 3.865260] netconsole: network logging started [ 4.270052] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 4.275655] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.279409] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.288611] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.385309] IP-Config: Complete: [ 4.385736] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 4.387027] host=192.168.7.4, domain=, nis-domain=(none) [ 4.387431] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.387516] nameserver0=8.8.8.8 [ 4.392963] clk: Disabling unused clocks [ 4.393755] ALSA device list: [ 4.394059] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.401748] md: Waiting for all devices to be available before autodetect [ 4.402365] md: If you don't use raid, use raid=noautodetect [ 4.402785] md: Autodetecting RAID arrays. [ 4.403107] md: autorun ... [ 4.403366] md: ... autorun DONE. [ 4.559094] EXT4-fs (vda): mounted filesystem 617c82c2-f596-44c9-b7d3-34fc03727124 r/w with ordered data mode. Quota mode: disabled. [ 4.561710] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.569700] devtmpfs: mounted [ 4.658461] Freeing unused kernel image (initmem) memory: 460K [ 4.659565] Kernel memory protection not selected by kernel config. [ 4.661296] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 9.312373] udevd[97]: starting version 3.2.14 [ 9.531251] udevd[98]: starting eudev-3.2.14 [ 14.602967] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 14.604288] clcd-pl11x: probe of 10120000.display failed with error -2 [ 14.751240] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 14.757535] amba 10100000.smc: deferred probe pending [ 14.758434] amba 10110000.mpmc: deferred probe pending [ 14.758739] amba 101e0000.sctl: deferred probe pending [ 14.759033] amba 101e1000.watchdog: deferred probe pending [ 14.759340] amba 101f0000.sci: deferred probe pending [ 14.759624] amba 101f4000.spi: deferred probe pending [ 14.759916] amba 1000a000.sci: deferred probe pending [ 14.760220] amba 10120000.display: deferred probe pending [ 35.769283] EXT4-fs (vda): re-mounted 617c82c2-f596-44c9-b7d3-34fc03727124 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.22-yocto-standard #1 PREEMPT Tue Mar 19 21:00:58 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 28 11:54:39 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-37577c36e4b3aebfb2b99f6d6cdcfaa4253b81aa qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: The XKEYBOARD keymap compiler (xkbcomp) reports: > Warning: Could not resolve keysym XF86CameraAccessEnable > Warning: Could not resolve keysym XF86CameraAccessDisable > Warning: Could not resolve keysym XF86CameraAccessToggle > Warning: Could not resolve keysym XF86NextElement > Warning: Could not resolve keysym XF86PreviousElement > Warning: Could not resolve keysym XF86AutopilotEngageToggle > Warning: Could not resolve keysym XF86MarkWaypoint > Warning: Could not resolve keysym XF86Sos > Warning: Could not resolve keysym XF86NavChart > Warning: Could not resolve keysym XF86FishingChart > Warning: Could not resolve keysym XF86SingleRangeRadar > Warning: Could not resolve keysym XF86DualRangeRadar > Warning: Could not resolve keysym XF86RadarOverlay > Warning: Could not resolve keysym XF86TraditionalSonar > Warning: Could not resolve keysym XF86ClearvuSonar > Warning: Could not resolve keysym XF86SidevuSonar > Warning: Could not resolve keysym XF86NavInfo Errors from xkbcomp are not fatal to the X server D-BUS per-session daemon address is: unix:path=/tmp/dbus-0YoEsg8CnS,guid=7682430c43b00d0712d01ea666055a97 Using calibration data stored in /etc/pointercal.xinput matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop [settings daemon] Forking. run with -n to prevent fork Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[531]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=512 comm="connman-applet") dbus-daemon[531]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry