[ 0.000000] Linux version 6.6.22-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Tue Mar 19 21:01:07 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239296K/262140K available (14193K kernel code, 1466K rwdata, 2740K rodata, 408K init, 394K bss, 22844K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.01 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945012869 ns [ 0.000504] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421363196ns [ 0.032230] Console: colour dummy device 80x25 [ 0.034861] printk: console [tty0] enabled [ 0.037053] printk: bootconsole [uart8250] disabled [ 0.000000] Linux version 6.6.22-yocto-standard (oe-user@oe-host) (mips-poky-linux-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 SMP PREEMPT Tue Mar 19 21:01:07 UTC 2024 [ 0.000000] earlycon: uart8250 at I/O port 0x3f8 (options '38400n8') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] CPU0 revision is: 00019500 (MIPS 34Kc) [ 0.000000] FPU revision is: 00739500 [ 0.000000] MIPS: machine is mti,malta [ 0.000000] Software DMA cache coherency enabled [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 2kB, VIPT, 2-way, linesize 16 bytes. [ 0.000000] Primary data cache 2kB, 2-way, VIPT, no aliases, linesize 16 bytes [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x000000000fffefff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffefff] [ 0.000000] random: crng init done [ 0.000000] percpu: Embedded 17 pages/cpu s40672 r8192 d20768 u69632 [ 0.000000] Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64959 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 239296K/262140K available (14193K kernel code, 1466K rwdata, 2740K rodata, 408K init, 394K bss, 22844K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 [ 0.000000] NR_IRQS: 256 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] CPU frequency 320.01 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11945012869 ns [ 0.000504] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 13421363196ns [ 0.032230] Console: colour dummy device 80x25 [ 0.034861] printk: console [tty0] enabled [ 0.037053] printk: bootconsole [uart8250] disabled [ 0.043463] Calibrating delay loop... 660.68 BogoMIPS (lpj=3303424) [ 0.156592] pid_max: default: 32768 minimum: 301 [ 0.160363] LSM: initializing lsm=capability,landlock,integrity [ 0.162000] landlock: Up and running. [ 0.169285] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.169730] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.271111] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.272501] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.274547] Performance counters: No available PMU. [ 0.277488] rcu: Hierarchical SRCU implementation. [ 0.277666] rcu: Max phase no-delay instances is 1000. [ 0.298243] smp: Bringing up secondary CPUs ... [ 0.299151] smp: Brought up 1 node, 1 CPU [ 0.334852] devtmpfs: initialized [ 0.355869] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.356504] futex hash table entries: 256 (order: 2, 16384 bytes, linear) [ 0.379372] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.820175] raid6: int32x8 gen() 110 MB/s [ 1.172725] raid6: int32x4 gen() 252 MB/s [ 1.519186] raid6: int32x2 gen() 423 MB/s [ 1.865417] raid6: int32x1 gen() 440 MB/s [ 1.865645] raid6: using algorithm int32x1 gen() 440 MB/s [ 2.186640] raid6: .... xor() 253 MB/s, rmw enabled [ 2.186849] raid6: using intx1 recovery algorithm [ 2.191181] SCSI subsystem initialized [ 2.192050] usbcore: registered new interface driver usbfs [ 2.192500] usbcore: registered new interface driver hub [ 2.192805] usbcore: registered new device driver usb [ 2.193405] pps_core: LinuxPPS API ver. 1 registered [ 2.193486] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.193698] PTP clock support registered [ 2.218704] PCI host bridge to bus 0000:00 [ 2.219248] pci_bus 0000:00: root bus resource [mem 0x10000000-0x17ffffff] [ 2.220007] pci_bus 0000:00: root bus resource [io 0x1000-0x1fffff] [ 2.220244] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 2.222570] pci 0000:00:00.0: [2046:ab11] type 00 class 0x100000 [ 2.223656] pci 0000:00:00.0: [Firmware Bug]: reg 0x10: invalid BAR (can't size) [ 2.223875] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.224090] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.224213] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.224343] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.224469] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.228119] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.229334] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 [ 2.229772] pci 0000:00:0a.1: reg 0x20: [io 0x0000-0x000f] [ 2.229986] pci 0000:00:0a.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 2.230093] pci 0000:00:0a.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 2.230221] pci 0000:00:0a.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 2.230319] pci 0000:00:0a.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 2.230870] pci 0000:00:0a.2: [8086:7112] type 00 class 0x0c0300 [ 2.231093] pci 0000:00:0a.2: reg 0x20: [io 0x0000-0x001f] [ 2.232304] pci 0000:00:0a.3: [8086:7113] type 00 class 0x068000 [ 2.233095] pci 0000:00:0a.3: quirk: [io 0x1000-0x103f] claimed by PIIX4 ACPI [ 2.233297] pci 0000:00:0a.3: quirk: [io 0x1100-0x110f] claimed by PIIX4 SMB [ 2.234061] pci 0000:00:12.0: [1234:1111] type 00 class 0x030000 [ 2.234193] pci 0000:00:12.0: reg 0x10: [mem 0x00000000-0x00ffffff pref] [ 2.234396] pci 0000:00:12.0: reg 0x18: [mem 0x00000000-0x00000fff] [ 2.234538] pci 0000:00:12.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 2.235221] pci 0000:00:13.0: [1af4:1000] type 00 class 0x020000 [ 2.235367] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x001f] [ 2.235557] pci 0000:00:13.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.235748] pci 0000:00:13.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.236311] pci 0000:00:14.0: [1af4:1005] type 00 class 0x00ff00 [ 2.236448] pci 0000:00:14.0: reg 0x10: [io 0x0000-0x001f] [ 2.236606] pci 0000:00:14.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.237199] pci 0000:00:15.0: [1af4:1001] type 00 class 0x010000 [ 2.237335] pci 0000:00:15.0: reg 0x10: [io 0x0000-0x007f] [ 2.237490] pci 0000:00:15.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.238588] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 2.240587] pci 0000:00:12.0: BAR 0: assigned [mem 0x10000000-0x10ffffff pref] [ 2.241064] pci 0000:00:13.0: BAR 6: assigned [mem 0x11000000-0x1103ffff pref] [ 2.241242] pci 0000:00:12.0: BAR 6: assigned [mem 0x11040000-0x1104ffff pref] [ 2.241378] pci 0000:00:13.0: BAR 4: assigned [mem 0x11050000-0x11053fff 64bit pref] [ 2.241785] pci 0000:00:14.0: BAR 4: assigned [mem 0x11054000-0x11057fff 64bit pref] [ 2.241934] pci 0000:00:15.0: BAR 4: assigned [mem 0x11058000-0x1105bfff 64bit pref] [ 2.242104] pci 0000:00:12.0: BAR 2: assigned [mem 0x1105c000-0x1105cfff] [ 2.242262] pci 0000:00:15.0: BAR 0: assigned [io 0x1080-0x10ff] [ 2.242378] pci 0000:00:0a.2: BAR 4: assigned [io 0x1040-0x105f] [ 2.242465] pci 0000:00:13.0: BAR 0: assigned [io 0x1060-0x107f] [ 2.242561] pci 0000:00:14.0: BAR 0: assigned [io 0x1400-0x141f] [ 2.242659] pci 0000:00:0a.1: BAR 4: assigned [io 0x1420-0x142f] [ 2.245422] pci 0000:00:12.0: vgaarb: setting as boot VGA device [ 2.245599] pci 0000:00:12.0: vgaarb: bridge control possible [ 2.245740] pci 0000:00:12.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none [ 2.245901] vgaarb: loaded [ 2.248855] clocksource: Switched to clocksource MIPS [ 2.293536] NET: Registered PF_INET protocol family [ 2.295369] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.307033] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.307387] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.307575] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.307920] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear) [ 2.308401] TCP: Hash tables configured (established 2048 bind 2048) [ 2.310288] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.310718] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 2.313208] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.317337] RPC: Registered named UNIX socket transport module. [ 2.317507] RPC: Registered udp transport module. [ 2.317577] RPC: Registered tcp transport module. [ 2.317638] RPC: Registered tcp-with-tls transport module. [ 2.317699] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.319387] pci 0000:00:0a.2: enabling device (0000 -> 0001) [ 2.320672] PCI: CLS 0 bytes, default 16 [ 2.333857] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.339152] NFS: Registering the id_resolver key type [ 2.341076] Key type id_resolver registered [ 2.341195] Key type id_legacy registered [ 2.344122] Key type cifs.idmap registered [ 2.799471] xor: measuring software checksum speed [ 2.812123] 8regs : 819 MB/sec [ 2.825127] 8regs_prefetch : 785 MB/sec [ 2.837587] 32regs : 818 MB/sec [ 2.850819] 32regs_prefetch : 784 MB/sec [ 2.851037] xor: using function: 8regs (819 MB/sec) [ 2.851645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 2.851932] io scheduler mq-deadline registered [ 2.852078] io scheduler kyber registered [ 2.861223] virtio-pci 0000:00:13.0: enabling device (0000 -> 0003) [ 2.865701] virtio-pci 0000:00:14.0: enabling device (0000 -> 0003) [ 2.873888] virtio-pci 0000:00:15.0: enabling device (0000 -> 0003) [ 2.877172] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled [ 2.888482] printk: console [ttyS0] disabled [ 2.911619] serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.911823] serial8250.0: ttyS0 extra baud rates supported: 230400, 460800 [ 2.914158] printk: console [ttyS0] enabled [ 3.039660] serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 3.040673] serial8250.0: ttyS1 extra baud rates supported: 230400, 460800 [ 3.041518] serial8250 serial8250.0: unable to register port at index 2 (IO0 MEM1f000900 IRQ20): -28 [ 3.054335] bochs-drm 0000:00:12.0: vgaarb: deactivate vga console [ 3.057611] bochs-drm 0000:00:12.0: enabling device (0000 -> 0002) [ 3.059558] [drm] Found bochs VGA, ID 0xb0c5. [ 3.060170] [drm] Framebuffer size 16384 kB @ 0x10000000, mmio @ 0x1105c000. [ 3.066275] [drm] Found EDID data blob. [ 3.077525] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:12.0 on minor 0 [ 3.187963] Console: switching to colour frame buffer device 160x50 [ 3.199820] bochs-drm 0000:00:12.0: [drm] fb0: bochs-drmdrmfb frame buffer device [ 3.253939] brd: module loaded [ 3.255792] virtio_blk virtio2: 1/0/0 default/read/poll queues [ 3.265080] virtio_blk virtio2: [vda] 1139824 512-byte logical blocks (584 MB/557 MiB) [ 3.306128] uhci_hcd 0000:00:0a.2: UHCI Host Controller [ 3.309094] uhci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 [ 3.311384] uhci_hcd 0000:00:0a.2: irq 11, io port 0x00001040 [ 3.327310] hub 1-0:1.0: USB hub found [ 3.329377] hub 1-0:1.0: 2 ports detected [ 3.340204] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.342430] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.351841] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.357248] usbcore: registered new interface driver usbhid [ 3.362073] usbhid: USB HID core driver [ 3.363816] u32 classifier [ 3.364459] input device check on [ 3.365216] Actions configured [ 3.367808] NET: Registered PF_INET6 protocol family [ 3.385204] Segment Routing with IPv6 [ 3.386406] In-situ OAM (IOAM) with IPv6 [ 3.388626] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.394377] NET: Registered PF_PACKET protocol family [ 3.396395] Bridge firewalling registered [ 3.398925] Key type dns_resolver registered [ 3.400543] NET: Registered PF_VSOCK protocol family [ 3.447437] registered taskstats version 1 [ 3.467859] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 3.515101] Key type .fscrypt registered [ 3.534567] Key type fscrypt-provisioning registered [ 3.554644] Btrfs loaded, zoned=no, fsverity=no [ 3.606146] Key type encrypted registered [ 3.621445] printk: console [netcon0] enabled [ 3.645335] netconsole: network logging started [ 3.658676] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 3.947511] input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:0a.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input3 [ 3.963254] hid-generic 0003:0627:0001.0001: input: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:0a.2-1/input0 [ 4.132596] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2 [ 4.249485] IP-Config: Complete: [ 4.278725] device=eth0, hwaddr=52:54:00:12:34:02, ipaddr=192.168.7.2, mask=255.255.255.0, gw=192.168.7.1 [ 4.309408] host=192.168.7.2, domain=, nis-domain=(none) [ 4.328553] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.328818] nameserver0=8.8.8.8 [ 4.429047] clk: Disabling unused clocks [ 4.466664] md: Waiting for all devices to be available before autodetect [ 4.495809] md: If you don't use raid, use raid=noautodetect [ 4.526304] md: Autodetecting RAID arrays. [ 4.555100] md: autorun ... [ 4.585385] md: ... autorun DONE. [ 4.734062] EXT4-fs (vda): mounted filesystem e63a67a1-d50e-4035-bdcd-ef8c8ea764eb r/w with ordered data mode. Quota mode: disabled. [ 4.766613] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.803473] devtmpfs: mounted [ 4.965403] Freeing unused kernel image (initmem) memory: 408K [ 4.996579] This architecture does not have kernel memory protection. [ 5.021963] Run /sbin/init as init process [ 5.094890] process '/sbin/init.sysvinit' started with executable stack [ 10.015814] udevd[92]: starting version 3.2.14 [ 10.212749] udevd[93]: starting eudev-3.2.14 [ 31.761046] EXT4-fs (vda): re-mounted e63a67a1-d50e-4035-bdcd-ef8c8ea764eb r/w. Quota mode: disabled. hwclock: can't open '/dev/misc/rtc': No such file or directory ALSA: Restoring mixer settings... hwclock: can't open '/dev/misc/rtc': No such file or directory INIT: Entering runlevel: 5 bootlogd: writing to console: Input/output error Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. Starting rpcbind daemon... X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemumips 6.6.22-yocto-standard #1 SMP PREEMPT Tue Mar 19 21:01:07 UTC 2024 mips Kernel command line: root=/dev/vda rw ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyS0 console=ttyS1 console=ttyS0 console=tty swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 28 11:57:04 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" done. Starting bluetooth: pci id for fd 10: 1234:1111, driver (null) MESA-LOADER: failed to open bochs-drm: /usr/lib/dri/bochs-drm_dri.so: cannot open shared object file: No such file or directory (search paths /usr/lib/dri, suffix _dri) bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-37577c36e4b3aebfb2b99f6d6cdcfaa4253b81aa qemumips /dev/ttyS0 qemumips login: