[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.23-yocto-standard (oe-user@oe-host) (arm-poky-linux-gnueabi-gcc (GCC) 13.2.0, GNU ld (GNU Binutils) 2.42.0.20240216) #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00093177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] OF: fdt: Machine model: ARM Versatile PB [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] [ 0.000000] Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 [ 0.000000] Unknown kernel command line parameters "swiotlb=0", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960 [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off [ 0.000000] Memory: 241264K/262144K available (10650K kernel code, 1425K rwdata, 2836K rodata, 460K init, 339K bss, 20880K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 42296 entries in 125 pages [ 0.000000] ftrace: allocated 124 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] workqueue: name exceeds WQ_NAME_LEN. Truncating to: events_freezable_power_efficien [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] VIC @(ptrval): id 0x00041190, vendor 0x41 [ 0.000000] FPGA IRQ chip 0 "interrupt-controller" @ (ptrval), 20 irqs, parent IRQ: 47 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000238] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000738] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.006271] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval) [ 0.014760] Console: colour dummy device 80x30 [ 0.016703] Calibrating delay loop... 594.73 BogoMIPS (lpj=2973696) [ 0.073876] CPU: Testing write buffer coherency: ok [ 0.077359] pid_max: default: 32768 minimum: 301 [ 0.081039] LSM: initializing lsm=capability,landlock,integrity [ 0.082508] landlock: Up and running. [ 0.090074] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.090252] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.181634] RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.182826] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.183502] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. [ 0.184864] Setting up static identity map for 0x8400 - 0x8458 [ 0.186424] rcu: Hierarchical SRCU implementation. [ 0.186494] rcu: Max phase no-delay instances is 1000. [ 0.204595] devtmpfs: initialized [ 0.224609] VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 [ 0.226325] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.226492] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.239650] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.244827] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.266542] platform bridge: Fixed dependency cycle(s) with /vga [ 0.267867] platform vga: Fixed dependency cycle(s) with /bridge [ 0.287298] platform bridge: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.287733] amba 10120000.display: Fixed dependency cycle(s) with /bridge [ 0.288055] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.296350] amba 10120000.display: Fixed dependency cycle(s) with /amba/fpga/sysreg@0/display@0 [ 0.296745] platform 10000000.sysreg:display@0: Fixed dependency cycle(s) with /amba/display@10120000 [ 0.304422] Serial: AMBA PL011 UART driver [ 0.314926] 101f1000.serial: ttyAMA0 at MMIO 0x101f1000 (irq = 28, base_baud = 0) is a PL011 rev1 [ 0.316618] printk: console [ttyAMA0] enabled [ 0.360192] 101f2000.serial: ttyAMA1 at MMIO 0x101f2000 (irq = 29, base_baud = 0) is a PL011 rev1 [ 0.363722] 101f3000.serial: ttyAMA2 at MMIO 0x101f3000 (irq = 30, base_baud = 0) is a PL011 rev1 [ 0.366820] uart-pl011 10009000.serial: aliased and non-aliased serial devices found in device tree. Serial port enumeration may be unpredictable. [ 0.369278] 10009000.serial: ttyAMA3 at MMIO 0x10009000 (irq = 54, base_baud = 0) is a PL011 rev1 [ 0.376107] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.739039] raid6: int32x8 gen() 67 MB/s [ 1.078951] raid6: int32x4 gen() 134 MB/s [ 1.419003] raid6: int32x2 gen() 170 MB/s [ 1.759019] raid6: int32x1 gen() 426 MB/s [ 1.759600] raid6: using algorithm int32x1 gen() 426 MB/s [ 2.098986] raid6: .... xor() 211 MB/s, rmw enabled [ 2.099493] raid6: using intx1 recovery algorithm [ 2.104585] SCSI subsystem initialized [ 2.106724] usbcore: registered new interface driver usbfs [ 2.107543] usbcore: registered new interface driver hub [ 2.108287] usbcore: registered new device driver usb [ 2.122123] pps_core: LinuxPPS API ver. 1 registered [ 2.122596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.123403] PTP clock support registered [ 2.127465] Advanced Linux Sound Architecture Driver Initialized. [ 2.146041] vgaarb: loaded [ 2.153833] clocksource: Switched to clocksource arm,sp804 [ 2.283857] NET: Registered PF_INET protocol family [ 2.286727] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.299268] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.300217] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.300964] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 2.301744] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 2.302644] TCP: Hash tables configured (established 2048 bind 2048) [ 2.306521] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.307524] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.310901] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.317900] RPC: Registered named UNIX socket transport module. [ 2.318627] RPC: Registered udp transport module. [ 2.319070] RPC: Registered tcp transport module. [ 2.319509] RPC: Registered tcp-with-tls transport module. [ 2.320224] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.320989] PCI: CLS 0 bytes, default 32 [ 2.324658] NetWinder Floating Point Emulator V0.97 (double precision) [ 2.339494] workingset: timestamp_bits=14 max_order=16 bucket_order=2 [ 2.348287] NFS: Registering the id_resolver key type [ 2.350704] Key type id_resolver registered [ 2.351153] Key type id_legacy registered [ 2.358366] Key type cifs.idmap registered [ 2.624571] xor: measuring software checksum speed [ 2.636769] arm4regs : 908 MB/sec [ 2.646750] 8regs : 1166 MB/sec [ 2.656603] 32regs : 1098 MB/sec [ 2.657100] xor: using function: 8regs (1166 MB/sec) [ 2.658360] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.659089] io scheduler mq-deadline registered [ 2.659560] io scheduler kyber registered [ 2.660391] io scheduler bfq registered [ 2.672598] pl061_gpio 101e4000.gpio: PL061 GPIO chip registered [ 2.675170] pl061_gpio 101e5000.gpio: PL061 GPIO chip registered [ 2.677247] pl061_gpio 101e6000.gpio: PL061 GPIO chip registered [ 2.679110] pl061_gpio 101e7000.gpio: PL061 GPIO chip registered [ 2.680907] versatile-pci 10001000.pci: host bridge /amba/pci@10001000 ranges: [ 2.682201] versatile-pci 10001000.pci: IO 0x0043000000..0x004300ffff -> 0x0000000000 [ 2.683475] versatile-pci 10001000.pci: MEM 0x0050000000..0x005fffffff -> 0x0050000000 [ 2.684608] versatile-pci 10001000.pci: MEM 0x0060000000..0x006fffffff -> 0x0060000000 [ 2.686677] versatile-pci 10001000.pci: PCI core found (slot 11) [ 2.689270] versatile-pci 10001000.pci: PCI host bridge to bus 0000:00 [ 2.690027] pci_bus 0000:00: root bus resource [bus 00-ff] [ 2.690826] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 2.691328] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff] [ 2.691866] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff pref] [ 2.695231] pci 0000:00:0c.0: [1000:0012] type 00 class 0x010000 [ 2.696738] pci 0000:00:0c.0: reg 0x10: [io 0x0000-0x00ff] [ 2.697328] pci 0000:00:0c.0: reg 0x14: [mem 0x00000000-0x000003ff] [ 2.697811] pci 0000:00:0c.0: reg 0x18: [mem 0x00000000-0x00001fff] [ 2.702483] pci 0000:00:0d.0: [1af4:1000] type 00 class 0x020000 [ 2.703001] pci 0000:00:0d.0: reg 0x10: [io 0x0000-0x001f] [ 2.703772] pci 0000:00:0d.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.704805] pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0003ffff pref] [ 2.706311] pci 0000:00:0e.0: [1af4:1005] type 00 class 0x00ff00 [ 2.706821] pci 0000:00:0e.0: reg 0x10: [io 0x0000-0x001f] [ 2.707303] pci 0000:00:0e.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.708533] pci 0000:00:0f.0: [1b36:000d] type 00 class 0x0c0330 [ 2.709022] pci 0000:00:0f.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit] [ 2.710261] pci 0000:00:10.0: [1af4:1050] type 00 class 0x038000 [ 2.710825] pci 0000:00:10.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.712112] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [ 2.712624] pci 0000:00:11.0: reg 0x10: [io 0x0000-0x007f] [ 2.713083] pci 0000:00:11.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref] [ 2.715721] PCI: bus0: Fast back to back transfers disabled [ 2.717774] pci 0000:00:0d.0: BAR 6: assigned [mem 0x60000000-0x6003ffff pref] [ 2.718581] pci 0000:00:0d.0: BAR 4: assigned [mem 0x60040000-0x60043fff 64bit pref] [ 2.719359] pci 0000:00:0e.0: BAR 4: assigned [mem 0x60044000-0x60047fff 64bit pref] [ 2.719970] pci 0000:00:0f.0: BAR 0: assigned [mem 0x50000000-0x50003fff 64bit] [ 2.720539] pci 0000:00:10.0: BAR 4: assigned [mem 0x60048000-0x6004bfff 64bit pref] [ 2.721125] pci 0000:00:11.0: BAR 4: assigned [mem 0x6004c000-0x6004ffff 64bit pref] [ 2.721727] pci 0000:00:0c.0: BAR 2: assigned [mem 0x50004000-0x50005fff] [ 2.722252] pci 0000:00:0c.0: BAR 1: assigned [mem 0x50006000-0x500063ff] [ 2.722797] pci 0000:00:0c.0: BAR 0: assigned [io 0x1000-0x10ff] [ 2.723319] pci 0000:00:11.0: BAR 0: assigned [io 0x1400-0x147f] [ 2.724095] pci 0000:00:0d.0: BAR 0: assigned [io 0x1480-0x149f] [ 2.724619] pci 0000:00:0e.0: BAR 0: assigned [io 0x14a0-0x14bf] [ 2.726792] pci 0000:00:0f.0: enabling device (0100 -> 0102) [ 2.730147] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 2.731863] clcd-pl11x: probe of 10120000.display failed with error -2 [ 2.735488] virtio-pci 0000:00:0d.0: enabling device (0100 -> 0103) [ 2.739054] virtio-pci 0000:00:0e.0: enabling device (0100 -> 0103) [ 2.740793] virtio-pci 0000:00:10.0: enabling device (0100 -> 0102) [ 2.743890] virtio-pci 0000:00:11.0: enabling device (0100 -> 0103) [ 2.747558] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.785051] random: crng init done [ 2.799615] [drm] pci: virtio-gpu-pci detected at 0000:00:10.0 [ 2.800807] [drm] features: -virgl +edid -resource_blob -host_visible [ 2.800857] [drm] features: -context_init [ 2.802200] [drm] number of scanouts: 1 [ 2.802554] [drm] number of cap sets: 0 [ 2.820106] [drm] Initialized virtio_gpu 0.1.0 0 for 0000:00:10.0 on minor 0 [ 2.982952] Console: switching to colour frame buffer device 160x50 [ 3.017595] virtio-pci 0000:00:10.0: [drm] fb0: virtio_gpudrmfb frame buffer device [ 3.031835] versatile-tft-panel 10000000.sysreg:display@0: no panel detected [ 3.035030] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.119511] brd: module loaded [ 3.120732] virtio_blk virtio3: 1/0/0 default/read/poll queues [ 3.127461] virtio_blk virtio3: [vda] 959352 512-byte logical blocks (491 MB/468 MiB) [ 3.148801] physmap-flash 34000000.flash: versatile/realview flash protection [ 3.163584] physmap-flash 34000000.flash: physmap platform flash device: [mem 0x34000000-0x37ffffff] [ 3.167364] 34000000.flash: Found 1 x32 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000000 Chip ID 0x000000 [ 3.168795] Intel/Sharp Extended Query Table at 0x0031 [ 3.170189] Using buffer write method [ 3.227062] smc91x: not found (-19). [ 3.228425] arm-charlcd 10008000.lcd: error -ENXIO: IRQ index 0 not found [ 3.229192] arm-charlcd 10008000.lcd: initialized ARM character LCD at 10008000 [ 3.269718] rtc-ds1307 0-0068: registered as rtc0 [ 3.279515] rtc-ds1307 0-0068: setting system clock to 2024-04-09T23:42:01 UTC (1712706121) [ 3.287849] rtc-pl031 101e8000.rtc: registered as rtc1 [ 3.289323] i2c_dev: i2c /dev entries driver [ 3.291039] versatile reboot driver registered [ 3.296305] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@redhat.com [ 3.307097] mmci-pl18x fpga:0b: mmc1: PL181 manf 41 rev0 at 0x1000b000 irq 49,50 (pio) [ 3.321764] mmci-pl18x fpga:05: mmc0: PL181 manf 41 rev0 at 0x10005000 irq 59,60 (pio) [ 3.326867] leds-syscon 10000008.0.led: registered LED (null) [ 3.329391] leds-syscon 10000008.1.led: registered LED (null) [ 3.330522] leds-syscon 10000008.2.led: registered LED (null) [ 3.331602] leds-syscon 10000008.3.led: registered LED (null) [ 3.332614] leds-syscon 10000008.4.led: registered LED (null) [ 3.335640] leds-syscon 10000008.5.led: registered LED (null) [ 3.337504] leds-syscon 10000008.6.led: registered LED (null) [ 3.338634] leds-syscon 10000008.7.led: registered LED (null) [ 3.340375] ledtrig-cpu: registered to indicate activity on CPUs [ 3.347495] input: AT Raw Set 2 keyboard as /devices/platform/amba/amba:fpga/10006000.kmi/serio0/input/input0 [ 3.350492] usbcore: registered new interface driver usbhid [ 3.350972] usbhid: USB HID core driver [ 3.396599] aaci-pl041 10004000.aaci: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 3.397358] aaci-pl041 10004000.aaci: FIFO 512 entries [ 3.399367] u32 classifier [ 3.399626] input device check on [ 3.399951] Actions configured [ 3.402308] NET: Registered PF_INET6 protocol family [ 3.416607] Segment Routing with IPv6 [ 3.417359] In-situ OAM (IOAM) with IPv6 [ 3.418701] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.425104] NET: Registered PF_PACKET protocol family [ 3.426450] Bridge firewalling registered [ 3.428098] Key type dns_resolver registered [ 3.429686] NET: Registered PF_VSOCK protocol family [ 3.494651] registered taskstats version 1 [ 3.564340] Key type .fscrypt registered [ 3.564884] Key type fscrypt-provisioning registered [ 3.579360] Btrfs loaded, zoned=no, fsverity=no [ 3.591395] Key type encrypted registered [ 3.600404] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.601255] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.602878] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.608471] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 3.609256] clcd-pl11x: probe of 10120000.display failed with error -2 [ 3.610931] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 3.613415] printk: console [netcon0] enabled [ 3.615256] netconsole: network logging started [ 4.038673] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/amba/amba:fpga/10007000.kmi/serio1/input/input2 [ 4.053044] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 4.054348] clcd-pl11x: probe of 10120000.display failed with error -2 [ 4.065057] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 4.133195] IP-Config: Complete: [ 4.135787] device=eth0, hwaddr=52:54:00:12:34:04, ipaddr=192.168.7.4, mask=255.255.255.0, gw=192.168.7.3 [ 4.137090] host=192.168.7.4, domain=, nis-domain=(none) [ 4.137669] bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath= [ 4.137774] nameserver0=8.8.8.8 [ 4.145617] clk: Disabling unused clocks [ 4.146578] ALSA device list: [ 4.147000] #0: ARM AC'97 Interface PL041 rev0 at 0x10004000, irq 40 [ 4.162901] md: Waiting for all devices to be available before autodetect [ 4.164232] md: If you don't use raid, use raid=noautodetect [ 4.164871] md: Autodetecting RAID arrays. [ 4.165320] md: autorun ... [ 4.165661] md: ... autorun DONE. [ 4.311868] EXT4-fs (vda): mounted filesystem b50daa90-2d53-4e37-9044-bfdad3104d47 r/w with ordered data mode. Quota mode: disabled. [ 4.313473] VFS: Mounted root (ext4 filesystem) on device 253:0. [ 4.318414] devtmpfs: mounted [ 4.378728] Freeing unused kernel image (initmem) memory: 460K [ 4.379327] Kernel memory protection not selected by kernel config. [ 4.380206] Run /sbin/init as init process INIT: version 3.04 booting warning: FBIOPUT_VSCREENINFO failed, double buffering disabled Starting udev [ 9.328219] udevd[96]: starting version 3.2.14 [ 9.637731] udevd[97]: starting eudev-3.2.14 [ 14.626388] clcd-pl11x 10120000.display: PL110 designer 41 rev0 at 0x10120000 [ 14.627060] clcd-pl11x: probe of 10120000.display failed with error -2 [ 14.628360] drm-clcd-pl111 10120000.display: set up callbacks for Versatile PL110 [ 14.634074] amba 10100000.smc: deferred probe pending [ 14.634498] amba 10110000.mpmc: deferred probe pending [ 14.634917] amba 101e0000.sctl: deferred probe pending [ 14.635333] amba 101e1000.watchdog: deferred probe pending [ 14.635760] amba 101f0000.sci: deferred probe pending [ 14.636152] amba 101f4000.spi: deferred probe pending [ 14.636545] amba 1000a000.sci: deferred probe pending [ 14.636936] amba 10120000.display: deferred probe pending [ 37.865717] EXT4-fs (vda): re-mounted b50daa90-2d53-4e37-9044-bfdad3104d47 r/w. Quota mode: disabled. ALSA: Restoring mixer settings... alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 No state is present for card Interface alsa-lib /usr/src/debug/alsa-lib/1.2.11/src/ucm/main.c:1554:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2 Found hardware: "aaci-pl041" "National Semiconductor LM4549" "AC97a:4e534331" "" "" Hardware is initialized using a generic method No state is present for card Interface INIT: Entering runlevel: 5 Configuring network interfaces... ip: RTNETLINK answers: File exists Starting system message bus: dbus. Starting Connection Manager Starting Xserver Starting Dropbear SSH server: dropbear. X.Org X Server 1.21.1.11 X Protocol Version 11, Revision 0 Current Operating System: Linux qemuarmv5 6.6.23-yocto-standard #1 PREEMPT Thu Mar 28 16:04:47 UTC 2024 armv5tejl Kernel command line: root=/dev/vda rw mem=256M ip=192.168.7.4::192.168.7.3:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0 console=ttyAMA0 console=ttyAMA1 swiotlb=0 printk.time=1 Current version of pixman: 0.42.2 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 9 23:42:50 2024 (==) Using system config directory "/usr/share/X11/xorg.conf.d" Starting rpcbind daemon...done. Starting bluetooth: bluetoothd. Starting syslogd/klogd: done * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon ...done. Starting Telephony daemon Poky (Yocto Project Reference Distro) 4.3+snapshot-d95e355fdeeb1e779d519505847c602bb93a681c qemuarmv5 /dev/ttyAMA0 qemuarmv5 login: D-BUS per-session daemon address is: unix:path=/tmp/dbus-nGuYHNFfaF,guid=d3782fdc25882bc2fd13d2b36615d28f Using calibration data stored in /etc/pointercal.xinput [settings daemon] Forking. run with -n to prevent fork matchbox: Cant find a keycode for keysym 269025056 matchbox: ignoring key shortcut XF86Calendar=!$contacts matchbox: Cant find a keycode for keysym 2809 matchbox: ignoring key shortcut telephone=!$dates matchbox: Cant find a keycode for keysym 269025050 matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop Connection failure: Connection refused pa_context_connect() failed: Connection refused dbus-daemon[530]: Activating service name='org.a11y.atspi.Registry' requested by ':1.0' (uid=0 pid=511 comm="connman-applet") dbus-daemon[530]: Successfully activated service 'org.a11y.atspi.Registry' SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry